Digital Commons Network^™

Cfd Optimization Using Ansys Fluent For Advanced Thermal Energy Conversion, A Case Study On Heat Recovery Systems In Iraqi Power Plants, Basim Mohammed Abid Ali

Al-Esraa University College Journal for Engineering Sciences

The energy sector in Iraq has lots of potential but the infrastructures are old and lack optimum thermal efficiency resulting in high consumption of fuel and environmental degradation. The study focuses on the urgent necessity of modernization of the thermal energy conversion systems in the industrial plants of Iraq by means of the further development of numerical simulation. The paper applies the Computational Fluid Dynamics(CFD) through ANSYS Fluent to model and optimize a shell-and-tube heat exchanger, which is similar to the ones employed in heat recovery units in Iraqi thermal power plants like the Al-Dora power plant in Baghdad. The …

Ai-Enhanced Heat Transfer Optimization In Magnetic Bio-Nanofluids, Hasan Attyah Shaboot

Al-Esraa University College Journal for Engineering Sciences

This study presents a hybrid Artificial Intelligence–Computational Fluid Dynamics (AI-CFD) framework for optimizing heat transfer in magnetic bio-nanofluids subjected to external magnetic fields. Magnetic bio-nanofluids, composed of biocompatible base fluids containing superparamagnetic nanoparticles, exhibit tunable thermal and flow behavior, making them promising for biomedical and micro-cooling applications. Conventional optimization methods based on experiments or brute-force CFD are computationally expensive and limited in exploring the full design space. To overcome these challenges, an Artificial Neural Network (ANN) surrogate model was developed to predict two key performance indicators, the Nusselt number and the friction factor, with high accuracy (R² > 0.997). The …

Adaptive Modulation Techniques To Enhance Ofdm System Performance, Alaa Aqeel Mohammed

Al-Esraa University College Journal for Engineering Sciences

The fourth-generation (4G) mobile communication is supposed to combine a broad coverage of services, including high-speed data, video streaming, multimedia applications and voice transmission, into a single scale. Adaptive OFDM (AOFDM) is among the most popular techniques proposed to meet this objective in which the settings of the transmission are dynamically optimized to the prevailing changing conditions of the channel fading. This paper is concerned with the adaptive modulation in OFDM. We find out the performance of un-coded adaptive modulation on the schemes of QAM and PSK. An effort to use convolutional coding is also integrated into the structure of …

Comparative Adsorptive Performance Of Clinoptilolite, Purolite, And Mesoporous Carbon (Cmk-3) For Heavy Metals And Hydrocarbons Removal From Real Petrochemical Effluent, Eynas Muhamad Majeed, Nuha Muhsen Ali

Al-Esraa University College Journal for Engineering Sciences

Petrochemical activities result in the generation of effluent that contain highly toxic heavy metals and oil products, which are very hazardous to the environment. The research tries to examine the adsorption capacity of three materials synthetic clinoptilolite, synthetic Purolite, and synthesized mesoporous carbon (CMK-3) in the removal of Ni²⁺, Cd²⁺, Pb²⁺, benzene, and toluene present in real refinery effluent obtained at Al-Dora Refinery in Iraq (Baghdad). The experiments were carried by batch adsorption that investigated the equilibrium behavior, kinetic performance, and the influence of ionic strength and organic co-contaminants. The heavy metal adsorption was …

Quality Of Life Indicators In Historic Urban Spaces: A Case Study Of Al-Mustansiriya Madrasa, Baghdad / Iraq, Israa H. Karam Ali, Shireen I. Khazaal

Al-Esraa University College Journal for Engineering Sciences

Historic urban spaces play a central role in shaping social interaction, environmental comfort, and collective identity in cities with deep cultural heritage. Despite this importance, empirical assessments of their performance in terms of Quality of Life (QoL) from the perspective of contemporary users remain limited, particularly in the context of Baghdad. This study examines Quality of Life indicators within a historic urban space through a case study of Al-Mustansiriya Madrasa, one of Baghdad's most prominent historic educational complexes. A descriptive–analytical approach was adopted, integrating a structured questionnaire survey, systematic on-site observation, and spatial analysis based on Space Syntax techniques. The …

