Digital Commons Network^™

Development And Realization Of A Single-Mode Optical Fiber Ferrule Mold Insert With Twelve Channels, Hsiharng William Yang

Doctoral Dissertations

A manufacturing process for an optical fiber ferrule mold insert with twelve channels has been established. This research project presents mask design, mask fabrication, deep X-ray lithography exposure, resist developing, nickel electroforming, as well as surface finishing to attain the final result. Deep X-ray mask fabrication methods are explored, including mechanically machined masks, micro-EDM masks, and E-beam written masks. The exposures to pattern resists and electroforming to fabricate nickel molds up to 500 $\mu$m thickness are reported in this study. Nickel structures for the optical fiber ferrule insert with twelve channels made by electroforming are the final products. A practical …

Sustaina Bility Of Irrigation Schemes For Small-Scale Farmers: A Case Study Of Irrigation Scheme At Buleya Malima, Gwembe Valley, Zambia, Masinja R

Tanzania Journal of Engineering and Technology (TJET)

A study to determine facrors influencing sustainability of smallholder irrigation schemes was carried our a! Buleya Malima, Southern Province, 7_nnzbia. These factors included technical and socio-economic factors. found Out that the technical factors were 26.5, 64.5 and 9.2 percent for application efficiency, tailwater ratio and deep percolation, respectively, indicating that farmers wasted water mainly through tailwater runoff.From socio-economic point of view, the study indicated that the scheme lacked (i) farmer participation in designing and planning operation of the scheme (ii) managerial ability and innovativeness to form their own viable organisation: and (iii) formal training in technical operations of irrigation, infrastructure …

Consortia As Technology Innovation Management Vehicles: Toward A Framework For Success In Venture Based Public-Private Partnerships, Ralph B. Saunders Ii

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to explore the approach by federal/state agencies, university, and private sector consortia to develop and manage commercialization of innovation technologies. The evaluation, support, and management of technologically based consortia has traditionally been held in the private sector. There is a somewhat mature literature guiding innovation management (Utterback 1996; Rosenberg et al. 1994; Quinn 1997, 1992) in the private sector. However, there is an increasing emergence of consortia consisting of universities, industrial/private sector entities, and government agencies joining in collaborative efforts to launch technology based initiatives. These consortia are non-traditional and the applicability of traditional …

Meta-Ethnographic Development Of A Dialogue Methodology Applied To Organization Discourse, Shelley P. Gallup

Engineering Management & Systems Engineering Theses & Dissertations

A gap exists between theoretical stances that acknowledge the importance of dialogue as a dynamic within socially constructed structures, and "steersmanship" of those constructs--e.g., directing, intervening or transforming organizations. A "mechanism" which links theory with practice is missing, leaving practitioners with an acknowledgment of dialogue's central position, but without tools to enact this centrality in practice or research. This research constructs a conceptual model of dialogue, derived from the literature. Using this model as a base, the research seeks to generate a dialogue methodology bridging theory and practice with respect to organizational dialogue. The model, methodology, and research results are …

A Mentoring Guide For Female Faculty In Engineering, Susan L. Murray, Linda M. Manning, Catherine A. Riordan, Elizabeth Cummins, Philip B. Thompson

Engineering Management and Systems Engineering Faculty Research & Creative Works

One widely accepted method for increasing the chances of success of female engineering and science students and faculty alike is to provide access to female role models and mentors. In this article we offer to new female faculty, and to those who would mentor them, an annotated list of text and electronic resources that address most of the most important challenges facing new female faculty in science and engineering.

A Technology Assessment Survey For Web Based Higher Education Programs, Earl A. Evans, Susan L. Murray

Engineering Management and Systems Engineering Faculty Research & Creative Works

Advances in communications and computer technology, as well as in human-computer interfaces, have enabled concurrent advances in Web-based education. A number of case studies concerning applications of Web-based education for both distance learning and on-campus programs have been published. Primarily, these studies have focused on individual assessments of the web-based technologies. In contrast, this paper will provide a broad based assessment of applied web-based technology for higher education. This research was conducted via a survey completed by university and college faculty from numerous 4-year institutions. To gain an effective assessment, eleven categories of web-based course delivery tools, such as chatrooms …

Effectiveness Of An On-Line Graduate Engineering Management Course: A Preliminary Study, Rosemarie Maffei Evans, Madison Daily, Susan L. Murray

Engineering Management and Systems Engineering Faculty Research & Creative Works

In the summer of 1997, the University of Missouri-Rolla's (UMR) Engineering Management Department began offering its first completely Web-based course. This graduate level course, Advanced Production Management, was designed to utilize a combination of Web-based tools to create a conducive, yet non-traditional, learning environment for its students. The students in the course did not physically have to attend any lectures and only met for an initial and final class period. The remainder of the course was conducted exclusively via Web-based tools. Accordingly, the Engineering Management Department commenced a research effort to determine the effectiveness of this new learning environment. This …

Aggregate Production Planning In A Stochastic Environment, Ashraf Samy Naguib

Archived Theses and Dissertations

No abstract provided.

