Digital Commons Network^™

Robust Procedures For Obtaining Assembly Contact State Extremal Configurations, Pan Feng, Joseph M. Schimmels

Mechanical Engineering Faculty Research and Publications

Two important components in the selection of an admittance that facilitates force-guided assembly are the identification of: 1) the set of feasible contact states, and 2) the set of configurations that span each contact state, i.e., the extremal configurations. We present a procedure to automatically generate both sets from CAD models of the assembly parts. In the procedure, all possible combinations of principle contacts are considered when generating hypothesized contact states. The feasibility of each is then evaluated in a genetic algorithm based optimization procedure. The maximum and minimum value of each of the 6 configuration variables spanning each contact …

Gradient-Based Non-Linear Microstructure Design, Brent L. Adams, M. Lyon

Faculty Publications

The support of this research by the Army Research Office is gratefully acknowledged. M. Lyon is supported by a National Science Foundation Graduate Research Fellowship. Fourier analysis is implemented on the orientation distribution of a polycrystalline microstructure. The linearity and convexity of the Fourier space, with respect to orientation, allows one to consider all possible distributions by considering all linear combinations of single-grain orientations. The limits of the Fourier space are therefore defined by the solutions to a set of linear programming problems. A unique approach to the linear programming, similar to the Krylov subspace methods for obtaining solutions to …

Numerical Optimization Of Sound Absorption Systems With Constrained Single-Layer Absorber, Ying-Chun Chang, Long-Jyi Yeh, Min-Chie Chiu, Gaung-Jer Lai

Journal of Marine Science and Technology–Taiwan

The thickness and the attached area of the sound absorber are confined in the practical engineering design while the sound absorber is applied inside the machine room to eliminate the reverberant sound energy. The optimization of the shape of the absorber and the quantification of the exact area of the absorber (in order to meet the required value of sound pressure level (SPL) at the concerned receiving point) becomes essential. For purposes stated above, two powerful gradient techniques with a logical control algorithm are applied during the optimization of the sound absorption system. Both the optimization of shape and the …

2004 (Spring) Ensi Informer Magazine, Morehead State University. Engineering Sciences Department

ENSI Informer Magazine Archive

The ENSI Informer Magazine published in the spring of 2004.

Using Stiffeners For Improved Geometric Fidelity Of Flexible Elements, Ankit Kapoor

Masters Theses

Flexible hoses play an important role in safe operation of a transportation vehicle in automotive and aerospace field. Due to lack of accurate and efficient modeling techniques for such flexible elements with large deformation, most Computer Aided Engineering system do not address the problem in their solution methods.

In this thesis a method is presented to improve the geometric fidelity of flexible element models by using off-axis bi-linear stiffeners (spring) into a discrete linear beam model. Resulting deflection of a hose were compared with the digital scans of an actual deflection of the hose. Though the method is computationally expensive, …

Percolation Paths Of Three-Dimensions In Sensitized Stainless Steel, Alisa Jean Henrie

Theses and Dissertations

The study of three-dimensional percolation paths through materials is important in its contribution to understanding defect sensitive properties of materials. This work shows the importance of grain boundary character in modeling defect sensitive boundaries. Also presented are trends of percolation of sensitized grain boundaries in 304 stainless steel (304SS). Of particular interest is how open paths form in a three-dimensional model created through serial sectioning. Evidence is presented that triple or quadruple points that contain typically two boundaries with special character that intersect the percolation path break up the path. Some grains with no known special qualities (i.e., CSL) have …

A False Acceptance Error Controlling Method For Hyperspherical Classifiers, Chen-Wen Yen, Chieh-Neng Young, Mark L. Nagurka

Mechanical Engineering Faculty Research and Publications

Controlling false acceptance errors is of critical importance in many pattern recognition applications, including signature and speaker verification problems. Toward this goal, this paper presents two post-processing methods to improve the performance of hyperspherical classifiers in rejecting patterns from unknown classes. The first method uses a self-organizational approach to design minimum radius hyperspheres, reducing the redundancy of the class region defined by the hyperspherical classifiers. The second method removes additional redundant class regions from the hyperspheres by using a clustering technique to generate a number of smaller hyperspheres. Simulation and experimental results demonstrate that by removing redundant regions these two …

Unveiling The Crucial Role Of Impact Nergy Loss For So-Called Incompressible Fluid Flow, Jiunn-Shean Chiang, Shu-Hao Chuang, Hsing-Juin Lee

Journal of Marine Science and Technology–Taiwan

Experiments show that pipe flows with large expansion angle and area ratio always accompany with significant amount of energy loss, actually energy loss ratios over 70% of incoming flow kinetic energy are commonplace. It is generally believed that all the energy loss is entirely due to viscous dissipation effect. In this paper, several interesting demonstrations have been given to prove the existence and importance of impact energy loss. Literally, impact energy loss is usually more important than viscous energy loss in many cases. In fact, the pipe expansion flow can be configured as high-speed flow ramming into low-speed flow and …

Effect Of Fullerene Containing Lubricants On Wear Resistance Of Machine Components In Boundary Lubrication, Andriy Titov

Dissertations

Fullerenes, a new form of carbon nanomaterials, possess unique physical and mechanical properties that make their use as additives to liquid lubricants potentially beneficial. The goal of this study was to investigate the effect of fullerene containing lubricants on wear resistance of steel-bronze couples operating under boundary lubrication conditions. A mathematical model of deformed asperity contact was built to calculate real contact area and real contact pressure. Computer controlled wear friction testing methodology and equipment were designed, developed and implemented for obtaining reliable and objective experimental data. In addition, optical and scanning electron microscopy and standard surface texture analysis were …

Migration Of An Intruder Particle In A Boundary Driven Shear Flow, Jian Liu

Dissertations

This study reports on three-dimensional, discrete element simulations of a single large spherical intruder in a Couette shear flow composed of uniform sized particles. The simulation results are useful in providing a numerical reproduction of the experiments for size segregation and mixing. This in turn has a major importance in many industries which are concerned with handling of particles and powders, such as pharmaceutical manufacturing, agriculture, chemical and mineral processing.

Discrete element simulations are carried out using the "soft sphere" model of Walton, et. al., which provides a method for obtaining the information at a macroscopic level from multi-body collisions …

Vibration-Induced Densification Of Granule Materials, Ninghua Zhang

Dissertations

Physical experiments as well as discrete element simulations of vibration are carried out. The use of different amplitudes and frequencies are applied in the experiments to facilitate the observation of densification trends with mono-disperse acrylic spheres and multi-disperse polyethylene pellets. For mono-disperse acrylic spheres, four densification trends are found at different vibration conditions, and attaining the "maximum density" is closely related to the combination of vibration frequency and amplitude, in agreement with experiments in the literature. For multi-disperse polyethylene pellets, there is a substantial increase in solids fraction due to the effects of particle shape and surface friction. Computer simulations …

Magneto-Rheological Fluid Orthosis For Suppressing Tremor, Hyoung-Joo Yeo

Theses

Tremor is a common movement disorder that occurs with specific neurological conditions. This condition may seriously impact daily living activities. The aim of the present study is to evaluate the possibility of the development of a wearable technology that is capable of exerting torques at a user's joints for suppressing tremor.

This thesis is based on the concept of "smart structures" which are made of Magneto-Rheological (MR) fluid that can dynamically alter its viscosity under magnetic field. The wearable tremor suppressing orthosis needs several conditions. It should be safe, light weight, simple and small in structure, and easily attachable. An …

Nebraska Summary: S508 Challenger Mt545b, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Me-Em 2004 Annual Report, Department Of Mechanical Engineering-Engineering Mechanics, Michigan Technological University

Department of Mechanical and Aerospace Engineering Annual Reports

Table of Contents

• Overview
• Mission, Vision, and Strategic Plan
• Enrollment and Expenditure Data
• Faculty & Staff
• Industrial Advisory Committee
• Students
• Academic Programs
• Alumni
• Donations
• Contracts & Grants
• Graduates
• Publications

Engineering Mechanics Department Newsletter -- Winter 2004

Department of Engineering Mechanics: Information

Engineering Mechanics Hosts National Conference
Dzenis Awarded McBroom Professorship
EM Faculty News
EM Faculty Earn College Awards
EM Blackshirts
EM Mourns the Loss of Two Emeriti: Ralph Ekstrom 1923-2003 and Walter Erbach 1919-2003

A Helical Tow Model And Numerical Simulation Of On-Line Thermal Curing Of Thermoset Composites In Filament Winding, Xuefeng Wang, David Y.S. Lou, Negli Zhang`

Department of Mechanical and Materials Engineering: Faculty Publications

A helical tow model of on-line curing of thermoset composites in winding is developed and solved numerically. Actual shape of tow in winding process is considered, and consequently, the modeling of the on-line curing process is more realistic. A numerical grid generation method is developed for the complicated geometry. Transformations of three-dimensional energy equation and its boundary conditions from physical domain to computational domain are performed, which are crucial in numerical grid generation method when an anisotropic medium is involved. A set of concise and regular equations is obtained. The numerical simulation results show that the helical tow model, in …

Performance Of Interface Elements In The Finite Element Method, Kairas Rabadi

Electronic Theses and Dissertations

The objective of this research is to assess the performance of interface elements in the finite element method. Interface elements are implemented in the finite element codes such as MSC.NASTRAN, which is used in this study. Interface elements in MSC.NASTRAN provide a tool to transition between a shell-meshed region to another shell-meshed region as well as from a shell-meshed region to a solid-meshed region. Often, in practice shell elements are layered on shell elements or on solid elements without the use of interface elements. This is potentially inaccurate arising in mismatched degrees of freedom. In the case of a shell-to-shell …

Ground-Source Heat Pumps In Ireland: Heat Transfer Experimentation For The Design And Modelling Of A Sub-Slab Installation., Sarah O'Connell

Theses

Ground-source heat pump technology is currently undergoing rapid growth in Ireland. Three aspects of ground-source heat pumps have been studied in this thesis. The market expansion taking place in Ireland, heat transfer from the soil to the pipe of a ground- source heat pump collector, and the design of an innovative sub-slab ground-source heat pump system.

Initial investigations into the use of ground-source heat pumps in Ireland revealed surprising growth in the use of the technology. There have been approximately 1500 systems installed mainly since 2000. The ground-source heat pump market in Ireland has an estimated annual growth rate of …

The Frequency Distribution Of Quantization Error In Digitizers For Coherent Sampling, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

In this paper the frequency distribution of quantization error in coherent sampling of digitizers will be investigated. As the distribution of the quantization error affects the values of THD and SNR, it is relevant for a correct interpretation of THD and SNR of sine waves in coherent sampling. The distribution of the quantization error will be analyzed as a function of N, total number of samples and M, number of cycles in the sample set and it will be proved that for certain cases, the quantization error falls on odd harmonics only of the frequency of the sampled sine wave.

Developing A Sensing System For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic, Yingtao Jiang, Bingmei Fu, Woosoon Yim

Transmutation Sciences Materials (TRP)

Lead-bismuth eutectic (LBE) is a candidate as a spallation target in sub-critical transmutation systems and as a coolant in nuclear programs. One of the primary concerns with LBE systems is the corrosion of stainless steel, the primary structural material used in nuclear systems. To mitigate this problem, trace levels of oxygen can be introduced into the system, causing the formation of a protective oxide layer at the interface between the LBE and steel. To protect the steel components, this oxide layer must be properly maintained. However, too much oxygen will produce unwanted oxide precipitation within the coolant and elsewhere in …

Nebraska Summary 473: Massey Ferguson 7485 Dynavt Diesel Dyna Step Transmission, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 474: Massey Ferguson 7490 Dynavt Diesel Dyna Step Transmission, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 475: Massey Ferguson 7495 Dynavt Diesel Dyna Step Transmission, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 481: John Deere 6215 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 493: Case-Ih Mxu100 Diesel 12-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 513: Massey Ferguson 5460 Diesel 16-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Test 2121: Case Ih Mxm155 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Nebraska Summary 429: Case Ih Mx M120 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 2119: Case Ih Mxm140 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 2142: New Holland Tm175 Diesel, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.