Interaction Design In Museum Architecture: A Contemporary Developmental Vision For The Iraqi Museum, Afaf Abdel Sahib Mohammed, Enas Salim Abdulahaad

Al-Esraa University College Journal for Engineering Sciences

The Iraqi Museum's remaining architectural form and traditional display techniques do not allow for enough interaction between visitors and the items, despite the museum's great heritage and cultural value. This between visitors and the exhibits. Additionally, the museum does not include interactive technologies and contemporary architecture, which are now essential components of modern museums around the world.This invites the question of how to optimize the Iraqi Museum's visitor experience by applying the principles of interaction design in museum architecture within a contemporary developmental vision. In order to revive the architectural spaces within the Iraqi Museum, the research aims to generate …

Experimental Analysis Of Diesel Engine Combustion Chamber Performance Using Field Measurements At The State Company For Heavy Engineering Equipment, Mohammed Kanaan Sedeeq

Al-Esraa University College Journal for Engineering Sciences

The current paper provides a detailed experiment and numerical study of the performance of the combustion chamber of a heavy-duty diesel engine in the common Iraqi industrial conditions at the State Company of Heavy Engineering Equipment (HEESCO). The main goal is to close the difference between what is specified by the manufacturers concerning the performance data, which is usually assumed to be under ideal conditions of the ISO standard, and the real efficiency of operation as witnessed in the field. The methodology is based on a hybrid approach that combines direct field measurements of in-cylinder pressure, temperature and fuel flow …

An Ai And Iot Framework For Dynamic Optimization And Sustainability In Smart Cities, Zeinab E. Ahmed, Rashid A. Saeed, Salah Hagahmoodi, Mamoon M. Saeed, Khalid Hamid, Sally D. Abugasim, Eyman F. A. Elsmany

Al-Esraa University College Journal for Engineering Sciences

Smart cities are emerging as a critical solution for creating more efficient, sustainable, and comfortable urban environments. This transformation is primarily driven by the synergistic integration of the Internet of Things (IoT) and Artificial Intelligence (AI). The IoT provides a pervasive network of connected sensors that collect real-time urban data, while AI serves as the analytical engine that processes this information to optimize city-wide systems. This paper presents a comprehensive framework that leverages this AI-IoT convergence for dynamic optimization to achieve long-term urban sustainability. The framework focuses on enabling intelligent, data-driven decision-making across core urban domains. The discussion and analysis …

Optimization Of Bearing Design In Centrifugal Pumps Using Finite Element And Experimental Methods: Application At South Refineries Company, Basra, Mohammed Hasab Naser Al-Mtasher

Al-Esraa University College Journal for Engineering Sciences

In the study, nonlinear vibration and thermo-mechanical characteristics of centrifugal pump bearings utilized in the cooling tower system of South Refineries Company (Basra) were properly examined using a combined experimental and numerical method. The intent of the study was to learn the impact of misalignment, the nature of the lubrication film, and thermal gradients on the stability of the operation of these bearings and their service life under realistic industry environment conditions. Finite element model (FEM) was constructed and tested on the basis of real field data obtained at the working pumps that allowed realistic distribution of stress and temperature. …

Hybrid Solar - Coal Thermal Energy System For Industrial Process Heat At Sayona Drinks Limited In Tanzania, Santos Kihwele, Elisha D. Bitesigirwe

Tanzania Journal of Engineering and Technology (TJET)

Over the past two decades, global efforts to mitigate pollution from conventional energy sources have intensified, with coal remaining a major contributor to carbon emissions. While fossil fuels cannot be eliminated from thermal generation in manufacturing industries, particularly in middle‑income countries such as Tanzania, they continue to dominate as the primary energy source. Industries including food and beverage, paper, textile, paints, chemicals, and pharmaceuticals require substantial thermal energy for heating and drying, and typically rely on coal and natural gas.This study introduces a unique application of a parabolic trough solar thermal system with integrated thermal energy storage, specifically tailored to …

