Open Access. Powered by Scholars. Published by Universities.®

Digital Commons Network™

Open Access. Powered by Scholars. Published by Universities.®

Mechanical Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 2851 - 2880 of 13128

Full-Text Articles in Entire DC Network

Effectiveness Against White Sharks Of The Rpela Personal Shark Deterrent Device Designed For Surfers, Craig Blount, Dan Pygas, Marcus P. Lincoln Smith, Daryl P. Mcphee, Colby Bignell, Ocean Ramsey Sep 2021

Effectiveness Against White Sharks Of The Rpela Personal Shark Deterrent Device Designed For Surfers, Craig Blount, Dan Pygas, Marcus P. Lincoln Smith, Daryl P. Mcphee, Colby Bignell, Ocean Ramsey

Journal of Marine Science and Technology–Taiwan

Many shark bites to humans, including fatalities, have involved surfers. Various personal shark deterrents are commercially available to surfers, including Rpela v2, which is a battery-powered device fitted to a surfboard. It produces an electric field around the surfer aimed at deterring sharks from approaching or biting by disrupting their electro-reception organs. The device was tested on white sharks (Carcharodon carcharias) at Salisbury Island, Western Australia. In total, 46 trials were done with the Rpela v2 either active or not active to determine the device’s effect on sharks’ response to a floating board with fish bait attached (to tempt a …

Go to article

Inter-Annual Changes Of Water Temperature In The Southern South China Sea's Continental Shelf: The Influence Of Enso On Malaysian Waters, Afifi Johari, Mohd Fadzil Akhir, Muhammad Naim Satar, Zuraini Zainol, Guo Jingsong Sep 2021

Inter-Annual Changes Of Water Temperature In The Southern South China Sea's Continental Shelf: The Influence Of Enso On Malaysian Waters, Afifi Johari, Mohd Fadzil Akhir, Muhammad Naim Satar, Zuraini Zainol, Guo Jingsong

Journal of Marine Science and Technology–Taiwan

An extensive amount of data from the World Ocean Database (WOD) that covers the southern South China Sea (SSCS) were analysed to study the long-term trends and variations of the El-Nino Southern Oscillation (ENSO) event. The WOD data were selected from 1951 to 2010, which included the area within 0–10 °N and 100–117 °E. El-Nino and La-Nina anomaly results showed that the sea surface temperature anomalies (SSTa) trend of SSCS was higher during offset-El-Nino years and lower during offset-La-Nina years. Besides, the inter-annual vertical water temperature profile revealed that the deepening of the warmer water temperature occurred in February and …

Go to article

The Eumedonine Genera Eumedonus H. Milne Edwards, 1834, And Gonatonotus White, 1847 (Crustacea: Brachyura: Pilumnidae) In Taiwan, Peter K. L Ng, Chia-Wei Lin Sep 2021

The Eumedonine Genera Eumedonus H. Milne Edwards, 1834, And Gonatonotus White, 1847 (Crustacea: Brachyura: Pilumnidae) In Taiwan, Peter K. L Ng, Chia-Wei Lin

Journal of Marine Science and Technology–Taiwan

Two species of eumedonine crabs, Eumedonus zebra Alcock, 1895, and Gonatonotus nasutus Chia & Ng, 2000, are recorded from Taiwan, the former for the first time. Both are also new genera records for the island. Notes on variation are noted and their taxonomy briefly treated. The number of eumedonine species, all of which are obligate symbionts on echinoderms, known from the island is now seven genera and seven species.

Go to article

An Analysis Of Consumer Evaluations Of The “Tagonoura Shirasu” Certification Under The Japan Geographical Indication Protection System, Yu-Heng Lu, Takahiro Sajiki Sep 2021

An Analysis Of Consumer Evaluations Of The “Tagonoura Shirasu” Certification Under The Japan Geographical Indication Protection System, Yu-Heng Lu, Takahiro Sajiki

Journal of Marine Science and Technology–Taiwan

Over time, the Geographical Indication (GI) protection system has been independently adopted in more than 100 countries worldwide. In Japan, the GI protection system has been operating since 2015 in response to a growing interest in local brands. Therefore, based on a questionnaire survey, we econometrically analyze the consumer evaluation of Shizuoka Prefecture’s Shirasu “Tagonoura Shirasu,” which is registered under the GI protection system. Shirasu is a collective term for long and narrow larvae such as anchovy (Engraulis japonicus), sardine (Sardinops melanostictus), or red-eye round herring (Etrumeus sadina). Based on the contingent valuation method, we clarified that consumers' additional willingness …

