Digital Commons Network^™

Reduction Of Zinc Sulphide In A Vacuum, Tien-Shih Liu

Masters Theses

"The successful large scale commercial application of high vacuum for high temperature metallurgical operations is a comparatively new development. The use of Pidgeon and the carbothermic processes for the production of magnesium during the war forced a perfection of both equipments and techniques for high vacuum operations. This opens broadly the way for a great expansion of vacuum metallurgy. Vacuum operation is thus no more a laboratory method - it is a kind of industrial practice. Many metallurgical operations, which cannot be carried out by ordinary processes, are made feasible when conducted in a reduced pressure. typical examples are the …

An Investigation Of The Production Of Multicarbide Of Tungsten And Titanium From Wo₃ - Tih₂ - C Mixtures, Chi-Mei Hsiao

Masters Theses

"The purpose of this research was to investigate the possibility of producing the multicarbides of tungsten and titanium from a tungsten oxide-titanium hydride-carbon mixture. It appears to be worthwhile to carry out the reduction, carburization, and pre-alloying in one process, i.e. reducing tungsten oxide with the dissociated hydrogen from titanium hydride and the added carbon; then carburizing the reduced tungsten metal and dissociated titanium metal; at last, pre-alloying the mixture of TiC and WC. The replacement of titanium hydride with titanium oxide seems to be more direct, simple, and economical process; but the difficulty in the reduction of titanium oxide …

Barium-Tin Alloys, James Richard Whanger

Masters Theses

"The author attempted to produce alloys of barium and tin using metallic barium and barium hydride. Also, an attempt was made to study the phase diagram using thermal analysis and X-ray investigation"--Introduction, page 2

The Effect Of Silicate Ion And Hydroxyl Ion On The Abstraction Of Potassium Ethyl Xanthate By Galena, Pao-Zung Wu

Masters Theses

"The purpose of this research was to investigate the effect of the silicate ion and the hydroxyl ion on the removal of potassium ethyl xanthate by galena; since the former ion is encountered during flotation owing to dissolution of silicates, and also sodium silicate being often used to disperse gangue minerals, and the latter one is encountered during floating in an alkaline circuit"--Introduction, page 1.

A Preliminary Investigation Of The Titanium-Copper Equilibrium System, August Robert Savu

Masters Theses

"The element titanium has a high degree of chemical activity at room temperature when in a finely divided condition. In the massive state this activity is only exhibited at high temperatures. The powdered metal is highly pyrophoric. Titanium forms quite stable sulphides and carbides, although these are subject to oxidation at high temperatures. It also form nitrides. Titanium being a transitional element forms hydrides with hydrogen which are stable at ordinary temperatures, but which dissociate at red heat liberating the hydrogen and leaving the metallic titanium in a very active state. Alloys are formed with such metals as aluminum, manganese, …

The Lithium Tungsten Bronzes, Shun Sheng Hsu

Masters Theses

"The 'tungsten bronzes are a series of anionic substitutional solid solutions of alkali or alkaline earth metal metatungstates and tungstic oxide. They are neither alloys or intermetallic compounds, the term "tungsten bronzes" was adopted because of their remarkable metallic properties -- e.g., high electrical conductivity, metallic luster on the crystal, and high specific gravity. Also owing to their intense and vivid colors and chemical inactivity it was possible to use them in the paint industry as a substitute for the so-called "bronze powders", the latter term is applied to the finely divided metal powders, such as aluminum, copper, brass, and …

Treatment Of Zinc Crusts By Vacuum Distillation, Chang-Hsu Shih

Masters Theses

"The purpose of this research is to investigate the possibility of obtaining reasonably pure silver from the zinc crusts by vacuum distillation in one step. The effect of temperature, pressure, particle size, and time of distillation will be determined. The behavior of other constituents in the crusts are also to be studied"--Introduction, page 5.

Comparative Study Of The Collecting Property Of Naphthenic Acids With Oleic Acid As Applied To Calcite, Hematite, Barite, And Fluorspar, Siddhi Nath Mukherji

Masters Theses

"The present investigation was undertaken to find out any comparable collecting property of some of the industrial naphthenic acids available in the market with that of commercial grade of oleic acid so that some information may be available in selecting naphthenic acids as flotation collectors. In the flotation industry, usefulness of oleic acid as non-metallic minerals collector is well established. On the other hand, the use of naphthenic acids as flotation collector has been reported only in few cases. Even in those cases, no attempt has been made to correlate their collecting properties with that of their physical and chemical …

The Investigation Of Color Modification As A Result Of Solid Solution, Bobby Lee Mornin

Masters Theses

"To the ceramic industry, color has long been one of its chief problems, not only in reproducing colors in the many complex silicate structures but in the development of stains that are stable at high temperatures and that are economically feasible for mass production. At the present time a stable high temperature red or yellow would be very desirable. Solid solution has been employed in ceramics to modify and thereby provide ceramic materials of different physical characteristics. The limited data available with respect to such solid solution serves to indicate that perhaps this state may serve as an important means …