Trajectory-Based Model Predictive Control For Rotary Crane Sway Suppression With Only Horizontal Boom Actuation, Haryson J. Nyobuya

Tanzania Journal of Engineering and Technology (TJET)

Safety is of biggest importance in construction and industrial activities involving rotary cranes. These cranes are huge and responsible of moving large parts or/and materials from different positions. Now operating these cranes tend to be subdue to pay load oscillations when moving the load for which is extremely dangerous when not suppressed. This study proposes the generation of trajectory using Model predictive control approach with reduced control horizon compared to state horizon. Reduced control horizon design reduces computational time for trajectory generation while maintaining the pay-load sways to a minimum. In this approach the complex dynamic model is reduced to …

The Impact Of Gender Sensitization On Requirements Elicitation: A Controlled Experiment, Ruthbertha Kateule, Salome Maro, Leonard Peter Binamungu

Tanzania Journal of Engineering and Technology (TJET)

Previous studies in software engineering have reported the importance of considering gender aspects in various software engineering activities, including requirements engineering, however, to the best of our knowledge, no work has investigated the impact of gender sensitisation on eliciting gender inclusive software requirements. The objective of this study was to understand the impact of gender sensitisation on software requirements elicitation. We conducted a controlled experiment using 40 undergraduate students from three different computing programs at the University of Dar es Salaam. The 40 participants were divided into 9 groups with both males and females. The participants were asked to elicit …

Investigation Of Inlet Turbulence Effects On Mixing Characteristics Of A Jet In Crossflow, Erin Jagger

Masters Theses

Gas flaring is widely used in the oil and gas industry to dispose of excess waste gas, and improving flare efficiency is critical for reducing emissions. Flare performance depends strongly on turbulent mixing between the flare gas and surrounding crossflow. While previous studies have examined the effects of crossflow velocity and low turbulence levels, the combined effects of crossflow turbulence intensity and integral length scale on mixing remains insufficiently understood.

This study uses a non-reacting jet in crossflow (JICF) configuration to represent the mixing process between the flare and crossflow interaction. Using computational fluid dynamics (CFD), Reynolds-Averaged Navier-Stokes (RANS) simulations …

Agentic Ai-Enabled Physics-Informed Machine Learning Framework For Intelligent Building Modeling, Control, And Automation, Zixin Jiang

Dissertations - ALL

Buildings account for a significant share of global energy consumption, and meeting the 2050 net-zero decarbonization targets requires retrofitting approximately 10,000 buildings per day in the United States alone. However, current human-centered workflows for building modeling, simulation, control, and operation remain too slow and labor-intensive to support deployment at this scale. This dissertation proposes an integrated two-pillar framework consisting of a physics-informed machine learning framework for integrated building modeling, control, and simulation, and a multi-agent agentic AI framework for automating building energy engineering workflows built on top of that foundation. The first pillar introduces a Physics-Informed Modularized Neural Network (PI-ModNN) …

Nozzle Erosion Reconstruction Model For Data Analysis In Rocket Engines And Correlation With Chamber Pressure, Ryan J. Thibaudeau, Stephen A. Whitmore

Mechanical and Aerospace Engineering Student Publications and Presentations

Graphite nozzles remain the dominant choice for small hybrid and solid rocket motors operating on laboratory and university budgets, owing to their low cost, ease of machining, and rapid turnaround during iterative design campaigns. These same programs, however, must contend with the fact that graphite erodes through coupled thermochemical and mechanical mechanisms when exposed to the oxidizing species generated by high-energy propellant combustion, and the resulting throat-area growth fundamentally alters the time histories of chamber pressure, thrust, and delivered specific impulse. This paper presents a nozzle-erosion reconstruction model that extracts the time-resolved throat area from coupled thrust and chamber-pressure measurements …