Go to article

A Two-Stage Approach To Integrate Vessel Geo-Tracking Data And Logbooks For Monitoring Fishing Activity Of Coastal Fisheries In Waters Off Northwestern Taiwan, Yi-Jou Lee, Nan-Jay Su, Cheng-Hsin Liao, Wei-Chuan Chiang, Chun-Huei Li Sep 2021

A Two-Stage Approach To Integrate Vessel Geo-Tracking Data And Logbooks For Monitoring Fishing Activity Of Coastal Fisheries In Waters Off Northwestern Taiwan, Yi-Jou Lee, Nan-Jay Su, Cheng-Hsin Liao, Wei-Chuan Chiang, Chun-Huei Li

Journal of Marine Science and Technology–Taiwan

Catch and fishing effort data are fundamental information to stock assessment and fisheries management, but difficult to obtain without the support of administration and sound fishery data collection system. This study integrated various sources of data from a simplified vessel geo-tracking system and logbooks from interviews with captains of coastal gillnet fisheries. We developed a two-step approach based on hierarchical cluster analysis to characterize the operation patterns and infer the fishing activities of the fishery. Results showed that the fishing effort in terms of operation duration could be estimated precisely for various vessel sizes, with catch composition and harvest information …

Go to article

Effect Of Chlorine Dioxide On The Removal Of Sulfadimethoxine And Sulfamethoxazole In Freshwater And Seawater, Zhen-Hao Liao, Dai-Chee Ng, Yu-Sheng Wu, Fan Hua Nan Sep 2021

Effect Of Chlorine Dioxide On The Removal Of Sulfadimethoxine And Sulfamethoxazole In Freshwater And Seawater, Zhen-Hao Liao, Dai-Chee Ng, Yu-Sheng Wu, Fan Hua Nan

Journal of Marine Science and Technology–Taiwan

This study aimed to understand the fate of sulfonamides (SAs) under dark condition in a laboratory-scale aquatic system, and evaluate the removal of SAs by using Chlorine dioxide. Based on the mass spectrometry quantification, our results have shown that two sulfonamides were transformed at very slow rate in the dark. The 180 day degradation efficiencies (%) of sulfadimethoxine (SDM) in freshwater and seawater were 6.37 ± 2.56 and 4.38 ± 3.43, respectively, while those of sulfamethoxazole (SMX) in freshwater and seawater were 7.81 ± 2.15 and 6.60 ± 2.69, respectively. In the treatment of Chlorine dioxide for the removal of …

Go to article

Long-Term Observations Of Interannual And Decadal Variation Of Sea Surface Temperature In The Taiwan Strait, Ming-An Lee, Wei-Po Huang, Yi-Lo Shen, Jinn-Shing Weng, Bambang Semedi, Yi-Chen Wang, Jui-Wen Chan Sep 2021

Long-Term Observations Of Interannual And Decadal Variation Of Sea Surface Temperature In The Taiwan Strait, Ming-An Lee, Wei-Po Huang, Yi-Lo Shen, Jinn-Shing Weng, Bambang Semedi, Yi-Chen Wang, Jui-Wen Chan

Journal of Marine Science and Technology–Taiwan

Long-term observations of interannual and decadal variation of sea surface temperature (SST) in the Taiwan Strait (TS) were studied for the period 1870–2018; the climatology data were obtained from the Met Office Hadley Centre, UK. In the study period, the highest annual mean and lowest SST observed were 25.3°C in 1998 and 22.4°C in 1919, respectively. Six distinct regimes were identified. The first regime of fairly stable or slightly cooling SST lasted through the 1920s. The two regime shifts of 1919 to 1945 and 1976–1977 to 1998 led to the two fast warming trends of 2.0°C in 26 years, from …

Go to article

Experimental Investigation And Modeling Of The Response Surface Methodology For The Optimization Of A Multiloop Heat Pipe, Dar-Sun Liou Sep 2021

