Digital Commons Network^™

Gradient Fibro-Porous Materials For Tailored Sound Absorption, William Johnston, Janith Godakawela, Bhisham Sharma

Michigan Tech Publications

Reducing the pore size of bulk sound absorbers often increases weight and introduces manufacturing challenges, limiting their practical use. To address these issues, a class of materials is introduced that uses 3D printing to seamlessly integrate fibers within porous scaffolds, allowing improved sound absorption performance without a significant weight addition. The reliance on 3D printing enables the creation of gradient fibro-porous structures with customizable acoustic properties. This study explores the effect of through-thickness gradients in the scaffold’s relative density, fiber thickness, and fiber density on the acoustical performance with the goal of identifying the optimal strategy to obtain broader and …

Estimating Pedestrian Crossing Times At Scramble Crossings Via Machine Learning And Agent-Based Modeling, Sho Takami

Honors Capstones

Scramble crosswalks differ from conventional crosswalks in their ability for pedestrians to cross diagonally. This research compares the average crossing times and investigates the walking behaviors that pedestrians adopt to produce the speediest times in the two crosswalk configurations. Identification of the most efficient set of walking behaviors is done through an agent-based model, whereas producing polynomials relating crossing times to the most prominent walking behaviors is done through regression algorithms in machine learning. With the combination of these two approaches, it is revealed that pedestrians must adopt a relaxed walking style to make each crosswalk configuration efficient. Additionally, between …

Pressure Switch Tester, Michael Starasinich, Andrew Dobson, Jordan Huschen, Mitchell Smith, Melvin Brown Iii

Honors Capstones

Abstract—- The Pressure Switch Test Stand is a comprehensive and automated testing solution designed to streamline the actuation and validation of simultaneously. At the core of the system is a PLC-controlled architecture that enables precise control and simulation of pressure conditions, replicating real-world scenarios to ensure accurate and reliable switch performance.

This test stand integrates robust mechanical fixtures, a reliable pneumatic control system, custom-designed electrical circuits, and a modular software interface, working in unison to deliver consistent and high-fidelity testing outcomes. Each pressure switch undergoes a sequence of pressure ramps and holds, with the system continuously monitoring switch states, activation …

Autonomous Agricultural Equipment Evaluation For Broad-Acre Crop Production, Sofia Bahmutsky, Ashutosh Singh, Travis A. Burgers, Roy Maki

Mechanical Engineering Faculty Publications

No abstract provided.

A Review Of Disassembly Systems For Circular Product Design, Giovanni Formentini, Joao Pj. Prioli, Junwon Ko, Buddhika M. Hapuwatte, Vincenzo Ferrero, Fazleena Badurdeen, Jeremy L. Rickli, Devarajan Ramanujan

Mechanical Engineering Faculty Publications

Circular Economy (CE) is described as a means for maintaining products and materials in circulation while regenerating nature. This shift requires considering aspects at the product design phase that were not previously prioritized. One such aspect, disassembly, is a key enabler for CE. Design for Disassembly methodologies have been deployed for several years to enhance disassembly performance. However, when CE is of interest, it is essential to consider how disassembly affects the entire product life cycle system. In this regard, this paper proposes a literature review of relevant DfD methods from a system engineering perspective to evaluate their effects on …

Collecting Human Subject Data For Modeling Maximum Potential Power At Specific Cadence And Fatigue Levels, Alexander John Minnich

Honors College Theses

The overarching goal of this research project was to investigate the relationship between a participant's maximum power (Watts) at a given cadence (RPM) on a specific fatigue level. Before conducting any experiments, we hypothesized that maximum power and cadence would decay linearly with fatigue. To do this, six days of testing for each of 4 human subjects were split across two phases. The first 4 days were devoted to Phase one, which focuses on determining the physical abilities of each unique participant and finding metabolic constants such as Critical Power and Anaerobic Work Capacity. Phase two then tests maximal power …

Novel Atomic Layer Deposition Processes Of Silver For Battery Applications, Darlington Ehijie Imhanzuaria

