Digital Commons Network^™

Synthesis And Biomedical Applications Of Functional Polymers, Jianxun Ding, Di Li, Jingxiao Chen, Chao Zhao, Parisa Pour Shahid Saeed Abadi

Michigan Tech Publications, Part 1

No abstract provided.

A Single Cell Pair Mechanical Interrogation Platform To Study Cell–Cell Adhesion Mechanics, Amir Monemianesfahani

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Cell-cell adhesion complexes are macromolecular adhesive organelles that integrate cells into tissues. Perturbations of the cell-cell adhesion structure or relatedmechanotransduction pathways lead to pathological conditions such as skin and heart diseases, arthritis, and cancer. Mechanical stretching has been used to stimulate the mechanotransduction process originating from the cell-cell adhesion and cell-extracellular matrix (ECM) complexes. The current techniques, however, have limitations on their ability to measure the cell-cell adhesion force directly and quantitatively. These methods use a monolayer of cells, which makes it impossible to quantify the forces within a single cell-cell adhesion complex. Other methods using single cells or cell …

Geometrically Complex Planar Heat Exchangers, Derli Dias Do Amaral Junior, Jose Lage

Mechanical Engineering Research Theses and Dissertations

In this study, geometrically complex planar heat exchangers, designed in line with the Constructal Law and operating at steady-state, are investigated numerically. The work is divided into two parts, one focusing on diffusion heat transfer in a rectangular plane and another on conjugate diffusion-convection heat transfer in a circular plane heat exchanger.

In the first part, a heat generating rectangular solid volume made of a low conductivity material is cooled through a small, isothermal side-section of the domain. The diffusion cooling process is improved by distributing within the heat generating material a fixed amount of a high conductivity material. The …

Forced Convection Film Condensation Of Downward-Flowing Vapor On Horizontal Tube With Wall Suction Effect, Tong-Bou Chang, Fu-Jen Wang

Journal of Marine Science and Technology–Taiwan

The heat transfer performance of the condensate layer formed by a downward-flowing, dry saturated vapor flowing over an isothermal horizontal tube with wall suction effects is examined. Under the effects of wall suction, the gravity force, the potential flow pressure gradient, and the interfacial shear stress, the local/mean Nusselt numbers of the condensate film are obtained as a function of the Jakob number Ja, the Prandtl number Pr, the Rayleigh number Ra, the two-phase mean Reynolds number Rev, the dimensionless pressure gradient parameter P, and the suction parameter Sw. The results show that the mean Nusselt number increases with increasing …

An Examination Of The Influence Of Distillation On The Combustion Behavior Of Apparently Equivalent Surrogate Fuels, Jay A. Lefkowitz

Theses and Dissertations

Use of surrogates to emulate the combustion behaviors of prevaporized real fuels has been widely demonstrated in the literature. However, many combustion applications utilize atomized fuel sprays, and for these configurations, the assumption of fuel property homogeneity in prevaporized fuel combustion is tenuous. This work uses a simplified distilling droplet model to demonstrate a real potential for vaporization-coupled deviations from the single-valued combustion property targets used to characterize prevaporized combustion behaviors. To verify the model-based observations, flame blowout measurements from a custom-built annular spray burner rig are measured. Sets of essentially equivalent prevaporized jet fuel and gasoline surrogates suggested in …

An Engineer's Guide To Periodic Discrete Wavelet Transforms And The Periodic Wavelet Balance Method, Simon Jones

Faculty Publications - Mechanical Engineering

This Technical Report aims to explain how to apply the discreteWavelet Balance Method (dWBM) for solving periodic differential equations using periodized Daubechies wavelets. The primary goal is to provide the user sufficient details to implement the technique without extensive mathematical background.

