Digital Commons Network^™

Test 848: John Deere 3020 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 847: Oliver 1900 Series B Diesel 4wd, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 846: Oliver 1800 4wd, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 845: Ford 5000 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Analysis Of The Transient Response Of A Flat Rotating Disk By Generalized Transforms, Kenneth Wayne Chase

Theses and Dissertations

The object of this thesis was to lay a foundation for a comprehensive study of the dynamic response of rotating members. This initial phase of the study includes a theoretical investigation and proposes experimental techniques for the determination of the stresses and strains in a thin, rotating disk with a concentric hole, subjected to transient shaft inputs. There are many practical applications of this problem including computor memory storage disks, turbine rotors, grinding wheels, saw blades, gears, optical reflectors, and solar sails for space vehicles.

Heat Flux Measurement By Miniature Calorimeters, Gary Rex Coffin

Theses and Dissertations

During recent years an increasing number of technical firms and manufacturers have begun to specify heat flux, energy input per unit area per unit time, as a testing and designing criteria. This change in the boundary condition (to heat flux from temperature excess or others) evolved from the idea that each material has a characteristic burning temperature. Therefore, the rate of ablation or burning depends mainly upon the rate of energy input into the specimen, and not its temperature. Thus, the need for a flux measuring device became more acute.

Radiant Flux Distribution From Concave Radiation Sources, Richard K. Duke

Theses and Dissertations

In order to analyse the radiant heat transfer characteristics of a concave source, two vital concepts must be clearly understood. The first is called the apparent emissivity Ea and is a function of both the local total emissivity E and of the geometry of the source. Although the total emissivities of ordinary substances range between zero and one, the two extremeties never occur. Surface emissivities which approach these values in the limit, must be created mechanically from materials in the range 0

Design And Fabrication Of An Apparatus To Determine Heat Transfer Coefficients In An Air-Particle Mixture Over A Horizontal Flat Plate At Uniform Temperature, Louis G. Hunter Jr.

Theses and Dissertations

The study of two phase flow, where a finely divided solid is suspended in a fluid medium, has received considerable attention in the last five years due to the increased number of systems in which this phenomena occurs. The two most important areas involving the gas- particle mechanism are nuclear reactor heat exchangers and liquid and solid rockets.

Study Of Aerodynamic Forces On An Unsymmetrical Body As It Is Oscillated In A Air Stream, David Rees Tree

Theses and Dissertations

The object of this work was to design and build equipment to measure the aerodynamic forces which will cause self-induced oscillations of a body having an unsymmetrical cross-section, such as a D-section. This self-induced oscillation has been called "stall flutter" or in electrical transmission lines, "galloping-transmission lines." It is hoped that this equipment will be used to gain basic Information about these aerodynamic forces.

Test 844: Ford 2000 Super Dexta Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 842: Ford 6000 (Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 843: Ford 6000 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 841: Oliver 1600 (Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 840: Oliver 1600 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 839: Oliver 1800, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

A Study Of The Vibration Characteristics Of A Thin Shell Hyperbolic Paraboloid, Farrin W. West

Theses and Dissertations

Recent progress in structural engineering has been marked by the increased use of thin shells as load carrying members. In particular, shells of revolution have been widely utilized in the missile industry whereas shells of arbitrary shape have been incorporated in the architectural design of today's modern buildings. Missile applications have been extensively studied both statically and dynamically. However, architechural applications have generally been limited to the statics problem with little consideration being given to the dynamic behavior of these unique structures.

Test 838: Allis-Chalmers Series Ii D15 (Lpg), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

A Practical Guide To Building Contour Banks With A Road Grader, J E. Watson

Journal of the Department of Agriculture, Western Australia, Series 4

THOUSANDS of miles of contour banks have been built in Western Australia, and most of this earthmoving has been done by tractor and disc plough* or by road grader.

This article describes the technique recommended for bank construction with the road grader.

Investigation Of Ablation Materials, John Martyn Schattyn

Masters Theses

"The desired result of this paper is to determine what effect the physical and thermal properties of a material have on the ability of that material to act as an ablation heat shield. On the basis of their physical properties, five materials, nickel, beryllium, fused quartz, teflon, and phenolic-nylon, were chosen as examples.