Experimental Investigation And Modeling Of The Response Surface Methodology For The Optimization Of A Multiloop Heat Pipe, Dar-Sun Liou

Journal of Marine Science and Technology–Taiwan

Considering thermohydrodynamic instabilities in the design of cooling systems has become a trend, which has led to the evolution of thermal management. However, such instabilities, which cause flow perturbations, are difficult to explain by using physical theories. The aim of this study was to use a parameter-based modeling technique, namely the response surface methodology (RSM), to characterize the dynamics of multiloop heat pipes (MLHPs) under various heat loads. The RSM, which is based on statistics, was used to determine the relationship between the design parameters and thermal responses of MLHPs, which are represented using polynomials. Th aim of our RSM …

Go to article

Supply Chain Inventory Model With Markov Chain Demand, Zhi-Ping Lin, Su-Ping Ho Sep 2021

Supply Chain Inventory Model With Markov Chain Demand, Zhi-Ping Lin, Su-Ping Ho

Journal of Marine Science and Technology–Taiwan

This study aims to develop a new one-vendor multiple-buyers integrated inventory model. We believe that our proposed model can forecast the demand of all buyers in the coming future by using data that have already existed and to minimize the total cost-for both buyers and vendors. In recent days, the Markov chain approach has played one of the critical methods of demand forecasting in the Supply Chain Management (SCM) field. The proposed model of this study is to analysis the demand of all buyers in one specific season that was impacted by the demand in the same season from last …

Go to article

Fire Resistance Of Steel Connectors Of Precast Lightweight Concrete Walls, Jen-Hao Chi, Maochieh Chi, Yue-Lin Huang Sep 2021

Fire Resistance Of Steel Connectors Of Precast Lightweight Concrete Walls, Jen-Hao Chi, Maochieh Chi, Yue-Lin Huang

Journal of Marine Science and Technology–Taiwan

In this study the fire test was performed to investigate the mechanic behaviors and failure patterns of precast normal weight concrete (NWC) and lightweight concrete (LWC) walls with three types of commonly used steel connectors, namely dry (61), wet (81), and bearing (56E) connectors. For the LWC wall specimens, on lateral application of tension, the cracking load values of the dry, wet, and bearing-type connectors were 95.1%, 86.3%, and 83.0%, respectively, of the original loads, and their ultimate load values were 81.6%, 90.7%, and 85.0%, respectively, of the original. In the shearing test after the fire resistance test, the cracking …

Go to article

Differential Evolution Algorithm For Ship Path Planning In Open Waters, Yu-Tao Kang, Wei-Jiong Chen, Jin-Hui Wang Sep 2021

Differential Evolution Algorithm For Ship Path Planning In Open Waters, Yu-Tao Kang, Wei-Jiong Chen, Jin-Hui Wang

Journal of Marine Science and Technology–Taiwan

A general approach to the derivation of simple yet accurate formulas for identifying bandpass nonlinear channels in or-thogonal frequency-division multiplexing (OFDM) systems is proposed in this paper. The OFDM is an widely adopted tech-nique for wideband communication applications. An OFDM signal could be highly vulnerable to nonlinearities in a com-munication link. This makes proper estimation of the nonlin-ear channel essential for an OFDM system. A nonlinear bandpass communication channel is commonly described by a complex Voletrra series, in which the task of nonlinear channel identification is to determine the Volterra kernels. This task can become very difficult when the order …

Go to article

Integrated Simulation Of Virtual Prototypes And Control Algorithms Of Unmanned Surface Vehicles Based On A Robot Operating System, Hye-Won Lee, Joo-Hyun Woo, Myung-Il Roh, Seung-Ho Ham, Luman Zhao, Sol Ha, Nak-Wan Kim, Chan-Woo Yu Sep 2021

Integrated Simulation Of Virtual Prototypes And Control Algorithms Of Unmanned Surface Vehicles Based On A Robot Operating System, Hye-Won Lee, Joo-Hyun Woo, Myung-Il Roh, Seung-Ho Ham, Luman Zhao, Sol Ha, Nak-Wan Kim, Chan-Woo Yu