Enhancing The Barrier And Mechanical Properties Of Kraft Paper For Food Packaging Using Poly (Lactic Acid) Coatings Via Dip-Coating Technique, Putu Hadi Setyarini

Makara Journal of Science

Moisture-resistant kraft paper is important for food packaging because it helps preserve product quality and extend shelf life. However, untreated kraft paper exhibits limited barrier performance owing to the porous and hydrophilic nature of its cellulose structure. Herein, the mechanical and barrier properties of kraft paper were enhanced by applying poly (lactic acid) (PLA) coatings using a dip-coating technique with PLA concentrations ranging from 1 to 5 g/100 mL and either single- or double-dip-coating cycles. The results showed that increasing the PLA concentration and applying a double dip-coating treatment consistently improved coating thickness, tensile strength, elongation at break, water resistance, …

Effect Of Heat Treatments On The Corrosion Resistance Of A Trip Steel And Its Evaluation By Non-Destructive Testing, Karla Ivette Vega-Nava, Ariosto Medina-Flores, Marco Antonio Espinosa-Medina, José Sergio Pacheco-Cedeño, Héctor Guillermo Carreón-Garcidueñas, Francisco Fernando Curiel-López, Jose Jaime Taha-Tijerina

Mechanical Engineering Faculty Publications

The development of advanced high-strength steels (AHSS) for the automotive industry requires optimizing the balance between mechanical properties and durability in aggressive environments. This study investigates the effects of two heat treatment routes on the microstructure and corrosion resistance of a transformation-induced plasticity (TRIP) steel (Fe-0.2C-1.75Mn-0.5Si-1Al). Route A includes a full austenitizing step at 1000 °C prior to intercritical annealing, whereas Route B omits this step and begins directly with intercritical annealing at 800 °C. Microstructural characterization (SEM/XRD), electrochemical assays, and eddy current tests were employed. The results revealed that Route A yields a homogeneous microstructure with 12.7% retained austenite, …

Mae Enewsbrief January-March 2026, Department Of Mechanical And Aerospace Engineering, Michigan Technological University

Department of Mechanical and Aerospace Engineering eNewsBrief

No abstract provided.

Ion Irradiation Of Microelectromechanical Resonators, Hengky Chandrahalim, David D. Lynes

AFIT Patents

A method of enhancing an electromechanical coupling coefficient of a microelectromechanical (“MEMS”) device. The method includes applying, to a fully fabricated MEMS device, heavy particle ion radiation to the MEMS device at a fluence of at least 1×10¹⁴ cm.⁻². According to other embodiments of the present invention are directed to a bandpass filter comprising a plurality of MEMS devices fabricated in accordance with the methods provided. The MEMS of the plurality are electronically or mechanically coupled.

Structure–Optical Property Relationships In Amm′Q3 Chalcogenides, Ayat Tassanov, Huiju Lee, Daniel W. Spainhour, Yi Xia, James M. Hodges

Mechanical and Materials Engineering Faculty Publications and Presentations

Ten ACuHfQ₃ (A = Na, K, Rb, Cs; Q = S, Se, Te) chalcogenides were prepared via high-temperature solid-state methods and structurally characterized using single-crystal X-ray diffraction. The type-I AMM′Q₃ structures are defined by the arrangement of HfQ₆ octahedra (O) and CuQ₄ tetrahedra (T) in their layers, which adopt either OTOT (Cmcm, Pnma) or OOTT (Pnma, P2₁/m) connectivity. UV–vis absorption and photoluminescence spectra indicate optical band gaps ranging from 1.2 to 1.7 eV and reveal that OTOT and OOTT variants have direct and indirect band gaps, …

Improved Method Of Evaluating Gas-Phase Air Cleaners Considering Adsorption And Desorption Mechanisms To And From Internal Test Chamber Surfaces, Casey Douglas Coffland

Dissertations and Theses

Portable air cleaners are playing an increasingly important role in managing indoor air quality in response to pressing issues like wildfire smoke events. Smoke is a complex mixture of gases and particulate matter; while established test methods exist for particulate matter, the dynamic behavior of gaseous pollutants is not well accounted for in current test methods. This is because prevailing air cleaner testing methods typically treat background losses as irreversible, whereas gases can engage in partitioning to and from test chamber surfaces. Ignoring these sorption interactions causes inaccurate estimation of an air cleaner's impact.

