Digital Commons Network^™

An Isopach Map And A Discussion Of The Permian In Wyoming And Adjacent Areas, Willard Leskela

Bachelors Theses and Reports, 1928 - 1970

The accelerated post-war demand for petroleum products with resultant high prices and dwindling reserves has spurred producers to an extensive search for new fields and for ad­ditional production in known fields. Exploration and discov­ery is dependent on the collection and correlation of vast amounts of data both in the field and that found in liter­ature.

Roasting And Leaching Of Montana Chromite, Jerry D. Murphy

Bachelors Theses and Reports, 1928 - 1970

The United States, although the leading consumer of chromite, depends almost entirely on imports for its supply. Domestic production of chromite is limited, because high-grade imported ore is plentiful and inexpensive in normal times. There are several large deposits of chromite in the United States, representing millions of tons of low grade ore. These deposits form a strategic reserve that must be used in time of national emergency.

Sulfatizing Roasting Of A Copper Sulfide Ore, Walter D. Finnegan

Bachelors Theses and Reports, 1928 - 1970

At present copper sulfide ores are recovered by pyrometallurgical processes. While the recovery of cop­per from sulfide ores by hydrometallurgical means has long been considered attractive, the impurities, low re­covery and mechanical difficulties have kept this process from becoming commercial.

Geology Of The Lost Creek-Modesty Creek Area Deerlodge County, Montana, Howard B. Nickelson, Robert L. Pott

Bachelors Theses and Reports, 1928 - 1970

In 1915 the United States Geological Survey published a folio by Calkins and Emmons on the geology of the Philipsburg Quadrangle, which ad­joins the area now under study to the west. Geology of this portion of Montana had not been mapped previously; consequently the purpose of this thesis is to make a geological reconnais­sance of the stratigraphy and structure of the area.

A Study Of The Action Of Various Energizers In The Carburization Of Steel, William N. Warren

Bachelors Theses and Reports, 1928 - 1970

The object of casehardening is to produce articles of steel having a tough or ductile interior and a hard sur­face. Quenching produces a surface somewhat harder than the interior, but in order to obtain a high surface hard­ness, the percentage of alloying elements in the steel must be raised to such an extent that the core or central por­tion becomes hard and brittle also.

Geology Of Montana, Stanley G. Olson

Bachelors Theses and Reports, 1928 - 1970

A vast amount of information has been published by many workers on particular features of the geology of the state of Montana, as well as on local geology of many smaller divi­sions. However, a satisfactory summary of the geology in general, which would include all phases of geology as they apply to the greater area of the entire state, has not been published.

A Study Of The Diffusion Of Electroplated Coatings In The Solid State., Michael R. Writt

Bachelors Theses and Reports, 1928 - 1970

The term diffusion means an equalization or homogenization of diverse materials. Specifically ap­plied to metals, diffusion is the interchange of atoms. It is, in effect, an invasion of one crystal lattice by the atoms of one or more other crystal lattices. Therefore, the study of diffusion must involve the geometry and physics of crystal lattices as well as their energies.

Leaching Of Low Grade Rhodochrosite, E. D. King

Bachelors Theses and Reports, 1928 - 1970

Although there are many uses for manganese today, none of them approaches its importance as a deoxidizing agent in the manufac­ture of steels. Without manganese the steelmaking in­dustry would be very seriously handicapped. The metal­lurgy of manganese has been developed around the high-grade ores, and unfortunately, our reserves of high-grade ores are very limited.

The Electrodeposition Of Iron-Manganese Alloys, Kenneth H. Larson

Bachelors Theses and Reports, 1928 - 1970

Although the alteration of properties resulting from the alloying of metals in their usual commercial forms has been extensively investigated, the field of electrodeposition of alloys is believed generally not to have received the atten­tion that it merits.

A Study Of The Physical Properties Of Low Tin Solders, Cornelius P. Dwyer

Bachelors Theses and Reports, 1928 - 1970

In 1947, out of the 100,000 long tons of tin con­sumed in the United States, 25,000 tons went into solder. Tin plate took 39,000 tons while babbit, bronze and coll­apsible tubes accounted for approximately 17,000 tons. Solder ranked second to tin plate and required more than the next three major uses combined.

The Effect Of Manganese And Magnesium On The Hardening Of Copper-Aluminum Alloys, Robert M. Hansen

Bachelors Theses and Reports, 1928 - 1970

During recent years, duralumin and all aluminum alloys have been made the object of much discussion regarding their hardening mechanism. The commercial success of nearly all of the alloys of aluminum and mag­nesium is dependent on their ability to age or precipitation harden.

