Digital Commons Network^™

Nebraska Summary: S529 Case-Ih Jx1080u, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S526 New Holland Tl 100a, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S524 New Holland Tl 80a, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S516 Challenger Mt455b, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S509 Challenger Mt545b, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S506 Challenger Mt535b, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Building A Comprehensive Energy Model For Off-Highway Vehicles With Emphasis On Vehicle Thermal Control Systems, Ayhan Zora

Dissertations and Theses @ UNI

Utilizing machine and thermal system simulations (vehicle energy models) can be very helpful for vehicle manufacturing companies to develop a machine with acceptable component temperatures, less heat loads to the vehicle cooling systems, and reduced emissions that will also reduce overall product development cycle.

Energy models of vehicles were developed mostly in the automotive industry, and most of these studies were based on partial energy models.

The aim of this research study was to create a comprehensive energy model for agricultural machinery, which will be a basis for future work on similar products. A tractor model from a Midwest off-road …

Continuum Modeling Of Cell Membranes, Eveline Baesu, R. E. Rudd, J. Belak, M. Mcelfresh

Department of Engineering Mechanics: Faculty Publications

In this paper, we develop a finite-deformation model for cell membranes with a view toward characterizing the local mechanical response of membranes in atomic force microscope (AFM) experiments. The membrane is modeled as a 2-D fluid continuum endowed with bending resistance. The general theory is used to obtain equations that describe axisymmetric equilibrium states. The membrane is assumed to enclose a fluid medium, which transmits hydrostatic pressure to the membrane, and a point load is applied at the pole to simulate an AFM probe. Both types of loading are associated with a potential and the problem is then cast in …

Computer Programs For Temperature In Fins And Slab Bodies With The Method Of Green’S Functions, Kevin D. Cole

Department of Mechanical and Materials Engineering: Faculty Publications

Heat conduction in fins and slab bodies, a traditional undergraduate topic, is treated with the Green’s function (GF) method. A variety of boundary conditions and heating conditions are included. Computer programs are described which are designed to improve student learning of the GF method. The programs are available from the author.

Experimental Study Of Active Separation Flow Control In A Low Pressure Turbine Blade Cascade Model, Mark Mcquilling

University of Kentucky Master's Theses

The flow field around a low pressure turbine (LPT) blade cascade model with and without flow control is examined using ejector nozzle (EN) and vortex generator jet (VGJ) geometries for separation control. The cascade model consists of 6 Pak-B Pratt andamp; Whitney low pressure turbine blades with Re = 30,000-50,000 at a free-stream turbulence intensity of 0.6%. The EN geometry consists of combined suction and blowing slots near the point of separation. The VGJs consist of a row of holes placed at an angle to the free-stream, and are tested at two locations of 69% and 10.5% of the suction …

Analysis Of Jet-Wing Distributed Propulsion From Thick Wing Trailing Edges, Serhat Hosder, Joseph A. Schetz, Vance Dippold

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Conventional airliners use two to four engines in a Cayley-type arrangement to provide thrust, and the thrust is concentrated right behind the engine. Distributed propulsion is the idea of redistributing the thrust across most, or all, of the wingspan of an aircraft. This can be accomplished by using several large engines and using a duct to spread out the exhaust flow to form a jet-wing or by using many small engines spaced along the span of the wing. Jet-wing distributed propulsion was originally suggested as a way to improve propulsive efficiency. A previous study at Virginia Tech assessed the potential …

Analysis Of Human Thermal Comfort Using A Coupled Model For Predicting Human Body-Environment Heat And Mass Exchange, Ahmed M. Al-Mogbel

Mechanical & Aerospace Engineering Theses & Dissertations

Recent advances in computational fluid dynamics (CFD) make it possible to accurately predict many features of airflow within ventilated spaces. The present study investigates thermal comfort aspects of an occupant in a conditioned space, using a CFD code.