Chapter 2 of this document reviews the discrete Fourier transform using a multivariate regression approach, followed by a review of the discrete Harmonic Balance Method (dHBM) for approximating solutions to periodic differential equations. It is important the reader complete this chapter, even if they are familiar with the topics, since the approaches demonstrated in Chapter 2 with harmonic functions …

Effect Of Thermal Conductivity, Reynolds Number, Aspect Ratio And Packing Arrangement On Radial Heat Transfer In Packed Beds, Nishith Gorla

Mechanical and Aerospace Engineering Dissertations - Archive

The key motivation for this research is to study heat transfer developments in packed beds. The radial heat transfer enhancement of a packed bed in the laminar flow region is one of the major areas of ongoing research in mechanical, aerospace and chemical industries, especially the response of a packed bed during conjugate heat transfer with the fluid-solid interaction. This computational study focuses on the impact of packing size, thermal conductivity, and arrangement on the radial heat transfer performance as a function of Reynolds number. A simple annular tube packed with circles (2D) and spheres (3D) is utilized for this …

Modeling The Effect Of In Situ Nozzle-Integrated Compression Rolling On The Mechanical And Fracture Behavior Of Fused Filament Fabrication (Fff) 3d Printed Parts, Momen Mohammad Qasaimeh

Mechanical and Aerospace Engineering Dissertations - Archive

Fused filament fabrication (FFF) is one of the most common additive manufacturing/3D printing techniques where continuously extruded semi-molten filaments are deposited in a layer-by-layer manner. The quality of the manufactured part depends on some major factors such as filament-filament contact and adhesion as well as the void fraction. Filament to filament adhesion affects the part strength under transverse load. In our earlier work, we studied the effect of in situ ball rolling on the thermal and mechanical properties of the printed parts. It was found that when printing/rolling parameters are correctly tuned and in situ compression rolling is appropriately applied …

Set-Theoretic Frameworks For Online Optimization, Estimation, And Control, Dignata Bhattacharjee

Mechanical and Aerospace Engineering Dissertations - Archive

This research is primarily focused on developing online frameworks, which are suited to real-time implementation, for performance optimization, estimation, and control of dynamical systems using set-theoretic concepts and/or having set-theoretic interpretations. First, two perturbation-based extremum seeking control schemes, based on the classical setup and equipped with novel adaptation laws for the perturbation signal amplitudes, are proposed for general single input single output nonlinear systems. The proposed schemes are able to extremize steady-state system output in a practical asymptotic sense, i.e., the system is driven to an arbitrarily small set centered at the true steady-state optimal operating point. The next development …

Uncertainty Propagation, Control, And Estimation Of Stochastic Dynamic Systems Using Generalized Polynomial Chaos Expansion, Rajnish Bhusal

Mechanical and Aerospace Engineering Dissertations - Archive

In recent years, uncertainty propagation has emerged as an important research area in the field of dynamical systems. The growing interest in this area arises out of the need to develop computationally efficient approaches to predict the evolution of a system subject to uncertainties. To this end, this dissertation is focused on developing computational frameworks for uncertainty propagation, control, and state estimation of stochastic dynamical systems using the generalized polynomial chaos (gPC) expansion technique. In the first part of this dissertation, the construction of gPC expansion is presented in general. The novelty of this dissertation lies in developing a mixed …

Laminar Swept And Cross Shockwave/Boundary-Layer Interactions, Jiss Jacob Sebastian

Mechanical and Aerospace Engineering Dissertations - Archive

Shockwave/boundary-layer interactions are considered one of the most complex problems in high-speed gas dynamics, and numerous studies have been carried out for more than eighty years to understand the fundamental physics. A numerical study was performed using fin-plate configurations to study the three-dimensional swept and cross shockwave/ laminar boundary-layer interactions. All the interactions studied were strong enough for the boundary layer to separate. In the first part, swept shock interactions between a laminar boundary layer and the shockwave induced by a sharp fin mounted perpendicularly on a flat plate were studied. Different flow conditions were investigated at freestream Mach numbers …

Haptic Interface Optimization For Virtual Anastomosis Surgery Training, Kangji Huang

Mechanical and Aerospace Engineering Theses - Archive

Virtual anastomosis surgery study allows surgeons to perform or practice suturing in virtual reality using a commercial haptic device. The haptic device can generate force feedback so that the user can feel the real touch sensation of the object in virtual reality. The virtual anastomosis surgery study has two requirements which are that the haptic device must be fixed on the operating table and haptic device location must be suitable for different surgeons. The goal is to use a commercially available haptic device for this purpose, rather than design a new device for each possible surgery that must be performed. …

