Digital Commons Network^™

Stiffening Of Soft Silicone Upon Deep Uv Treatment As Characterized Using Nanoindentation, Amanda Wilder, Zaria Booth, Caden Obermeyer, Saika Sharmin, Venkat Maruthamuthu

Mechanical & Aerospace Engineering Faculty Publications

Silicones are elastomers that have a wide variety of uses, including biomedical applications such as the coating of biomedical devices and as implants. Soft silicones with mechanical properties similar to those of biological tissues have particularly gained use as substrates for cell culture in mechanobiology studies. In this context, it would be desirable to be able to alter their surface mechanical properties with a relatively simple physical treatment. While deep ultraviolet (deep UV) or ultraviolet C (UV-C) treatment has been previously used as a surface treatment method for stiffer silicones formulations, the effect of this treatment on soft silicones relevant …

Development Of Thermal Joints For Conduction-Cooling Applications, J. Lewis, G. Ciovati

Mechanical & Aerospace Engineering Faculty Publications

In support of the development of conduction-cooled superconducting radiofrequency (SRF) niobium cavities for use in continuous-wave linear accelerators, an experimental study of thermal contact resistance was performed on bolted joints using high-purity niobium, aluminium, and copper along with Apiezon N grease and indium foil as interfacial materials. The geometry of each joint investigated aims at replicating the design adopted in conduction-cooled SRF cavities currently under development at Jefferson Lab. The materials' thermal conductivity and the joints' thermal resistance were measured in the temperature range of 3.5 - 10 K. The results showed that the low thermal contact resistance of 2-4 …

Performance Comparison Of A Low Mass Vibratory Lunar Surface Compactor In Vacuum Versus Atmosphere, Robin D. Austerberry

Dissertations, Master's Theses and Master's Reports

As space agencies prepare to return to the moon, an emphasis is being placed on establishing a sustained human presence that requires permanent structures and supporting infrastructure, making site preparation a critical factor. Michigan Technological University’s Planetary Surface Technology Development Lab has developed a novel low-mass surface compaction tool for use on a site preparation vehicle in collaboration with Colorado School of Mines. Testing in vacuum is necessary to simulate a relevant environment, which is required to increase the technology readiness level of this tool to TRL 5. Testing concluded significant interactions between the presence of atmosphere and other factors. …

Minimizing Snow Loss On Fixed Tilt Solar Pv Installations Through Frame Material Selection And Installation Layout, David B. Wallis

Dissertations, Master's Theses and Master's Reports

This thesis investigates the effects of frame material selection, module orientation and module gaps on photovoltaic energy production in a snowy environment. These factors are easily implemented in new PV installations at minimal or no extra cost. These experiments are installed as fixed tilt arrays at 35° with DC current, DC voltage, and meteorological monitoring. The frame material and module gap experiments both produced actionable results. In the frame material experiment, consistent event level energy production gains resulted in seasonal production gains favoring aluminum framed modules. In the module gap experiment energy gains are independent of atmospheric conditions. The orientation …

Experimental Rate Feedback Control Of A Model-Scale Hourglass-Shaped Heaving Point Absorber, James R. Halverson

Dissertations, Master's Theses and Master's Reports

Buoy geometry greatly affects a point absorber wave energy converter's dynamic response to waves. Finding the optimal buoy shape and control method remains an open research area focused on maximizing the conversion of wave kinetic energy into electricity. This work presents an experimental comparison of closed-loop energy extraction between a cylindrical and a truncated cone buoy, both with the same submerged volume, across various wave frequencies and amplitudes. To ensure a fair comparison, the optimal rate feedback gain is calculated for each buoy at each wave condition. Multiple metrics, including power output, capture width, and actuator force, are used to …

Nondestructive Evaluation Of Additively Manufactured Parts Using Resonant Inspection And Frequency Domain-Based Correlation Criteria, Gita Deonarain

Dissertations, Master's Theses and Master's Reports

Additive manufacturing (AM) enables the production of highly customized and geometrically complex components; however, these parts remain susceptible to a wide range of defect types and severities. The combination of complex geometries and distributed defects presents a significant challenge for post-process nondestructive evaluation (NDE). Conventional inspection techniques, such as computed tomography and ultrasonic testing, are often limited by geometry, material, accessibility, and cost, while in situ monitoring is not yet sufficiently mature to replace post-process inspection.

