Digital Commons Network^™

Time Aliasing Methods Of Spectrum Estimation, Jason F. Dahl

Theses and Dissertations

Time aliasing methods of spectrum estimation alter the time representation of a signal for the purpose of improving its frequency domain representation. Time aliasing allows characteristics of longer time window functions to be used with shorter DFT length. Windows designed specifically for use with time aliasing have improved properties compared to conventional windows. Many previous uses of time aliasing, including overlap-and-add methods of digital filtering, have focused on the elimination of time aliasing effects in the frequency domain in order to improve the representation of reconstructed signals in the time domain and have not addressed the issues associated with spectrum …

Acoustical Characterization And Parameter Optimization Of Polymeric Noise Control Materials, Emile N. Homsi

Dissertations

The sound transmission loss (STL) characteristics of polymer-based materials are considered. Analytical models that predict, characterize and optimize the STL of polymeric materials, with respect to physical parameters that affect performance, are developed for single layer panel configuration and adapted for layered panel construction with homogenous core. An optimum set of material parameters is selected and translated into practical applications for validation.

Sound attenuating thermoplastic materials designed to be used as barrier systems in the automotive and consumer industries have certain acoustical characteristics that vary in function of the stiffness and density of the selected material. The validity and applicability …

Evaporating Crossflow Sprays In Gas-Solid Flows, Guangliang Liu

Dissertations

Injection of evaporating sprays into gas-solid flows is encountered in many engineering processes such as energy production industry and chemical industry. The phenomenon involves phase change, three-phase interactions, heat and mass transfer. All of these characteristics control the process efficiency, pollutant production and product quality. However, very limited studies are available on the evaporating spray jets in gas-solid flows, especially on the spray evaporation rate within a gas-solid medium. A combined study of experiments and theoretical analysis has been carried out here to investigate the fundamental mechanism of evaporating Crossflow spray jets in gas-solid flows.

In this study, in addition …

Developing A Sensing System For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic: Quarterly Progress Report (Nov. 01 – Jan. 31, 2002), Yingtao Jiang, Bingmei Fu, Woosoon Yim

Transmutation Sciences Materials (TRP)

The design of the new apparatus for oxygen measurement/calibration has been completed. This new apparatus shall be of great importance for the UNLV researchers to conduct the research work in the campus.

Implementation Of A Two-Dimensional Discrete Element Method To Describe Granular Materials Composed Of Elliptical Cohesionless Particles, Juan Jose Martinez Alvez

Theses

This work is aimed at developing a discrete element simulation that models the contact between elliptical grains or particles in granular materials. The goal is to implement an algorithm to carry out collision detection between ellipses as well as ellipsoidal objects. The practical issue here is that the real shape of macroscopic grains can be approximated better using elliptical curves than using spherical curves. In addition, the simulation model will also be valid for spheres, since these objects are special cases of ellipsoids.

An accurate contact detection algorithm was investigated by means of two different formulations. The first formulation determines …

Electrohydrodynamical Manipulation Of Particles Based On Dielectrophoresis, Oleksii Vasylyschuk

Theses

The movement of matter in a non-uniform electric field, termed dielectrophoresis, is of interest to scientists of various branches: physics, chemistry, engineering, and life science. To chemists and physicists it is a science of many varied phenomena. To engineers it is a source of new and useful techniques for separating materials or improving materials’ behavior. To ecologists it provides a major means of minimizing pollution. To life scientists it offers new ways to study and manipulate cells and their subparticles, and to help unravel the nature of living systems.

The purpose of this thesis is to concentrate on some aspects …

Computer Simulation Of Automotive Disc Brake Noise, Vadims Milovs

Theses

Disc brake noise continues to be a major concern throughout the automotive industry despite efforts to reduce its occurrence. Many articles are written on this subject, but there still is no agreement on what exactly causes disc brake noise and what part of the braking system is responsible for it.

The goal of current research was to build a simplified but inclusive mathematical model of a disc brake system and investigate it using Matlab software. The twodimensional model including damping, Stribeck effect and stick-slip friction was built.

The model is unique in a way that all the similar models have …

Reynolds-Stress Turbulence Model In The Kiva Code For Engine Simulation, Yeow-Khern Siow

Dissertations, Master's Theses and Master's Reports - Open

A Reynolds-Stress Turbulence Model has been incorporated with success into the KIVA code, a computational fluid dynamics hydrocode for three-dimensional simulation of fluid flow in engines. The newly implemented Reynolds-stress turbulence model greatly improves the robustness of KIVA, which in its original version has only eddy-viscosity turbulence models. Validation of the Reynolds-stress turbulence model is accomplished by conducting pipe-flow and channel-flow simulations, and comparing the computed results with experimental and direct numerical simulation data. Flows in engines of various geometry and operating conditions are calculated using the model, to study the complex flow fields as well as confirm the model’s …

Developing A Sensing System For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic, Yingtao Jiang, Bingmei Fu, Woosoon Yim