Characterization And Enhancement Of Mechanical Properties In Thermoplastic Fff Parts Using In-Situ Annealing, Rhugdhrivya Rane

Mechanical and Aerospace Engineering Dissertations - Archive

Fused filament fabrication is one of the most common and widely used additive manufacturing techniques. Owing to its ease of use, availability and cheap feedstock it provides a significant advantage over other AM techniques. But these advantages are overshadowed by the fact that FFF parts show high anisotropy and reduced mechanical properties as compared to conventional manufacturing techniques. Literature review of previous research works show multiple approaches to enhance the mechanical properties of FFF parts but each of these techniques have limitations to either the geometries that can be printed or involve complex expensive setups. In one such technique a …

Shape Modeling, Attitude Estimation, And Classification Of Artificial Resident Space Objects (Rso) Using Photometric Light Curves, Katiyayni Balachandran

Mechanical and Aerospace Engineering Dissertations - Archive

Light curve inversion (LCI) has proven valuable in using photometric measurements to optimize various physical parameters of a resident space object (RSO) such as rotational period about its own spin axis, pole orientation and others. Other characteristics such as shape and size are dependent on the surface brightness. To accurately determine size, shape, spin rate, or attitude information of an unresolved resident space object, photometry is required to capture the relatively rapid changes in brightness that these objects can exhibit. LCI has been developed significantly for asteroids, although not fool-proof for artificial RSOs. Satellites and space debris, unlike asteroids, are …

Theoretical And Experimental Analysis And Optimization Of Thermal Conduction In Electrochemical And Latent Heat Energy Storage Systems, Amirhossein Mostafavi

Mechanical and Aerospace Engineering Dissertations - Archive

Phase change materials (PCMs) are used commonly for energy storage purposes. Thermal energy can be stored in a PCM with a variety of configurations such as PCM slabs, cartesian and cylindrical finned systems. Heat transfer in PCM storage systems can be from a heat transfer fluid (HTF) or a heat source at constant temperature to adjacent PCM. The rate of heat transfer is limited by thermal properties. Fin insertion can improve the heat transfer inside the PCM. Chapters 2 and 3 derive and solve the governing energy equations to determine the transient temperature distribution in the PCM due to the …

Rotor Performance Model (Rpm), Chadwick Scott Balfantz

Mechanical and Aerospace Engineering Theses - Archive

Rotorcraft performance modeling is of high interest with multiple industry codes in existence, many of which are high-fidelity and are comprehensive in the analyses that are achievable. Along with the high-fidelity and the comprehensive nature of the industry codes comes an equally high level of complexity in the inputs required to extract meaningful results. The ever-increasing fidelity in the existing codes creates a need for an analysis code that is built to be highly flexible, designed from the top down and implemented from the bottom up in a structured format. The Rotor Performance Model (RPM) was developed to provide high-fidelity …

Nonlinear Model Development And Validation For Ball And Plate Control System, Zachary Richter

Master's Theses

Ball and plate balancing control systems are commonly studied due to the complex dynamics associated with the instability of the system in open-loop. For simplicity, mathematical models describing the ball and plate dynamics are often linearized and the effects of complex motion are assumed to be negligible. These assumptions are rarely backed with evidence or explanations validating the simplified form of the dynamical equations of motion. This thesis focuses on developing a nonlinear model that more accurately defines the dynamics of the system, in order to quantify the error of linear and nonlinear models when compared to a Simscape physical …

Two-Dimensional Modeling Of Nonlinear Dynamics Of Forcespinning Jet Formation, Dumitru I. Caruntu, Simon Padron, Karen Lozano

Mechanical Engineering Faculty Publications

Forcespinning is a novel method that makes use of centrifugal forces to produce nanofibers rapidly and at high yields. To improve and enhance the forcespinning production method, a 2D computational forcespinning inviscid fluid dynamics model is developed. Two models, namely, time-independent and time-dependent, are obtained in order to investigate the effects of various parameters on fiber forcespinning formation (trajectory, jet diameter, tangential velocity). The fluid dynamics equations are solved using the method of multiple scales along with the finite difference method and including slender-jet theory assumptions. It is important to produce jets with small diameters in the micro- and nanorange. …