Graduate Theses and Dissertations

This thesis presents a novel approach to enhance the performance and stability of anode-free lithium-ion batteries (AFLBs) by employing atomic layer deposition (ALD) to coat copper (Cu) current collectors with a silver-aluminum oxide (AgAlO_x) layer. Leveraging the unique capabilities of ALD for precise and conformal deposition, the AgAlO_x coating was achieved using triethyl phosphine-(6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedionato)-silver(I) (Ag(fod)(PEt₃)), trimethylaluminum (TMA), and de-ionized water (H₂O) as precursors. This innovative coating method significantly enhanced the cycling stability and Coulombic efficiency (CE) of both Li||Cu and Cu||NMC811 cells, as evidenced by improved electrochemical performance metrics. The AgAlO_x layer …

Sample Archival System For Quantum Device Manufacturing: Design, Construction, And Integration, Corbin Russ

Graduate Theses and Dissertations

In the manufacturing of quantum devices using 2-dimentional (2D) materials, current processes rely on manual operations of production. MonArk Quantum Foundry is developing a facility to semi-automatically, and ultimately automatically, produce 2D materials. One crucial step in the experimentation process is archiving these materials and completed chips for future access. The sample archival system robot was produced to fulfill this need. The system is a 4 Degree-of-freedom (DOF) cartesian storage system that stores custom aluminum chip trays of sixty samples, having a total storage capacity of 14,400 samples. The sample archive system meets key goals from: it integrates with the …

Development And Investigation Of A Novel Near-Wall Methodology For Large-Eddy Simulation Based On Dynamic Hybrid Rans-Les, Michael Tullis

Graduate Theses and Dissertations

The use of computational fluid dynamics (CFD) to test engineering designs with reduced cost and time compared to physical testing has become increasingly common in a range of industries and research fields. While numerical methods exist that can accurately solve the equations that govern the flow of fluids, these methods are computationally expensive for practical engineering problems due to the large amount of computational power needed to resolve the fluid flow over the entire range of length and time scales. Several different approaches have been introduced to address this computational cost issue, namely Reynolds-averaged Navier-Stokes (RANS) modeling and scale resolving …

Validating An Electronics Cooler Experiment And Optimizing Its Performance Using Ansys Icepak, Daniel V. Curl

Mechanical Engineering Undergraduate Honors Theses

Researchers at the University of Arkansas' Mechanical and Electrical Engineering Research Departments have designed and built a cold plate and substrate design for a 10 kV SiC MOSFET power module. Many variables define the design of the cold plate and substrate system and have quantifiable effects on the device’s performance. These variables include but are not limited to geometry and material selection of the fins and substrate. Manufacturing many test designs, running experiments, and comparing their performance is a time-consuming and expensive design optimization method that may be effective for some low-cost applications. Still, simulation is often a more cost-effective …

Thermal Characterization Of 3d Printing Materials For Increasing Insulation Potential And Practicality, Jackson H. Minnick

Mechanical Engineering Undergraduate Honors Theses

This study served as an exploration into the possible existence of a correlation between the infill lattice structure of a 3D printed wall section and the thermal performance of that sample as characterized by thermal conductivity measured in units of Watts per meter Kelvin. With the continual increase in the practicality, fidelity, and applicable fields of additive manufacturing, namely FDM 3D printing, research on specific print characteristics and their effects on the material and thermal characteristics of the part in question is steadily becoming more commonplace. Although the thermal conductivity of 3D printed wall sections as a function of infill …

Introduction To Building Energy Modeling And Analysis Using Energyplus, Jackson C. Burnett

Mechanical Engineering Undergraduate Honors Theses

Retail stores are dynamic environments where human activities significantly influence energy consumption patterns, particularly affecting heating, ventilation, and air conditioning (HVAC) demands. Existing energy models, such as those developed using EnergyPlus, often rely on generalized assumptions about human occupancy and behavior, leading to discrepancies between predicted and actual energy usage. This research aimed to enhance the accuracy of energy modeling for retail stores by conducting a sensitivity analysis of occupancy using EnergyPlus simulations. The study investigated how variations in occupancy levels impact HVAC loads, cooling and heating demands, and overall energy use. Results showed that increasing occupancy leads to higher …