The tools used for this study are heat transfer equations involving a change in material phase. The resulting criteria may be assumed applicable to any material exhibiting one of the four types of ablation processes"--Abstract, page 2.

Analysis Of A Char-Forming Ablator, William J. Reilly

Masters Theses

"The purpose of this thesis is to conduct an analytical analysis of a char-forming ablation material. This is one phase of ablation heat transfer.

Fourier's general equation for one dimensional heat conduction is transformed to moving coordinates and is then solved using the applicable boundary conditions. Solutions of this equation are valid for initial studies in ablation heat transfer"--Abstract, page ii.

Methods For The Determination Of The Thermal Conductivity Of Solids., A. M. Sivadasan

Masters Theses

"The thermal conductivity of materials is of considerable practical and theoretical interest. Numerous publications on this subject have been presented with widely varying approaches and applications being made. Perhaps for no other thermal property are the published results so widely divergent and subject to such great uncertainty, particularly at high temperatures. This is partly due to unsolved difficulties in measurement, but perhaps to an even greater extent to the fact that the thermal conductivity of a material depends on its physical characteristics as well as some environmental factors such as humidity and temperature. In the case of metals or alloys, …

The Design, Construction, And Calibration Of A Hydrodynamic Journal Bearing Testing Machine., John H. Roberts

Masters Theses

"The purpose of this investigation was to design, construct, and calibrate a journal bearing testing apparatus. The design, construction, and operation of the apparatus are described.

Two bronze bearings with length to diameter ratios of 1.0 and 0.5 were tested using a gravity oil reed system. The speed and the location of inlet oil supply were varied, and the resulting coefficients or friction, oil flow rates, outlet oil temperatures, bearing shell temperatures, and eccentricities of the bearings were determined. These results were evaluated and compared with theoretical solutions.

The results compared favorably with the theoretical solutions and substantiated the use …

Convective Heat Transfer In Small Enclosed Air Spaces., Joseph Charles Kroutil

Masters Theses

No abstract provided.

Parameters In Ablation Heat Sheilds, Franklin Chang Liang Lin

Masters Theses

"The desired result of this paper is a method of determining temperature distribution and burn off rate in a semi-infinite rod or shield subjected to a large heat flux. The possible methods of determination were investigated, and it was felt that an analytical approach turned out to be the most feasible.

The analytical analysis employed involves the use of the Fourier's general equation for one dimensional heat flow. Transformations from stationary to moving coordinates reduces the problem from unsteady state to steady state boundary conditions. The resulting equations can be applicable to the extent for the heat flow problems involving …

Thermocouple Shape Influence On Response In A Dynamic Compressible Fluid Atmosphere, Philip J. Steger

Masters Theses

"This investigation was performed to determine whether the geometrical shape of a thermocouple used to measure the temperature of a dynamic fluid atmosphere had any affect on its recovery factor and time response.

A converging nozzle was used to establish a dynamic fluid stream in which shaped silver solder junctions of copper-constantan thermocouples were tested. The velocity of the working fluid, air, was about 1000 ft/sec at the test point.

The investigation was successful, within experimental limits, in determining that the recovery factor of a bare thermocouple junction is not influenced by geometrical shape The results agreed substantially with available …

Test 859: Farmall 806 (Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 861: Farmall 806 (Lpg), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 833: Minneapolis-Moline G706 (Diesel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 834: Minneapolis-Moline G706 (Lpg), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …

Test 836: Minneapolis-Moline G705 (Lpg), Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT GENERAL CONDITIONS East tractor is a production model equipped for common usage. Power consuming accessories can be disconnected only when it is convenient for the operator to do so in practice. Additional weight can be added as ballast if the manufacturer regularly supplies it for sale. The static tire loads and the inflation pressures muse conform to recommendations in the Tire Standards published by the Society of Automotive Engineers. PREPARATION FOR PERFORMANCE RUNS The engine crank case is drained and refilled with a measured amount of new oil conforming to specifications in the operator’s manual. The …