Digital Commons Network^™

Measuring The Impact Of Programmed Depot Maintenance Funding Shortfalls On Weapon System Availability, Donald F. Hurry

Theses and Dissertations

This study used the Poisson regression technique, bootstrap estimates, and the Kaplan-Meier estimates for survivor curves to determine the impact of Programmed Depot Maintenance (PDM) on weapon system availability. More specifically, these techniques estimated the effect in the number failures per year due to PDM, but the bootstrap technique also estimated the effect in the amount of downtime experienced by a weapon system due to PDM. Although the Poisson regression model did not pass the rigors of statistical testing, the Poisson regression suggested differences in the number of failures per year between PDM and no-PDM weapon systems. The results of …

Procedures For Testing Deterministic Scheduling Models: A Dakota Case Study, Keith H. Mccready

Theses and Dissertations

The DAKOTA scheduling system has been proposed for use in the United States Air Forces Europe's (USAFE's) Operational Support Airlift (OSA) scheduling. This thesis examines the OSA scheduling topic and reviews the relevant literature on vehicle routing, concluding that exact methods are intractable for large problem sizes. Consequently, heuristic methods must be considered. This thesis takes a detailed look at the DAKOTA heuristic. It examines the concepts of Validation, Verification and Accreditation (VV&A), particularly as they apply to heuristics and algorithms. It then defines what measures of performance may prove useful in judging heuristics and algorithms in general, and details …

A Methodology To Assess The Air Force Materiel Command's Exercise Support Program's Weighting Scheme, Gilbert D. Ness

Theses and Dissertations

This research performs analysis on the Air Force Materiel Command's Exercise Support Program's Weighting Scheme so that decision makers can create a more efficient and effective Resource Allocation - Integrated Process Team (RA-IPT) manpower allocation process. A linear programming (LP) model was derived from the Exercise Support Program (ESP) to assign manpower reductions throughout the Mission Element Board (MEB) organizational level in AFMC. Parametric analysis was performed on the LP model by simultaneously changing multiple objective function coefficients with the use of various direction vectors. These direction vectors were applied with the use of an incrementally increasing scalar step size …

An Investigation Of Preliminary Feature Screening Using Signal-To-Noise Ratios, David B. Sumrell

Theses and Dissertations

A new saliency metric and a new saliency screening method are developed. This new metric, the SN saliency metric, is based upon signal-to-noise ratios, where the signal is provided by a sum of squared weights associated with a given feature, and the noise is based upon a sum of squared weights associated with a reference noise feature which is injected into the data. The resultant metric allows for a direct comparison of the feature of interest with a reference noise feature which is known to be nonsalient. The SN saliency screening method, which uses the SN saliency metric, offers the …

A Response Surface Methodology Approach To Groundwater Model Calibration, Jeffrey B. Rowland

Theses and Dissertations

This thesis examined the effect of parameter bounding, a reduced data set, and data enrichment techniques on a response surface methodology (RSM) approach to groundwater model calibration. The four phases of the study included a calibration using a very dense data matrix, a calibration using a sparse calibration matrix, an evaluation of several data enrichment techniques, and a calibration using a data matrix enlarged with the use of the best enrichment technique. All calibrations were conducted using only a first order approximation to the response surface and with bounds placed on the input parameters. The first two calibrations using the …

Optimization Analysis For Design And Planning Of Multi-Project Programs, Victor D. Wiley

Theses and Dissertations

Program Management concerns the long-term planning, coordination, and control of major technological, engineering, scientific, and/or developmental activities. In general, programs tend to be exceptionally large, consisting of several parallel or sequential projects or groups of projects. While many of the approaches developed for projects have been used in program management, there are critical differences between programs and projects. A key difference is the magnitude of programs, both in program duration and number of tasks to be coordinated. In addition, project parameters are driven by program decisions. While a large number of modeling efforts have focused at the project level, very …

Applying Response Surface Methodology To Readiness-Based Leveling Of Reparable Items, Todd E. May

Theses and Dissertations

Reparable items play a large role in determining the readiness of United States Air Force weapon systems. Many factors characterizing flying tempo and item repair and transit time influence the level of fleet readiness. Readiness-Based Leveling (RBL) considers these factors as it seeks to maximize aircraft readiness as it allocates spare reparable items between bases and a depot. The purpose of this research was to demonstrate the validity of using response surface methodology (RSM) within the context of RBL in an effort to quantify the influences these factors have on aircraft readiness. RSM applied designed experiments and least squares regressions …

Statistical Process Control In Medical Surveillance. An Application Using Spirometry, Paul W. Mcaree

Theses and Dissertations

This research effort concentrated on applying statistical process control techniques to the results of seven years worth of spirometry exams of workers at Wright-Patterson AFB in helping the occupational health squadron identify potential work hazard areas. Each spirometry exam was classified as abnormal or normal based on a comparison with established normals or a significant loss of function from the previous year's exam for the individual. Each test was classified into the work area of the individual and the number of abnormalities per population of the work area was examined.

