Digital Commons Network^™

Application Of Reactive Power Theory To Wave Energy Converters Under Multi-Frequency Excitation: Analysis And Experimentation, Mckenna R. Collins

Dissertations, Master's Theses and Master's Reports

There is abundant energy surging in the oceans across the globe. However, there have been technological challenges in extracting that energy for use. Wave energy converter (WEC) technology is being developed to find innovative ways to convert wave kinetic energy into electricity, but there are still efficiency obstacles that inhibit large-scale use. Focusing on heave-point absorber control theory, this thesis continues the work to improve the efficiency of WECs. This is done by leveraging a superposition of linear mass-spring-damper models to analyze a WEC under multi-frequency excitation and applying proportional-derivative gains to each linear model. However, to analyze this system, …

Coupled Shrinking Core And Bubble Dynamics Model For Enhancement Of Metal-Water Reactions With Acoustic Cavitation, Troy Metz

Dissertations, Master's Theses and Master's Reports

Hydrogen is a valuable fuel. Hydrogen can be produced in several ways including thermochemical cycles, electrolysis, and metal-water reactions. Thermochemical cycles typically use high temperatures, often with corrosive species. Electrolysis requires high purity water. Metal-water reactions do not have these drawbacks. Activators such as lithium and gallium are often used to enhance metal-water reactions. However, these activators add to the complexity of metal-water reactions and may not work for all metals. A novel method to improve metal-water reactions is cavitation. During bubble collapse, shock waves and microjets are produced that can cause surface erosion. The objective of this work is …

Long Short-Term Memory (Lstm) -Based Neural Network Model For Optimizing Composite Manufacturing Process Using Autoclave, Sourav Bolar, Steven Corns, Nayan Pundhir, Kumbla Chandrashekhara

Engineering Management and Systems Engineering Faculty Research & Creative Works

Producing high-quality fiber-reinforced composites requires precise temperature control during autoclave curing, as even small variations can lead to defects that compromise strength and reliability. At the same time, manufacturers aim to reduce energy use and shorten curing cycles without sacrificing material performance. To address these challenges, this study develops a data-driven Long Short-Term Memory (LSTM) neural network model capable of forecasting temperature evolution inside the autoclave throughout the curing cycle. The model is trained on time-series temperature data collected from multiple sensing locations, enabling it to learn the spatial and temporal trends that govern heat flow during curing. Data augmentation …

Extending Low-Frequency Traveling-Wave Propagation In A Water-Filled Cylindrical Waveguide Using Active Impedance Control, William Slater

Open Access Dissertations

This dissertation investigates extending the frequency range over which a one-dimensional, plane traveling wave can be generated in a water-filled, steel-walled waveguide under ocean temperature and hydrostatic pressure conditions. The wave guide considered is a thick-walled, steel cylinder filled with a water/glycol mixture with a transducer at each end and a hydrophone array along the length. One transducer excites a plane wave while the other cancels reflections, resulting in a traveling wave in the waveguide. The current (open-loop) measurement system is advertised to generate traveling waves for low frequencies where only 3.4% of a wavelength can be measured (kL …

Passive Communication Across Diverse Swarm Formations And Scales Utilizing Wake Signatures For Messaging And Object Inference, Bryan Varela

Open Access Master's Theses

Passive wake signatures in fluid flows can support perception and low-rate communication in swarms. In cluttered or contested underwater environments, conventional acoustic, radio, and optical links can be power-hungry, intermittent, or undesirable when low observability is required. Wake-mediated cues offer a local, directional channel that does not require line of sight because each agent naturally sheds coherent vortices that persist downstream and can be sampled by followers with only a small number of probes.

This study evaluates whether sparse downstream probes are sufficient to infer agent attributes and decode simple messages from wakes generated by established source shapes. Computational fluid …

Development Of An Active Heave Compensation System On A Cost Effective Microcontroller For A Fiber Optic Tether Management System, Frances Truong

Open Access Master's Theses

Fiber optic tether systems are used for real-time data transmission to remotely operated vehicles (ROV) due to their ease of deployment and light weight, but are prone to damage from tension loads. An active heave compensation system applied to a fiber optic tether system can address these challenges by actively managing the tether payout to reduce peak loads. Tether management systems with active heave compensation have been in use for larger systems such as work class vehicles and offshore oil rigs, but few are developed for small maritime systems. This work focuses on the development and incorporation of an active …

Effect Of Kelvin Seamount On Acoustic Propagation, Lindsey Moss

Open Access Master's Theses

This thesis contains CUI. It cannot be distributed, exported, uploaded, or published until it has gone through the proper public release process.