Journal of Marine Science and Technology–Taiwan

Unmanned surface vehicles (USVs) require autonomous software with a high level of liberalization and automation to complete various missions. Therefore, experimental verification and validation of this software at the initial design stage are essential. However, such experiments are impossible before the actual hardware is developed, and the creation of an external environment for the mission requires substantial cost and time. In this study, virtual prototypes of the mission environment and hardware for the USV are developed. Then, a simulation environment for testing the control algorithms in the autonomous software is constructed. Data communication with the USV hardware is necessary for …

Go to article

Identification Of Nonlinear Channels In Bandpass Communication Systems With Ofdm Inputs, Jen-Ho Cheng, Ching-Hsiang Tseng Sep 2021

Identification Of Nonlinear Channels In Bandpass Communication Systems With Ofdm Inputs, Jen-Ho Cheng, Ching-Hsiang Tseng

Journal of Marine Science and Technology–Taiwan

A general approach to the derivation of simple yet accurate formulas for identifying bandpass nonlinear channels in or-thogonal frequency-division multiplexing (OFDM) systems is proposed in this paper. The OFDM is an widely adopted tech-nique for wideband communication applications. An OFDM signal could be highly vulnerable to nonlinearities in a com-munication link. This makes proper estimation of the nonlin-ear channel essential for an OFDM system. A nonlinear bandpass communication channel is commonly described by a complex Voletrra series, in which the task of nonlinear channel identification is to determine the Volterra kernels. This task can become very difficult when the order …

Go to article

Metasurface Cloaks To Decouple Closely Spaced Printed Dipole Antenna Arrays Fed By A Microstrip-To-Balanced Transmission-Line Transition, Doojin Lee, Alexander B. Yakovlev Sep 2021

Metasurface Cloaks To Decouple Closely Spaced Printed Dipole Antenna Arrays Fed By A Microstrip-To-Balanced Transmission-Line Transition, Doojin Lee, Alexander B. Yakovlev

Faculty and Student Publications

In this work, we present a numerical study of 1D and 2D closely spaced antenna arrays of microstrip dipole antennas covered by a metasurface in order to properly cloak and decouple the antenna arrays operating at neighboring frequencies. We show that the two strongly coupled arrays fed by a microstrip-to-balanced transmission-line transition are effectively decoupled in 1D and 2D array scenarios by covering the dipole antenna elements with an elliptically shaped metasurface. The metasurface comprises sub-wavelength periodic metallic strips printed on an elliptically shaped dielectric cover around the dipole antennas and integrated with the substrate. We present a practical design …

Go to article

Characterizing Behaviors And Functions Of Joints For Design Of Origami-Based Mechanical Systems, Nathan Chandler Brown Sep 2021

Characterizing Behaviors And Functions Of Joints For Design Of Origami-Based Mechanical Systems, Nathan Chandler Brown

Theses and Dissertations

This thesis addresses a number of challenges designers face when designing deployable origami-based arrays, specifically joint selection, design, and placement within an array. In deployable systems, the selection and arrangement of joint types is key to how the system functions. The kinematics and performance of an array is directly affected by joint performance. This work develops joint metrics which are then used to compare joint performances, constructing a tool designers can use when selecting joints for an origami array. While often a single type of joint is used throughout an array, this work shows how using multiple types of joints …

Go to article

Comparison Of Theoretical And Multi-Fidelity Optimum Aerostructural Solutions For Wing Design, Jeffrey D. Taylor, Douglas F. Hunsaker Sep 2021

Comparison Of Theoretical And Multi-Fidelity Optimum Aerostructural Solutions For Wing Design, Jeffrey D. Taylor, Douglas F. Hunsaker

Mechanical and Aerospace Engineering Student Publications and Presentations

As contemporary aerostructural research for aircraft design trends toward high-fidelity computational methods, aerostructural solutions based on theory are often neglected or forgotten. In fact, in many modern aerostructural wing optimization studies, the elliptic lift distribution is used as a benchmark in place of theoretical aerostructural solutions with more appropriate constraints. In this paper, we review several theoretical aerostructural solutions that could be used as benchmark cases for wing design studies, and we compare them to high-fidelity solutions with similar constraints. Solutions are presented for studies with 1) constraints related to the wing integrated bending moment, 2) constraints related to the …

Go to article

Mechanism Design And Analysis: Developing An Understanding Of Mechanism Motion Through Graphical Modeling, Andrew J. Hughes, Chris Merrill Sep 2021

