Digital Commons Network^™

Impact Of Repeated Washing Cycles On Surface Integrity And Mechanical Properties Of Glass Bottles, Siwat Patamakam Mr., Thitisilp Kijchavengkul, Siriyupa Netramai, Gong Yaijam

Journal of Applied Packaging Research

Glass bottles are a top choice in the global beverage industry, but their inherent brittleness poses challenges in maintaining durability. This study focused on investigating the impact of numbers of washing processes from reusing on the surface quality and mechanical properties of glass bottles after each washing cycle. Contact angle technique was used to determine surface quality of glass bottles. It was found that mechanical integrity, as reflected in internal pressure resistance values, and surface quality of glass bottles exhibited an exponential decline with each washing cycle. Furthermore, a predictive model (R² = 0.8882) was developed to estimate its …

Compositionally Complex Diborides: Competing Solubility During Sintering And Properties, Laura Silvestroni, Carlo Baldisserri, Jacopo Matteo Tabaglio, Nicola Gilli, Jeremy Watts, Steven M.I. Smith, Gregory E. Hilmas, William G. Fahrenholtz

Materials Science and Engineering Faculty Research & Creative Works

An ultra-high temperature ceramic based on ZrB2, TiB2, and SiC was hot pressed to full density at 1850 °C. Addition of 5 vol% of different metal-compounds, in the form of HfC, VC, NbC or CrB2, increased the densification temperature to 1910 °C. The resulting compositionally complex ceramics had homogeneous microstructures with boride grains exhibiting core-shell features. The shell was a solid solution containing variable amounts of the three metals. Notably, TiB2 remained as a discrete phase in the reference material and in the presence of the V- and Cr- based additions, whilst it dissolved into the main ZrB2-based grains for …

Numerical Simulation Of Heat Transfer In Self-Propagating High-Temperature Synthesis (Shs)-Based Calcination Of Limestone, Sayee Srikarah Volaity, Shubham Agrawal, Srinivas Kilambi, Patrick Phelan, Aditya Kumar, Narayanan Neithalath

Materials Science and Engineering Faculty Research & Creative Works

Calcination of limestone, a high temperature (∼900 °C) process that emits 44 % of the mass of limestone as CO₂, is a critical process in the production of many industrially important materials. To soften the CO₂-related impacts of traditional calcination, and to enable ultrafast synthesis of lime, a novel approach based on self-propagating high-temperature synthesis (SHS) has been put forward. SHS uses exothermic heat released by the combustion of fuel intermixed with the reactants to advance the reaction, and hence requires the provision of lower external temperatures. This study introduces a microstructure-guided modeling approach to understand …

Effects Of Wetting Events On Mass Timber Surface Microbial Communities And Voc Emissions: Implications For Building Operation And Occupant Well-Being, Gwynne Á. Mhuireach, Susan Collins, Leslie Dietz, Patrick Finn Horve, Aurélie Laguerre, Dale Northcutt, Jason Stenson, Kevin Van Den Wymelenberg, Elliott Gall, Mark Fretz

Mechanical and Materials Engineering Faculty Publications and Presentations

IntroductionHumans have used wood as a construction material throughout history. Currently, mass timber products, such as cross-laminated timber (CLT), are becoming more popular as a structural material, since they are renewable and have a lower carbon footprint than concrete or steel. Nonetheless, some building types, such as healthcare, veterinary, and food manufacturing, avoid using structural mass timber due to concerns about microbial growth in the event of wetting. One solution is to use protective coatings on mass timber products to increase moisture resistance, although the coatings themselves may generate concerns about volatile organic compound (VOC) emissions. Natural uncoated wood also …

Atomistic Simulations Of Shape Memory Behavior And Negative Poisson's Ratio Effect Of Liquid Crystal Elastomers, Nanang Mahardika

Student Research Symposium

• LCEs are suitable materials for soft robotics application because it is programmable, responsive to various stimuli and has flexibility.