This dissertation establishes the Frequency Domain Assurance Criterion (FDAC) as a quantitative, vibration-based framework for defect detection in AM components. FDAC captures spatial–spectral correlations …

Development And Calibration Of A 2-D Diesel Oxidation Catalyst Filter (Docf) Model With Spatially Varying Washcoats Using Spacims And Engine Loading Data, Thomas K. Price

Dissertations, Master's Theses and Master's Reports

Diesel engine exhaust contains regulated species, including carbon monoxide, hydrocarbons, nitrogen oxides, and particulate matter (PM). Meeting increasingly stringent emission standards typically requires multiple aftertreatment components, motivating the development of multifunctional devices that reduce system size, cost, and catalyst usage. Computational models are essential for guiding this design process; however, existing models primarily focus on single-function devices and rarely capture the behavior of multifunctional systems with multiple catalyst washcoats. This work presents a physics-based model of a wall-flow diesel oxidation catalyst filter (DOCF), a multifunctional device that integrates the roles of a diesel oxidation catalyst and a diesel particulate filter …

Machine Learning And Multi-Scale Optimization For Control And Energy Management In Connected And Automated Vehicle Propulsion Systems, Joshua D. Orlando

Dissertations, Master's Theses and Master's Reports

This dissertation presents a multi-scale optimization framework leveraging machine learning (ML) to enhance energy efficiency in connected and automated vehicle (CAV) propulsion systems. As transportation transitions toward hybridization and automation, the integration of vehicle-to-everything (V2X) connectivity and advanced control algorithms offers unprecedented opportunities for energy reduction. This research addresses three critical scales of vehicle energy management: multiple vehicle-level coordination, component-level powertrain dynamics, and real-time vehicle parameter estimation.

First, the research investigates the energy consumption characteristics of heterogeneous propulsion systems—ranging from internal combustion engines to battery electric vehicles across light- and heavy-duty sectors—on arterial roadways. Utilizing Particle Swarm Optimization (PSO) and …

Design And Experimental Evaluation Of A Custom Vision-Guided Approach To 2d Part Localization For Industrial Robots, Faisal Ali

Dissertations, Master's Theses and Master's Reports

Vision-guided robots offer a clear advantage over teach-pendant programming for battery handling, where modern packs hold thousands of cells and teaching each position by hand does not scale. Commercial vision systems address this need, but their calibration, detection, and coordinate-conversion stages are closed to the user, making it hard to incorporate newer learning-based methods. This work presents a modular, custom-built vision-guided system using an Orbbec Gemini 435Le eye-in-hand camera, an NVIDIA Jetson Orin Nano, an Allen-Bradley Micro850 PLC, and a FANUC LR Mate 200iC, communicating over Modbus TCP and EtherNet/IP. A per-hole classification model resolves each known hole into a …

Study Of Bearing Capacity Testing And Soil Preparation Techniques In Lunar Highlands Simulant At Field Scale, Christi A. Lecaptain

Dissertations, Master's Theses and Master's Reports

Humanity seeks to return to the surface of the Moon with the advent of the Artemis missions. These endeavors plan to be the beginning of a new era as NASA and other space organizations seek to establish a lunar base. Ahead of any astronauts or mining infrastructure, the physical groundwork will need to be laid to support the arrival of rockets, boots, and rover wheels. As surfaces are prepared, they will need to be tested and verified to ensure the stability of any structures placed on top. Understanding the bearing capacity is vital to soil quality testing. A standard terrestrial …

Modeling And Testing Chain Trencher Excavator And Cone Penetrometer Robotic Prospecting Systems For Lunar In-Situ Resource Utilization, Marcello C. Guadagno

Dissertations, Master's Theses and Master's Reports

The Artemis Missions aim to establish a sustained human presence on the Moon, requiring In-Situ Resource Utilization (ISRU) of water-ice deposits in permanently shadowed regions. Two critical capabilities must be developed to enable ISRU at scale: prospecting instruments that can characterize the spatial distribution and geotechnical properties of icy regolith in situ, and excavation systems that can extract hardened icy regolith efficiently. This dissertation addresses both needs through the development and testing of a Percussive Heated Cone Penetrometer (PHCP) for geotechnical prospecting and a chain trencher excavator for icy regolith mining.