A new approach has been developed …

Topographical Mobility Envelope Modeling And Geometric Analysis For Off-Road Unmanned Ground Vehicles, Huashuai Fan

ETDs from 2020-2029

This dissertation introduces topographical mobility as a quantitative framework for assessing off-road unmanned ground vehicle performance based on geometric interaction between the vehicle and terrain. Rather than relying on conventional discrete indices, the proposed formulation evaluates mobility directly from vehicle and terrain geometry, expressing vehicle capability in terms of radius constraints implied by its dimensions and suspension state. On the vehicle side, longitudinal and lateral mobility radii are derived analytically from vehicle geometry—wheelbase, track width, ground clearance, and lowest underbody point location—quantifying the minimum terrain radius negotiable without underbody interference. Suspension state is shown to alter longitudinal mobility radius by …

Optimizing Graphene Oxide In Self-Compacting Concrete: A Sustainable Nano-Material Strategy For Enhanced Durability And Structural Performance, Mohammed Shakeebulla Khan, Vijaya G. S

Journal of Sustainable Construction Materials and Technologies

In order to reduce the environmental impact of the constructed world, advanced and sustainable construction materials are needed. This work is a summary of the comprehensive study on a novel self-compacting concrete with nano-engineered material (graphene oxide) modified self-compacting concrete (GO-SCC). The optimum dosage of GO was determined using Taguchi method, Analysis of Variance (ANOVA) and Response Surface Methodology (RSM) multi-objective statistical optimization method, and was found to be 0.10% by weight of cement (bwoc). This dosage of 0.10% GO led to the overall desirability score of 0.87, which confirmed that this was the optimum dosage for six response variables …

Beneficial Investigation Of Sustainable Recycled Waste Plastic In Treating The Consolidation Behavior Of Fine Soil, Aram Mohammed Raheem, Cumaraswamy Vipulanandan, Mohammed Hiwa Abdullrahman, Ali Tariq Omer

Journal of Sustainable Construction Materials and Technologies

Recycled waste plastic is one of the regular garbage utilized as a sustainable material in soil remediation. This study examines the efficacy of utilizing local recycled waste plastic as an ecological quantifiable along with soil containing fine particles to analyze the consolidation behavior. Various recycled waste plastic contents ranging from 2% to 10% were employed experimentally in two patterns where in the first pattern the recycled waste plastic were mixed as dry material with the fine soil particles while in the second pattern a sandwich layer of 10% of the recycled waste plastic was placed in the middle of the …

Enhanced Thermal Energy Storage In Buildings: Impregnation, Leakage, And Environmental Performance Of Organic And Inorganic Pcm Composites, Gökhan Genç, Esra Yılmaz, M. Yusuf Yazıcı

Journal of Sustainable Construction Materials and Technologies

This study experimentally investigates the impregnation and leakage performance of various organic (tobacco, sawdust, bay leaf, black cumin) and inorganic (vermiculite, perlite, bentonite, sepiolite) carrier materials used for phase change material (PCM) integration in building applications. The commercial paraffin-based PCM RT-31 was used as the thermal storage medium. Impregnation and leakage tests were conducted to evaluate the PCM absorption capacity, form stability, and energy storage potential of each carrier. The results revealed that perlite (C = 80%) and bay leaf (C = 78%) exhibited the highest impregnation capacities due to their porous and fibrous structures; however, they also demonstrated significant …

Modeling Of Tensile Stress-Strain Response For Steel Fiber Reinforced Self-Compacting Concretes, Anıl Niş, Nilufer Özyurt, Turan Özturan