2024, A Landmark Year For Climate Change And Global Carbon Capture, Utilization, And Storage: Annual Progress Review, Shangli Shi, Yun Hang Hu

Michigan Tech Publications

This annual review outlines the progress of carbon capture, utilization, and storage (CCUS) technologies in 2024. As human-induced CO2 emissions continued to rise, the year presented critical challenges. Notably, 2024 was the hottest year on record and the first in which global temperatures exceeded preindustrial levels by more than 1.5°C, driving intensified efforts to advance CCUS. Scientific interest in CCUS grew significantly, with the annual number of related publications increasing by 11.4% compared to 2023, reaching 53,970. The total number of operational commercial CCUS facilities also expanded, rising by 16.3% to a total of 50. In the political area, governments …

Fabrication Of Ultra High-Temperature Compact Heat Exchanger By Extrusion-Based Ceramic Additive Manufacturing, Abid Hasan Rafi, David W. Lipke, Jeremy Lee Watts, Greg Hilmas, Ming-Chuan Leu

Miners Solving for Tomorrow Research Conference

No abstract provided.

Physical Characterization Of Copper Anode Slimes, Carter Glynn, Michael S. Moats

Miners Solving for Tomorrow Research Conference

No abstract provided.

Sustainable Solutions To Eutrophication: The Role Of Glass Fertilizers, Lucas Greiner, Charmayne Lonergan

Miners Solving for Tomorrow Research Conference

No abstract provided.

Additive Manufacturing Of Thermoplastic Composites, Matik Heskin, K. Chandrashekhara, Richard Billo, Ming-Chuan Leu, Thomas P. Schuman

Miners Solving for Tomorrow Research Conference

No abstract provided.

Microstructural Evolution Of High-Entropy Carbide Ceramics, Elizabeth Pritchett, William Fahrenholtz, Greg Hilmas, Steven Smith

Miners Solving for Tomorrow Research Conference

No abstract provided.

Polymerization Methods For Vinyl Phosphonate Monomers: Challenges And Perspectives, Sara Mccauley

Miners Solving for Tomorrow Research Conference

No abstract provided.

Preliminary Assessment Of Non-Volatile Particulate Matter And Gaseous Emissions From A Premixed Pre-Vaporized Combustor Designed For Civil Supersonic Transport, Ugochukwu Ewuzie, Godwin Ifeanyi Ogbuehi, Steven Achterberg, Monday Uchenna Okoronkwo, Philip D. Whitefield

Miners Solving for Tomorrow Research Conference

No abstract provided.

Innovative Design Methodology For Durable Open-Graded Friction Course Asphalt Mixtures, Anas Abualia

LSU Doctoral Dissertations

Open-graded friction course (OGFC) is a thin asphalt mixture surface layer with a high percentage of coarse aggregates and high interconnected air voids, which provides improved skid resistance, visibility, and decreased pavement-tire noise. However, construction personnel at DOTD reported that conventional OGFC mixtures have short service life (raveling distress). Further, their structural contribution to the pavement structure is commonly neglected and designed only for functionality purposes.

The objective of this study was to develop a rational mix design methodology to improve the durability of OGFC asphalt mixtures. Specific objectives are to: (1) conduct a rheological and chemical characterization of polymer-, …

L.G. Twidwell Fifty-Six Years Of Research A Summary, Larry G. Twidwell

Metallurgical & Materials Engineering

Larry G. Twidwell, D.Sc. is Emeritus Professor in the Department of Metallurgical and Materials Engineering at Montana Technological University. He has fifty-six years of experience in teaching and directing research in Metallurgical and Materials Engineering at Montana Tech. Twidwell and his graduate students and coworkers have conducted research emphasizing extractive metallurgy and the application of extractive metallurgical engineering to the treatment of metallurgical wastes, process waters and byproducts. Four books, seventy-seven M.Sc. theses, one-hundred-thirty refereed publications and one hundred-eight national and international presentations have resulted from their research efforts. Twidwell has received several outstanding teacher/researcher awards during his tenure at …