Mechanism Design And Analysis: Developing An Understanding Of Mechanism Motion Through Graphical Modeling, Andrew J. Hughes, Chris Merrill

Educational Leadership & Technology Faculty Publications

The intention of this article is to provide Technology and Engineering Educators with foundational knowledge of mechanism design and analysis and the ability to develop middle and high school students' mechanism knowledge during practical hands-on learning activities in the STEM classroom. Technology and Engineering Educators' implementation of mechanism design and analysis could promote students' increased depth of mechanical knowledge and ability to apply this knowledge during engineering design challenges. In this article, the authors present an introduction to four-bar mechanism design and analysis using CAD software to produce graphical representations. After designing mechanisms graphical, students should be allowed to produce …

Go to article

Thermal Vacuum Chamber Modification, Testing, And Analysis, Jared C. Lehmann Sep 2021

Thermal Vacuum Chamber Modification, Testing, And Analysis, Jared C. Lehmann

Master's Theses

This work discusses the modification and analysis of the Blue Thermal Vacuum Chamber (TVAC) located at the Space Environments Lab at California Polytechnic State University, San Luis Obispo. The modified design has a cylindrical test section and can accommodate 6U Cubesats or larger for educational or research purposes. The sizing process for the modified shroud cooling system and modular heating plates is discussed. The modified cooling system uses existing nitrogen plumbing into the chamber and control systems with a new copper shroud. The modified heating system uses modular heater plates, which utilize the existing three heater strips. The modified system …

Go to article

Fourth-Order Adjoint Sensitivity And Uncertainty Analysis Of An Oecd/Nea Reactor Physics Benchmark: I. Computed Sensitivities, Ruixian Fang, Dan Gabriel Cacuci Sep 2021

Fourth-Order Adjoint Sensitivity And Uncertainty Analysis Of An Oecd/Nea Reactor Physics Benchmark: I. Computed Sensitivities, Ruixian Fang, Dan Gabriel Cacuci

Faculty Publications

This work extends the investigation of higher-order sensitivity and uncertainty analysis from 3rd-order to 4th-order for a polyethylene-reflected plutonium (PERP) OECD/NEA reactor physics benchmark. Specifically, by applying the 4th-order comprehensive adjoint sensitivity analysis methodology (4th-CASAM) to the PERP benchmark, this work presents the numerical results of the most important 4th-order sensitivities of the benchmark’s total leakage response with respect to the benchmark’s 180 microscopic total cross sections, which includes 180 4th-order unmixed sensitivities and 360 4th-order mixed sensitivities corresponding to the largest 3rd-order ones. The numerical results obtained in this work reveal that the number of 4th-order relative sensitivities that …

Go to article

Molecular Interfaces And Heterogeneous Bubble Nucleation From Heated Surfaces At Nanoscale, Manish Gupta Aug 2021

Molecular Interfaces And Heterogeneous Bubble Nucleation From Heated Surfaces At Nanoscale, Manish Gupta

Dissertations - ALL

Heat transfer from a solid surface to fluid occurs in numerous applications, such as boilers, refrigerators, power electronics, etc., and include various underlying phenomena of thin-film evaporation, boiling, condensation, surface wetting, and droplet evaporation. Several studies show that heat transfer can be enhanced significantly by incorporating micro and nanoscale features onto surfaces. Phase change heat transfer plays an important role in dissipating energy from hot surfaces and distributing it to bulk liquid due to high latent heat of liquids. Boiling, a phase change heat transfer phenomenon, happens when the surface is heated to a temperature above the saturation temperature of …

Go to article

Creation Of A Cip Method For The Heat Exchangers At Rolls-Royce, Melanie Howe, Austin Williams, Caroline Dempsey, Bethany Fralick Aug 2021

Creation Of A Cip Method For The Heat Exchangers At Rolls-Royce, Melanie Howe, Austin Williams, Caroline Dempsey, Bethany Fralick

Journal of the South Carolina Academy of Science

Rolls-Royce produces various engines which must be tested prior to their distribution to ensure a high-quality product. The manufacturing plant contains four test cells where the engines can be subjected to high levels of torque and extreme temperatures. A heat exchanger is necessary in this testing system and over time, unwanted waste accumulates on the system’s plates. The team is tasked with developing and implementing a system mounted on a mobile cart which can provide data to determine whether the plates need to be cleaned. For this cleaning system to work, it must fully saturate the heat exchanger in cleaning …