Computational Modeling Of Torque Arm And Load Cell Interactions In Uta Racing Brake Dynamometer, Anthony A. Aiyedun

2025 Spring Honors Capstone Projects - Archive

The UTA Racing Team is developing a brake dynamometer to measure the coefficients of friction of various brake pads and calipers under controlled conditions. The dynamometer simulates on-track braking scenarios, testing brake pads at temperatures up to 1300ºF and pressures similar to racing environments. Its primary goal is to generate accurate friction vs. temperature graphs for various brake pad and rotor combinations, addressing the need for dedicated testing equipment. This project creates an ANSYS simulation of the torque arm and load cell interaction. The computational model accurately represents the relationship between applied torque and measured load cell force, incorporating precise …

Design Of A Helical-Type Rotor For Enhanced Energy Harvesting In Smallscale Vertical Axis Wind Turbines, Aadee M. Mitee

2025 Spring Honors Capstone Projects - Archive

This research investigates the design optimization of a small-scale Vertical Axis Wind Turbine (VAWT) utilizing helical rotor blades fabricated from graphene-reinforced polyethylene terephthalate. While previous studies have largely concentrated on largescale turbines for rural environments or on high-performance composite materials that often compromise recyclability, this research addresses the specific challenges associated with small-scale VAWTs intended for urban and populated areas. The study identified tip speed ratio, helical angle, and blade length as critical design parameters. Optimization of these parameters was achieved through systematic evaluation of their impact on the turbine’s aerodynamic performance, quantified by the coefficient of performance. Structural and …

Training Lander For Rover Arm Testing, James Peck

Undergraduate Honors Capstone Projects

The purpose of this honors capstone project is to design and fabricate a training lander to support the Utah State University (USU) rover team in preparation for the University Rover Challenge (URC). The URC is an international collegiate competition featuring four missions, one of which—the Equipment Servicing Mission—demands a high level of robotic arm functionality and operator skill. Historically, USU's rover teams have struggled to qualify for the URC finals, in part due to limited hands-on training opportunities with the robotic arm.

To address this gap, the training lander replicates the tasks found in the URC Equipment Servicing Mission, such …

Designing And Modeling An Exoskeleton Mobility Device For Individuals With Paraplegia, Dan O'Crowley

All Graduate Reports and Creative Projects, Fall 2023 to Present

The objective of this project is to design and develop a lightweight mobility exoskeleton for individuals with paraplegia that enables transportation of the user in a standing position, supports the user during the sitting to standing transition, and can be loaded by the user into a vehicle. A device like this has the potential to mitigate many negative health impacts of seated mobility devices, reduce social barriers, increase job opportunities for the user, and improve independence, while providing cost savings for the users and the healthcare system.

The system consists of a 3-linkage inverted pendulum with motors at the knee …

Thermal Characterization Of Lithium-Ion Batteries Under Fast Charging Conditions Using Infrared Imaging., Gowthaman Punithakumar

Electronic Theses and Dissertations

Lithium-ion batteries are widely used across various industries due to their long lifespan, high energy density, low self-discharge rate, and absence of memory effect. However, fast charging of Li-ion batteries can cause problems like lithium plating, mechanical damage, and overheating. Temperature plays a key role in battery performance. Measuring temperature accurately is important to improve battery life, efficiency, and safety. However, accurately measuring a battery's internal temperature remains challenging, and the appropriate measurement method depends on factors like range, accuracy, resolution, and cost. Choosing the right temperature measurement method depends on range, accuracy, resolution, and cost. In this study, we …

Bayesian Model Updating Of Structural Parameters Using Temperature Variation Data., Ujjwal Adhikari

Electronic Theses and Dissertations

Physical digital twins have now emerged as a technology in structural health monitoring and other domains of structural modeling. A Finite Element Model can be a tool for digital twin technology in conjunction with measured physical data. Developing an accurate digital model requires the integration of various parameters to replicate the real structure; however, temperature is dynamically changing, resulting in difficulty in the identification of structural parameters. Typically, temperature is considered noise or filtered out. Limited research has addressed the physics-based model using temperature variation related to structural modal properties. Finite Element Model Updating (FEMU) is a typical inverse problem-solving …