An Investigation Of Age-Hardening In A Commercial Copper-Beryllium Alloy, Terry Horne

Bachelors Theses and Reports, 1928 - 1970

This investigation is concerned with the age-hardening process as exemplified by the aging of a commercial Cu-Be alloy and, in particular, with this pro­cess as determined by X-ray methods. The amount of infor­mation available on age-hardening of commercial alloys is scanty and what information there is, is inaccurate.

An Investigation Of The Anodic Oxidation Of Aluminum In A Sulfuric Acid Electrolyte, William D. Michaely

Bachelors Theses and Reports, 1928 - 1970

When aluminum is allowed to stand in air or is heated in air, a thin oxide film is produced on the metal. If aluminum is made the anode in a suitable electrolyte and a current applied, a coating is obtained which is similar to that produced in air, but may be effected much quicker. This film is thicker, harder, more resistant to corrosion and abrasion, and more adhesive than the natural oxide. The film is porous and makes an excellent adsorptive for dyes and pigments.

Oxygen Enriched Atmosphere Roasting, Clarence Wells Jr

Bachelors Theses and Reports, 1928 - 1970

The possible benefits of oxygen enriched atmosphere roasting have been known to metallurgists for many years, but only since the development of equipment and processes to produce cheap oxygen in very large amounts has much ser­ious consideration been given this matter.

Geology Of Upper Bear Gulch And Dry Boulder Creek Area Madison County, Montana, Norman King

Bachelors Theses and Reports, 1928 - 1970

Potential gold mines lie high among the rugged peaks of the Tobacco Root Mountains of southwestern Montana. This is a region where little geologic work has been done, though extensive mine operations have been carried on, and valuable ore has been shipped.

A Preliminary Study Of The Benefication Of Montana Kyanite, Donald Paul Mccarthy

Bachelors Theses and Reports, 1928 - 1970

This investigation is a preliminary study of the beneficiation of Montana kyanite, and while preliminary in degree the information gained may serve as a guide for the eventual exploitation of this Montana resource.

Foraminifera From Pleistocene Beds Near San Pedro, California, R. F. Mitchell

Bachelors Theses and Reports, 1928 - 1970

The age of rocks found in drill cores, and consequently the depths to possible oil-bearing formations has in many localities been determined by micro-paleontologic studies during the past three decades. Of the different micro-fossils used in this work, foraminifera have been studied most, are the best described, and hence, by far the most helpful.

A Geological Report On South Boulder Canyon And The Mayflower Mine-Renova Areas, B. R. Alto

Bachelors Theses and Reports, 1928 - 1970

The purpose of this report is to serve as a written explanation of the accompanying geologic maps and columnar sec­tion. Each year the senior students in mining and geological engineering at the Montana School of Mines spend two weeks in the field where they learn the fundamentals of geologic mapping and related field studies. An additional week is spent at the school where maps are assembled, prints made, end other work is done in preparation for the writing of the report.

Geology 63: Geological Report Of Senior Field Trip, Thomas L. Wilson

Bachelors Theses and Reports, 1928 - 1970

The field work was conducted in areas adjacent to White­hall, Montana, as has been the custom for the past several years. Instruction in the proper use of the telescopic and open sight alidades, and the Brunton compass for surveying geologic features was given. Advantages of pacing and speed­ometer mapping were pointed out and used.

A Study Of The Separation Of Wolframite From Tin-Oxide, Chih-Wen Ying

Masters Theses

"A number of mines in china, Bolivia, England, and other countries contain both tin-oxide and wolframite. Owing to the fact that the specific gravity of tin-oxide and wolframite is so nearly the same, considerable difficulty is experienced in making a gravity separation, and all attempts to do so by wet or dry concentration have given very poor results. The perfection of magnetic separators has done much to mitigate this difficulty, so that now complex ores of this nature can be treated in a satisfactory manner. The mixed concentrate from the tables or other concentrators, after being roasted to expel sulfur …

A Test Method For Measuring The Flow In Refractory Materials At High Temperatures, Christen Knudsen

Masters Theses

"One of the most important properties of refractory materials is the ability to resist stress which may either be directly applied or originate in the material. The factors which govern the resistance to stress include the modulus of elasticity, the ultimate strength under different types of stress, and the "flow" characteristics which become of importance when the material is stressed at the temperature at which plasticity is developed. Systematic determinations of the mechanical properties such as modulus of elasticity and ultimate or breaking stress is rather difficult or more or less impossible to carry out at the temperature at which …

The Effects Of Moisture In Grog Upon Dry Pressed Mixes Containing Grog, Charles L. Mckinnis

Masters Theses

"It has been found that the aging of clay-grog-water mixes before pressing proves to be quite beneficial. The purpose of the aging period is to allow the added water to disseminate throughout the mixture of clay (plastic) and grog (non-plastic) in an effort to bring about the best bonding action possible. The clay-grog-water mixture, if not aged, is of a sticky consistency; while, if the same mixture is aged for twenty-four (24) hours, it is readily workable. This process of aging has long been recognized as a "must" in the Ceramic Industry in obtaining mixtures of ideal workability"--Introduction, page 2.

