Digital Commons Network^™

Towards Sustainable Marine Education: Assessing High School Students’ Understanding Of Conservation Concepts, Cheng-Chieh Chang, Tsuyoshi Sasaki, Ya-Yin Liao, Ling-Ya Hung, Liang-Ting Tsai

Journal of Marine Science and Technology–Taiwan

This study assesses the concepts of marine resource conservation and sustainability among Taiwanese high school students by developing a Chinese version of the Marine Resources Conservation and Sustainability Scale. Grounded in the cognitive, socio-emotional, and behavioral learning objectives outlined in UNESCO’s Education for Sustainable Development Goals (ESDGs), the scale targets students aged 16 to 18 to examine gender differences in marine knowledge and conservation concepts. The scale comprises 31 items across four dimensions: the first section evaluates marine knowledge, while the remaining dimensions utilize a four-point Likert scale to assess cognitive, socio-emotional, and behavioral learning objectives, respectively. The results indicate …

Dynamic Governance Of Transboundary Fisheries Through Deep Learning And High-Frequency Vessel Tracking Data For Climate-Resilient Management: An Application To The East China Sea, Qin Lin, Yaqing Shu, Manel Grifoll, Hongxiang Feng

Journal of Marine Science and Technology–Taiwan

Transboundary fisheries governance is increasingly challenged by jurisdictional conflicts, regulatory asymmetries, and climate-induced stock shifts in fish stocks, especially in contested regions like the East China Sea (ECS). This study capitalizes on China’s high-frequency BeiDou Navigation Satellite System (BDS) data (June 2021–May 2022) to pioneer a CNN-BiLSTM deep learning model to dynamically identify fishing hotspots and evaluate policy effectiveness. By integrating vessel trajectories, environmental variables, and regulatory events, we examine spatiotemporal patterns of fishing effort relative to seasonal bans, extreme weather, and quota systems. Key findings reveal: (1) post-moratorium (September–December) concentration of fishing intensity, peaking in November; (2) significant weather-driven …

Lock Scheduling Decisions And Strategy Optimization Under Operation Interruption Scenarios, Junhe Li, Qiang Zhang, Junpeng Jiang, Jiangchao Bao

Journal of Marine Science and Technology–Taiwan

Locks are critical nodes in inland waterway transportation systems that concentrate vessel traffic between upstream and downstream reaches, making their operations highly sensitive to hydrological conditions. Therefore, disruptions caused by droughts, floods, or routine maintenance can easily trigger congestion. To address this issue, this study systematically examines the interrelationships among the number of ships awaiting passage, scheduling strategies, the trade-off between lock chamber utilization and ship waiting time, the influence of ship entry sequences on user satisfaction, and the combined effects of these factors on overall lock scheduling performance. Based on these analyses, an integrated decision-making model for two-stage ship …

Corrosion Protection Assessment Of Offshore Wind Turbine Substructures Using Beasy Cp Simulation Analysis, Chuan-Yang Wan, Hung-Hua Sheu, Sheng-Yu Wang, Yao-Ming Wang, Wei-De Chen, Ming-Yuan Lin, Hung-Bin Lee

Journal of Marine Science and Technology–Taiwan

This study investigates the corrosion protection assessment of offshore wind turbine substructures established in the waters off Keelung, Taiwan. First, a cathodic protection system for the monopile foundation is designed and established. The Boundary Element Method (BEM) is applied using the BEASY simulation software to develop a 3D geometric model for cathodic protection. In the steel monopile simulation analysis, the exposed marine environment is set based on the sea conditions of the Keelung small boat marina, including parameters such as salinity, resistance, and polarization curves, to establish an effective cathodic protection system for underwater structures. By simulating these parameters, a …

Face-To-Face Versus Distance Education In Competence-Based Maritime Education And Training, Clara Borén, Marcella Castells-Sanabra, Manel Grifoll

Journal of Marine Science and Technology–Taiwan

The COVID-19 pandemic created significant challenges for higher education, with universities being shut down and face-to-face teaching and assessment shifting to an online format. This presented an opportunity to focus on the continuity of learning through distance education, especially in the maritime context, due to the on-board training requirements, and even though five years have passed, this shift has reshaped the education landscape, proving that remote learning has come to stay.