Integrity Assessment Of Shipping Line Pipelines Using Risk-Based Analysis To Determine Risk And Maintenance Strategies, Ade Ratih Anggraini, Dwi Marta Nurjaya

Journal of Materials Exploration and Findings

Pipeline Shipping Lines X, Y & Z are classified as critical infrastructure, being the only transportation through the crude oil lifting from P and R location to the transfer station in NM Area. To maintain the workflow of the Shipping Line, integrity assessments and risk evaluation are required to ensure the operational and safety. Anomalies were found by analysing inspection, monitoring, and repair data, while the pipelines' future integrity was assessed by calculating the remaining life. Risk-Based Analysis (RBA), which is a modification of Kent Muhlbaeur's method, is employed to conduct the risk assessment using the Probability of Failure (POF) …

Assessment Of H2s-Induced Cracking Susceptibility In Steam Line Pipes And Weld Zones During Geothermal Well Construction, Riene Kaelamanda Pragitta, Yudha Pratesa

Journal of Materials Exploration and Findings

The susceptibility of steam line pipes, especially in the HAZ (heat-affected zone) and weldment areas, to hydrogen sulfide in the geothermal industry is crucial to understand from the early stages, particularly during construction. The combination of tensile stress from residual stresses after welding and metallurgical phase transformation makes the joint areas vulnerable to sulfide stress cracking. This condition becomes even more extreme when the equipment operates during the well stimulation phase. This research assesses the severity of H₂S-induced cracking using NACE MR0175 and ISO 15156-1 standards, focusing on the effects of pH and partial pressure of H₂S (p_{H₂S …}

Effects Of Thermal Interface Materials On Thermal Conductivity Measurement Using A Modified Astm D5470 Thermal Resistance Tester, Chinmaya Joshi

Mechanical Engineering Undergraduate Honors Theses

In this paper, we have investigated the effect of thermal interface materials (TIMs) on the accuracy and uncertainty of thermal conductivity measurements. A modified ASTM D5470 thermal resistance tester (TRT) is developed to measure the out-of-plane thermal conductivity of pyrolytic graphite (PG) and grade 2 titanium (TiG2) with and without TIMs. Compared to the ASTM D5470 standard, this modified design uses three thermocouples per side to support regressive analysis and explores the use of TIMs.s Nine PG samples and four TiG2 samples of varying thickness have been tested to obtain thermal resistance as a function of sample thickness. The steady-state …

Design And Optimization Of Aquaculture Gear: Development Of A Cage-Integrated Reeling Mechanism For Oyster Farming, Felicity Bryant

Honors Theses

This project encompasses the design, fabrication, and testing of a cage-integrated reeling system aimed at reducing the physical labor required in oyster aquaculture at Bama Bay Oyster Farm, the last operational oyster farm in Mobile Bay. The proposed system includes two primary components: lightweight, modular oyster cages and a dual-winch reeling device for automated retrieval. Three cage prototypes—rectangular, oval, and hexagonal—were evaluated for structural performance and fabrication feasibility. The oval design was ultimately excluded due to practical fabrication limitations. The rectangular and hexagonal designs were fabricated using recycled materials and tested under the most extreme environmental conditions derived from years …

Reconfigurable Python Autopilot Software For Rc Aircraft, Kate Doiron

Honors Theses

No abstract provided.

Reinforcement Learning For High-Dimensional Tradespace Exploration In Multi-Objective Optimization, Aaditya Kothavade

All Theses

Engineering design optimization often requires balancing multiple competing objectives while navigating complex, high-dimensional tradespaces. Despite significant advances in tradespace exploration techniques, current methods face critical challenges in efficiently navigating high-dimensional design spaces. As the number of design variables and competing objectives increases, traditional multi-criteria decision-making and optimization methods struggle to explore the vast solution space comprehensively. The curse of dimensionality exacerbates this issue, making it impractical to analyze all possible solutions and effectively identify trade-offs between objectives. Additionally, the computational complexity of high-dimensional spaces further complicates optimization, making exhaustive solution analysis infeasible. Traditional multi-objective optimization methods rely on static Pareto-front …

