Digital Commons Network^™

Assessing The Impact Of Multi-Physics Effects On Photovoltaic Module Degradation Using Computational Modeling, James Yuan Hartley

Mechanical Engineering ETDs

This dissertation describes research to develop and apply multi-physics simulation capabilities using finite element methods to analyze photovoltaic module damage mechanisms. Analyses of full-scale solar modules under mechanical load are presented, including experimental validation against measurements of external deflection and internal strain. Module damage by solar cell breakage and interconnection fatigue are discussed, and the applicability of simplifying analyses using mathematical plate theory is assessed. Detailed sub-module component models undergoing thermal-mechanical stressors are also presented, to identify the design features and materials most influential to stress generation and to assess the representativeness of using sub-module assemblies in accelerated testing. Finally, …

A Cradle To Grave Life Cycle Assessment Of Captured Landfill Methane Abatement Strategies, Joshua Caleb Richard

Theses and Dissertations

Landfill methane mitigation strategies are commonly evaluated using percentage-based leakage assumptions and linear scaling models. These approaches may misrepresent system performance at varying throughput levels and real-world operating scenarios. This thesis develops a system-level life cycle assessment framework that incorporates both fixed infrastructure losses and employs sensitivity analysis to more accurately characterize emissions from landfill gas management pathways. Three scenarios are evaluated: methane capture and flare, methane capture and combustion for electricity generation, and methane upgrading with pipeline injection as renewable natural gas. Results demonstrate that emissions models over- dependance on static factors may inadvertently lead to under-reporting and provide …

Vegetated Canopy Heterogeneity Footprints In The Roughness Sublayer, Giulia Salmaso, Raul Bayoan Cal, Marc Calaf

Mechanical and Materials Engineering Faculty Publications and Presentations

Turbulent flows over horizontally homogeneous rough surfaces are categorized as rough‐wall boundary layer flows, while flows over homogeneous vegetated canopies are better described through a mixing‐layer analogy. At present, numerous studies have investigated canopy density as a transition mechanism between rough‐wall and mixing‐layer‐type flows. Yet, most considered canopies have been spatially homogeneous, with few exceptions investigating agricultural arrangements. However, most vegetated canopies are not homogeneously distributed, but instead contain gaps and spatial heterogeneities of different scales. In these cases, it remains unclear which are the dominant flow traits, and how spatial heterogeneity affects them. To help overcome these knowledge gaps, …

Harmonic Response Analysis Of Asymmetric Double-Wishbone Suspension Systems For Amphibious Vehicle Stability, Harper K. Mccraw

Theses and Dissertations

Amphibious vehicles in the surf zone face severe hydrodynamic forcing, yet their internal suspension dynamics remain under-characterized. This research quantifies the non-linear dynamic response of an asymmetric double-wishbone suspension under regular wave impact. Using a physical model in a wave flume and a Qualisys motion-capture system, global rigid-body roll angles were processed through a decoupled kinematic numerical framework to isolate time-domain strut displacements. To evaluate stability, the data was transformed into the frequency domain to calculate Total Harmonic Distortion (THD). Results indicate that all test configurations exhibited significant non-linearity, primarily driven by mechanical clipping as struts reached their physical travel …

Design And Uncertainty Methodology In High Efficiency Filtration Media Testing, Jeremy Andrei Adriano

Theses and Dissertations

Electrospun nanofiber media are being developed as potential alternatives to conventional HEPA filtration materials due to their small fiber diameters and tunable microstructures. To support future testing of these materials, the Small-Scale Test Stand (SSTS) at the Institute for Clean Energy Technology (ICET) requires modifications to ensure accurate and repeatable aerosol filtration measurements. Electrospun filters introduce challenges including fragile media structures and uncertain filtration efficiencies that may allow particle penetration to downstream instrumentation. This work evaluates adaptations to the SSTS design to support testing of electrospun filtration media. In addition, an uncertainty framework for aerosol measurements obtained using a Scanning …

Criticality Safety Evaluation To Address Potential Over Conservative Restrictions In 49 Cfr Fissile Materials – Exceptions, Avian Blumhorst

UNLV Theses, Dissertations, Professional Papers, and Capstones

The U. S. Department of Transportation’s (DOT) 49 CFR 173.453 Fissile Exceptions provide a regulatory classification that helps eliminate burdensome regulatory requirements. The current fissile exceptions are based on past technical basis reviews. These reviews may be overly conservative, and the final ruling potentially applied significant administrative over-conservatism. This thesis reviewed and presents several recommendations to the fissile exception criteria, as well as 49 CFR 173.453 section’s additions.