At the Barcelona School of Nautical Studies, we have developed a weather routing software in the framework of distance education and teaching innovation. We conducted a teaching trial alternatively …

A Bibliometric And Visualization Analysis Of Global Giant Clam Research, Chia-Hsiang Chen, Chih-Hsien Chang

Journal of Marine Science and Technology–Taiwan

In this study, bibliometric analysis and visualization tools were used to investigate the academic network and knowledge structure surrounding global giant clam research. A total of 551 relevant publications from the Web of Science database, published from 1900 to 2024, were analyzed. The findings indicate that research on giant clams has experienced considerable growth since 2012, peaking in publication output in 2021. Sixty-six countries were represented in the study sample, with the United States, Australia, China, Singapore, and Japan being the most represented ones. Notably, the rate of international collaboration was only 29%, highlighting a need for additional integrated cross-border …

The Effect Of Mwcnt-Oil Impregnation Of Sintered Components On Their Wear And Corrosion Resistance, Maha Khaled Abdelfadeel

Theses and Dissertations

Powder Metallurgy (PM) offers an advantageous route for manufacturing complex and near net-shape components. Their inherent interconnected porosity that promotes the action of self lubrication compromises their structural integrity by creating pathways for corrosion and excessive wear. This research investigates the efficacy of Multi-Walled Carbon Nanotubes (MWCNTs) as a nano additive within the impregnating base oil (SN-150 base oil). An experimental matrix was designed to evaluate the influence of MWCNTs with different concentrations of 0.05, 0.1, and 0.2 wt.% and ultrasonic dispersion with varying sonication times of 30 and 60 minutes on the tribological and electrochemical performance of sintered steel …

Adaptive Design Strategies For A Dual-Shaft Pvc Shredder, Gavin Balderas

University Honors Theses

This capstone project involved the design and development of a mid-size plastic shredder, created to process strong, ductile PVC sheets up to ½" thick. This application falls between the capabilities of consumer grade plastic shredders and heavy-duty industrial machines. Over 400 million tons of plastic produced annually and less than 10% of it is recycled; there is an ever-growing need for plastic recycling accessibility and infrastructure. This project aimed to create a compact dual-shaft shredder that can shred thick PVC sheets while being powered by a 120V outlet. Research into blade geometry and orientations aided an iterative design process driven …

Rapid-Prototyping Nanofabrication: Lcd-Based Projection Lithography And Physical Vapor Deposition, Sabeel Saleem Mohammmed

University Honors Theses

The semiconductor industry's continued growth, driven in large part by demand for artificial intelligence hardware, has highlighted the need for greater workforce development in regions adjacent to major fabrication centers like Oregon's Silicon Forest. This capstone project lays the groundwork for a small scale and student led semiconductor fabrication lab at Portland State University by demonstrating two of the core steps in chip manufacturing: photolithography and thin film deposition. Rather than relying on conventional fixed reticles, this work explores a unique, low cost approach to patterning that uses an ultraviolet-compatible liquid crystal display (LCD) as a programmable reticle, allowing arbitrary …

Comparative Analysis Of Leaflet Materials, Stent Materials, And Stent Cell Density For Bileaflet Transcatheter Mitral Valve Design, Joseph Chibuike Nwokeafor, Joshua D. Hofmeister, Breandan B. Yeats, Lakshmi Prasad Dasi, Charanjit S. Rihal, Juan A. Crestanello, Leigh Griffiths, Mohamad A. Alkhouli, Hoda Hatoum

Michigan Tech Publications

Background: The biomechanical performance of bileaflet transcatheter mitral valves (TMVs) depends on complex interactions between leaflet material behavior and stent design. However, the contributions of leaflet materials and constitutive models, stent materials, and stent geometry to valve function and durability remain poorly understood. Methods: A parametric finite element study was conducted using a CAD model of a bileaflet TMV subjected to physiological pressure loading. Five leaflet material models were evaluated: 3 glutaraldehyde-fixed tissues—bovine pericardium (BP; FBP1, FBP2) and porcine pericardium (PP; FPP)—and 2 unfixed tissues—bovine (UBP) and porcine pericardium (UPP). BP was modeled as a linear elastic (FBP1) and Ogden …

Mars Rover Wheels And Drive, Presley S. Sacavitch, Ryan W. Trevena, Dylan A. Mack, Daniel Hudak

Mechanical Engineering

Cal Poly’s Poly1Rover team, advised by Professor Rich Murray, aims to deploy four student-designed mini-Mars rovers, each equipped with a sample-tube retrieval claw, before 2030. However, the wheels of Poly1Rover’s current 6th generation rover are not ready for deployment to Mars, as they do not utilize space-grade materials, are not optimized for manufacturability, and lack sufficient spoke compliance to absorb landing and high-impact loads. This project will be developed by a team of Mechanical Engineering students at California Polytechnic State University, San Luis Obispo (Cal Poly): Daniel Hudak, Dylan Mack, Presley Sacavitch, and Ryan Trevena. Next Intent is providing funding …