Towards Real-Time Energy Efficiency Analysis Of A Hydraulic System, Montasir Mamun Mithu

Masters Theses

The study aims at developing a real-time data analysis system for the energy efficiency study of hydraulic systems. It also aims at implementing automation for hydraulic systems so that energy efficiency can be improved using the real-time approach. This research uses a system-level experimental methodology. A linear push system hydraulic prototype is developed for the study. The prototype contains hydraulic actuator, shock absorber, electronic flow control valve, and electronic sensor. This prototype is used to experiment with different operating conditions to characterize hydraulic system behavior. A real-time data analysis system is developed using LabVIEW and an Open Platform Communication (OPC) …

Development Of Injection Molding Pressure Monitoring System Using Piezoelectric Sensor, Mostafa Meraj Pasha

Theses and Dissertations

Injection molding is one of the most popular techniques for global plastic production. With this automation technique, the plastic product can be manufactured at a low cost with a complex geometrical shape. A manufacturing process with the high productivity of an injection molding machine depends on molding pressure and temperature inside the mold cavity. In this research, an experimental work is performed to determine a process monitoring system using asynchronous data acquisition, through the incorporation of wired piezo-ceramic sensor to acquire pressure of injection molding system. This piezoelectric sensor is designed in such a way that, a Bluetooth device can …

Bioprinting A 3d Tubular Structure With Vascular Smooth Muscle Cells To Observe The Process Compatibility, Taieba Tuba Rahman

Theses and Dissertations

Printability is the ability to print a reproducible structure using the bioprinting technique. Constructing the relationships between printability and printing parameters of the extrusion printing process is difficult because of the presence of too many independent and inter-correlated factors. For this reason, it is necessary to identify and limit the number of significantly influential factors. In addition, Scaffold based blood vessel fabrication is a key challenge in 3D Bioprinting. As vascular smooth muscle cell (VSMCs) is a major component of blood vessels, the investigation of the behavior and orientation of VSMCs after printing is required to better understand the 3D …

Using Single-Molecule Dna Flow-Stretching Experiments To See The Effects Of Temperature And Viscosity, Fatema Tuz Zohra

Theses and Dissertations

Deoxyribonucleic acid (DNA) is a highly charged long and semi-flexible polymer of which length is much longer than cell dimensions at least by 1,000-folds. A long linear DNA turns into a crumpled structure to fit into a tiny cell volume by the process known as DNA compaction. In nature, DNA fits into the volume of the cell using DNA compaction by packaging genome material. Various types of protein are involved in DNA compaction. To experiment with various proteins as DNA compaction agents, DNA needs to be stretched out. In our thesis, the effect of temperature and buffer viscosity on DNA …

Machinability Of Carbon Fiber Reinforced Polymer (Cfrp) Composites: Modeling And Optimization Using Taguchi Analysis And Multi-Objective Genetic Algorithm, S M Abdur Rob

Theses and Dissertations

Carbon Fiber Reinforced Polymer (CFRP) composites have been widely used in aerospace, automotive, nuclear, and biomedical industries due to their high strength to weight ratio, corrosion resistant durability and excellent thermo-mechanical properties in non-oxidative atmospheres. Machining of CFRP composites has always been a challenge for the manufacturers. In this study, turning operation has been performed on CFRP composites to investigate the effects of cutting parameters namely cutting speed, feed rate and depth of cut on the output characteristics including cutting force, surface roughness and tool wear using Taguchi Analysis. Regression Analysis has been used to develop mathematical model for cutting …

Electrical Characterization Of Phytoplankton Suspensions Using Impedance Spectroscopy., Margaret R Jett

Electronic Theses and Dissertations

Phytoplankton are closely monitored because of their important environmental role, and the impacts they have on their local ecosystems. Some phytoplankton respond to stress by producing lipids, which can be harvested for biofuels and other chemicals. Microfluidic devices have been important in improving the portability and throughput of phytoplankton characterization methods, increasing their potential for in situ use. This study utilized a small sample of phytoplankton suspended in a stagnant medium and measured the impedance response using a lab-on-chip and impedance analyzer. The individual cell characteristics were derived from the impedance response of the group. The goal was to characterize …