Lift And Drag Benefits Of Morphing Aircraft, Joseph Lombardi

Master’s Theses

Aircraft use the ability to change the geometry of their wings to produce lift and drag as needed to maintain flight conditions. While the wings themselves are not physically changing shape, flaps and ailerons are used to alter the lift and drag coefficients experienced. Flaps have been used and changed over the years in order to produce better lift to drag ratios. The most commonly used flaps have been plain, slotted, and double slotted. Each type features slightly different mechanical structures, thus producing differing amounts of lift and drag. The introduction of new materials allow for a morphing flap to …

Electronic Bills Of Lading And Blockchain Technology: A Regulatory Perspective, Hsin-Hua Tsai

Journal of Marine Science and Technology–Taiwan

Information and communications technology (ICT) systems are increasingly relevant to the maritime sector. Regarding the revolution of the bill of lading, many shipping lines and other technology startups have been looking into developing viable electronic transport documents that have the same functions as paper bills of lading to reduce supply chain risks. The limitations of the paper-based process have become increasingly visible in the COVID-19 crisis. The main purpose of the article is to analyze the application of blockchain bills of lading, which utilizes computational logic to create the digital ledger, and users can set up algorithms and rules to …

Intelligent Formation Control Using Orfbls And Adaptive Backstepping Sliding-Mode Control To Address Uncertain Tilting In Multi-Quadrotors During Wind Gusts, Ching-Chih Tsai, Chun-Fu Mao, Kumail Hussain

Journal of Marine Science and Technology–Taiwan

In terms of aerial robotics, stable and precise formation control is a significant challenge for tilting multi-quadrotors during disturbances. This paper proposes a fixed-time formation control strategy for tilting multi-quadrotors to address the effect of external wind gusts. The observer accurately predicts environmental disturbances and an adaptive backstepping sliding-mode control (ABSMC) method with an output recurrent fuzzy broad learning system (ORFBLS) addresses these disturbances within a finite time. ORFBLS dynamically adjusts its structure through a growing ORFBLS structure to allow nodes to be added as needed. The method's stability is validated using Lyapunov stability theory and ensures the convergence of …

Visually Guided Landing System On Ship Deck For Multicopter, Dong-Lin Li, Shih-Kai Lee, Tzu-Hsiang Chou

Journal of Marine Science and Technology–Taiwan

Traditionally, high-value fish have been located at sea using helicopters. However, with advancements in technology, maritime drones have become increasingly important in recent years. Compared to traditional helicopter-based methods, drones offer significantly lower operational costs, making them cost-effective. However, the challenging sea conditions, including strong winds and the swaying motion of vessels, pose significant challenges for drone landings.

This paper proposes a stable approach for multicopter landing on ships at sea, incorporating improved marker detection, enhanced wind resistance control, and more accurate deck motion prediction. In the marker detection phase, we introduce a method to improve the accuracy of ArUco …

Direct Ink Writing Of Shear Exfoliated Two-Dimensional Nanomaterial- Elastomeric Multifunctional Nanocomposite, Md Abdur Rahman Bin Abdus Salam, Asif Hasan Ridoy, A K M Abirul Haque, Muhammad Shahbaz Rafique, Md Arafat Hossain, Md Shahriar Forhad, Matthew G. Boebinger, Farid Ahmed, Karen Lozano, Ali Ashraf

Manufacturing & Industrial Engineering Faculty Publications

Direct ink writing (DIW) of polymer nanocomposites with high loadings of two-dimensional (2D) nanofillers (graphene and hexagonal boron nitride (hBN)) is challenging because of potential clogging, use of hazardous solvents, and agglomeration. Here, in this work, a shear exfoliation and sieving method to prepare DIW ink with high loading of nanofillers produced from low-cost bulk layered materials such as graphite and bulk hBN powder for successful DIW printing without the use of any solvents, binders, or plasticizers. The single-step exfoliation technique resulted in a composite with substantial layer reduction along the c-axis, as confirmed by SEM, TEM, XRD, and Raman …