Formula Sae Planetary Gearbox Characterization Dynamometer, Trevor Marco Toma, Thomas Welden Pierce, Ethan Liu

Mechanical Engineering

This report outlines a custom hub motor dynamometer requested by the Cal Poly Racing FSAE team. The need for this testing platform is to characterize an existing Formula SAE planetary gearbox for a proposed 4WD powertrain. Hub motors, compact electric machines integrated directly into each outboard wheel, offer significant advantages in efficiency, traction, and chassis packaging compared to conventional RWD drivetrains. By mapping torque capacity, efficiency, lubrication method effectiveness, and fatigue life, the team can validate gearbox design and performance.

This senior project group designed and built a dynamometer according to these specifications which will allow for successful testing to …

Development Of A Video-Based Tool To Measure Motor Asymmetry In Infants At Risk For Hemiparesis, Roha Ali

Master's Theses

Congenital hemiparesis is a unilateral motor impairment stemming from brain injury in utero or early postnatally. Hemiparesis can be difficult to detect in early infancy with current clinical tools. Yet, early identification of motor asymmetry could play a key role in the design of effective early intervention and rehabilitation strategies. This thesis presents the development and validation of a video-based tool designed to extract infant limb movement data using DeepLabCut’s (DLC) machine learning network. The pipeline was developed using videos of typically developing (TD) infants and infants with Asymmetric Perinatal Brain Injury (APBI), all at or under 3 months corrected …

A Comparative Study Of Model Predictive Control And The Stanley Method For Vehicle Path Tracking Applications, Noah S. Fitzgerald

Master's Theses

This thesis compares a model predictive controller (MPC) and a lateral Stanley controller for vehicle path-tracking applications under simulation-based and perception-driven operating conditions. Both controllers were evaluated in simulation using a nonlinear dynamic bicycle model executing single and double lane change maneuvers. Following simulation-based evaluation, both controllers were implemented on hardware within a perception-driven steering-control pipeline. This pipeline utilized recorded sensor data from the MXcarkit 1/8^th-scale autonomous vehicle platform, incorporating lane instance segmentation and homography-based roadway estimation.

Under idealized simulation conditions, the MPC demonstrated improved trajectory-tracking performance during aggressive maneuvers while requiring greater steering activity and computational effort …

Integrating Sustainability Into Engineering Education, Riley R. Moller

Master's Theses

Engineering decisions shape lasting technology that affects environmental integrity, public safety, economic stability, and social equity. As global challenges such as climate change, infrastructure vulnerability, and rapid technological advancement intensify, the responsibilities placed on engineers continue to expand. Sustainability provides a framework for addressing these interconnected pressures through systems-based design and long-term thinking. Yet, sustainability education within engineering programs remains unevenly integrated, often positioned as elective or peripheral rather than as a foundational component of professional preparation.

Prior research shows that sustainability is most frequently addressed through stand-alone courses rather than embedded across required curricula, reflecting disciplinary structures that prioritize …

Improving The Reliability And Performance Of A Supersonic Indraft Tube Wind Tunnel, Christian J. Kaml

Master's Theses

Access to supersonic testing is increasing in demand, and wind tunnels remain one of the safest and most cost-effective methods for gathering high-speed flow data. Despite being more economical than alternative options, supersonic wind tunnel facilities often require substantial investment to construct, operate, and maintain.

The novel indraft tube tunnel architecture was conceived as a high-speed flow testbed that incorporates features of both Ludwieg tubes and indraft wind tunnels to maintain costs low enough to be accessible even to small universities. This design was first developed and tested in 2018 at California Polytechnic State University, featuring a cost per test …

Rehab Mechanics, Sierra Spierling, Nicole Garcia, Joel Gonzalez, Diana Garcia-Becerra, Mia Kwan

Mechanical Engineering Senior Theses

Stroke survivors often struggle to regain grip strength and hand mobility due to limited access to physical therapy, lack of progress tracking during independent rehabilitation sessions, and reduced motivation from slow or unmeasured progress. There is a need for more effective rehabilitation approaches, as current at-home strengthening tools do not provide quantitative feedback or adjustable resistance, and clinical devices are expensive. This makes it challenging for patients and their physical therapists to guide recovery and monitor improvement effectively. To address these obstacles, we developed a low-cost, customizable grip-strengthening device that tracks patient progress and assists in regaining strength and mobility …