Assessment Of The Impacts Of Climate Variability On Hydropower Generation: A Case Study Of The New Pangani Falls, Tanzania, Dativa Byarufu

Tanzania Journal of Engineering and Technology (TJET)

Climate change poses potential impacts on hydropower generation either positively by increasing or negatively by decreasing river flow. This study assessed the impacts of climate variability on hydropower with a focus on the New Pangani Falls in Tanzania. Rainfall and temperature time series data from 1980-2014 were analyzed in relation to river discharge and associated impacts to hydropower generation. The Man-Kendall test was used to detect trend in both annual and seasonal time series. The results showed a negative trend in annual rainfall with Z= -2.41 at α = 0.05 and the slope Q = -0.964. Seasonal trend analysis showed …

Socio-Technical Perspective For Electronic Tax Information System In Tanzania, Lucas Ngowi, Ellen Kalinga

Tanzania Journal of Engineering and Technology (TJET)

Socio-technical systems theory has rarely been used by system architects in setting up computing systems. However, the role of socio-technical concepts in computing, which is becoming social in nature, has made the concepts more relevant and commercial. Tax information systems are examples of such systems because they are influenced by external variables such as the political environment, technological trends, and social environment, introducing complexity in their deployment and determining the type of e-services and their delivery to a diverse group of people. It was observed that in Tanzania there is resistance, reluctance and minimal use of electronic tax system because …

Fully Coupled Internal Radiative Heat Transfer For The 3d Material Response Of Heat Shield, Raghava S. C. Davuluri, Rui Fu, Kaveh A. Tagavi, Alexandre Martin

Mechanical Engineering Faculty Publications

The radiative transfer equation (RTE) is strongly coupled to the material response code KATS. A P-1 approximation model of RTE is used to account for radiation heat transfer within the material. First, the verification of the RTE model is performed by comparing the numerical and analytical solutions. Next, the coupling scheme is validated by comparing the temperature profiles of pure conduction and conduction coupled with radiative emission. The validation study is conducted on Marschall et al. cases (radiant heating, arc-jet heating, and space shuttle entry), 3D Block, 2D IsoQ sample, and Stardust Return Capsule. The validation results agree well for …

Interaction Of A Shock Wave With A Particle Curtain, Daniel M. Freelong

Mechanical Engineering ETDs

This thesis presents an experimental study of the interaction of a normal shock wave with a sparse curtain of particles. Soda lime particles with a nominal diameter of 40 micrometers are used to form the curtain. A high speed camera captured several segments of the particle curtain flow from the front view, including the early formation stages. The frames from the video segments were then extracted into individual sequential images. Properties were found using the images such as the velocity fields, time evolution of multiphase Atwood number, and perturbation growth. Volume fractions were derived from mass discharge measurements and particle …

Main Factors That Influence The Thermal Stress State Of Piston Engine Parts, J F. Ismatov, A I. Yangibayev, N V. Vadulina, A A. Jalilov

Technical science and innovation

The development of a holistic, effective, and scalable structure of economic management, as well as the introduction of a program to improve the technical level and efficiency of machinery, are two of the most important concepts for the deep reconstruction of the Republic of Uzbekistan's economic process. Vehicles with diesel engines are gradually being introduced to our country's car fleet. Modern diesel engines are being developed by boosting them: increasing the average effective pressure and speed. Therefore, high reliability and service life, fuel efficiency and environmental performance are the main criteria for their quality. Forcing diesels leads to an increase …

Dynamic Aeroelastic Response Of Stall-Controlled Wind Turbine Rotors In Turbulent Wind Conditions, Sara Jalal, Fernando L. Ponta, Apurva Baruah, Anurag Rajan

Michigan Tech Publications, Part 1

With the current global trend of the wind turbines to be commissioned, the next generation of state-of-the-art turbines will have a generating capacity of 20 MW with rotor diameters of 250 m or larger. This systematic increase in rotor size is prompted by economies-of-scale factors, thereby resulting in a continuously decreasing cost per kWh generated. However, such large rotors have larger masses associated with them and necessitate studies in order to better understand their dynamics. The present work regarding the aeroelastic behavior of stall-controlled rotors involves the study of the frequency content and time evolution of their oscillatory behavior. A …