Go to article

The Effect Of Noise-Reducing Acoustic Panels On The Noise Levels And Overall Safety Of Infant Sleep Machines, Pranav Poola Aug 2021

The Effect Of Noise-Reducing Acoustic Panels On The Noise Levels And Overall Safety Of Infant Sleep Machines, Pranav Poola

Journal of the South Carolina Academy of Science

Infant sleep machines (ISMs) are devices used to help infants fall asleep faster and stay asleep for longer amounts of time, yet they can often be too loud for infantile ears, which could potentially be dangerous. This research aimed to minimize the risks of infant sleep machines without reducing the effectiveness of the infant sleep machines themselves through the use of acoustic panels. Based on previous studies, it was hypothesized that the acoustic panels would reduce the noise levels of the ISM to less than recommended limits of 50 dB-A. A specific corner of a designated room was prepared with …

Go to article

Design Of An Inexpensive Pvc Shock Tube For Educational Use, Brandon Edward Bergmann Aug 2021

Design Of An Inexpensive Pvc Shock Tube For Educational Use, Brandon Edward Bergmann

Theses and Dissertations

Herein is described the design and function of a low-cost, easy-to-assemble, -operate, and -disassemble shock tube platform experiment that can generate shock waves approaching Mach 2 at maximum pressures of ~100 psig with a helium driver gas. The experiment uses several inexpensive (<$5), unamplified piezoelectric sensors attached to a multichannel oscilloscope to monitor the passage of key features of the flow (i.e., incident shock and reflected shock) through the tube, constructed from inexpensive and easy to work with schedule 40 PVC pipe and fittings. From the fixed sensor displacements along the tube and relative differences in respective transit times, the velocities of these flow features can be determined. This permits (1) comparison of experimental results to the theoretical predictions of 1-D transient gas dynamics and (2) a leaping off point for discussion and quantification of non-idealities in the flow, including the shock wave development length, shock attenuation and boundary layer growth, and interactions of the reflected shock and contact surface. Experimental accessories (future work) for study of shock focusing and steady 2-D high speed flows are also briefly discussed. Assuming both pressurized, conditioned air at ~80-100 psig and a modern multi-channel oscilloscope are available at most institutions, the total cost to construct this experiment is around $500.

Go to article

Laser Surface Treatment And Laser Powder Bed Fusion Additive Manufacturing Study Using Custom Designed 3d Printer And The Application Of Machine Learning In Materials Science, Hao Wen Aug 2021

Laser Surface Treatment And Laser Powder Bed Fusion Additive Manufacturing Study Using Custom Designed 3d Printer And The Application Of Machine Learning In Materials Science, Hao Wen

LSU Doctoral Dissertations

Selective Laser Melting (SLM) is a laser powder bed fusion (L-PBF) based additive manufacturing (AM) method, which uses a laser beam to melt the selected areas of the metal powder bed. A customized SLM 3D printer that can handle a small quantity of metal powders was built in the lab to achieve versatile research purposes. The hardware design, electrical diagrams, and software functions are introduced in Chapter 2. Several laser surface engineering and SLM experiments were conducted using this customized machine which showed the functionality of the machine and some prospective fields that this machine can be utilized. Chapter 3 …

Go to article

Using Artificial Neural Network And Fuzzy Inference System Based Prediction To Improve Failure Mode And Effects Analysis: A Case Study Of The Busbars Production, Saeed Na’Amnh, Muath Bani Salim, István Husti, Miklós Daróczi Aug 2021

Using Artificial Neural Network And Fuzzy Inference System Based Prediction To Improve Failure Mode And Effects Analysis: A Case Study Of The Busbars Production, Saeed Na’Amnh, Muath Bani Salim, István Husti, Miklós Daróczi

Mechanical Engineering Faculty Publications and Presentations

Nowadays, Busbars have been extensively used in electrical vehicle industry. Therefore, improving the risk assessment for the production could help to screen the associated failure and take necessary actions to minimize the risk. In this research, a fuzzy inference system (FIS) and artificial neural network (ANN) were used to avoid the shortcomings of the classical method by creating new models for risk assessment with higher accuracy. A dataset includes 58 samples are used to create the models. Mamdani fuzzy model and ANN model were developed using MATLAB software. The results showed that the proposed models give a higher level of …