Surveillance Plan For Monitoring The Shelf-Life Of Chemical Defense Coveralls, Robert E. Neher Jr.

Theses and Dissertations

This thesis found a surveillance plan to be used to monitor the shelf-life of the Air Force's chemical defense coveralls. The sampling tests are destructive and the objective was to find a surveillance plan that would minimize the number of suits sampled yet provide enough information to accurately determine if the chemical defense coveralls had degraded past a minimum acceptable level. Six sampling plans were developed and analyzed. The sampling plans included the Air Force's original fixed sampling plan, several variations of sequential sampling plans, a Bayesian sampling plan, and an ad hoc pre-posturing plan. Each of the sampling plans …

Development Of A Decision Support System For The Department Of Energy's Selection Of Waste Site Remediation Technologies, Brian E. Ralston

Theses and Dissertations

The Department of Energy is faced with the complex decision of selecting technologies for waste site remediation. This research focused on developing a decision support system to aid the decision maker in selecting the best strategy of remediation technologies. A decision analysis model was developed which incorporates life cycle cost data, risk information, and user input, to analyze the technology choices. The research outlined the use of multiple attribute utility theory using exponential attribute utility functions with a simple additive objective function. The best available data was used to demonstrate the capabilities of the model. The model provides the decision …

Statistical Process Control And Medical Surveillance. An Application With Liver Function Tests, Bryan D. Richardson

Theses and Dissertations

Traditionally, medical surveillance of liver disease generally involves a battery of tests. This research used multivariate analysis techniques to reduce the number of measures required to identify liver dysfunction and found using a Transferase Index (a combination of three tests; ALT, AST, and GGT) provided the most satisfying assessment, but the single best indicator, ALT, may be sufficient. Transferase Index and ALT criterion were both applied to SPC control charts. Through the use of statistical process control (SPC), this research identified work zones possessing signs of adverse effects to an individual's liver as a possible result of their work environment …

Constraints On Initial Ahs Deployment And The Concept Definition Of A Shuttle Service For Ahs Debut, H.-S. Jacob Tsao

Faculty Publications

The concept of automated highway system (AHS) was motivated primarily by its potential for large capacity and safety gains without requiring significant right-of-way acquisition. However, highway automation involves a multitude of design options as well as systems issues. Compounded by the crucial dimension of evolving the current highway system towards the mature AH& there exist a large number of possible evolutionary paths to AHS. Perhaps due to the immense complexity, little attention has been paid to the evolution dimension.Particularly important and difficult in defining a deployment sequence is the very first step,i.e. the first user service involving fully automated (hands-off …

Stage Definition For Ahs Deployment And An Ahs Evolutionary Scenario, H.-S. Jacob Tsao

Faculty Publications

The concept of automated highway systems (AHS) as a means to solve the fast-worsening highway congestion problem has received renewed attention recently. Pros and cons of various mature AHS have been a subject of intense study. However, such discussions are nothing but intellectual exercises unless the issue of how to evolve the current highway systems towards these mature AHS can be resolved. There exist a large number of different possible mature AHS. The additional dimension of evolution leads to an even larger number of possible evolutionary scenarios. This paper proposes an approach to defining evolutionary scenarios and illustrates it with …

Acuta Enews February 1996, Vol. 25, No. 2

ACUTA Newsletters

In This Issue

From the President

The Michelangelo Virus

DC at a Glance

UCLA Switches on Its 6800

From ACUTA Headquarters

Integrating Key Functions In Product Development : A Conceptual Product Development Model For The Korean Context, Jong-Wook Kim

Theses

The high-tech market is characterized by market uncertainty, technology uncertainty and rapid change. To survive in this risky high-tech market, a company must create competitively effective product development practices that meet its own unique needs and circumstances.