Using Monte Carlo N-Particle (MCNP) code version 6.3.0, several infinite sea mixtures and array systems were modeled for fissile isotopes 233U and 235U. The research demonstrated that for fissile exception (a) there …

Liquid-Phase Chemical Melting Deposition For Anchored Nanoparticle–Nanofiber Architectures, Hiep Pham, Kiernan O'Boyle, Gracie Boyer, Jonghyun Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

We report chemical melting deposition (CMD), a manufacturing strategy designed to overcome the low mass loading and weak interfacial bonding inherent to vapor-based synthesis. Unlike conventional vapor routes, CMD leverages a transient liquid-phase transfer (TLPT) mechanism driven by the differential thermal degradation of carrier fibers to transfer and anchor nanoparticles directly onto target fibers. This process thermodynamically drives the wetting and interfacial fusion of nanoparticles, establishing a liquid-phase contact pathway that enables markedly higher active material loading. To validate the structural resilience of this fused architecture against extreme volumetric stress, we utilized lead oxide (PbO) as a model system, which …

Sorption And Thermal Conductivity Of Concrete Containing Aggregates Of E-Waste, Rakesh Kumar Saini, Praveen Kumar

Journal of Sustainable Construction Materials and Technologies

In many parts of the world, substantial energy is used to maintain comfortable temperatures in inner parts of the buildings for living and working. Construction materials with low thermal conductivity, if used in the exterior walls and façade etc. in such structures can be useful in lowering the energy demand. On the other hand, moisture ingress through sorption is a common factor contributing in degradation of concrete structures with time. Constituents of concrete may be engineered to some extent to get both the desired attributes, lower thermal conductivity and sorption than normal concrete. The rapid increase in electronic waste, or …

A Study & Comparison Of Lift Boosters For An Unmanned Aerial Vehicle, Trevor Sean Dady

Theses and Dissertations

Unmanned aerial vehicles are becoming increasingly prevalent in modern society for tasks, such as package delivery, defense, and cinematography. Due to this surge in applications, many researchers have begun to search for improvements to unmanned aerial vehicles for their lift and thrust properties. Potential solutions to magnify an unmanned aerial vehicle’s thrust capability are the implementation of Coanda surfaces, nozzles, or bowl-shaped structures on each propeller. Coanda surfaces provide additional lift force by creating a vacuum in response to the adhesion of fluid to the smooth surface. Nozzles can constrict the flow of air, while also increasing its velocity. The …

Experimental Measurements Of The Forces Acting On A Submerged Beam Using High-Speed Videography, Madelyn Burrell

Masters Theses

The interaction of structures and fluids is highly relevant in many fields but difficult to accurately and reliably characterize. This study demonstrates a novel method of simplifying such problems by analyzing the structural deformations directly, without needing to explicitly solve for the fluid aspect. Six cantilever beams of varying properties were submerged in still water and released from an initial deflection at the free end: the cases consisted of three beam shapes (one of uniform width, one with a narrower free end, and one with a wider free end), with an end mass attached or detached. High-speed videography was utilized …

Thermal Transient Analysis Of Mahogany Wood Biomass Pyrolysis: The Role Of Zeolite Catalyst Variations On Temperature Distribution, Yusri Yusri, Widya Wijayanti, Mega Nur Sasongko

Journal of Mechanical Engineering Science and Technology (JMEST)

Biomass pyrolysis is a thermochemical process that converts waste into fuel. The use of zeolite catalysts can enhance efficiency by accelerating biomass decomposition. To demonstrate its effect, thermal simulations were conducted using ANSYS Thermal Transient to analyze temperature distribution, reaction rates, and catalyst effectiveness in the pyrolysis process. This study aims to improve thermal efficiency and temperature uniformity by analyzing the effect of 10% and 20% zeolite mixtures on heat distribution and heating rates at input temperatures of 650 K, 750 K, and 850 K, using the 2D axial symmetry method. The simulation was performed under specific boundary conditions: input …