Kiln Design And Fuel Wood Consumption In Fish Smoking, E Mushi

Tanzania Journal of Engineering and Technology (TJET)

In this paper. a load flow solution for the Medium Voltage (MY) three-phase radial distribution in delta-delta (A — A) connected network supplying different line topologies such as three phase, phase to phase and single-wire earth return (SWER) networks is presented. The general voltage related network equations are developed using Kirchhoff's voltage and current laws. Development ofa solution to the loadflow analysis applying the developed general voltage related network equations is proposed in order to evaluate the network voltage profile. Various numbers of arrays are developed for the identification of the network under study. The proposed method is a new …

Trends Of Microcomputer Technology In Developing Countries, With More Focus On Tanzanian Experiences: Achievements And Problems, Satoki Mahenge

Tanzania Journal of Engineering and Technology (TJET)

Trends of microcomputer technology in developing countries, including Tanzanian. is like a 'mixed bag' of achievement and problems. Although rhe technology has been available for many years in developed world, developing countries are responding to it differently due to differences in political and economic policies. Some countries have acrimonious policies on the technology, some not. There are countries which utilize fully the technology in work places and others are still at dilemma on the importation of the technology due to what is 'claimed to be a weak economy in the presence Of many other pressing needs'. Other countries seem to …

Experimental Study Of Rural Brick Burning In Iringa And Mbeya Regions, E Mushi

Tanzania Journal of Engineering and Technology (TJET)

In this paper results are presented Of a study conducted between June and December 1997. on nine brick firing kilns in Iringa and Mbeya. The locations for rhe study were Mahenje and Iloniba in Mbeya Region and Igumbilo in Iringa region. Three kilns were investigated in each location. For each kiln the process was followed from the laying Of the bricks into a kiln to the opening Of thc kiln for renu)val Of the bricks in preparation for the selling. Different weights and tenperatures were Taken a,' different times. Firing wet bricks results in consumption of 33.63 % of the …

Design Considerations For A Three-Phase Fluidized-Bed Bioreactor, S Manyele

Tanzania Journal of Engineering and Technology (TJET)

The design Of a three-phase fluidized bed bioreactor using novel biomass support for industrial wastewater treatment is reported in this paper. A column of 0.20 m diameter with variable height up to 6.60 m equipped with a foam breaker tank was designed, commissioned and operated. A novel biomass support, KMTR support, has been used Separate gas and liquid feeding systems were designed to facilitate proper bioreactor operation. A flat distriburor plate with 4 mm holes- diameter was desined A study on the hydrodynamic properties of the three-phase fluidized bed bioreactor revealed high values of bed expansion and air hold-ups. Purification …

Psychophysically Derived Work Frequencies For Manual Pouring Operations In The Foundry, Sadat Karim

Masters Theses

This paper presents a study on a combination lift and carrying task and was designed to simulate a metal pouring operation commonly found in foundries. Two laboratory experiments were conducted. The first experiment was designed to study the effects of two different mold heights (0.6096 m. and 0.4572 m.) and two carrying distances (1.2192 m. and 4.572 m.) on physiological response variables and on subjects' rating of perceived exertion while performing a simulated pouring operation at a documented foundry frequency. The second experiment was designed to determine maximum acceptable task frequencies (MAF) for males performing a simulated pouring operation at …

Acuta Enews June 1998, Vol.27, No. 6

ACUTA Newsletters

In This Issue

CICs Go to 4 Digits June 30

Winners Announced in Second Annual Student Papers Competition

Board Report

Do You Have a Story?

UNM Admissions Goes Online

FYI: Digital Decay

PRI ISDN at UMSL

DC at a Glance

Positions Available

Welcome New Members

Acuta Enews May 1998, Vol.27, No. 5

ACUTA Newsletters

In This Issue

Board Approves Slate of Nominees

Moderators &Monitors Needed in San Diego!