Bowl-O-Matic, Nathan Lin, Luis Torres, Jill Worthington, Aiden Foote

Mechanical Engineering

Adaptive physical education presents the unique challenge of accommodating individuals with diverse physical and cognitive abilities. Instructors and program designers must often integrate specialized equipment, fixtures, or features to ensure activities remain safe, inclusive, and user-friendly. Beyond accessibility, adaptive physical education highlights the importance of empowerment— enabling every participant to experience personal growth, confidence, and connection through movement. Friday Club, a local San Luis Obispo program supported by Cal Poly’s Kinesiology Department, embodies these values by providing adaptive physical activities that promote health and well-being for individuals with varying abilities. One of the most popular and regularly held activities is …

Cosmetic Clamper, Daniel Peter Gates, Bruno Roberto Martinez, Samantha Remy, Zachary Joseph Roeber

Mechanical Engineering

Cosmetic Clamper Mechanical Engineering Senior Project was a senior project at California Polytechnic State University, San Luis Obispo in the College of Engineering, Mechanical Engineering Department. The project ran from September 2025 to June 2026. The project developed the Cosmetic Clamper device, an accessibility product designed to help individuals with unilateral upper extremity motor deficits open, use, and close cosmetic containers independently.

Me3329 Modular Phonograph Gearbox, Garrett Andrik Leighton, Preston Robert Hupe, Gavin Carter Ebner, Andrew Renato Reyes

Mechanical Engineering

The Mechanical Engineering Department at California Polytechnic State University, San Luis Obispo (Cal Poly), seeks to develop a laboratory tool allowing students to reinforce concepts of gears for Mechanical Systems Design (ME329). Some current laboratories do not provide students with hands-on interaction, and the department lacks equipment and documentation to support a standardized lab. With ME329 expanding from ten to fifteen weeks, there is an opportunity to create a physical gearbox design lab allowing students to reinforce lecture material in engaging ways, while standardizing student learning. This senior project is presented and sponsored by Professor Alan Zhang. It will be …

Design, Build, Fly 2026, Unique Barnes, Dante Black, Kyle Greiner, Gabriel Kern, Justin Mayer, Charles Olsen, Jack Quinn, Ben Randall, Tate Schurman, Mark Williams, Brendan Yarusso

Mechanical Engineering Senior Theses

This thesis follows the design, manufacturing, and testing of Santa Clara's 2026 AIM Design, Build, Fly Team. The project is built on one main system with multiple subsystems related to the payload and integration of payload. The main system is the Wings of Theseus which is a 5 ft span electric remote controlled plane designed to complete 4 four missions: rapid loading and unloading of payload, airworthiness, internal payload flight, and towed payload flight. Each of these missions is directly related to the aforementioned subsystems. The Wings of Theseus incorporated a rectangular wing with geometric twist as well as a …

Mars Mini Rover Sample Retrieval Robotic Claw, Cami Chambers, Ani Lachikian, Alexa Ramirez, Alex Power

Mechanical Engineering

This project involves several key stakeholders, including the Poly1 Rover Club, Professor Rich Murray, and NASA’s Jet Propulsion Laboratory (JPL). The primary objective is to develop an improved robotic claw capable of retrieving sample tubes left by the Perseverance Rover on the Martian surface. In tackling this challenge, the design must account for the harsh Mars climate while integrating cameras and electrical components, durable structure, and a rotational component to the Mini-Rover claw without incorporating an additional motor, sample storage unit, structural aspects or unnecessary weight. The current Mini-Rover consists of a four-degree-of-freedom robotic arm with joints often referred to …

Sensory, Light, And Sound Box, Galilea Andrea Portillo, Hannah Elizabeth Henderson, Marcus Kiyoshi Kanenaga

Mechanical Engineering

The Sensory, Light, and Sound Box senior project outlined an adaptable, mobile sensory environment designed to improve cognitive and visual processing skills for students with Cerebral Visual Impairment (CVI) at the Oceano Education Center. Currently, the market lacks accessible solutions tailored to these non-verbal, low-mobility students, making traditional classrooms overwhelming. This project outlines the modification of an existing static layout into a functional, three-sided wooden over-bed frame that accommodates a standard hospital bed. Our team manufactured a structurally stable verification prototype under a $500 budget, integrating slow-closing outward-hinged walls for safety, dual Bluetooth speakers, and a synchronized LED projector that …

Cathy’S Catcher, Marlee Scott, Regen Worsley, Alessandra Valenzano, Aviv Ben Zeev

Mechanical Engineering

Deep-sea fishing presents significant challenges for individuals with upper-limb differences, particularly when using prosthetic devices that are not designed for recreational fishing activities. This project developed a custom prosthetic fishing rod attachment for a user who had lost her forearm and desired a safe, comfortable, and independent method of fishing. Through interviews with the sponsor and an iterative design process, a lightweight aluminum attachment was created to interface directly with the user's existing prosthetic quick-connect system.