Active Brazing Of Single Crystal Al2o3 To Kovar Alloy With Agcuzr Filler Metal, Anthony M. Mcmaster

Mechanical Engineering ETDs

Brazing provides high strength and hermetic joining between metal, ceramic, and composite materials. Origins of the brazing process trace back to 3000BC, yet the technique continues to maintain relevance and demand across aerospace, medical, electronic, optical, and mechanical engineering. Here, single crystal Al2O3 (sapphire) was joined to Kovar in a single step via an AgCuZr active braze filler metal. The microstructure of the completed joint was investigating using microscopy and spectroscopy techniques. A unique braze chamber, paired with an optically clear top substrate (sapphire), allowed further investigation into the dynamics of the active braze process via in situ video monitoring. …

Comprehensive Analysis Of Spray Development And Low Temperature Combustion Characteristics In A Cvcc With Nvh Of Renewable Aerospace Fuels: Hefa & Ft Synthetic Kerosene (S8) Compared To Jet-A & Ulsd, Coleman Norton

Honors College Theses

A comprehensive analysis was conducted to research the viability of Hydroprocessed Esters and Fatty Acids (HEFA) and S8 Synthetic Kerosene fuels as a drop-in replacement for conventional petroleum-based fuels, Jet-A and ULSD (Ultra Low Sulfur Diesel). Global transportation remains heavily dependent on liquid fossil fuels, while renewable aerospace fuels offer a promising pathway to reducing life cycle greenhouse gas emissions and pollution. However, the combustion performance and long-term feasibility of these fuels remain insufficiently characterized. This study performed a thorough assessment of each fuel's thermophysical and combustion properties. Thermophysical characterization encompassed viscosity, freezing point, energy density, spray atomization, and volatility. …

Scalable Advanced Control Of Building Hvac Systems Using Physics-Informed Machine Learning, Xuezheng Wang

Dissertations - ALL

Buildings account for approximately 40% of total energy consumption in the United States, with HVAC systems representing the single largest energy end-use. Advanced control strategies such as model predictive control (MPC), reinforcement learning (RL), and differentiable predictive control (DPC) have demonstrated significant energy savings in individual studies, yet their widespread adoption remains limited by the lack of scalable, control-oriented dynamic models, the absence of consensus on control strategy selection, and the gap between single-zone research and multi-zone real-building deployment. This dissertation addresses these barriers through an integrated research program spanning physics-informed machine learning (PIML) model development, advanced control evaluation, and …

The Design And Manufacturing Process Of The Concealed Shelf, Mary-Del R. Jansen

Honors Theses

The Haley Barbour Center for Manufacturing Excellence (CME) at the University of Mississippi challenges students to manufacture a product and put forth a balanced manufacturing line in a senior capstone project. The chosen product was a concealed shelf, or a shelf with a hidden compartment. The team aimed to design a product, formulate a project plan, analyze the market, conduct financial analysis, develop a prototype, establish a manufacturing process, and demonstrate that process in two production runs. The team used tools such as Computer Aided Design (CAD), market surveys, jig creation, and line balancing to accomplish these tasks. After two …

Development Of A Putting Green Manufacturing Process, Tabitha R. Webster

Honors Theses

Our Capstone project investigates the end to end design, development, and production of a 6‑foot long portable putting green marketed for individuals seeking a high quality, competitively priced golf product for home or office use. The capstone project examines the full lifecycle of product creation applying manufacturing principles learned through the center of manufacturing’s coursework. From the initial concept through engineering design, market research, prototyping, manufacturing optimization, and final production the project emphasizes cross‑functional collaboration across engineering, business, and accountancy majors. Methods used to gather data included marketing surveys, CAD drawings, time studies during production runs, value stream mapping, and …

The Design And Manufacturing Process Of The Concealed Shelf, Clarence A. Matthews Iv

Honors Theses

The Haley Barbour Center for Manufacturing Excellence (CME) at the University of Mississippi challenges students to manufacture a product and put forth a balanced manufacturing line in a senior capstone project. The chosen product was a concealed shelf, or a shelf with a hidden compartment. The team aimed to design a product, formulate a project plan, analyze the market, conduct financial analysis, develop a prototype, establish a manufacturing process, and demonstrate that process in two production runs. The team used tools such as Computer Aided Design (CAD), market surveys, jig creation, and line balancing to accomplish these tasks. After two …