The PHCP was developed across eight design iterations and …

Analytical And Data-Driven Modeling And Control Of Nonlinear Point Absorber Wave Energy Converters With Application To Cone–Cone Buoy Geometries, Houssein Yassin

Dissertations, Master's Theses and Master's Reports

This dissertation develops analytical modeling, numerical simulation, experimental validation, and data driven control methods for nonlinear point absorber wave energy converters, with particular emphasis on cone--cone buoy geometries. Geometry dependent nonlinear force models are first derived using pressure field and displaced volume formulations. These models show how buoy geometry produces nonlinear Froude--Krylov and restoring forces, including the dominant cubic behavior of cone--cone geometries.

The derived models are incorporated into a feedback linearization framework that compensates selected nonlinear dynamics while retaining the incident wave terms. An analytical optimal control formulation is also developed to maximize harvested energy in nonlinear, nonautonomous systems …

Entropic Forces Near Fluctuating Surfaces, Rubayet Hassan

Dissertations

Nanoscale structures are inherently dynamic due to persistent thermal fluctuations. Even in solid materials, these random deformations, driven by ambient thermal energy, can become significant when their characteristic scale approaches that of the structure itself and strongly influence their overall mechanical behavior. Examples of such structures include crystalline membranes, appearing in diverse forms such as nanotubes, nanoribbons, and kirigami/origami structures. Similarly, biological nanostructures, including lipid membranes, microtubules, actin filaments, and DNA, exhibit extreme flexibility and responsiveness due to their low bending rigidity. Numerous physiological processes are intrinsically linked to these thermal fluctuations, including exocytosis and endocytosis, membrane fusion, pore formation, …

Material Degradation And Analysis Of N-Doped Graphene/Mof Nanocatalysts For Orr In Electrochemical Energy Systems, Niladri Talukder

Dissertations

The development of advanced electrochemical energy conversion and storage systems is crucial for achieving sustainable energy security. As alternatives to precious metal-based catalysts in electrochemical systems, especially for the oxygen reduction reaction (ORR), Nitrogen-doped Graphene with Metal-organic Frameworks (N-G/MOF) nanocatalysts have shown exceptional promise in recent years. This research advances the understanding of N-G/MOF nanocatalysts by systematically examining their structural features, degradation traits, correlated performance losses, and other aspects related to catalytic activities.

First, nitrogen-doped graphene (N-G) nanocatalysts were thoroughly investigated, resolving their physical properties, the influence of synthesis parameters, molecular-level material structures, and chemical and electronic structural details of …

Effect Of Local Steel Slag Incorporation On The Mechanical Properties Of Concrete, Ahmed Safaa Tariq Karmah, Wissam Khadum Alsaraj, Luma A. Zghair

Al-Esraa University College Journal for Engineering Sciences

The increasing interest in the production of concrete through the utilization of inexpensive materials has caused a rise in the number of studies concerning the use of materials with cementitious properties, such as Silica Fume, Slag, Fly Ash and other pozzolanic materials. Moreover, the increasing amounts of Steel Slag being produced from local factories that are being deposited without an available method of disposal provides an opportunity to harness the Slag in the production of an inexpensive, and possibly better concrete. Slag has been used as both an addition and substitution of the cement and fine aggregate. The mixtures included …

Decoding Climate Change: A Comprehensive Statistical Insight Into Temperature Anomalies In Iraq And Its Neighboring Countries, Jameel T. Al-Naffakha, Mohammed R. Al-Qassabanda, Israa Jafar