The design process included concept generation, CAD modeling, rapid prototyping with 3D-printed models, manufacturing, and user-centered refinement. The final design consists of a welded …

Elevate Grill, Tanner Bachmann, Lance Anderson, Caden Huang, Jonathan Li, Brady Alexander

Mechanical Engineering

Santa Maria-style grills are a defining cooking tool of California’s Central Coast and are valued for their open fire cooking method and adjustable grate height. While this design provides direct control over cooking conditions, maintaining a consistent cooking temperature requires frequent manual adjustment of the grate position. This process relies heavily on operator experience and continuous attention, making temperature consistency difficult to maintain in a commercial kitchen environment. The Elevate Grill project was developed for Mike Ahrens and Wren Provisions to address this challenge while preserving the traditional Santa Maria grilling experience. The system uses temperature feedback from multiple thermocouples …

Stakblocks, Micah Satoshi Inoshita, Ava Rose Doerschlag, Cody J. Ellis, Zach M. Lawton, Fernando M. Nalin, Nicholas Humphrey, Aiden Reed Anderson, Sara Maya Suratkal

Mechanical Engineering

Researchers developing sustainable building materials from agricultural waste need a faster way to prototype and evaluate small-scale samples under controlled temperature and pressure before scaling to production. Sponsored by Professor Pete Schwartz of Cal Poly San Luis Obispo, whose work focuses on sustainable technology for developing communities, this project aims to create a prototype testing device for researchers studying agricultural-waste bricks, with the University of Malawi as a potential future testing partner. The final product is intended to inform improved future designs rather than serve as a production-ready device, ultimately supporting the development of affordable, sustainable building materials for communities …

Toro Cover For Bob Packer, Bailey Smolinski, Brandon Petty, Arturo Ramirez, Kathryn Proctor

Mechanical Engineering

Small pools, spas, and hot tubs are common in residential homes, yet small pool owners face persistent tradeoffs between critical features such as weight, ease of use, and appearance in pool covers currently available on the market. Most products optimize a single attribute at the expense of others. For example, solar covers are energy efficient but structurally weak, safety meshes are cost-saving but intensive to install, and retractable covers are automated but expensive. Beyond these tradeoffs, existing solutions often demand multiple people to install, take time and effort, occupy valuable deck space, and sacrifice the surrounding aesthetic. Therefore, small pool …

Foldable Transfer Platform, Toby Sagi, Ashton Heiati, Triton Johnson, Zachary Denis

Mechanical Engineering

The report details the design and results of a Hoyer lift to transfer patients between wheelchairs and our sponsor's, Beacon VTC Santa Maria, vans. The lift disassembles into 3 main pieces, allowing the lift to be stored in the back of the van. The lift uses a hydraulic actuator to rotate the boom. We handed over our project to Beacon VTC Santa Maria for use in their facility!

Package Access Platform, Tyler Connor Moyers, Austin Sien, Brooke Almaraz, Aiden Montano

Mechanical Engineering

This Final Design Review (FDR) presents the completed package access platform project following fabrication, assembly, and verification testing of the final prototype. The project focused on the development of an adjustable and modular access platform capable of adapting to varying workspace requirements while maintaining operator safety and structural stability. The finalized design incorporates adjustable platform dimensions, modular frame expansion, integrated OSHA-compliant handrailing, and adjustable support legs to accommodate uneven surfaces and changing operational needs.

Water Turbine Dynamometer For Low-Power Turbomachinery Testing, Carmen Alaichamy, Yosef Huynh Torres, Michael Duperly, Michael Thomas Duff

Mechanical Engineering

Students in ME 443: Introduction to Turbomachinery compete to design and build efficient small impulse turbines. The course lacks a standardized method to experimentally calculate turbine power output and mechanical efficiency from accurate measurements of torque and speed, for example. To support the learning goals of ME 443, a dedicated water-turbine dynamometer is needed to provide controlled hydraulic power, accurate mechanical and electrical measurements, and clear data for performance evaluation.

Our proposed system delivers a safe, repeatable, and educational testing environment that can be integrated into the Fluids Lab or used as a standalone instructional tool. Key stakeholders include Professor …