Board Report

Let there be (Blue) Light!

Contractors on Your Campus?

DC at a Glance

Book Your Room for San Diego NOW!

Positions Available

Welcome New Member

A Simulation Model Analysis Of An Mrp System Under Nervousness In Assembly Shops, Bahig Ali Ali

Archived Theses and Dissertations

No abstract provided.

Acuta Enews April 1998, Vol.27, No. 4

ACUTA Newsletters

In This Issue

Achievement Award Nominations

Cornell to Host Local Event June 8 and 9

Board Report

Using Digital Imagery to Enhance Design Efforts

From ACUTA Headquarters

DC at a Glance

Local Event

Positions Availalbe

Welcome New Members

Study Of Human Factors Variables In Battle Outcome Prediction Models, David Andrew Glovier

Engineering Management & Systems Engineering Theses & Dissertations

Over time there have been many improvements in models that are used to predict the outcome of battles. Currently there is much supposition and speculation surrounding the use of human performance related factors as additional inputs to battle simulation models to improve their accuracy. However there is no conclusive scientific evidence which shows that these factors do make a significant difference. This study investigates the use of factors that may impact on the human performance directly or indirectly in battle prediction models. These factors consist of traditional human factors and external factors that may influence the human performance. The research …

Evaluation Of Airport Operating Efficiencies Using Data Envelopment Analysis, Scott Andrew Cummings

Engineering Management & Systems Engineering Theses & Dissertations

Airport congestion represents a serious obstacle to the future growth of the air transportation industry in the United States. Future development of new airports, and expansion of existing ones is required to meet the growing demands in domestic and commercial air travel. Globalization of economies and international travel has placed additional burdens on airports nationwide. This growth is requiring airports to operate at peak efficiencies. Economic growth of surrounding industries is dependent on the airport that services that geographical region. The variations in functions that airports offer, and therefore the differences in operations, do not lend themselves to traditional efficiency …

Parallel Implementation Of An Artificial Neural Network Integrated Feature And Architecture Selection Algorithm, Craig W. Rizzo

Theses and Dissertations

The selection of salient features and an appropriate hidden layer architecture contributes significantly to the performance of a neural network. A number of metrics and methodologies exist for estimating these parameters. This research builds on recent efforts to integrate feature and architecture selection for the multilayer perceptron. In the first stage of work a current algorithm is developed in a parallel environment, significantly improving its efficiency and utility. In the second stage, improvements to the algorithm are proposed. With regards to feature selection, a common random number (CRN) addition is proposed. Two new methods of architecture selection are examined, to …

The Application Of Statistical Sampling Techniques To The Operational Readiness Inspection, Troy L. Dixon, Timothy S. Madgett

Theses and Dissertations

A Blue Ribbon Commission report to the Air Force Chief of Staff in February 1997 makes several specific recommendations on the conduct of Operational Readiness Inspections. This thesis develops a solution to one of the recommendations of that report; utilize scientifically based sampling techniques to reduce the footprint of the inspection on an evaluated unit. Acceptance sampling, common in industry, is developed for use in the environment of the Operational Readiness Inspection. The time saved from this more efficient sampling practice reduces Inspector General time at an evaluation, decreases the footprint, and answers the specific recommendations of the Blue Ribbon …

Using Simulation To Model Time Utilization Of Army Recruiters, James D. Cordeiro Jr., Mark A. Friend

Theses and Dissertations

It is a well-known fact Army recruiters work very long hours in a demanding environment. In many cases, recruiting stations are geographically isolated from military bases, with recruiters often tolerating a high cost of living, crime, and other such adverse conditions that characterize the communities they work in. The job itself demands self-starting, motivated individuals with a wide range of skills, from street-savvy to salesmanship, in order to succeed. A number of factors in recent years have made military recruiting more difficult, which include scandals involving highly-placed soldiers and changes in attitudes towards military service among eligible men and women. …

Acuta Enews March 1998, Vol.27, No. 3

ACUTA Newsletters

In This Issue

Nominate Now for Board of Directors

Change Reflects Our Growth

Student Paper Competition Deadline

Board Report

"Click Here to Enter a Sweepstakes"

ACUTA Local Event

Spotlight

Maureen Trimm Is New Director-at-Large

Are You Listening?