Al-Esraa University College Journal for Engineering Sciences

This study applies advanced statistical techniques, including the Mann-Kendall Trend Test and ARIMA forecasting, to validate and predict temperature anomalies across Iraq and its neighboring countries (2014–2024). Findings confirm a statistically significant warming trend (p < 0.00000005) across all nations, with Syria (1.02°C) and Turkey (0.97°C) experiencing the highest anomalies. GIS-based spatial analysis highlights regional disparities, identifying climate-vulnerable zones. The persistent rise in temperature anomalies correlates with worsening water scarcity, desertification, and extreme weather events, including prolonged droughts and heatwaves. Iraq’s peak anomaly (1.48°C) has exacerbated heat stress, agricultural decline, and reduced river inflows, while Kuwait and Saudi Arabia struggle to maintain critical infrastructure under record-breaking temperatures exceeding 50°C. These climate shifts pose severe risks to water availability, food security, and energy demand, necessitating urgent policy interventions. Key recommendations include enhanced water resource management, climate-adaptive agriculture, and renewable energy expansion. If left unaddressed, rising temperatures could destabilize the region, increasing socio-economic vulnerabilities and escalating resource conflicts. This study underscores the need for cross-border collaboration and sustainable adaptation policies to mitigate the long-term impacts of climate change in the Middle East.

Optimal Power Flow Control In The Iraqi Power Grid Using Artificial Intelligence Algorithms For Carbon Emission Reduction, Mohammed Shakir Juber

Al-Esraa University College Journal for Engineering Sciences

Iraq’s power sector remains in a protracted and severe crisis characterized by a significant mismatch between supply and demand, high levels of losses during transmission and distribution, as well as an increasing challenge to the resources base being largely unfavourably. These inefficiencies impose heavy costs on the national economy in excess of 40 billion annually and they also reinforce greenhouse gas emissions, and exacerbate environmental issues. To deal with these problems, we proposed in this paper that a new hybrid AI tool should be developed for the solution of multi-objective optimization problem based on purpose Genetic Algorithm (GA) merger with …

Applying Machine Learning Techniques For Early Detection Of Cyber Attacks On Iot Devices, Noor Adnan Allamy

Al-Esraa University College Journal for Engineering Sciences

This research designs, implements, and evaluates a machine learning-based framework for the early detection of cyber attacks targeting Internet of Things (IoT) devices, with a specific focus on the context and challenges present in Iraq. The study conducts a comparative analysis of three supervised learning algorithms—Support Vector Machine (SVM), Random Forest (RF), and Deep Neural Networks (DNN)—using a combination of benchmark datasets (NSL-KDD, CIC-IDS-2017, Bot-IoT) and a synthesized dataset adapted to simulate the Iraqi threat landscape. Key performance metrics, including accuracy, precision, recall, and F1-score, were used for evaluation. The proposed Random Forest model demonstrated superior performance, achieving an accuracy …

Ai-Enhanced Heat Transfer Optimization In Magnetic Bio-Nanofluids, Hasan Attyah Shaboot

Al-Esraa University College Journal for Engineering Sciences

This study presents a hybrid Artificial Intelligence–Computational Fluid Dynamics (AI-CFD) framework for optimizing heat transfer in magnetic bio-nanofluids subjected to external magnetic fields. Magnetic bio-nanofluids, composed of biocompatible base fluids containing superparamagnetic nanoparticles, exhibit tunable thermal and flow behavior, making them promising for biomedical and micro-cooling applications. Conventional optimization methods based on experiments or brute-force CFD are computationally expensive and limited in exploring the full design space. To overcome these challenges, an Artificial Neural Network (ANN) surrogate model was developed to predict two key performance indicators, the Nusselt number and the friction factor, with high accuracy (R² > 0.997). The surrogate …

Hybrid Experimental–Computational Study On The Energy Absorption Of Graphene Nanoplatelet-Reinforced Sandwich Structures, Hamdan Yousif Hamdan

Al-Esraa University College Journal for Engineering Sciences

Background: Sandwich composites are widely used in aerospace, automotive, and marine applications because of their lightweight, stiffness, and strength, but they remain prone to out-of-plane impacts and barely visible impact damage (BVID). Graphene Nanoplatelets (GNPs) have shown strong potential to improve fracture toughness and impact resistance. However, hybrid experimental–computational studies applying such reinforcement are still lacking in developing contexts like Iraq, where practical and accessible solutions are essential. Aims: The study investigates the effect of GNP reinforcement on the low-velocity impact behavior and energy absorption of glass fiber/epoxy sandwich panels with PVC foam and balsa wood cores. Objectives include fabricating …