An Investigation Of The Weavability Of Wire With Observations On The Defects Of Wire And Wire Cloth, Walston Chubb

Masters Theses

"In the course of this year's work under the auspices of the Ludlow-Saylor research fellowship many problems of interest to the wire weaving industry have been investigated. Some of these problems have no academic novelty; others were not completed and have been laid aside for future investigations. The major problem for investigation this year was to discover a method by which the weavability of wire might be evaluated. A second problem for investigation was to discover the causes of some of the defects of wire and wire cloth. In addition to presenting the results of these investigations, this thesis represents …

Effect Of Transition Elements On The Transmittance Of B₂O₃ Glasses, Chandubhai Gordhanbhai Amin

Masters Theses

"For many years, boric oxide has been used extensively as a minor constituents in silicate glasses, because of its beneficial influence on their physical properties as well as on glass melting processes; but when used without silica or in too large proportion, the resulting glasses lack chemical durability...Because of its detrimental effect as a major constituent in silicate glasses or in borate glasses, very little work has been done on borate glasses, especially on colored borate glasses...The purpose of this investigation is to find out the effect of the transition elements on the transmission curves of the colored borate glasses"--Introduction, …

Preparation Of Copper Single Crystals By Means Of Powder Metallurgy Methods, Wei-Kung Chang

Masters Theses

"Since different mechanical properties of metals result from different grain size became known, the metallurgists have been interested in finding out the true nature of the grain boundaries. Consequently, several different theories concerning the mechanism of recrystallization, grain growth, and the structure of metals were advanced and studied. These threw much light on the difference of properties between polycrystalline metals and single crystals of the same metals. The single crystals of metals were studied because they enabled the investigator to determine the important points of metallic behavior. The first work on single crystals was rather obscure and limited to isolated, …

Wetting Properties Of Enamel Glasses And Relation To Adherence, Chandrakant Chhotalal Shah

Masters Theses

"Various investigators have tried to find the cause of adherence of enamel glasses to iron metal and they have put forward different theories to explain this phenomena of adherence. In spite of much work done on adherence, no theory has generally been accepted to explain the function of adhering oxides like cobalt, nickel or manganese, etc., in sheet iron ground coats. In this investigation it was thought to find out whether adherence promoting oxides have any effect on the wetting abilities of enamel glasses at elevated temperatures or not, and further, whether this different wettability caused by the different adherence …

Effect Of Titanium Dioxide As A Mineralizer In Silica Brick, Henry Clay Brassfield

Masters Theses

"The magnitude of the thermal expansion of silica brick and its inability to withstand rapid temperature changes gives rise to problems of considerable importance in the manufacture of silica brick. In firing the silica brick, mineralogical changes occur in the quartzite from which the brick is made, in which minerals of lower specific gravity are formed. This results in a permanent expansion of the brick. These mineralogical changes have been thoroughly studied and considerable information is known on the different forms of silica produced at the higher temperatures. If the conditions of firing are such that these changes have progressed …

X-Ray Investigations Of The Metal Deposits Resulting From The Electrochemical Displacement Process, Cheng Chih Fang

Masters Theses

"The principle of electrochemical displacement has been well established in the science of chemistry and applied as a commercial process in some metallurgical processes, such as the cementation process and the immersion method of metal coatings. According to the EMF series of the metals, the upper, the more electronegative metal,* (*Here the term of 'electronegative' means the metal possessing high electrolytic solution pressure and going into the solution with the formation of positive ions. Some authors preferred to use 'electropositive' instead of 'electronegative', referring to the ions which are electropositive during dissolution.) will displace the lower, the more electropositive one, …

Evaluation Of Quenching Media Using The End-Quench Hardenability Test, Subodh C. Das Gupta

Masters Theses

"The purpose of the thesis was to evaluate the quenching speed of different quenching media by studying their behaviour in relation to hardenabilities of steels, using the standard A.S.T.M. End-quench Test. At the outset an understanding of the term "Hardenability", so extensively used in industrial heat-treatment, is necessary, The property of a steel, of hardening on quenching to various depths beneath the surface is referred to as the 'Hardenability". It may simply be called the "susceptibility to hardening". Hardenability should be distinguished from the "Hardening capacity", which represents the magnitude of the hardness achieved. The chief factors which affect the …

A Study Of The Gelation Of Air-Setting Refractory Mortars, James Irving Mueller

Doctoral Dissertations

"Three basic mortar formulae were used in this investigation, each mix having some different materials present and each having its own gelling characteristics. The study was directed along the theory that the dry materials used play an important part in the hardening. Certain admixtures were tested and several were found to improve the workability after storage. The presence of additional sodium ions in the mortar was found to be helpful in overcoming the gelation but these tended to lower the refractoriness of the mortar.

A study was made of the base exchange capacities of the dry materials and the material …

Geology And Geological Structure Of The Alberta And Saskatchewan Plains, William E. Topley

Bachelors Theses and Reports, 1928 - 1970

Alberta, responsible for ninety per cent of Canada's output, had, by 1947 entered into her fifth year of production decline. Only ten per cent of Canada's oil requirements were secured from home fields. Ninety per cent had to be imported, mainly from the United States. How long could imports be maintained on present levels? During the year, the United States had started rationing; in one sector of its domain. Would this become general? If so, what was the answer for Canada?