DC at a Glance

Positions Available

Welcome New Members

Sensitivity Analysis Of The Thunder Combat Simulation Model To Command And Control Inputs Accomplished In A Parallel Environment, David A. Davies

Theses and Dissertations

This research had two objectives. The first was to develop a methodology to demonstrate the parallel processing capability provided by Air Force's Aeronautical System's Command (ASC) Major Shared Resource Center (MSRC) and apply that methodology to the SIMAF Proof of Concept project. Secondly, AFSAA/SAAB requested a sensitivity analysis of THUNDER to the modeled command and control (C2) inputs. The power of parallelization can not be overemphasized. The data collection phase of this thesis was accomplished at the MSRC using a script developed to automate the processing of an experimental design, providing the analyst with a launch and leave capability. On …

An Advanced Visualization Method For An Operations Research Analysis, Steven C. Oimoen

Theses and Dissertations

Visualizing multidimensional data using only two dimensions and conventional visualization techniques limits the understanding of the data set. Underlying structures or patterns within the data can easily go unnoticed. In order to gain additional insight into an analysis, incorporation of visualization and multidimensional graphics into the analysis results should be accomplished. The results must ensure that the information portrayed is not misleading or misunderstood. The integrity of the data must be preserved throughout the transformation. The primary objective of this research effort is to identify techniques to visualize multidimensional data and then develop a software tool to display the multidimensional …

Verification And Validation Of Faarr Model And Data Envelopment Analysis Models For United States Army Recruiting, Gene M. Piskator

Theses and Dissertations

This research has two objectives-to verify and validate the U.S. Army's Forecast and Allocation of Army Recruiting Resources (FAARR) model and to develop a Data Envelopment Analysis (DEA) modeling strategy. First, the FAARR model was verified using a simulation of a known production function and validated using sensitivity analysis and ex-post forecasts. FAARR model forecasts were not accurate and were extremely sensitive to any changes in the model's linear programming constraints and to changes in recruiting resource levels. Second, this research describes a three phase modeling strategy to build accurate DEA models. DEA has become a popular tool to evaluate …

Embedding A Reactive Tabu Search Heuristic In Unmanned Aerial Vehicle Simulations, Joel L. Ryan

Theses and Dissertations

We apply a Reactive Tabu Search (RTS) heuristic within a discrete event simulation to solve routing problems for Unmanned Aerial Vehicles (UAVs). Our formulation represents this problem as a multiple Traveling Salesman Problem with time windows (mTSPTW), with the objective of attaining a specified level of target coverage using a minimum number of vehicles. Incorporating weather and probability of UAV survival at each target as random inputs, the RTS heuristic in the simulation searches for the best solution in each realization of the problem scenario in order to identify those routes that are robust to variations in weather, threat, or …

A Game-Theoretic Improvement Model For Stochastic Networks: Reliability Vs. Throughput, Jeffrey A. Schavland

Theses and Dissertations

Prescriptive models used to allocate resources for network improvement traditionally have used reliability or flow as Measures of Effectiveness (MOEs). Such metrics do not give value to efforts which make a component more difficult to exploit. This study developed an entirely new MOE for stochastic network improvement, flow damage utility, which uses a two person, zero-sum, non-cooperative game to optimize a probabilistic network for an estimate of expected flow minus performance degradation after a worst case component loss. A multiple criteria optimization problem that uses flow damage utility and an analogous, previously developed metric for the reliability problem is used …

The Application Of Sequential Convex Programming To Large-Scale Structural Optimization Problems, Todd A. Sriver

Theses and Dissertations

Structural design problems are often modeled using finite element methods. Such models are often characterized by constraint functions that are not explicitly defined in terms of the design variables. These functions are typically evaluated through numerical finite element analysis (FEA). Optimizing large-scale structural design models requires computationally expensive FEAs to obtain function and gradient values. An optimization approach which uses the SCP sequential convex programming algorithm of Zillober, integrated as the optimizer in the Automated Structural Optimization System (ASTROS), is tested. The traditional approach forms an explicitly defined approximate subproblem at each design iteration that is solved using the method …

Using Bayesian Statistics In Operational Testing, Thuan H. Tran

Theses and Dissertations

This research explored the applicability of Bayesian methods to the problem of determining the reliability of a series system, a parallel system, and a bridge system. The time to failure of each component in each system is assumed to be exponentially distributed. A basic exponential case and a basic binomial case are also evaluated. In general, using simulated data and real data when possible, the Bayesian methods produced confidence intervals that were much tighter than the classical inference methods, thus allowing a decision maker to have higher confidence in making a decision. System level data and aggregated component level data …