Transmutation Sciences Materials (TRP)

Lead-bismuth eutectic (LBE) is a candidate as a spallation target in sub-critical transmutation systems and as a coolant in nuclear programs. One of the primary concerns with LBE systems is the corrosion of stainless steel, the primary structural material used in nuclear systems. To mitigate this problem, trace levels of oxygen can be introduced into the system, causing the formation of a protective oxide layer at the interface between the LBE and steel. To protect the steel components, this oxide layer must be properly maintained. However, too much oxygen will produce unwanted oxide precipitation within the coolant and elsewhere in …

Effects Of Environmental Variables And Stress Concentration On Target Materials, Sudheer Sama

Transmutation Sciences Materials (TRP)

This paper presents a brief summary on stress corrosion cracking (SCC) behavior of alloy HT 9. The susceptibility of this alloy to SCC was evaluated by using constant load and slow strain rate test techniques in neutral and acidic solutions at ambient temperature and 90°C. A proof ring was used to apply tensile load to the smooth specimen for 30 days in constant load testing. In slow strain rate testing, the specimen was continuously strained in tension at a rate of 3.3 × 10^-6 sec^-1 until fracture.

Effects Of Environmental Variables And Stress Concentration On Cracking Of Spallation Target Materials, Ajit K. Roy, Ramprashad Prabhakaran, Mohammad K. Hossain

Transmutation Sciences Materials (TRP)

This paper presents the results of stress corrosion cracking (SCC) studies of two martensitic target materials, namely Alloy EP-823 and Type 422 stainless steel. The susceptibility to SCC was evaluated by using constantload and slow-strain-rate (SSR) test techniques in neutral (pH: 6-7) and acidic (pH: 2-3) aqueous solutions at ambient temperature and 90^oC. A proof ring was used to apply tensile load to the smooth cylindrical specimen for 30 days in constant-load testing. For SSR testing, the specimen was strained in tension until fracture at a strain rate of 3.3 x 10^-6 sec^-1.

Stress Corrosion Cracking Of Type 422 Stainless Steel, Ramprashad Prabhakaran

Transmutation Sciences Materials (TRP)

This paper presents the results of SCC tests of quenched and tempered martensitic Type 422 SS in neutral and acidic aqueous environments at ambient temperature and 90^oC.The susceptibility of smooth and notched tensile specimens to SCC was evaluated by using constant load (CL) and slow strain rate (SSR) test methods. During CL testing, a calibrated proof ring was used to apply a constant load to the test specimen. The magnitude of the applied stress was based on ambient temperature yield strength of the material. On the contrary, the test specimen during SSR testing was continuously strained in tension …

The Biomechanical Aspects Of Pedestrian Protection, Krishnakanth Aekbote, Peter Schuster, Sunny Kankanala, Srini Sundararajan, Stephen W. Rouhana

Mechanical Engineering

In this paper a biomechanical basis for pedestrian protection is presented based on reviews of epidemiological and biomechanical studies conducted over the last three decades. Epidemiological studies reveal the nature and cause of pedestrian crashes and injuries sustained in the field. The various factors that influence pedestrian crashes and fatalities such as pedestrian demographics, time and location of crash, type of vehicles involved and their design characteristics, impact speeds, and nature and severity of injuries sustained are covered in the epidemiology section. The biomechanical studies identify the injury mechanisms and the biomechanical tolerances. Several biomechanical studies that attempt to identify …

Thermomechanical Behavior Of Rotor With Rubbing, Jerzy T. Sawicki, Alberto Montilla-Bravo, Zdzislaw Gosiewski

Mechanical Engineering Faculty Publications

This article presents an analytical study of the dynamics and stability of rotors subjected to rubbing due to contact with seals, taking account of associated thermal effects. The seal interaction force acting on the shaft gives rise to a friction force, which is a source of heating and can induce so-called spiral vibrations. A mathematical model that has been developed couples the heat-conduction equation with the equations for motion of the rotor. Numerical simulations have been conducted that show the thermomechanical behavior of the rotor at various operating conditions. A procedure for analyzing the stability of multibearing rotors based on …

Nebraska Summary 441: Fendt 714 Vario Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 1828: Case Ih Mx 285 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1825: Case Ih Mx 210 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Nebraska Summary S278a: Challenger Mt 455, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 1822: Challenger Mt745 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1821: Challenger Mt735 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1824: Challenger Mt845 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Tests 2078 & 2093: Case Ih Jx 90u Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1826: Case Ih Mx 230 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1831: New Holland Tg 255 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 1832: New Holland Tg 285 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Nebraska Summary S279a: Challenger Mt 465, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary S360a: Challenger Mt 445, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary S326: Mccormick C70 & Cx70 Also Mccormick Cx75, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary S328: Mccormick C90 & Cx90 Also Mccormick Cx95, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary S327: Mccormick C80 & Cx80 Also Mccormick Cx85, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …