Digital Commons Network^™

Science For Stewardship: Multidisciplinary Research On Uss Arizona, Matthew A. Russell, Larry E. Murphy, Donald L. Johnson, Timothy J. Foecke, Pamela J. Morris, Raphy Mitchell

Department of Mechanical and Materials Engineering: Faculty Publications

The National Park Service’s Submerged Resources Center and USS Arizona Memorial are conducting and coordinating research directed at understanding the nature and rate of natural processes affecting the deterioration of the USS Arizona in Pearl Harbor, Hawaii. The USS Arizona Preservation Project is designed to be multi-year, interdisciplinary and cumulative, with each element contributing to developing an overall management strategy designed to minimize environmental hazard from fuel oil release and provide the basic research required to make informed management decisions for long-term preservation. The primary project focus is toward acquiring requisite data for understanding the complex corrosion and deterioration processes …

Distal Placement Of An End-To-Side Bypass Graft Anastomosis A 3-D Computational Study, John Robert Di Cicco

Mechanical & Aerospace Engineering Theses & Dissertations

A three-dimensional computational fluid dynamics study of blood flow through stenotic arteries has been conducted. Flow phenomena, such as separation regions and turbulence, can be found distal to an arterial stenosis. Frequently, a bypass graft using an end-to-side technique is attached to a stenotic artery to restore adequate blood flow. However, a significant percentage of these grafts fail after thirty postoperative days due to intimal hyperplasia development around the distal anastomosis. Moreover, aberrant wall shear rates have been implicated as a factor in the development of intimal hyperplasia. Thus, the present study examines whether placement of the distal end of …

Effects Of Initial Seated Position On Whiplash In Low Speed Rear-End Impacts Comparison And Study Using The Tno Rear Impact Dummy (Trid) Model, Manjunath P. Venkataramana

Mechanical & Aerospace Engineering Theses & Dissertations

Despite numerous investigations devoted to its scrutiny, injury causing mechanism associated with rear-end impact collision producing injury such as Whiplash Associated Disorder (WAD) has remained a mystery. Several criteria have been proposed to predict the injury causing mechanism, but none have been universally accepted. The challenge lies in determining a set of testing procedures representative of real-world collisions, wherein the results obtained are not only the same as human testing, but remain consistent with various subjects and impact conditions. It is hypothesized that one of the most important considerations is the effect of initial seated position (ISP).

This thesis can …

Developing A Sensing System For The Measurement Of Oxygen Concentration In Liquid Pb-Bi Eutectic: Quarterly Progress Report (July 1 – Sept. 30, 2004), Yingtao Jiang, Bingmei Fu

Transmutation Sciences Materials (TRP)

Dr. Jiang Ma and Mr. Xiaolong Wu worked in LANL between July 1 and Sept. 15 to conduct the experiment. Test of the corrosion of different materials in LBE was performed. The influence of the process of gas introduction to the LBE was studied. Data analysis work was performed based on accumulated data. In the same time, progress has been made in the simulation for transport in oxygen mixing, and one paper was presented in a conference. Another paper was composed and submitted to IEEE International Symposium of Circuits and Systems for the track Chemical Sensors. Preparation of a paper …

Solvent And Method For Extraction Of Triglyceride Rich Oil, Shubhender Kapila, Paul Ki-Souk Nam, V. J. Flanigan

Chemistry Faculty Research & Creative Works

The present invention relates to a solvent for use in extracting oil from an oil bearing material, such as soybeans, with the solvent resulting in the selective extraction of a triglyceride rich oil, which contains 95% or greater triglycerides and non-polar constituents, with the solvent comprised of a hydrocarbon, preferably hexane, and a fluorocarbon, so that the solvent has a viscosity less than 2.6 centipoise and a polarity of less than 0.1. The present invention also relates to a method of using the solvent to extract the triglyceride rich oil, with the method including preferably extracting the oil at a …

The Benefit Of Using Simulation To Improve The Implementation Of Lean Manufacturing Case Study: Quick Changeovers To Allow Level Loading Of The Assembly Line, Jack J. Mcclellan

Theses and Dissertations

In today's competitive manufacturing environment, companies are constantly looking for ways to improve. Because of this, many companies are striving to become "lean" by implementing lean manufacturing, which is a difficult process. To aid in the implementation of lean manufacturing, simulation was used to reduce the trial-and-error period of lean manufacturing and find to optimum approach to implement the lean manufacturing principle. In this research, a case study of implementing level loading of the production schedule for BullFrog International, L.C. will be examined. To make it possible to implement level loading, the thermo-former machine at the beginning of the operations …

A Review Of Setup Practices And Procedures For Creating Ieee 802.11 Wireless Community Networks, Jae M. Theobald

Theses and Dissertations

IEEE 802.11 wireless networking equipment has made it possible to bridge the last mile for new broadband internet service providers. Inexpensive wireless networking equipment and high gain antennas enable high speed internet delivery at a fraction of the cost of installing or upgrading land lines for cable or DSL services. Based on this research, a guide of general practices and procedures is proposed for designing, installing, and maintaining a reliable wireless community area network. Included tests have provided performance results for several types of wireless antennas (including wire grid parabolic dishes, Yagi and Vagi styles, and echo backfire), wireless bridges, …

Numerical Simulations In Electro-Osmotic Flow, Joseph S. Tenny

Theses and Dissertations

The developing flow field in a parallel plate microchannel, induced by wall motion, has been modeled numerically. This type of flow simulates the physical driving mechanism that exists in electro-osmotically generated flow with large channel diameter-to-Debye length ratios (Z). The physics of the flow field were compared between the moving wall model (MWM) and electro-osmotic flow (EOF) at Reynolds numbers of 1 and 1800, and Z > 2500. Also, Z-values between 50 and 500 were studied to investigate the accuracy of the MWM. Results show that for Z-values greater than 100 the MWM shows good agreement with EOF.

The dynamics of …

A Tightly-Coupled Ins/Gps Integration Using A Mems Imu, Jonathan M. Neu

Theses and Dissertations

Micro-Electro-Mechanical Systems (MEMS) technology holds great promise for future navigation systems because of the reduced size and cost of MEMS inertial sensors relative to conventional devices. Current MEMS devices are much less accurate than standard inertial sensors, but they can still be useful. In this thesis, data was recorded from an inexpensive MEMS inertial measurement unit and integrated with GPS measurements using a tightly-coupled Kalman filter. The overall goal of this research is to investigate the usefulness of MEMS sensors for a small, real-time, low-cost INS/GPS integration. A golf cart was used to collect dynamic data, along with a commercial …

Numerical Modeling For Atomization Of Coaxial Liquid/Gas Jets, Stephen Gen-Ken Chuech, Andrzej J. Przekwas, Chih-Yuan Wang

Journal of Marine Science and Technology–Taiwan

In the present study, the atomization of a coaxial injector in the liquid/gas engine combustor was numerically investigated. Based on the wave instability analysis of the interface between liquid and gas, an atomization model for the high-speed liquid jets was established by coupling with the jet flow solutions. First, the wave instability was analyzed to predict the growth rates along the liquid jet surface by numerically solving the wave dispersion equation, while the governing equations of the liquid flow were solved for the formation of the liquid jet core and the variation of the liquid flow structure. Then, these two …

Modeling Of The Metal Powder Flow With Carrier Gas In Coaxial Nozzle For Direct Laser Deposition Process, Heng Pan, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In direct laser deposition process, metal powder is directly fed with carrier gas through the coaxial nozzle into the melt pool created by the laser to form the solid parts. Many operational parameters of the process depend on the characteristic of the powder stream structure below the exit of the coaxial nozzle. In this paper, a computational approach is developed for the simulation of the gas-particle flow in the coaxial nozzle. By taking into account the nozzle geometry and operating parameters, such as width and inclination angle of powder passage and carrier gas velocity, the developed computational code allows the …

Wavelenght-Dispersive X-Ray Flourescence Accuration, H. Widyatmoko

Makara Journal of Technology

Wavelenght–Dispersive X-Ray Flourescence Accuration. X-Fuorescence spectrometry is a method, which is increasingly applied in the geochemical analysis. X-Fuorescence spectrometry is classified under two categories – WDXRF (wavelenght – dispersive X-ray fluorescence spectrometer) and EDXRF (energy-dispersive X – ray fluorescence spectrometer). WDXRF can be configured as a sequential spectrometer , a simultaneous spectrometer or a hibrid instrument, which combines the advantages of the simultaneous and sequential spectrometers into one instrument. Each instrument is different in some characteristics, and each has applications for which it is specifically suited. In this investigation sequential spectrometer PW 1450 was used to analyze the major, minor …

Admittance Selection For Force-Guided Assembly Of Polyhedral Parts In Single-Point Contact, Shuguang Huang, Joseph M. Schimmels

Mechanical Engineering Faculty Research and Publications

The selection of the proper admittance is important in achieving force-guided assembly. This paper identifies procedures for selecting the appropriate spatial admittance to achieve reliable force-guided assembly of polyhedral parts for single-point frictionless contact cases. Sets of conditions that are imposed on the admittance matrix for different types of single-point contact are presented. These conditions ensure that the motion that results from contact reduces part misalignment in the selected contact state. We show that, for bounded misalignments, if an admittance satisfies the misalignment-reduction conditions at a finite number of contact configurations, then the admittance also satisfy the conditions at all …

Field Effect Control Of Electrokinetic Transport Phenomena In Nanofluidics, Song Xue

Mechanical & Aerospace Engineering Theses & Dissertations

Naturally nanofluidics has applications demanding the samples to be handled in exceedingly small quantities due to the small size of the fluidic channels in nanofluidic devices, such as characterization of single biomolecules. Fluids confined in channels of nanometer characteristic dimensions exhibit physical behaviors not observed in large conduits. Charge properties of the nanochannel wall in contact with an aqueous solution play essential roles in the involved electrokinetic transport phenomena occurring in nanofluidic devices. In addition to tuning the charge properties of the nanofluidic channel wall by adjusting the solution properties such as pH and background salt concentration, field effect transistor …

Uncertainty Propagation And Robust Design In Cfd Using Sensitivity Derivatives, Michele M. Putko

Mechanical & Aerospace Engineering Theses & Dissertations

This study investigates and demonstrates a methodology for uncertainty propagation and robust design in Computational Fluid Dynamics (CFD). Efficient calculation of both first- and second-order sensitivity derivatives is requisite in the proposed methodology. In this study, first- and second-order sensitivity derivatives of code output with respect to code input are obtained through an efficient incremental iterative approach.

An approximate statistical moment method for uncertainty propagation is first demonstrated on a quasi one-dimensional (1-D) Euler CFD code. This method is then extended to a two-dimensional (2-D) subsonic inviscid model airfoil problem. In each application, given statistically independent, random, normally distributed input …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

A Genetic Algorithm Approach For Model Reference Adaptive Control Of Ionic Polymer Metal Composites, Brijesh C. Lavu, Marco P. Schoen, Ajay Mahajan

Mechanical Engineering Faculty Research

Electroactive polymers undergo physical deformation to external voltage stimuli. These electrically activated polymers possess extraordinary features making them capable as lightweight sensors and actuators in manifold applications. The characteristics of applied voltage and environmental conditions, especially the moisture content surrounding the polymer, have a combined influence on the dynamical behavior of these polymers. In order to characterize these polymers under varying environmental conditions, this paper discusses the experimental procedure and modeling techniques used to derive a representative model. Ionic polymer metal composite polymers are used for this humidity relative electrodynamical study. Insight on the numerous applications of electroactive polymers as …

Experimental And Numerical Investigation Of Turbulent Flow Induced Pipe Vibration In Fully Developed Flow, Matthew T. Pittard, R. Daniel Maynes, Jonathan D. Blotter, Robert P. Evans

Faculty Publications

Flow-induced pipe vibration caused by fully developed pipe flow has been observed but not fully investigated when turbulent flow prevails. This article presents experimental results that indicate a strong correlation between the volume flow rate and a measure of the pipe vibration. In this work, the standard deviation of the frequency-averaged time-series signal, measured using an accelerometer attached to the pipe, is used as the measure of pipe vibration. A numerical, fluid-structure interaction (FSI) model used to investigate the relationship between pipe wall vibration and the physical characteristics of turbulent flow is also presented. This numerical FSI approach, unlike commercial …

Development Of A Multidisciplinary Engineering Foundation Spiral, Samuel Bogan Daniels, Bouzid Aliane, Jean Nocito-Gobel, Michael Collura

Engineering and Applied Science Education Faculty Publications

To operate effectively in today’s workforce engineers need to have a muti-disciplinary perspective along with substantial disciplinary depth. This broad perspective cannot be achieved by merely taking 2 or 3 engineering courses outside of the major, but rather will require a radical change in the way we educate engineers. The faculty of the School of Engineering and Applied Science at the University of New Haven have developed a new approach: the Multidisciplinary Engineering Foundation Spiral. This curricular model provides the needed mix of breadth and depth, along with the desired professional skills, by providing carefully crafted, well-coordinated curricular experiences in …

Project-Based Introduction To Engineering -- Course Assessment, Samuel Bogan Daniels, Michael Collura, Bouzid Aliane, Jean Nocito-Gobel

Engineering and Applied Science Education Faculty Publications

The School of Engineering and Applied Science at the University of New Haven has a newly developed project-based Introduction to Engineering course. This new course plays a central role in the new Multi-Disciplinary Engineering Foundation Spiral curriculum as the first semester course for all engineering freshmen. An assessment process was developed to determine the effectiveness of this project-based course, specifically with attention towards assessing attitudes, impact on retention, problem-solving and engineering foundation topics. This paper addresses the particular portion of the assessment process for the individual course projects and their contribution to the last two assessment categories.

Project-Based Introduction To Engineering - A University Core Course, Samuel Bogan Daniels, Bouzid Aliane, Jean Nocito-Gobel, Michael Collura

Engineering and Applied Science Education Faculty Publications

This paper describes a first year engineering course that is taken by both engineering and non-engineering students. The project-based Introduction to Engineering course, EAS107P, fulfills a university core curriculum elective. Although engineering students take the course during their first year, students from other majors typically elect to take the course later in their curriculum. The focus of EAS107P is to have students experience the engineering design and problem solving process in a multi-disciplinary, team-based setting. In addition to learning about design, students develop an interest in the engineering profession and build a foundation of skills for future work. An additional …

Project Planning & Development For Engineering Freshmen, Bouzid Aliane, Michael Collura, Samuel Bogan Daniels, Jean Nocito-Gobel

Engineering and Applied Science Education Faculty Publications

The nature and background of students seeking an engineering education has changed drastically in the last decade, as has the expectations of industrial employers. Many students lack the organizational skills needed for academic success. Similar organizational skills, although more advanced, are required for managing engineering projects. A new course was developed by the faculty at the School of Engineering and Applied Science at the University of New Haven. Through this course, a key component of the Multidisciplinary Engineering Foundation Spiral, seeks to promote higher retention rates, increase student motivation and begin a confidence-building transition to professional practice. Project management concepts …

Application Of Genetic Algorithm To The Shape Optimization Of A Constrained Double-Chamber Muffler With Extended Tubes, Long-Jyi Yeh, Ying-Chun Chang, Min-Chie Chiu

Journal of Marine Science and Technology–Taiwan

As the compact design of a muffler system within a constrained environment of a existing machine room becomes obligatory, it also becomes essential to maximize the acoustic performance of mufflers under space constraints. In this paper, the shape optimization of a double-chamber muffler with an extended tube is presented. The main characteristic of the solution methodology is the use of genetic algorithm (GA) as the optimizer. In the paper, the acoustic performance of sound transmission loss (STL) derived by transfer matrix is conjugated with the techniques of GA searching. A numerical case of noise elimination in full band noise is …

Analysis Of The Cup Drawing Process And Optimization Of The Blank Holder Force, Hossam Gharib

Archived Theses and Dissertations

The process of deep drawing of a cylindrical cup is analyzed and optimized for the minimum punch force. An analytical model is developed for the cup drawing process by determining the variation of stresses and strains over the deforming sheet at any stage of deformation until a full cup is formed. The model uses finite difference approach and numerical analysis to solve for equilibrium, continuity, and plasticity equations. Then, optimization of the blank holder force (BHF) is carried out using the developed analytical model. Optimization is carried out using genetic algorithms to determine the optimum linear BHF scheme that minimizes …

Agile Manufacturing System Scheduling Using Genetic Algorithms And Simulated Annealing, Sherif Masoud

Archived Theses and Dissertations

Agile manufacturing is concerned with thriving in prevailing market conditions by quickly introducing new or modified products. This research deals with the scheduling of an agile manufacturing system (AMS), which performs both machining and assembly, with the objective of minimizing the makespan. The AMS allows the production of high varieties of modular products in small batches and at low costs. This problem is difficult to solve optimally and was solved in literature by heuristic algorithms. In the current research, four novel, genetic algorithms and simulated annealing-based, heuristics – General Genetic Algorithm, General Simulated Annealing, Heuristic Assisted Genetic Algorithm, and Heuristic …

The Design Of Adjustable Spherical Mechanisms Using Plane-To-Sphere And Sphere-To-Plane Projections, Wen-Tzong Lee

Dissertations

The spherical mechanism is a particular type of spatial mechanism. Due to the orientation of its joint axes and the curvature of its links, the workspaces of spherical mechanisms (whether line segments, closed loops or area regions) are spherical in curvature. This characteristic of spherical mechanisms makes them quite effective and practical in motion path and function generation applications requiring spherical rigid body kinematics.

Although there are design methods available for spherical mechanisms, most of these methods do not consider the design of a single adjustable spherical mechanism. With an adjustable spherical mechanism, the user could for example, relocate the …

Nebraska Summary S466: Massey Ferguson 6480 Diesel 32-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Design And Simulation Of An Induction Skull Melting System, Taide Tan

UNLV Theses, Dissertations, Professional Papers, and Capstones

Incorporating volatile actinides, mainly americium into a metallic fuel pin (MFP) has been a serious problem due to americium’s high vapor pressure. An Induction Skull Melting (ISM) system was identified by Argonne National Laboratory (ANL) as a potential furnace design to cast MFPs. Through the development of the ISM system, the nuclear waste feedstock can be melted and injected into the mold for fabricating MFPs in the advanced nuclear fuel cycles. The main phenomena in this system include: induction melting process, casting process and mass transfer process of americium. Issues related to ISM system design for casting MFPs are discussed …

Use Of Positron Annihilation Spectroscopy For Stress-Strain Measurements, Ajit K. Roy

Transmutation Sciences Materials (TRP)

The purpose of this collaborative research project involving the University of Nevada Las Vegas (UNLV) and Idaho State University (ISU) is to evaluate the feasibility of determining residual stresses of welded, bent (three-point-bend), and cold-worked engineering materials using a new nondestructive technique based on positron annihilation spectroscopy (PAS). The proposed technique is to use γ-rays from a small MeV electron linear accelerator (Linac) to generate positrons inside the test sample via 2 pair production. This method can be used for materials characterization and investigation of defects in thick samples that usually cannot be accomplished by conventional positron technique or other …

Numerical Modeling Of Friction Stir Welding: A Comparison Of Alegra And Forge3, Alma H. Oliphant

Theses and Dissertations

The objective of this research was to evaluate the capabilities of ALEGRA, a Sandia National Labs hydrocode, and Forge3, a Transvalor S.A. product, to accurately model the Friction Stir Welding Process. ALEGRA and Forge3 are discussed in light of the inherent challenges of modeling Friction Stir Welding, and a rotational boundary condition is added to ALEGRA. Results are presented from Friction Stir Welding modeling outputs from both ALEGRA and Forge3. ALEGRA is shown to be incapable of modeling the Friction Stir Welding process, in large part due to its focus on shock propagation, which causes extremely small time steps. Forge3 …