The Fort Union Formation Of Montana And Adjacent Areas, Charles Christman

Bachelors Theses and Reports, 1928 - 1970

The Fort Union formation is one of the most import­ant and best known geologic formations of the northern Great Plains, and is found lying almost horizontal at the surface over large areas in this region.

Manganese Oxide Deposits Near Butte And Development Since 1942, Emmett M. Gilmore

Bachelors Theses and Reports, 1928 - 1970

The manganese minerals occur in the peripheral zone of the Butte district with quartz in veins, which at depth contain galena and sphalerite closely associated with silver-bearing minerals. The manganese oxides are all oxidation products formed by weathering of primary rhodochrosite or rhodonite.

Concentration Of Manganese Dioxide From Philipsburg, Montana, W. M. Mcauliffe

Bachelors Theses and Reports, 1928 - 1970

Imports of manganese ore probably supply a major proportion of the needs of the United States. Domestic production is reported to be higher than pre-war levels, but does not equal that of the peak production year of 1943. In 1946, the Anaconda Copper Mining Company ac­counted for 90 percent of the total shipments of mangan­ese nodules, and this company is the largest producer of domestic metallurgical ore in the United States.

A Mineral Dressing Study Of The U.S. Grant Ore, John Emmett Murphy

Bachelors Theses and Reports, 1928 - 1970

This investigation concerns the development of a satis­factory method or extracting or concentrating gold and silver from the ores of the U. S. Grant Mine. The choice between applying an extractive process and one by which the valuable mineral constituents are concentrated depends on more than one factor.

Karst Kamp Asbestos Deposits Gallatin County, Montana, Thomas L. Wilson

Bachelors Theses and Reports, 1928 - 1970

Karst Kamp, a southwestern Montana recreation re­sort, is 32 road miles south of Bozeman on the east bank of the Gallatin River in a narrow V-shaped valley flanked on the west by the rugged Madison mountain range and on the east by the equally rough Gallatin range. The asbestos deposit itself lies approximate­ly one-half mile northwest of the ranch on a heavily timbered "Al­pine-like" slope nearly 1200 feet above the floor of the valley.

Geology And Ore Deposits Of The Salt Chuck-Rush And Brown Mine Area Prince Of Wales Island, Alaska, Judson H. Whitman

Bachelors Theses and Reports, 1928 - 1970

The Salt Chuck, Rush and Brown, and adjacent mines and claims form an area of approximately 15 square miles near the head of Kasaan Bay about 10 miles northwest of the village of Kasaan on Prince of Wales Island in southeastern Alaska. It is an area of moderate relief in which the hills rise from the water’s edge to heights of some 500 feet. Most of the area is covered with dense vegetation and muskeg.

A Discussion Of The Geology And An Isopach Map Of The Pennsylvanian System In Wyoming And Adjacent Areas, B. R. Alto

Bachelors Theses and Reports, 1928 - 1970

Pennsylvanian strata in Wyoming and adjacent areas have been the subject of much work and discussion. Most of the work has been due to the economic importance of the system as an oil producer in this region. Oil production from strata of Pennsylvanian age is rather recent history; and therefore, much of the available information is local­ized and incomplete.

Sandstones Of The Lance And Fort Union Formations, Alan G. Conner

Bachelors Theses and Reports, 1928 - 1970

The Fort Union and Lance formations are widespread terrestrial sediments exposed in Montana, North Dakota, South Dakota, Wyoming, and Canada. Their stratigraphic position, especially that of the Lance, has long been in doubt, and has provoked much controversy among geologists.

Flotation Concentration Of A Montana Lead-Zinc-Silver-Ore, Grover W. Gregson

Bachelors Theses and Reports, 1928 - 1970

The Mike Horse mine, in the Huddelston mining district, is fifty-two miles northwest of Helena, Montana. The mine was discovered in 1898 by Joseph Heitmiller. There was only minor production from the date of discovery until 1915; the main drawback being lack of good road.

The Geology And Mineral Deposits Of British Columbia, John A. Downing

Bachelors Theses and Reports, 1928 - 1970

The province of British Columbia, with an area of 359,279 square miles, includes a large part of the Canadian Cordillera that is the western mountains of Canada. It is the leading province of Canada in the production of lead, zinc, and silver, and third among the provinces in the output of gold, copper, and coal.

The Continuous Electrodeposition Of Manganese, Joseph W. Joyce

Bachelors Theses and Reports, 1928 - 1970

The object of this research was to produce a workable electrolytic cell for the continuous deposition of manganese from aqueous sulphate solutions and determine the critical factors in its oper­ation.

The Physiographic History Of Western Montana And Northwestern Idaho, John R. Kavanagh

Bachelors Theses and Reports, 1928 - 1970

Millions of years of physiographic changes have conditioned us to the fact that our present drainage is a temporary feature. Rivers once flowing opposite to their present direction is not an unusual condition for physiographers to suggest.