Journal of Sustainable Construction Materials and Technologies

Main aim of the research was to further understand self-compacting concrete reinforced with steel fibers (SFR-SCC) behavior and to contribute modeling of the tensile stress-strain diagrams for the standardization of the fiber reinforced materials for structural utilization. Fiber reinforced materials has not been used without structural rebar because of the absence of stress-strain curve in tension required for the structural design codes. Hence, an inverse analysis (multi-layer model) was further modified for various steel fibers to predict tensile stress-strain behaviour. For this purpose, 5 different mixes; control, reinforced with long fibers with 0.5% and 1%, short fiber with 0.5% and …

Load Profile Analysis And Forecasting For Rural Mini Grids In Uganda, Prossy Mutesi, Santos L. Kihwele, Emmanuel S. Matee

Tanzania Journal of Science

Accurate load forecasting is essential for the reliable and cost-effective operation of rural mini grids, where constrained generation capacity and high penetration of renewable energy resources require well-informed operational decisions. This study examines electricity demand characteristics and forecasting performance for the Buzaami and Ssenyondo mini grids in Uganda, with particular focus on diurnal load profiles, peak demand behavior, and seasonal variability. 2022 operational data show extended peak demand from early morning to late evening, driven by socio-economic activities that strain resource scheduling and reliability management. To address these challenges, the study evaluates and compares Long Short-Term Memory (LSTM) networks, fuzzy …

Optimization Of Bio-Briquettes Production From Cassava Stems Co-Blended With Sisal Bole Bagasse Using Response Surface Methodology, Agnes Nshoma Msobi, Neema O. Msuya, Kando Khalifa Janga

Tanzania Journal of Science

This research aimed at producing bio-briquettes from cassava stems and sisal bole bagasse as an alternative source of cooking energy. A Response Surface Methodology (RSM) with Face - Centered Central Composite Design (FCCCD) featured a multi-objective optimization of the effect of the production parameters, focusing on maximizing char yield and Higher Heating Value (HHV) of the produced briquette while minimizing carbonization temperature and residence time. The findings showed that bio-briquettes produced at the lowest temperature (250 ℃) and residence time (30 min) and the blending ratio of 75% by 25% had the highest char yield of 76.92% and HHV of …

Ontology-Based Decision Support System For Improving Aquaculture Management, Thuy Thi Thu Pham, Phuong Thi Can, Nga Thi Thanh Ha

Journal of Marine Science and Technology–Taiwan

Early detection of shrimp diseases is vital for reducing losses and ensuring sustainable aquaculture. In this study, a novel ontology-driven framework for shrimp disease diagnosis that integrates environmental knowledge with machine learning-based image analysis is proposed. An ontology was constructed from a structured dataset of environmental parameters and farm conditions related to shrimp diseases, which formally represents concepts such as farm characteristics, environmental factors, symptoms, and disease types. Two public shrimp image datasets were subsequently used to train convolutional neural networks (ResNet50 and MobileNetV2) for automated disease classification. The predicted disease labels and confidence scores were mapped onto the ontology. …

Case Study On Operational Performance Improvement By Turbocharger Nozzle-Ring Modification In Shipboard Generators, Jong-Hun Im, Mukyeong Kang, Sang-Deuk Lee

Journal of Marine Science and Technology–Taiwan

Owing to increasingly stringent emission regulations imposed by the International Maritime Organization and rising fuel prices, the demand for enhanced energy efficiency and emission control in marine power systems is increasing. This study presents a case study in which the performance of an aging auxiliary generator is restored by modifying the turbocharger nozzle ring. The vessel, a 12-year-old crude-oil tanker, experienced repeated operational issues with its No. 3 generator. This included elevated exhaust gas temperatures, reduced intake air pressure, and frequent turbocharger surges. To address these challenges, the nozzle-ring blade angle was reduced by approximately 2° using spare components, while …