Manufacturing Process Of A Wooden Tortilla Press: Idea To Production, Olivia R. Marque

Honors Theses

The purpose of this thesis is to document the design, development, and manufacturing of a wooden tortilla press completed as a capstone project through the Center for Manufacturing Excellence (CME). Following the technical details of this thesis is a personal reflection by one team member, Olivia Marque. The project follows a structured product development process that begins with problem definition and concept development, progresses through design, prototyping, and jig fabrication, and culminates in a full production run on the CME shop floor. A multidisciplinary team, including engineers, a marketer, and an accountant, collaborates throughout the project to support both technical …

Manufacturing Of A Wooden Tortilla Press: Idea To Production, Glenn H. Walker

Honors Theses

The purpose of this thesis is to document the design, development, and manufacturing of a wooden tortilla press completed as a capstone project through the Center for Manufacturing Excellence (CME). The project follows a structured product development process that began with problem definition and concept development, progressed through design, prototyping, and jig fabrication, and culminated in a full production run on the CME shop floor. A multidisciplinary team, including engineers, a marketer, and an accountant, collaborated throughout the project to support both technical development and manufacturing execution. Project planning and scheduling were established early and maintained throughout the project to …

Design And Development Of A Manufacturing Process For A Raised Planter Box, Weslyn Mcmurrin, Larson Looney, Haneef Adebisi, Rachel Hipskind, Carolyn Hale

Honors Theses

This report presents the design and manufacturing process of a raised garden bed box with an integrated irrigation system. The goal of this project was to replicate a manufacturing environment in the creation of a durable, ergonomic, and cost-effective product. The project began in Spring 2025 with initial market and financial research to determine design requirements and materials for prototype development and continued through the end of the Fall 2025 semester with a small-scale production run and team presentation. Following our market and financial research, multiple design concepts were evaluated and refined through the use of computer-aided design and prototype …

Manufacturing Process Of A Wooden Tortilla Press: Idea To Production, Colleen Nolan, Ben Bird, Olivia Marque, Emma Palmer, Hayden Walker

Honors Theses

The purpose of this thesis is to document the design, development, and manufacturing of a wooden tortilla press completed as a capstone project through the Center for Manufacturing Excellence (CME). The project follows a structured product development process that began with problem definition and concept development, progressed through design, prototyping, and jig fabrication, and culminated in a full production run on the CME shop floor. A multidisciplinary team, including engineers, a marketer, and an accountant, collaborated throughout the project to support both technical development and manufacturing execution. Project planning and scheduling were established early and maintained throughout the project to …

The Design And Manufacturing Process Of The Concealed Shelf, Joshua Harvel

Honors Theses

The Haley Barbour Center for Manufacturing Excellence (CME) at the University of Mississippi challenges students to manufacture a product and put forth a balanced manufacturing line in a senior capstone project. The chosen product was a concealed shelf, or a shelf with a hidden compartment. The team aimed to design a product, formulate a project plan, analyze the market, conduct financial analysis, develop a prototype, establish a manufacturing process, and demonstrate that process in two production runs. The team used tools such as Computer Aided Design (CAD), market surveys, jig creation, and line balancing to accomplish these tasks. After two …

Design Optimization Of Active-Stabilizing Canards For High-Powered Rockets, Simon Babcock

Senior Honors Theses

Rocket canards are a common means of stabilizing a high-powered rocket in flight by producing aerodynamic forces to correct the rocket's trajectory. The size, shape, and position of the canards relative to the rocket body determine their control effectiveness and aerodynamic efficiency – two objectives of canard design with an inverse relationship to each other. By integrating automated iterative rocket trajectory simulation with adaptive surrogate modelling, this research optimized the canard planform geometry for a high-powered rocket to maximize the canards’ control effectiveness and aerodynamic efficiency through multi-variable, multi-objective design optimization. The canard design was first parameterized into four design …

Manufacturing Processes Of A Wooden Tortilla Press: Idea To Production, Emma J. Palmer, Glenn Walker, Colleen Nolan, Olivia Marque, Benjamin Bird

Honors Theses

This thesis follows the Manufacturing Process of a Wooden Tortilla Press from idea to production following lean manufacturing processes and producing a valuable, and profitable product.