Stability Of Holes In Granular Raft, Plabon Kumar Saha

All Theses

A granular raft at an oil–water interface exhibits unique mechanical properties, including the ability to form and sustain stable holes. In this study, we experimentally investigate the formation, stability, and collapse dynamics of holes in particle rafts composed of micrometer-sized particles. Holes are created using a hollow cylinder, which generates a meniscus that inhibits particle motion, thus stabilizing the hole. Stable holes are formed when their size reaches a critical value, which depends upon the capillary length. The critical hole size does not depend upon the circularity of the hole. We show that capillary forces due to the presence of …

Micro Wind Turbine - Modelling And Testing, Mohammad Uzair Bhati

All Theses

The global energy demand continues to rise as people consume more electricity to power their personal electronics, electric vehicles, and consumer products such as outdoor tools. To generate renewable energy, large scale solar and wind farms continue to receive the most commercial attention. However, portable wind energy turbines have the potential to generate sufficient power for cell phones and other electronic devices. There are two types of wind turbines, horizontal and vertical axis each having their pros and cons. Vertical-axis wind turbines are the main focus of this thesis, with a reduction in their form factor or size and portable …

Developing Reduced Order Models For Gas Bubble Formation In Irradiated Metals Using Integrated Phase Field Modeling And Koopman Operator Theory, John M. Eggemeyer V

All Theses

Irradiation damage in materials is prevalent in nuclear components, posing significant risks in the safety and reliability of nuclear reactors. Phase field models offer a versatile framework for modeling irradiation damage in materials at mesoscales. Such high fidelity method has been used to model the formation of fission gas bubbles superlattice, a microstructure array occurs at certain irradiation conditions (dose, dose-rate, and temperature). To overcome the high computational cost of phase field modeling, Koopman operator theory is applied to create reduced order models, allowing for instantaneous simulations of fission gas bubble behaviors. These low fidelity models are integrated into machine …

An Experimental And Computational Study Of High-Temperature Creep Behavior In Fully Lamellar Titanium Aluminide Alloys, Karel M. Ziminsky

All Theses

Titanium aluminide alloys have seen increased aerospace applications in recent years, especially in aircraft jet engines. They can offer benefits such as improved high-temperature strength compared to titanium alloys and reduced density compared to nickel alloys. These alloys also can exhibit high creep resistance due to their fully lamellar microstructure. These mechanical properties are desirable for components like turbine blades, where tight tolerances must be maintained for optimal performance. This research examines the high-temperature creep behavior of a fully lamellar two-phase titanium aluminide alloy, TNM® (Ti-43.5Al-4Nb-1Mo-0.1B), through experimental and computational methods. Scanning electron microscopy studies reveal the presence of large …

Signal Modeling Of High Purity Germanium Detectors, Brooke Parker Thibodeau

Honors Scholar Theses

Pulse shape analysis can be used to analyze radiation incident on a semiconductor diode detector. Finite element analysis (FEA) can be used to simulate high purity germanium detectors with user-specified geometry, impurity concentration, and bias voltage. Subsequent streamline calculation can be used to conduct pulse shape analysis for single and multiple site gamma-ray interactions within the detector volume. Cross sections of the detector can be visualized by contour plots of the electric field, drift velocity magnitude, and collection time, as well as t30 and t90 rise-time values.

Causes And Contributing Factors In General Aviation Fixed-Wing Stall And Spin Accidents, Lauren Westfall

Mechanical Engineering Undergraduate Honors Theses

General Aviation operations are all civil aviation operations excluding commercial airline operations and cargo transport. General Aviation accidents comprise approximately 94% of all aviation accidents in the United States annually. Stall and spin accidents are the third most common causes of fatal General Aviation accidents, accounting for 7.28% of such accidents in 2013–2022. The National Transportation Safety Board investigates and records all General Aviation accidents in the United States. Using the National Transportation Safety Board’s accident database, I investigated stall and spin accidents between 2013 and 2022 to find (1) the most common phases of flight where stall and spin …