Digital Commons Network^™

Advances In Noninvasive Imaging For Detecting Radiation-Induced Lung Injury (Rili), Austen Nissen, Said H. Audi, Anne V. Clough, Brian Fish, Amit Joshi, Meetha Medhora, Jason Walter Sidabras, Heather A. Himburg

Biomedical Engineering Faculty Research and Publications

Purpose: Dr. Richard Hill performed pioneering work in the field of radiation-induced normal tissue injury to the lung including noninvasive imaging studies aimed at identifying imaging biomarkers of radiation-induced lung injury (RILI). RILI is a life-threatening toxicity of radiation exposure relevant to both cancer patients undergoing thoracic radiation therapy (RT) and victims of accidental radiation exposure. The ability to detect RILI noninvasively has the potential to guide treatment planning for RT and, in the case of victims of acute radiation exposures, inform the decision to start mitigative therapies. As part of this special issue of IJRB honoring Dr. Hill’s many …

Designing A Portable And Accessible Diffuse Reflectance Spectroscopy System For Real-Time Detection Of Cervical Intraepithelial Neoplasia, Allison Scarbrough, Diana Moses, Tongtong Lu, Bing Yu

Biomedical Engineering Faculty Research and Publications

Significance: Over 80% of cervical cancer cases occur in lower-to-middle income countries (LMIC’s). This is partly because current screening techniques lack affordability, accessibility, and/or reliability for use in LMIC’s.

Aim: To develop an optical technique for cervical cancer screening that is affordable, accessible, and reliable for use in LMIC’s.

Approach: We developed a portable diffuse reflectance spectroscopy (DRS) system, which costs < $2500 USD to manufacture, and employs a Raspberry Pi to extract the absorption (μ_a) and reduced scattering (μ'_s) coefficients of biological tissue. The system was subject to travel and intentional rough handling. It was further used to capture 320 DRS spectra taken from 64 tissue-mimicking phantoms. Two …

Nasa Design And Analysis Of Pegda Hydrogels For Microgreen Cultivation In Space, Kelly Wu, Gabriel Antigua, Artur Abramyan

Publications and Research

With the growth of the space economy worldwide, sustainable and soil-less food systems for long-duration space missions become increasingly important. In this study, Polyethylene Glycol Diacrylate (PEGDA) hydrogels were experimented with as a biocompatible medium in arugula microgreen growth without utilizing soil. Among the most considerable challenges was the fact that the plants' root growth exceeded the hydrogel capacity, which caused seedling dislodgment and starvation. To combat this, computer-aided design (CAD) was utilized to 3D print different mold designs to try and control root development further. The most promising of these designs were coil and tree-branch molds, promoting lateral or …

Research On Technology Opportunity Identification By Integrating Technology Attribute Analysis And Competitive Environment Scanning —— A Case Study Of Industrial Robots, Daobin Gao

Journal of Scientific Information Research

[Purpose/significance] Placing technology opportunity identification in the perspective of technology attribute analysis and competitive environment scanning provides intelligence support for enterprises to select technology opportunities and formulate technology competitive strategies in complex and changing market competition environments.

[Method/process] Using patents as the data source, first, the BERTopic model is used to explore potential technical topics, Secondly, starting from the technical attributes, and from both global and local perspectives, we propose indicators of technical importance and technical attention, and use their cross screening to select candidate sets of technical opportunities, Finally, a market competition intensity index that takes into account market …

Analysis Of Vision Transformers And Domain Adaptation In Long-Range Facial Recognition, Zachary Michael Swanson

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

Atmospheric turbulence presents a significant barrier to long-range facial recognition, introducing severe geometric distortions and blur that degrade image quality. This thesis investigates deep learning approaches for mitigating these effects, with a focus on transformer based architectures and domain adaptation strategies.