One effective practice is cross-functional integration in the product development process. The advantages of integration include a shortened time to market, successful transformation of research results to production, productivity improvement, innovation project success, and high-quality problem solutions. However, these advantages are rarely obtained in the current product development practices of Korean companies. Their product development efforts are generally characterized by time consuming sequential …

Acuta Enews January 1996, Vol. 25, No. 1

ACUTA Newsletters

In This Issue

From the President

SIUE $1.1 Million Phone Scam

NUI Implements ADSI Technology

Sewanee Campus Hooked up to Info Highway

ACUTA Listserves

From ACUTA Headquarters

Linear Programming With Inequality Constraints Via Entropic Perturbation, Jacob Tsao, Shu-Cherng Fang

Faculty Publications

A dual convex programming approach to solving linear programs with inequality constraints through entropic perturbation is derived. The amount of perturbation required depends on the desired accuracy of the optimum. The dual program contains only non-positivity constraints. An ϵ-optimal solution to the linear program can be obtained effortlessly from the optimal solution of the dual program. Since cross-entropy minimization subject to linear inequality constraints is a special case of the perturbed linear program, the duality result becomes readily applicable. Many standard constrained optimization techniques can be specialized to solve the dual program. Such specializations, made possible by the simplicity of …

Incorporating Matlab's Signal Processing Toolbox Into A Dsp Course At An Undergraduate E.E. Program, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

This paper provides some suggestions for incorporating MATLAB's Signal Processing Toolbox into a DSP course. Often, in a DSP course, students have difficulties understanding abstract and non-intuitive concepts and seeing their relevance to the practical part of their curriculum. The tools offered by MATLAB's Signal Processing Toolbox, can help to make these concepts more tangible and provide a perspective for students. Some basic tools relevant to an undergraduate DSP course will be introduced, including examples of tool use and graphic results. The tools presented will be applied in the areas of synthesis and analysis of signals, FFT computation, impulse response …

A New Creep-Fatigue Life Prediction Model, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

A published creep-fatigue life prediction model is modified in this paper and assessed with data on Inconel 718 under different test conditions. It has been shown that the method developed within the viscosity concepts correlates the low-cycle fatigue data well. This paper reports the modification over the previous model.

On The Complexity Of Manpower Shift Scheduling, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

We consider the shift assignment problem in manpower scheduling, and show that a restricted version of it is NP-hard by a reduction from 3SAT. We then present polynomial algorithms to solve special cases of the problem and show how they can be deployed to solve more complex versions of the shift assignment problem. Our work formally defines the computational intractibility of manpower shift scheduling and thus justifies existing works in developing manpower scheduling systems using combinatorial and heuristic techniques.

An Approach To Just-In-Time Implementation In Discrete Parts Manufacturing, Phillip Gregory Shirey

Masters Theses

"Just-In-Time manufacturing is a philosophy that encourages waste reduction and the elimination of non-value-added activities. The processes affected include office and shop personnel. When successfully implemented, JIT accounts for improved production lead time cycles, reduced inventories, improved employee morale, reduced cost of goods, and continuous improvements of the total business process.

This thesis identifies real world problems many medium size U.S. manufacturing companies now face, and an approach to JIT implementation in discrete parts manufacturing. The approach includes developing strategies to motivate the employees and to implement the tools and techniques of JIT, Total Quality Management, ISO 9001, and MRP …

The Effects Of Post Inoculant Additions On Ductile Iron Fade, Travis James Frush

Dissertations and Theses @ UNI

This study involved the investigation of three specific, commercially available, post inoculants for ductile iron and their effect on the magnesium fading rate and chill reducing tendency in a low volume production environment. Although fading effects of ductile iron have been extensively investigated, in general, they apply to high volume production operations. Unfortunately, for the smaller foundry operations, many of the process solutions proposed for the prevention of the fading effects are not applicable or practical. In addition to the small production operations, new process technologies are also excluded from many of these process solutions. For this reason, a study …

Effects Of Refrigeration And Cryogenic Treatments On Austempered Ductile Iron, Gerard R. Thiel

Dissertations and Theses @ UNI

Low temperature treatment, as a method of improving mechanical properties of metals, has been studied and used for well over 60 years. Until recently these treatments have been limited to hardness and wear improvements of high alloy irons and steels. The purpose of this research is to determine the effects of refrigeration and cryogenic treatments on the mechanical properties, including hardness and tensile strength of austempered ductile iron.