The heat and mass transfer between the human body and the surrounding environment is analyzed by a coupled model that accounts for dispersal of metabolically generated heat in the body to the surroundings by the combined mechanisms of radiation, convection, respiration and evaporation. A two-node model in which two coupled non-linear algebraic equations govern the skin temperature and the body core temperature …

Design Optimization Module For Hierarchical Research And Learning Environment, Oktay Baysal, Mehti Koklu, Ahmed K. Noor

Mechanical & Aerospace Engineering Faculty Publications

The present paper describes a learning module on design optimization courses within a hierarchical research and learning network (HRLN). In this environment a knowledge organization can be created as a hierarchical learning network to link diverse inter- and trans- disciplinary teams from a consortium of universities, industry, government agencies and the providers of learning technologies. It is an approach that builds on computer-based training, intelligent tutoring systems, interactive learning, collaborative-distributed learning, and learning networks. The present design optimization module has been developed and described herein, as a demonstrator of a learning module in this environment. This module allows for the …

Optimal Rate Of Freezing Biological Systems, Sreedhar Thirumala

LSU Master's Theses

This thesis addresses optimization techniques for cryopreservation of biological systems. A part of the thesis (Chapter 2) reports a simplified procedure to predict the optimal rate of freezing biological systems once the cell level parameters are known a priori. The key cell level parameters investigated were, reference permeability of the membrane to water (Lpg), apparent activation energy (ELp), inactive cell volume (Vb), diameter (D), and the ratio of the available surface area for water transport to the initial volume of intracellular water (SA/WV). The simplified procedure was developed by performing a thorough analysis of the water transport model over a …

Towards Automated Capture Of 3d Foot Geometry For Custom Orthoses, Rajeev Madazhy

LSU Master's Theses

This thesis presents a novel method of capturing 3D foot geometry from images for custom shoe insole manufacture. Orthopedic footwear plays an important role as a treatment and prevention of foot conditions associated with diabetes. Through the use of customized shoe insoles, a podiatrist can provide a means to better distribute the pressure around the foot, and can also correct the biomechanics of the foot. Different foot scanners are used to obtain the geometric plantar surface of foot, but are expensive and more generic in nature. The focus of this thesis is to build 3D foot structure from a pair …

A Simplified Thermohydrodynamic Stability Analysis Of The Plain Cylindrical Hydrodynamic Journal Bearings, Sumit Singhal

LSU Master's Theses

A journal bearing is used to support radial loads under high speed operating conditions. In a journal bearing, pressure or hydrodynamic lift is generated in the thin lubricant oil film that separates the shaft and the bushing, thus preventing metal-to-metal contact. Some journal-bearing configurations are susceptible to large-amplitude, lateral vibrations due to a “self-excited instability” known as oil whirl. In order to investigate the effects of lubricant viscosity on oil whirl, a simplified Thermohydrodynamic analysis (THD) analysis of a plain cylindrical journal bearing system has been developed. The “classical” form of the Reynolds equation coupled with simplified, first-order energy equations …

Tissue Interactions With Lasers And Liquid Nitrogen: A Novel Cryopreservation Method, Deepak Kandra

LSU Master's Theses

The importance of the imposed cooling rate in cryopreserving native cells and tissues has been long recognized in the field of cryobiology. When biological tissues are subjected to cooling rates in excess of thousands of degree C per minute, the characteristic structural and physical manifestations of the ice formed are such that the traditional damage due to ice formation at lower cooling rates are suppressed. Hence, achieving high cooling rates in tissues and cells of biologically relevant sizes (mm’s and cm’s) has been a long standing research problem. In the present study, we present a novel technique to achieve high …

Towards Automation Of Forensic Facial Reconstruction, Hemant Narendra Khatod

LSU Master's Theses

Forensic facial reconstruction is a blend of art and science thus computerizing the process leads to numerous solutions. However, complete automation remains a challenge. This research concentrates on automating the first phase of forensic facial reconstruction which is automatic landmark detection by model fitting and extraction of feature points. Detection of landmarks is a challenging task since the skull orientation in a 3D scanned data cloud is generally arbitrary and unknown. To address the issue, well defined skull and mandible models with known geometric structure, features and orientation are (1) aligned and (2) fit to the scanned data. After model …