Computational Modeling Of Astrophysical Systems, Leleya Iris Stallard

Spring Showcase for Research and Creative Inquiry

This research project focuses on the computational modeling of astrophysical systems using Femap with NX Nastran. The goal was to simulate and analyze the vibrational behavior and structural deformation of celestial bodies under different material compositions and collision conditions. Materials such as iron, granite, titanium, and models for white dwarf stars were used to investigate how varying physical properties affect the systems' dynamic responses. Both isotropic and anisotropic models were created to represent realistic astrophysical materials. Through static and modal analyses, the study explored how internal structure and material stiffness influence the reaction of celestial objects to applied forces and …

A High-Temperature Lithium-Aluminum Alloy/Oxygen Or Air Fuel Cell, Sarwan S. Sandhu

Chemical and Materials Engineering Faculty Publications

This paper is in support of our current effort in the development of an experimental hybrid (lithium- aluminum alloy/electrolyte/oxygen or air) fuel cell for the acquisition of the experimental data required to characterize its performance behavior. The literature-based assembled formulation provided in this paper can be used to predict the cell open-circuit electric potential, lithium amount in the cell anode alloy, and g-atom ratio of lithium to aluminum in the cell anode as a function of time at any cell discharge current level. The ohmic voltage losses can also be computed in the cell cathode, anode, and two electrolytes at …

Data-Driven Decision Making For Quality Control In Foundry Applications, Ronit Shetty

Dissertations

In the transformative landscape of Industry 4.0, advanced quality control in manufacturing demands innovative methods for processing and analyzing datasets. This dissertation presents a comprehensive study on leveraging high volume data and machine learning to enhance decision making in the foundry industry. The research explores three crucial challenges in the foundry industry: predicting surface roughness, monitoring refractory coating thicknesses, and comparing feature extraction techniques for surface quality classification. The findings underscore the transformative potential of integrating advanced feature engineering techniques and machine learning into manufacturing quality control.

The first of the three challenges introduces a framework that integrates digital images …

Characterization Of Cure And Temperature Dependent Properties Of Filament Wound Composite Structures, Aaron Riley Sinkler

Mechanical & Aerospace Engineering Theses & Dissertations

Residual stress development in filament wound composites presents a critical challenge for the fabrication of thick composite structures exposed to elevated temperatures during operation. This study focused on determining temperature and cure dependent material properties to aid in understanding the residual stress build-up during the cure. Material characterization of a filament wound composite materials was performed by investigating thermo-chemical shrinkages in resin, lamina, and bi-lamina configurations. The coefficient of thermal expansion (CTE) of both the neat resin and the fiber was measured, and the gel point and chemical shrinkage of the neat resin were investigated. A filament wound unidirectional laminate …

Mechanochemical Reaction Kinetics—A Theoretical Modeling And Experimental Study, Maria Dolores Masso Ramirez

Mechanical & Aerospace Engineering Theses & Dissertations

Mechanochemical reactions represent a class of chemical processes triggered by mechanical energy, widely recognized for their efficiency, solvent-free nature, and environmental benefits. They are increasingly applied in synthetic chemistry, a branch of science focused on creating new chemical compounds through controlled laboratory reactions. However, the mechanisms underlying mechanical activation remain poorly understood, primarily due to the difficulty in quantifying energy transfer during milling, where solid reactants are ground together using a ball mill. This thesis aims to bridge the gap in understanding the relationship between mechanical parameters and reaction kinetics by developing and validating a theoretical framework based on dimensional …

Turbulence Numerical Simulation Of Flow Characteristics Of Laval Nozzle Top Blow Jet, Ai Liang Chen, Yao Liu, Zi Biao Wang, Huan Wu Zhan, Xue Xian Jiang, Feng Long Sun, Jiann Yang Hwang, Xi Jun Zhang