Ballistics Characterization Of Micro-Truss Reinforced Lunar-Inspired Geopolymer Concrete For Space Construction, Phoebe G. Johnson

Honors Theses

This research investigates the ballistics response and compressive strength of a Fly Ash/ Lunar Regolith hybrid geopolymer concrete developed for space construction. The study aimed firstly to optimize the Fly Ash/ Regolith mix ratio for maximum mechanical performance and secondly, to evaluate the effectiveness of carbon-fiber micro-truss reinforcement, produced by 3D printing, in mitigating damage from high-velocity impacts. Concrete specimens with varying Fly Ash-to-Regolith ratios (100-50% Fly Ash) were fabricated and tested under compression and ballistic loading. Compressive strength tests followed ASTM C109 using a 110 Kip 810-MTS testing apparatus on both unreinforced and reinforced 2” cubes. For unreinforced samples, …

Development Of A Putting Green Manufacturing Process, Jose Andres Cepeda Santiago

Honors Theses

Our Capstone project investigates the end-to-end design, development, and production of a 6‑foot long portable putting green marketed for individuals seeking a high quality, competitively priced golf product for home or office use. The capstone project examines the full lifecycle of product creation applying manufacturing principles learned through the center of manufacturing’s coursework. From the initial concept through engineering design, market research, prototyping, manufacturing optimization, and final production the project emphasizes cross‑functional collaboration across engineering, business, and accountancy majors. Methods used to gather data included marketing surveys, CAD drawings, time studies during production runs, value stream mapping, and controlled documentation …

Development Of A Putting Green Manufacturing Process, Avalon R. Madden

Honors Theses

Our Capstone project investigates the end to end design, development, and production of a 6‑foot long portable putting green marketed for individuals seeking a high quality, competitively priced golf product for home or office use. The capstone project examines the full lifecycle of product creation applying manufacturing principles learned through the center of manufacturing’s coursework. From the initial concept through engineering design, market research, prototyping, manufacturing optimization, and final production the project emphasizes cross‑functional collaboration across engineering, business, and accountancy majors. Methods used to gather data included marketing surveys, CAD drawings, time studies during production runs, value stream mapping, and …

The Design And Manufacturing Process Of The Concealed Shelf, Emma R. Freeman

Honors Theses

The Haley Barbour Center for Manufacturing Excellence (CME) at the University of Mississippi challenges students to manufacture a product and put forth a balanced manufacturing line in a senior capstone project. The chosen product was a concealed shelf, or a shelf with a hidden compartment. The team aimed to design a product, formulate a project plan, analyze the market, conduct financial analysis, develop a prototype, establish a manufacturing process, and demonstrate that process in two production runs. The team used tools such as Computer Aided Design (CAD), market surveys, jig creation, and line balancing to accomplish these tasks. After two …

The Design And Manufacturing Process Of The Concealed Shelf, Mexrojiddinbek Sattorov

Honors Theses

This document contains information regarding the design and build process of the Concealed Shelf, which is a furniture product with hidden storage capability. First, the team members decided on the design of the product, followed by market analysis and manufacturing feasibility. Lean manufacturing principles were applied to improve the process efficiency and reduce waste.

Multiple prototypes were built with varying raw materials and locking mechanisms. Jigs and fixtures were handcrafted to ensure more consistent product quality. Two production runs were conducted to evaluate performance and identify areas for improvement.

The final design includes economic considerations, manufacturing layout, and continuous improvement …

Thermal Management Of Electric Vehicle Batteries Using Multi-Directional Immersion Cooling Techniques, Lindsey T. Mcgee

Honors Theses

Through the years, liquid cooling has been the most prominent technique used to regulate the temperature in electric vehicle (EV) batteries. This involves a circulating coolant running through a closed-loop system that passes through each of the channels within the lithium-ion battery. While effective, this design has certain limitations. Since the coolant is not making direct contact with the battery cells, its’ capabilities to cool are greatly hindered. Immersion cooling techniques have shown to be an effective cooling method for lithium-ion batteries. This method involved running a dielectric fluid flow across the body of the battery cells. With the immersion …