A Preliminary Investigation Of The Titanium-Tin Equilibrium System, James Eugene Reynolds

Masters Theses

"Titanium is estimated to comprise about .63% of the lithosphere and atmosphere. This would render it the ninth in abundance of all the elements, and fourth in abundance of the metals suitable for mechanical and structural uses, being exceeded only by iron, aluminum, and magnesium. It is approximately 400 times more abundant than lead, which is generally considered to be quite plentiful. The chief restriction of the commercial availability of titanium in its pure form has been the difficulty of reducing it from its ores. Several methods have been proposed in the past and recent years, and R. S. Dean …

A Study Of The Retort Zinc Distillation Process, Albert Hoffman

Masters Theses

"The problem of this thesis is to determine the optimum density of packing of the charge to a zinc retort under exact industrial conditions of temperatures and materials as it affects the production of zinc metal. It is well known that the quantity of zinc produced per cycle is benefited by increasing the density of charging, but increased density of packing or charging is limited by the diffusion, through the charge of the gases necessary to carry on the reduction reactions. In commercial practice there is also a secondary limitation dependent primarily upon the rate at which the heat can …

An Investigation Of The Reduction Of Rutile Copper Oxide Mixtures With Magnesium, Tryggve Smedsland

Masters Theses

"It is known that the addition of titanium to certain types of brasses and bronzes gives them additional valuable properties. The copper-titanium master alloy which is the natural addition agent for making these brasses can not, however, be used if it has been made aluminothermically. It appears that aluminum in the master alloy makes it useless for the above purpose. It should, therefore, be worth while to determine if it is possible to produce a copper-titanium alloy by some method which eliminates the contamination by aluminum, and which would give a copper-titanium which could be used with advantage as an …

Properties Of Wire Suitable For The Fabrication Of Wire Cloth, Campbell William Floyd Funk

Masters Theses

"In the highly competative [sic] wire cloth industry, improvement of product quality is of paramount importance. With an eye to the future, the Ludlow Saylor Wire Company of St. Louis decided to embark upon a research program with the hope of improving the quality of their products above already high standards. An industrial research fellowship was instituted at the Missouri School of Mines and Metallurgy at Rolla for graduate research studies of the metallurgical, mechanical and chemical properties of wire as the [sic] pertain to the weaving of industrial wire cloth. Although relatively small quantities of wire are defective, their …

Studies Of Contact Angles On Oxidized Copper Minerals, John Stewart Carr

Masters Theses

"Effective flotation of an ore is the result of several factors: selection of suitable reagents; the proper combination of reagents, processing conditions of the operation proper such as time intervals involved and the machinery used. To focus the investigation on a specific field it was decided to investigate in some detail the behaviour of the more popular collectors toward oxidized copper minerals. This investigation was carried out chiefly by applying contact-angle measurements as obtained with the various collectors on the basic carbonate and oxide copper minerals. This basic information was desirable before carrying out actual flotation tests. There was little …

A Study Of Certain Ferromagnetic Alloys In The Systems Copper-Manganese-Indium And Copper-Manganese-Gallium, Frederick Arthur Hames

Doctoral Dissertations

"In 1898 F. Heusler discovered that certain alloys containing only copper, manganese, and tin are ferromagnetic. Since that time, ferromagnetic alloys have been reported to occur in the ternary systems copper-manganese-aluminum, copper-manganese-arsenic, copper-manganese-boron, copper-manganese-antimony, copper-manganese-zinc, silver-manganese-aluminum, and silver-manganese-tin. Such ferromagnetic alloys containing only non-ferromagnetic elements have come to be called "Heusler alloys."

From the metallographic standpoint, the ferromagnetic copper-manganese-aluminum and copper-manganese-tin alloys have been the most fully investigated of the Heusler alloys. These alloys owe their ferromagnetism to the beta phases in their respective systems. The structure of the beta phase is based on a body-centered cubic lattice.

In view …

Mayflower, Renova Basin, And South Boulder Creek Areas, Howard Nickelson

Bachelors Theses and Reports, 1928 - 1970

In Montana at the turn of the century a great many men sought the riches buried in the earth's crust. Prospectors fanning out from Butte and other early Montana mining areas located veins at the Mayflower, Renova, and Gold Hill areas.

Geology Of The Renova-Bone Basin And Mayflower Mine Areas, R. L. Burns

Bachelors Theses and Reports, 1928 - 1970

This report has been compiled from the data collected during the September, 1947, geologic field trip of the Montana School of Mines. The trip, under the direction of Dr. E. S. Perry, consisted of two weeks of field mapping and observation near Whitehall, Montana, and one week at the Montana School of Mines preparing this report.