Digital Commons Network^™

Test 494: Ford Naa, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Test 493: John Deere 70, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 70 TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Test 492: Farmall Super H, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Test 491: Mccormick Super W-4, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Test 490: John Deere Model 60 (All Fuel), Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Parts Catalogue: Case Va, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Advertising Brochure: Case Si, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 490: John Deere 60 All-Fuel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere John Deere 60 All-Fuel

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT …

Test 513: John Deere 60 Lpg, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 60 LPG TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS …

The Holding Strength Of Crimps On Tubes, Aydin Cansever

Masters Theses

"The object of this thesis is to determine by analytical means and laboratory tests the holding force of various crimp methods of fastening sheet metals and special tubing. The study is conducted with heat treated Aluminum alloy 24S.T3.

The problem of joining relatively thin walled tubing of high strength material or the application of a plug to such a tube has been investigated by many manufacturers, but the literature in this field is limited and still there are many cases where a better method may prove very useful. At the suggestion of Dr. Aaron J. Miles, the author decided to …

Parts Catalogue: Case Vai, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 514: John Deere 70 Lpg, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 70 LPG TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS …

Metallurgical Pulp Mill Processing For The White Pine Copper Company Project, White Pine, Michigan, Steve Theodorides

Professional Degree Theses

No abstract provided.

Crimp Method Of Closure Of Small Pressure Vessels, Zafiri Bersu

Masters Theses

"The object of this thesis is to design a means of closing the ends of thin aluminum alloy tubing in the 1” O.D. to 2” O.D. by .035 to .065 inch thick sizes, so that the closure will withstand internal hydrostatic pressure sufficient to burst the tube along the longitudinal element.

The aim is to approach the ultimate mechanical efficiency possible, and at the same time to keep actual production in mind.…

Summarizing the aims of this investigation, it can be said that the objectives of this investigation are:

1. To design ends for closed vessels.
2. To form the designs.
3. To …

Photoelastic Investigation Of The Stresses In A Capless Connecting Rod, Gerald Delaine Smith

Masters Theses

"For a great many years the primary method used to solve engineering problems was by the use of mathematics. However, rigorous and simple mathematical solutions are only possible if the geometry of the member and its loadings are relatively simple. When irregular shapes with complex loadings are encountered, rigorous mathematical solutions for stresses induced are either impossible or very cumbersome. In such cases, the engineer must resort to other methods which are available today.

This paper attempts to show the application of the photoelastic method to such a problem. Moreover, it will show the comparative ease with which the designer …

Effect Of Viscosity On The Cetane Number Of A Diesel Fuel, Moris Bolay

Masters Theses

"The object of this paper is to determine or rather experimentally establish the effect of a change in viscosity of a given diesel oil in regard to the ignition quality (cetane rating) of the oil.

The author did not attempt to prove why or find out how much the cetane number was affected. But, merely, tried to experimentally verify the fact that the cetane number of the fuel used underwent a change when its viscosity was decreased by preheating it.

Since his professional interests lie in the field of automotive engineering, several thesis problems were suggested to him by Dr. …

Test 489: Oliver Oc-18, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 487: Cockshutt 50*, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 488: Cockshutt Model 50, Nebraska Tractor Test Lab

Nebraska Tractor Tests

This report and any related files are made available to the online through the Lester F. Larsen Tractor Test and Power Museum as resources allow. Established in 1998, this museum is located on the University of Nebraska-Lincoln East Campus. It is and appropriately housed within the walls of the historic 1920 Nebraska Tractor Test Laboratory, where the first tractor test was started on March 31st, 1920. Because the pioneer tests became worldwide standards, this location was designated as a Historic Landmark of Agricultural Engineering by the American Society of Agricultural Engineers in 1980, shortly after testing was moved to a …

Test 486: John Deere 50, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere 50 TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear. This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated. BELT HORSEPOWER TESTS TEST …

Test 484: Mccormick Farmall Super M Lpg, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 485: Mccormick Super W-6 Lpg, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 483: Economy Special, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 482: Case La, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 481: Case La, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 480: Case La, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 478: Mccormick Super Wd-6, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 477: Mccormick Farmall Super Md, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 475: Mccormick Farmall Super M, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 476: Mccormick Super W-6, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.