Effect Of Thick Closed Walls Of West And South Elevations Of Iraqi Middle And South Territory Housing Building On Reducing Energy Use, Abeer Qasim Jbur, Shaimaa M. Hamza, Mayyadah Lutfi Abdulwahhab

Al-Esraa University College Journal for Engineering Sciences

Thermal insulation is one of the most important factors in achieving sustainability, increasing efficiency, and reducing energy consumption, but modern insulation materials are expensive, in addition to their availability. Therefore, through our research, we resorted to investigating the issue of reducing thermal load in buildings through the use of thick-walled facades in the southern and western facades, where we studied a building with two windows with windows on the southern and western facades and another without these windows and with thick walls, for two locations, the first in central Iraq, which is the city of Baghdad, and the second in …

The Impact Of Ethyl Levulinate Additive On Diesel Engine Performance And Emissions: An Experimental Study, Maha Ali Ghadbaan

Al-Esraa University College Journal for Engineering Sciences

This study explores the environmental and operational impact of adding Ethyl Levulinate—a biodegradable ester derived from biomass—to diesel fuel. A fuel blend known as B5El6 (comprising 5% biodiesel and 6% Ethyl Levulinate) was prepared and tested experimentally using a single-cylinder diesel engine operating at a constant speed of 1500 rpm under full load conditions. Performance metrics and emission data were recorded, and a Life Cycle Assessment (LCA) was conducted using the IMPACT2002+ methodology.

The results revealed that B5El6 significantly reduced greenhouse gas emissions (100 kg CO2 eq) and improved ecosystem quality. However, it presented challenges in terms of human health …

The Role Of The Scenario In Formulating The Contemporary Architectural Text, Rounaq Arif Mohsin, Abbas Ali Hamza, Bashar Shamil Alkhafaji

Al-Esraa University College Journal for Engineering Sciences

In order to create an integrated architectural text, which is a complicated art that blends beauty and practical elements, a rigorous design procedure is necessary. In this situation, the scenario’s role becomes crucial in developing the current architectural text and directing architectural approaches. In order to better understand how the scenario influences the design process and the interactions between various architectural aspects, this project intends to explore and analyze the impact of the scenario in developing and refining architectural text formulation approaches.

The study looks at the idea of a scenario and how it has been used in architecture, as …

Investigation Of Some Physical Properties Of Slurry Infiltrated Fibrous Concrete (Sifcon) Under Different Curing Times, Rand Kh. Mahmoud, Mohmmed Juad Khadhim, Fayq Hasan Jabbar

Al-Esraa University College Journal for Engineering Sciences

This research studied the effects of different types fibers (Basalt, Carbon and Basalt-Carbon hybrid mix) and curing ages (7, 14, 28 and 56 days) on some physical properties of - Slurry infiltrated fibrous concrete (SIFCON). Density, ultrasonic pulse velocity UPV, Poisson’s ratio and water absorption were measured for the experimental study with 30% cement replacement by Class F fly ash to increase sustainability. It was found that properties were significantly affected by the type and dosage of fiber admixture. The UPV was enhanced by basalt fibers and the absorption reduced up to an optimal range of 3–5% after which agglomeration …

A Study Of Perceptions, Readiness, Benefits, And Barriers Related To Exoskeleton Adoption In New Jersey’S Warehousing Sector, Terry Asante

Theses

The warehousing industry in New Jersey remains a vital component of the region's logistics network, employing more than 200,000 workers who routinely engage in lifting, bending, overhead reaching, and other physically demanding activities. These exposures contribute to musculoskeletal disorder (MSD) rates that exceed national averages, particularly affecting the low back and shoulders. Nationally, MSDs account for an estimated $420 billion in combined direct and indirect costs each year, underscoring the need for interventions that can effectively reduce biomechanical strain. Industrial exoskeletons have emerged as a potential solution, with prior research demonstrating reductions in muscle activation, perceived exertion, and fatigue during …

Mechanical And Durability Properties Of Cement Panels Reinforced With Hybrid And Pva Fibers, Shukran H. Faraj, Mohammed J. Kadhim