Numerical And Experimental Investigation Of Transport Processes In Biological Systems, Yimeng He

LSU Master's Theses

This thesis focuses on optimization techniques for transport process during the cryopreservation of biological systems. In the first part of this thesis, a well established shape independent Differential Scanning Calorimeter (DSC) technique was used to measure the dehydration response during freezing of Pacific oyster sperm cells. Volumetric shrinkage during freezing of diploid and tetraploid pacific oyster sperm cell suspensions was obtained at cooling rates of 5 and 20 ˚C/min in the presence of extracellular ice and CPAs. By fitting a model of water transport to the experimentally obtained volumetric shrinkage data the best fit membrane permeability parameters (L_pg and …

Innovative Cooling Configurations For Low Emission Gas Turbine Combustors, Ryan Thomas Hebert

LSU Master's Theses

Presently, effective cooling of modern low NOx combustor liners is achieved through combinations of innovative impingement configurations and other heat transfer enhancement methods. An inherent characteristic of conventional impingement configurations is the occurrence of downstream heat transfer degradation due to increased crossflow effects. In the present study, two different impingement configurations are studied. Both impingement configurations examined in this study aim to increase heat transfer effectiveness by reducing the detrimental effects of spent air crossflow. In Part I, a combination technique wherein impingement is combined with ribs placed in between impingement rows is studied. Three configurations with increased rib placements …

Simulation Of The Communication Process In A Pin Mill, Ambrose J. M. Itika

Tanzania Journal of Engineering and Technology (TJET)

Prediction of the performance of comminution equipment by mathematical models and simulation poses a great challenge to the chemical engineer. This paper describes the simulation of grinding results obtained using an impact mill. Single particle results have been used to generate breakage and selection coefficients that were used for the evaluation of the model. Results have shown that simulation model is in good agreement with the experimental data obtained at a circumferential speed above 60 m/s. At lower speeds, the models shows only partial agreement in the middle particle size ranges. The application of the model is therefore limited for …

Establishing A Quantitative Foundation For Exactly Constrained Design, Alisha M. Hammond

Theses and Dissertations

Exactly constrained (EC) design is a robust design method which can be used for mechanical assemblies. It entails using the minimum number of constraints to eliminate all desired motion.

While found by some engineers in industry to have many benefits (including robust assembly, no binding or play, ease of assembly, and the ability to tolerate the wear of parts), EC designs remain somewhat unrecognized by academia. One reason for this minimal exposure may be the lack of a quantitative foundation for such designs. This thesis describes the history and current background for EC designs, and it also begins to develop …

Computer-Aided Optimal Design Of A Single-Chamber Muffler With Side Inlet/Outlet Under Space Constraints, Long-Jyi Yeh, Ying-Chun Chang, Min-Chie Chiu, Gaung-Jer Lay

Journal of Marine Science and Technology–Taiwan

Whilst the muffler dimension is often limited inside a building or machine room, the consideration of maximal sound transmission loss (STL) under space constraints becomes important and essential to the field of acoustics. In this paper, the optimal design of a singlechamber muffler with side inlet/outlet is comprehensively presented. Both the graphic analysis and the computer-aided numerical assessments are also fully described in this study. With the computer graphic analysis on sensitivity, one set of design data is derived primarily, and the numerical searching algorithm of iteration technique and the initial design data are then carried out. These results are …

The Selection Of Materials For Roller Chains From The Perspective Of Manufacturing Process, Rahmat Saptono

Makara Journal of Technology

The selection of materials for an engineering component is not only requested by its design function and shape, but also the sequence through which it is manufactured. The manufacturing operation of roller chains involves drawing and trimming processes aimed at producing semi-finished chain drives component with a well-standardized dimension. In addition to final combination of properties required by design constraints, the ability of materials to be formed into a desired shape and geometry without failure is also critical. The objective of materials selection should therefore involve additional attributes that are not typically accommodated by the standard procedure of materials selection. …