Combining Haptic Feedback With Electromyography To Study Knee Injury In Stationary Cycling, Christopher Kirby

Honors Theses

Patellofemoral Pain Syndrome (PFPS) is the most prevalent overuse injury in cycling, often linked to altered neuromuscular activation patterns of the quadriceps and hamstrings. While sensory feedback has successfully modified cyclists posture, there is a critical lack of evidence-based interventions targeting the underlying muscle activation imbalances associated with chronic knee pain. This study aimed to develop and validate a novel, real-time biofeedback system that utilizes electromyography (EMG) to trigger vibrotactile cues, aiming to shift muscle onset timing earlier in the pedal stroke to mitigate PFPS-related imbalances. A closed-loop system was engineered by integrating a Delsys EMG system with a SageMotion …

Effects Of Metal-Modified Catalysts On The Desorption Performance Of Mixed Amine Solutions And Machine Learning Prediction, Xunxuan Heng, Zhenzhen Zhang, Longhua Zhu, Li Yang, Shugang Xie, Zeyu Wang, Dongtai Han, Fang Liu, Kunlei Liu

Mechanical Engineering Faculty Publications

The high energy penalty associated with solvent regeneration is still a major bottleneck in amine-based CO₂ capture. In this work, the effects of five solid acid catalysts on the desorption performance of a mixed-amine solvent were compared, and the HY catalyst with superior desorption behavior was selected and further modified with four transition metals (Co, Mn, Gr and Ce) to enhance its catalytic activity. The findings indicate that the CO₂ desorption capacity and maximum desorption rate of the Co-modified HY catalyst reach 48.96 mmol and 0.02211 mmol/s, corresponding to increases of 36.80% and 35.39% relative to the blank …

System-Level Assessment Of Non-Ideal Phase Change Material Behavior In Low Earth Orbit Spacecraft Thermal Control Models, Nathan S. Bruursema

Dissertations, Master's Theses and Master's Reports

Phase change materials (PCMs) are of interest in spacecraft thermal control because their latent heat capacity can provide passive thermal buffering during transient or cyclic heat loads. PCM behavior is often treated using idealized assumptions such as repeatable phase transition temperatures, consistent thermal accessibility across cycles, and full latent recovery. However, practical PCM behavior may be affected by non-ideal phenomena such as supercooling, interfacial resistance, and degradation of internal transport accessibility. This thesis examines the system-level relevance of these effects for low Earth orbit (LEO) spacecraft thermal control and identifies the operating conditions under which non-ideal PCM behavior becomes design-relevant. …

Typology And Spatiotemporal Patterns Of Illegal Fishing Activities In The Philippines: Implications For Fisheries Management, Marlowe O. Acevedo, Tzu-Yun Ching, Chih-Shin Chen

Journal of Marine Science and Technology–Taiwan

Illegal, unreported, and unregulated (IUU) fishing activity is a global threat and continues to undermine the effectiveness of fisheries regulations and management measures. However, the extent of illegal fishing in Philippine waters remains unclear. This study aims to identify the types of illegal fishing in Philippine waters and analyzed their temporal and spatial patterns. Data were obtained from the records of the Philippine Coast Guards (PCG) and Maritime Law Enforcement Agencies from 2015 to 2020. A total of 602 apprehensions were recorded, resulting in 813 violations, of which 630 cases were fishery violations. Most of the watercrafts involved in the …

Smartbot V3: A Scalable Educational And Research Robotics Platform And Decentralized Construction Framework, Robert Tyler Cook

Graduate Theses, Dissertations, and Problem Reports (ETD)

Autonomous robotic systems are increasingly used in both engineering education and robotics research, creating a need for systems capable of supporting both within a common platform. This thesis presents SMARTbot V3, a scalable robotics platform developed to support undergraduate robotics education and multi-robot research.

SMARTbot V3 is a differential-drive mobile manipulator incorporating a 3-degree-of-freedom manipulator, LiDAR, RGB cameras, onboard computation, and Robot Operating System 2 (ROS2) software. The platform was designed to support scalable deployment through standardized hardware, modular construction, and common software. A fleet of twenty robots was manufactured and deployed for both educational and research activities. Educational validation …

Bridging Physics-Based Modeling And Machine Learning To Predict Material Behavior: Applications In Fatigue Crack Growth And Dielectric Property Characterization, Ansan Pokharel

Graduate Theses, Dissertations, and Problem Reports (ETD)

This dissertation integrates physics-based modeling with machine learning (ML) to predict how materials behave under complex thermal and mechanical conditions. A key innovation of this work is the use of finite element analysis (FEA) to supplement experimental data. This approach creates more diverse and representative synthetic datasets, helping to reduce the limitations and biases that arise when training ML models solely on experimental measurements. The research focuses on two applications: improving the prediction of fatigue properties in superalloys and estimating temperature-dependent, high-frequency dielectric properties relevant to microwave-based chemical processing.

In the first study, low-cycle fatigue experiments were performed on the …

Development Of Hydrogen Emissions Quantification Systems To Expand Understanding Of Leaks And Losses Associated With The Burgeoning Hydrogen Transportation Sector, Christopher Loomis

Graduate Theses, Dissertations, and Problem Reports (ETD)

To combat global warming, alternative fuels are being investigated. Hydrogen is at the forefront of this movement, advertised as having zero emissions due to the products of the energy reaction being only water. However, studies over recent decades indicate that hydrogen in the atmosphere acts as a form of greenhouse gas (GHG) by increasing the lifespan of methane in the atmosphere. Models are attempting to estimate the possible effects of a transition to a hydrogen-fueled economy but lack empirical data to provide confidence to these estimated values. There is little data that quantifies hydrogen from anthropogenic sources.

To address this …

Hvac Design And Calculations, Sarah Walters, Sarah Beyea

Williams Honors College, Honors Research Projects

This project studies Heating, Ventilation, and Air Conditioning (HVAC) systems for a car dealership located in Seguin, Texas. The building construction and architectural drawings were provided by EPIC Engineering Group. Comprehensive load calculations were done on the building in order to calculate necessary airflows throughout the building. Three possible HVAC design solutions were compared: Rooftop Units (RTUs), rooftop units paired with Variable Air Volume (VAV) Terminals with electric reheat, and Variable Refrigerant Flow (VRF) paired with a Dedicated Outdoor Air Unit (DOAS). Energy modeling was completed to compare the utility costs and energy consumption of each system. A comprehensive weighted …

Ai-Based Porosity Detection In Babbitt Bore Turning, Kaylee Leggett, Hannah Adams Gemmell, Kaisa Shingleton

Williams Honors College, Honors Research Projects

For this project, an external company reached out to the University of Akron requesting assistance with defect detection during their vertical turning operations. As babbitt is removed in a vertical turning process, it occasionally reveals defects, mainly porosity, which can lead to costly downstream failures of the part. Current inspection techniques involve use of dye penetrant, which is time consuming, labor intensive, unergonomic, and a source of human error. The goal of the project is to create an alternative inspection method using an AI-based machine-learning model. After the turning operation, a camera is deployed to perform an in-place inspection, taking …

Design New Stage For Vacuum Pin On Disk, Miranda Boyd

Williams Honors College, Honors Research Projects

For my senior design project, I am redesigning the moving stage for the vacuum pin-on-disk test used in the Akron Engineering Tribology Lab. This system is used to evaluate bearings and lubricants for aerospace applications under controlled vacuum conditions. The current stage design limits flexibility when adjusting for different testing parameters, so my goal is to develop a new movable stage that allows for varying weights and loads to be applied accurately and safely. The redesigned stage will improve test efficiency, adaptability, and precision, ensuring the system can accommodate a wider range of experimental conditions and materials while maintaining compatibility …

Lumacurve Control System Update, Jacob Kustra, Caleb Wengerd

Williams Honors College, Honors Research Projects

The existing track heater control system used by Lumacurve has become outdated and requires frequent maintenance due to inconsistent operation and component failures. This project aims to modernize the system through the implementation of a programmable logic controller (PLC), infrared non-contact temperature sensing, and an automated pneumatic ejection mechanism.