Al-Esraa University College Journal for Engineering Sciences

This study examines the synergistic effects of hybrid fibers (HF) and polyvinyl alcohol (PVA) fibers on the structural and thermal properties of silica-fume cement panels. Scanning electron microscopy (SEM) was employed to examine mortar mixtures with varying fiber content to assess their enhancement of microstructure. We conducted several experiments on compressive, flexural, and splitting tensile strength, in addition to water absorption and thermal conductivity. The results indicate that 1% HF exhibits superior mechanical qualities, with a compressive strength of 46.89 MPa, a flexural strength of 8.56 MPa, and a reduced thermal conductivity of 0.83 W/m•K. PVA fibers at 2% enhance …

Aerodynamics And Heat Transfer In Polymer Blown Film Processing: Experimental And Numerical Investigation, Mohammad Luqman Zulbakri, Nur Atiqah Mat. Rautin, Raa Khimi Shuib, Ku Marsilla Ku Ishak, Auratus Zuratul Ain Abdul Hamid, Mohamad Danial Shafiq, Mohamad Yusof Idroas, Muhammad Khalil Abdullah

Makara Journal of Technology

The effects of airflow dynamics, heat transfer, and mechanical properties on the HDPE blown film extrusion process were examined using a single-lip air ring with a fixed compressed-air valve opening angle of 10°. Reynolds numbers ranging from 9175 to 25911 were analyzed to understand their impact on cooling efficiency, bubble morphology, and film properties. Numerical simulations employing the Standard k−ω turbulence model in ANSYS FLUENT v2023, with mesh refinement achieving y+ ≈ 1, captured detailed flow and heat transfer behavior. Results showed that higher Reynolds numbers significantly enhanced the heat transfer coefficient, with values increasing from 1096 W/m²·K at Reynold …

Experimental Analysis Of Droplet Deformation Dynamics In Combined Dc Electric And Shear Flow Fields Using Dpiv, Ayad Ibrahim Khlewee

Al-Esraa University College Journal for Engineering Sciences

This paper presented a systematic study of such droplet deformation at the intersection of uniform DC electric field and hydrodynamic shear flow, in which we focused on conductivity ratio (R) and permittivity ratio (S), describing their influence. The results demonstrate that droplet dynamics is extremely sensitive to the regime: under DC only, either elongation or compression depending on whether R > S or R S, similarly to classical EHD predictions. Under shear-only conditions, deformation was dictated by the balance of elongational stresses (EC) and rotational stresses (RC), with increasing capillary number (Ca) leading to progressive elongation and oscillatory orientation dynamics. When …

The Imaginary In Architecture: The Conceptual Structure Of The Imaginary And Its Manifestations In Architectural Text, Noora Ghadir Hlail, Abbas Ali Hamza Al Greiza

Al-Esraa University College Journal for Engineering Sciences

This study explores the concept of the imaginary as a collective cognitive and cultural structure that shapes symbolic reality through images, myths, and deeply rooted symbols in collective memory. The research applies this concept within the field of architecture, aiming to understand how the imaginary is embodied in architectural texts as symbolic carriers of identity and cultural meaning. Adopting a descriptive-analytical methodology, the study develops a theoretical framework comprising key components—preconditions, mechanisms, and traits of the imaginary—and applies it to two selected case studies: the General Secretariat of the Iraqi Council of Ministers and the Louvre Abu Dhabi Museum. The …

Generative Ai For Method Development In Analytical Chemistry: A New Paradigm In Experimental Design And Optimization, Yasir Fathi Mahmood

Al-Esraa University College Journal for Engineering Sciences

The fast development of artificial intelligence (AI), especially generative AI models, is changing the environment of analytical chemistry. As classical method generation in analytical methods relies on manual trial-and-error methodology as well as statistical methods, generative AI is a new paradigm with automated generation of experimental methodology and optimization. In this paper, the authors discuss the use of generative AI-based technologies, including large language models (LLMs) and neural network-based generators, to create new, efficient, and customized methods of analysis. The paper examines existing applications, technology frameworks, and issues and offers a roadmap with regards to the future incorporation of generative …