Go to article

Flow Characterization In Mine Ventilation Fan Blade Design Using Cfd, Anwar Endris Hassen Aug 2021

Flow Characterization In Mine Ventilation Fan Blade Design Using Cfd, Anwar Endris Hassen

Journal of Sustainable Mining

In axial ventilation fans, the generation of a uniform flow velocity is desirable for better efficiency. To that end, different fan blade types have been developed to achieve better flow uniformity. This article aimed to characterize the flow distribution and its uniformity in four blade designs, namely constant chord, tapered blade, skewed blade, and tapered skewed blade, using Computational Fluid Dynamics (CFD). The study employs an iterative study where key study decisions are made as the study progresses. The study began with the selection of a blade profile for the study. A comparative study between the NACA seven-digit and four-digit …

Go to article

Acoustic Tweezer With Complex Boundary-Free Trapping And Transport Channel Controlled By Shadow Waveguides., Junfei Li, Chen Shen, Tony Jun Huang, Steven A Cummer Aug 2021

Acoustic Tweezer With Complex Boundary-Free Trapping And Transport Channel Controlled By Shadow Waveguides., Junfei Li, Chen Shen, Tony Jun Huang, Steven A Cummer

Henry M. Rowan College of Engineering Departmental Research

Acoustic tweezers use ultrasound for contact-free, bio-compatible, and precise manipulation of particles from millimeter to submicrometer scale. In microfluidics, acoustic tweezers typically use an array of sources to create standing wave patterns that can trap and move objects in ways constrained by the limited complexity of the acoustic wave field. Here, we demonstrate spatially complex particle trapping and manipulation inside a boundary-free chamber using a single pair of sources and an engineered structure outside the chamber that we call a shadow waveguide. The shadow waveguide creates a tightly confined, spatially complex acoustic field inside the chamber without requiring any interior …

Go to article

Three-Dimensional Phase Field Modeling Of Fracture In Shape Memory Ceramics, Ehsan Moshkelgosha, Mahmood Mamivand Aug 2021

Three-Dimensional Phase Field Modeling Of Fracture In Shape Memory Ceramics, Ehsan Moshkelgosha, Mahmood Mamivand

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Despite the vast applications of transformable ceramics, such as zirconia-based ceramics, in different areas from biomedical to aerospace, the fundamental knowledge about their mechanical degradation procedure is limited. The interaction of the phase transformation and crack growth is crucial as the essential underlying mechanism in fracture of these transformable ceramics, also known as shape memory ceramics. This study develops a three-dimensional (3D) multiphysics model that couples the variational formulation of brittle crack growth to the Ginzburg-Landau equations of martensitic transformation. We parameterized the model for the 3D single crystal zirconia, which experienced stress- and thermal-induced tetragonal to monoclinic transformation. The …

Go to article

Attachment Of Fibrous Materials In Nature And Surgical Repair, Ethan Daniel Hoppe Aug 2021

Attachment Of Fibrous Materials In Nature And Surgical Repair, Ethan Daniel Hoppe

McKelvey School of Engineering Graduate Student Theses & Dissertations

Mother nature is the ultimate problem solver. Often by brute force and necessity for survival, the organism that has the best solution to a problem is the one to proliferate. One of these problems for which nature provides an elegant solution is the attachment of dissimilar materials. This dissertation explores the strengthening and relaxation of interactions between soft and hard materials, typically with one of the two being fibrous in character, with the goal of identifying strategies for improving the surgical reattachment of tendon to bone. The work begins with a study of the plant Harpagonella palmeri, which the dissertation …

Go to article

Synthesis And Biomedical Applications Of Functional Polymers, Jianxun Ding, Di Li, Jingxiao Chen, Chao Zhao, Parisa Pour Shahid Saeed Abadi Aug 2021

Synthesis And Biomedical Applications Of Functional Polymers, Jianxun Ding, Di Li, Jingxiao Chen, Chao Zhao, Parisa Pour Shahid Saeed Abadi

Michigan Tech Publications, Part 1

No abstract provided.

Go to article

First Prev Next Last