Application Of Tabu Search Algorithm In Job Shop Scheduling, Betrianis Betrianis, Putu Teguh Aryawan

Makara Journal of Technology

Application of Tabu Search Algorithm in Job Shop Scheduling. Tabu Search is one of local search methods which is used to solve the combinatorial optimization problem. This method aimed is to make the searching process of the best solution in a complex combinatorial optimization problem(np hard), ex : job shop scheduling problem, became more effective, in a less computational time but with no guarantee to optimum solution.In this paper, tabu search is used to solve the job shop scheduling problem consists of 3 (three) cases, which is ordering package of September, October and November with objective of minimizing makespan (Cmax). …

Identification Of The First Limiting Amino Acid In Cooked Polished White Rice Fed To Weanling Holtzman Rats, Mellova Masrizal, J. B. Lamb

Makara Journal of Technology

Forty-eight male weanling rats (91 g) were utilized to study the nutritional adequacy of cooked polished white rice. Rats were individually housed, and allowed ad libitum access to one of six treatment diets. Treatment diets were 1) polished white rice plus 10% casein and 0.18% methionine, CAS, 2) polished white rice, WHR, 3) polished white rice plus 0.45% lysine, LYS, 4) polished white rice plus0.40% methionine, MET, 5) polished white rice plus 0.30% threonine, THR, 6) polished white rice plus 0.45% lysine, 0.40% methionine, and 0.40% threonine, COM. Rice was cooked prior diet formulation using a 3 to 1 ratio …

Dynamic Modeling Of Compliant Constant-Force Compression Mechanisms, Cameron Boyle, Larry L. Howell, Spencer P. Magleby, Mark S. Evans

Faculty Publications

A mathematical dynamic model is derived for compliant, constant-force compression-mechanisms, based on the pseudo-rigid-body model simplification of the device. The compliant constant-force compression mechanism (CFCM) is a slider mechanism incorporating large-deflection beams, which outputs near-constant-force across the range of its designed deflection. The equation of motion is successfully calibrated with empirical data from five separate mechanisms, comprising two basic configurations of CFCMs. The dynamic equation is derived from a generalized pseudo-rigid-body model. This allows every configuration to be represented by the same model, so a separate treatment is not required for each configuration. An unexpected dynamic trait of the constant-force …

Multiple Uav Cooperative Search Under Collision Avoidance And Limited Range Communication Constraints, Randal W. Beard, Timothy W. Mclain

Faculty Publications

This paper focuses on the problem of cooperatively searching, using a team of unmanned air vehicles (UAVs), an area of interest that contains regions of opportunity and regions of potential hazard. The objective of the UAV team is to visit as many opportunities as possible, while avoiding as many hazards as possible. To enable cooperation, the UAVs are constrained to stay within communication range of one another. Collision avoidance is also required. Algorithms for team-optimal and individually-optimal/team-suboptimal solutions are developed and their computational complexity compared. Simulation results demonstrating the feasibility of the cooperative search algorithms are presented.

Modeling The Transient Response Of A Thermosyphon, James Kirk Storey

Theses and Dissertations

Thermosyphon transient operation was numerically modeled. The numerical model presented in this work overcame the limitations of previous studies by including transient conduction in the vessel wall, shear stress between the rising vapor and the falling film in the thermosyphon, the influence of the mass in the liquid pool in the evaporator, and by using a more refined and accurate numerical grid. Unique to this model was the accounting for temporal changes in the effective length of the vapor space due to the expanding and contracting of non-condensable gases in the vapor space. The model assumed quasi-steady one-dimensional vapor flow, …

Comparison Between A Hydraulic Rotary Circuit And A Small Gasoline Engine Based On Speed, Torque, And Horsepower, Erick N. Jeffers

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science and Technology at Morehead State University in partial fulfillment of the requirements for the Degree of Master of Science by Erick N. Jeffers on November 24, 2003.