The redesigned system improves temperature monitoring accuracy and reduces operator intervention by automatically ejecting heated plastic tracks from the heater once the desired temperature is reached. An emergency ejection subsystem is also incorporated to safely clear tracks from the heater in the event of improper operation or system faults. Additional emphasis …

Length Modulatin Hip Implant, Ethan Smith

Williams Honors College, Honors Research Projects

Leg length discrepancy is a well-documented complication of total hip arthroplasty, commonly known as hip replacement surgery. Even small differences in leg length can lead to an altered gait, increased joint stress, and long-term postural issues that may affect a patient’s overall mobility and comfort. The current method for correcting this discrepancy often involves a follow-up surgical procedure, which extends recovery time and increases the physical and financial burden on the patient. To address these shortcomings, we developed a concept for an adjustable hip implant that can be lengthened noninvasively after surgery. The design incorporates an internally housed battery and …

Breaking The Vapor Barrier And Scale: Revolutionizing Steel Quenching With Ultrasound Technology, Anthony O. Santos

Williams Honors College, Honors Research Projects

The quenching process is a fundamental heat treatment used to enhance material properties by heating steel to its austenitizing temperature and rapidly cooling it to form high-strength martensite. However, this process is often hindered by two surface barriers: the Leidenfrost effect (vapor blanket) and oxide scale. These cooling limitations restrict the use of steel in high-performance aerospace applications due to inconsistent material properties and unpredictable engineering properties. This research investigates the use of fully submersible, 50-watt 40 kHz ultrasound technology to improve cooling rates in a Jominy test [4]. Through numerical simulations and experimental validation, the study demonstrates that acoustic …

Optimized Returning Floating System (Orfs/Orfeus), Jordan A. Mcclelland, Adam J. Belluardo

Williams Honors College, Honors Research Projects

We are developing a proof-of-concept modified guitar tremolo system for an electric guitar that can automatically optimize tuning adjustments when a player transitions between tuning schemes using a cam system. Currently, changing tunings takes about 10–15 minutes because adjusting the tension on one string affects the tension of the others. Our design aims to compensate for these interactions and significantly reduce the time required to switch tunings.

Large Telescope Mount For Long Exposure Photos, Payne M. Landis, Anna J. Gray

Williams Honors College, Honors Research Projects

When viewing the stars through a telescope, it is common that the object you are viewing drifts out of view. Many amateur astronomers seek to capture long exposure images of the stars, planets, and galaxies with commercially available sky tracking telescope mounts. The complication is that these telescope mounts are both incredibly expensive and have low weight limits. These issues limit accessibility to these products based on the telescope. For each person, telescope parameters determine the amount of light and magnification that can be viewed, which then determines exposures time for adequate photo results. The options on the market for …

Optimization Of Post-Processing Methods For Additively Manufactured Metals, Julia R. Carano

Williams Honors College, Honors Research Projects

Ultrasonic Nanocrystal Surface Modification (UNSM) is a process used to change the surface hardness of flat-faced materials. It is a machining process using a high-powered laser and a blunt-tipped tool at high speeds which aims to improve the uniformity of the surface on most metals. By heating and pressing the surface of the workpiece, the grains of the material become less rounded and more cohesive on a microscopic level. This, ideally, results in a workpiece with improved material properties. The changes were previously observed through hardness testing.

Thermal Radiation Effects On Particles From Plasma Arc Radiation, Reece Davis, Joseph Mcgee

Williams Honors College, Honors Research Projects

Understanding the radiation heating and transport of both microparticles and nanoparticles is a phenomenon that is critical for both space and Earth sciences. In space, these particles are heated by plasma arcs within ionized space clouds or solar flares and can be present the path of deep space missions and orbital satellites. While on Earth, processes such as forest fires, nuclear fusion, and microchip manufacturing include the plasma arc heating of particles. These particles lay within the Mie Scattering Regime and Rayleigh Scattering Regime and emit radiation differently based on their diameter. New mathematical and computational modeling has been conducted …

Akron Soap Box Derby Super Kids Car, Alexis Schultz, Cooper Sites, Sean Stevenson

Williams Honors College, Honors Research Projects

This project aims to redesign the All-American Soap Box Derby Super Kids vehicle to enhance safety, accessibility, and performance while maintaining full compliance with official regulations. The Super Kids program enables children with physical and cognitive disabilities to race alongside a co-pilot, but the current vehicle design presents challenges in stability, entry/exit accessibility, and control—especially following recent regulation changes that increased vehicle speed. The redesigned car will focus on improved ergonomics, lightweight construction, and structural integrity within a $1,000 budget and a 165 lb weight limit.

An iterative engineering design process will guide the project through research, CAD modeling, FEA …