Michigan Tech Publications

The turbulent characteristics of the top-blown Laval nozzle and the influence of pressure and Mach number were studied through numerical simulation. With 2.72% error between the results and the empirical formula, the results are reliable. Nozzle fluid is influenced by pipe structure, causing pressure and density to drop as speed increases. Differences in pressure and velocity between the jet and surrounding gas lead to jet velocity attenuation, flow expansion, deflection, and eddy currents. The optimal top blowing pressure is 0.6 MPa, and the center velocity and width of the jet are 345 m/s and 0.124 m, respectively, at 20De (De …

Underlying Mechanisms Of The Effect Of Microfines Of Manufactured Sand On Non-Linear Structural Build-Up Of Cement Paste, Jiang Zhu, Jiaping Liu, Kamal H. Khayat, Xin Cheng, Wei Zhao, Zhen Li, Xin Shu, Yongbo Huang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The rheological properties of cement-based materials made with manufactured sand vary with the content and physio-chemical properties of microfines in the sand. However, the evaluation of rheological properties regarding the structural build-up at early-age hydration remains challenging for the cementitious materials prepared with different manufactured sands, due to complicated underlying structuration mechanisms. This paper studies the effect of disparate microfines of different manufactured sands on the non-linear growth of static yield stress of cement pastes at rest. The paste mixtures were prepared with 0.40 and 0.275 water-to-cement mass ratio (W/C) and had a fixed mini-slump flow of 240 ± 5 …

Understanding Firn Dynamics: Modeling And Microstructure From East Antarctica, Ilyse Horlings

Dartmouth College Ph.D Dissertations

Glacier ice is formed from the accumulation of snow and its compaction through a transitional material called firn. Firn dynamics are fundamentally influenced by climatic factors, such as temperature and snow accumulation rate, and so are crucial for understanding a number of cryospheric applications. For example, ice-sheet mass loss contributions to sea-level rise from repeat satellite-altimetry observations depend on calculating firn density and its evolution. Past atmospheric gases in ice core bubbles are often younger than the surrounding ice, and their exact age depends on how firn closes off interconnected pores to become impermeable. Models often estimate bulk properties, such …

Josephson Junctions: Fabrication And Applications For The Axion Dark Matter Experiment, Jonah M. Sachs

Senior Honors Papers / Undergraduate Theses

The observation of axions could revolutionize the world of physics. Through microwave frequency cavity readout of the photons associated with these axions, the ADMX project at WashU utilizes multiple different forms of the Josephson junction (JJ), a superconductive circuit element. The physics behind the JJ are essential to understanding its operation for resonant cavity readout in addition to parametric amplification. Parametric amplifiers produced using JJs can approach the signal-to-noise ratio set by quantum mechanics, and prove essential for the amplification chain used by the ADMX experiment for axionic detection. The limits of these amplifiers are set by the noise tuning …

Effects Of High Temperature Compaction On 3d Printed Carbon Fiber Reinforced Polymer Composites, John D. Barber

Mechanical & Aerospace Engineering Theses & Dissertations

The aim of this dissertation was to study the effects of hot temperature compaction (HTC) upon the polymorphism and the mechanical behavior of an additively manufactured (AM), carbon fiber reinforced polyamide (PA6). Different pressure and temperature levels during HTC were tested to determine the overall effect upon the mechanical behavior and the material crystalline composition. Treated, carbon fiber reinforced PA6 samples were analyzed using differential scanning calorimetry, x-ray diffraction, thermogravimetric analysis, scanning electron microscopy, double cantilever beam testing and three-point bending testing. When considered with respect to as-printed samples, an HTC temperature of 190°C combined with 80 psi pressure resulted …

Bismuth Cuprates Produced By Solar Energy Showing Anomalous Resistance, Dilbara Dj. Gulamova, Sirojiddin Z. Mirzaev, Sirojiddin Kh. Bobokulov, Timur I. Gulamov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to obtain bismuth superconducting cuprates with higher superconducting properties. The advantages of superconducting materials in power engineering, disadvantages of synthesis based on solid-phase and melt principles, and the prospect of using nontrivial methods to obtain high critical parameters are presented. The advantages of synthesis under the influence of concentrated solar energy are shown. In order to obtain a superconductor with high critical properties, a massive, long-term stable bismuth cuprate was synthesized using solar technology. It pushes out an external magnetic field and has a nanostructured layered microstructure with caverns containing submicron-sized particles. The phase …

Modern Ir-Spectroscopic Methods For The Analysis Of Hydroxybenzene-Methanal Resin Obtained On The Basis Of 2,5-Furandion, Sherali Anvarovich Umarov, Ravshan Israilovich Ismailov Ismailov

Technical science and innovation

The chemical changes occurring during the synthesis of hydroxybenzene-methanal resins obtained on the basis of 2,5-furandion under various ratios and temperature conditions were investigated using the IR spectroscopic method. Analysis of the compositional changes in the resin during the production of the thermoreactive resin revealed that the content of hydroxyl groups (~3300–3500 cm⁻¹) decreased, while the aldehyde groups (~1700–1750 cm⁻¹) increased; moreover, the presence of ether groups (~1050–1150 cm⁻¹) indicated that the process was successful. The synthesis of resins based on thermoreactive hydroxybenzene-methanal resins was carried out at high temperatures (70°C, 80°C, 95°C). During the identification of the functional groups …

Scalable Mxene-Based Textile Supercapacitors, Abaigeal Aydt

Honors Program: Senior Projects (Public)

The demand for flexible and wearable energy storage devices for portable applications has led to the exploration of textile-based supercapacitors (TSCs). TSCs will allow for the creation of a new class of energy harvesting and storing technology directly into our clothing and will require using non-toxic and/or biocompatible materials. This will result in a greener and more sustainable path to address the challenges at the nexus of energy, mobility, and sustainability. To fabricate a TSC, a yarn made of fibers, such as wool or cotton, is coated with MXene flakes; MXenes are composed of transition metal carbides, nitrides, or carbonitrides …

Recent Advances In Non-Enzymatic Electrochemical Sensors For Theophylline Detection, Gustria Ernis, Yulia M T A Putri, Muhammad Iqbal Syauqi, Prastika Krisma Jiwanti, Yeni Wahyuni Hartati, Takeshi Kondo, Qonita Kurnia Anjani, Jarnuzi Gunlazuardi

Journal of Electrochemistry

Detection of target analytes at low concentrations is significant in various fields, including pharmaceuticals, healthcare, and environmental protection. Theophylline (TP), a natural alkaloid used as a bronchodilator to treat respiratory disorders such as asthma, bronchitis, and emphysema, has a narrow therapeutic window with a safe plasma concentration ranging from 55.5–111.0 μmol·L^–1 in adults. Accurate monitoring of TP levels is essential because too low or too high can cause serious side effects. In this regard, non-enzymatic electrochemical sensors offer a practical solution with rapidity, portability, and high sensitivity. This article aims to provide a comprehensive review of the recent developments …

Exploring Corona Discharge In Electrostatic Printing For Electronics And In Other Application, Zijian Weng

USF Tampa Graduate Theses and Dissertations

The field of printed electronics (PEs) is expanding rapidly, driven by increasing market demand. According to reports, the global market for PEs is expected to reach $23 billion by 2026, with a compound annual growth rate of 18.3% from 2023 to 2028. This growth necessitates the development of innovative printing technologies that can meet these demands efficiently, delivering high-quality, high-resolution PEs suitable for applications in health, environmental monitoring, sports, aerospace, and more.

Currently, PEs manufacturing relies on two main groups of printing technologies. Contact printing methods offer high-speed production but struggle with precision, while non-contact methods provide high resolution but …