This research included the production of a high strength ductile iron of low alloy content capable of being used in either the as cast, conventionally heat treated or austempered condition. Refrigeration and …

Ultrasound Modified Ferric Hydroxide/Cupric Ion Adsorption And Sequestration At Varying Ph Levels, Humberto Campos

Dissertations and Theses @ UNI

This study was undertaken to determine if hydrous metal oxide adsorption, an important treatment method used to remove adsorbates from aqueous solution, could be enhanced through ultrasonic irradiation. A model system based on preformed hydrous ferric oxide as the adsorbent and copper as the adsorbate was investigated. Brief exposure of the preformed hydrous ferric oxide floe to intense ultrasonic radiation (ca. 13 Watts/cm2 ) in the presence of copper species effectively disrupted the flocculated particles permitting the copper adsorbate to access adsorption sites previously isolated within the floe. The experimental data indicate that ultrasonic disruption of pre-formed hydrous ferric oxide …

An Investigation Into Manufacturing Execution Systems, K. W. Duley

Theses : Honours

Hardware and software developments of this decade have exposed an hiatus between business/management applications and process control in heavy industry in the implementation of computer technology. This document examines the development of discrete manufacturing and of relevant implementations of computing. It seeks to examine and to clarify the issues involved in a perceived current drive to bridge this gap, to integrate all the systems in a manufacturing enterprise in a Manufacturing Execution System (MES) in order to address two hypotheses: I) That overseas trends towards the development of manufacturing execution systems have application in the Australian industrial context. 2) That …

A Decision Support Model For Large Systems Using Quality Function Deployment And Goal Programming: A Capital Budgeting Problem, Kenneth Lindsey Jr.

Engineering Management & Systems Engineering Theses & Dissertations

Effective planning for the modernization of U.S. Air Force fighter aircraft requires a perception of the future tasks these aircraft will be called upon to perform, and the improvements and modifications that will be required to successfully accomplish those tasks. A great deal of research has been done in the areas of military strategy, quality function deployment, capital budgeting, and goal programming, as separate areas of study. This thesis details the research and analysis performed for a project called The Fighter Configuration Plan (FICOP), in which these areas were integrated in a decision support model to aid the Air Force …

Dynamic Scale Genetic Algorithm: An Enhanced Genetic Search For Discrete Optimization, Bela Dange Joshi

Engineering Management & Systems Engineering Theses & Dissertations

The minimization of operations and support resources of reusable launch vehicles is a complex task, involving discrete optimization and the simulation domain. Genetic algorithms, offering a robust search strategy suitable for integer variables and the simulation domain, can be applied to minimize these resources. This research developed an enhanced genetic algorithm for problems with a linear objective function, the most common class of discrete optimization problems. The dynamic scale genetic algorithm developed here incorporates concepts of implicit enumeration to enhance search. This is achieved by utilizing problem specific information to refine the solution space over successive generations. The utility of …

Issues And Challenges In Validating Military Simulation Models, Michael R. Elmer

Theses and Dissertations

The purpose of this thesis is to address the challenges of validating simulation models, especially those challenges facing military simulation analysts. Three distinct issues are of concern to the military simulation analyst: (1) What type of validation effort do the academic experts recommend? (2) What does the military policy say is necessary for a proper validation effort? (3) What can a simulation practitioner realistically accomplish given time and resource constraints? Four methodologies were chosen to represent the academic perspective on validation. A model of validation methods is integrated from the methodologies of these four simulation validation references. The validation policies …

Global Optimization Studies On The 1-D Phase Problem, Martin Zwick, Byrne Elliot Lovell, Jim Marsh

Complex Systems Faculty Publications and Presentations

The Genetic Algorithm (GA) and Simulated Annealing (SA), two techniques for global optimization, were applied to a reduced (simplified) form of the phase problem (RPP) in computational crystallography. Results were compared with those of "enhanced pair flipping" (EPF), a more elaborate problem-specific algorithm incorporating local and global searches. Not surprisingly, EPF did better than the GA or SA approaches, but the existence of GA and SA techniques more advanced than those used in this study suggest that these techniques still hold promise for phase problem applications. The RPP is, furthermore, an excellent test problem for such global optimization methods.

Cycle Time Estimation For Simulating A Tandem Queueing Systems Using Aggregation Techniques, Paul Savory, Gerald Mackulak

Department of Industrial and Management Systems Engineering: Faculty Publications

One approach to simulating a single-server tandem queuing system is to explicitly model each of the production stages. In this paper, we apply queueing theory, a recursive algorithm, and composite random number sampling to develop an equivalent aggregate representation consisting of only a single production stage. Preliminary test results indicate that the aggregation works well for estimating the mean and variability of the total cycle time.