An in-depth benchmarking study was performed using convolutional neural networks (CNNs) and vision transformers (ViTs) on the Husker BRIAR Research Collection from up to 500m (HBRC-500) face dataset. The results demonstrated that vision transformers, particularly hierarchical vision transformers like the shifted-window (Swin) transformer, outperform CNN-based models at long distances due to their ability to model global spatial relationships and …

An Exponential Cone Integer Programming And Piece-Wise Linear Approximation Approach For 0-1 Fractional Programming, Hoang Giang Pham, Thuy Anh Ta, Tien Mai

Research Collection School Of Computing and Information Systems

We study a class of binary fractional programs commonly encountered in important application domains such as assortment optimization and facility location. These problems are known to be NP-hard to approximate within any constant factor, and existing solution approaches typically rely on mixed-integer linear programming or second-order cone programming reformulations. These methods often utilize linearization techniques (e.g., big-M or McCormick inequalities), which can result in weak continuous relaxations. In this work, we propose a novel approach based on an exponential cone reformulation combined with piecewise linear approximation. This allows the problem to be solved efficiently using standard cutting-plane or branch-and-cut procedures. …

Towards Efficient Privacy-Preserving Deep Learning: He-Friendly Structures, Flexible Pruning, He-Efficient Architectures, And Secure Transformer Token Drop, Yifei Cai

Electrical & Computer Engineering Theses & Dissertations

Deep learning (DL) has become a powerful tool for solving complex problems, but developing DL models typically requires vast datasets, high computational resources, and expert knowledge—barriers that limit accessibility. Machine Learning as a Service (MLaaS) addresses this challenge by allowing resource-rich providers to deliver pre-trained DL models as services. However, privacy concerns arise: clients hesitate to share sensitive data, while providers protect their proprietary models. To address this, privacy-preserving MLaaS integrates cryptographic techniques into DL computations, as seen in frameworks like Cryptonets, SecureML, GAZELLE, CrypTFlow2, Cheetah, and BOLT. Among them, Homomorphic Encryption (HE) enables computation on encrypted data but remains …

Advanced Study Of Nickel-Titanium Alloy: Effects Of Point Defects On Mechanical And Thermodynamic Properties, Diego Armando Juarez Rosales

Open Access Theses & Dissertations

High-throughput first-principles calculations of point defects are emerging as a powerful tool to accelerate materials discovery in applications [1]. Substitutional, antisite, and vacancy defects can play an important role in the mechanical and thermal properties of intermetallic alloys [2]. In this present work I compute the thermal and mechanical properties of shape-memory alloy nickel-titaniun (NiTi) in the B19â?? martensitic and B2 austenitic phases from molecular dynamics (MD), using a second nearest neighbor (2NN) modified embedded atom method (MEAM) [3] classical potential in the temperature range from 200K to 600K and composition range from 45 atomic percent to 55 atomic percent …

Investigation Of The Effect Of Material Density And Particle Size On Mixed Powder Spreading Behavior In Powder Bed Fusion Process, Alfred Kofi Apianing Achenie

Theses and Dissertations

Powder spreading marks a crucial step in the Laser powder bed fusion process, directly impacting the powder bed uniformity and paving the way for subsequent stages in the process. The laser powder bed fusion process depends heavily on the composition of the metallic powder feedstock. While most existing studies focus on pre-alloyed powders, limited work has explored the use of elemental powder blends as feedstock as used in in-situ alloying. Pre-alloyed powders are often costly, exhibit irregular morphologies and offer limited flexibility in material selection. This study uses Discrete Element Method (DEM) simulations to investigate how variations in material density …

Redundant Functions Of Mir156-Targeted Squamosa Promoter Binding Protein-Like Transcription Factors In Promoting Cauline Leaf Identity, Darren Manuela, Liren Du, Qi Zhang, Yifei Liao, Tieqiang Hu, Jim P. Fouracre, Mingli Xu

Faculty Publications

No abstract provided.

Performance Enhancement In Rewound Industrial Retrofit Solutions For Five- And Six-Phase Permanent Magnet Assisted Synchronous Reluctance Machines, Kotb B. Tawfiq, Ayman M. El-Refaie, Peter Sergeant, Hatem Zeineldin, Ahmed Al-Durra, Ehab F. El-Sadaany

Electrical and Computer Engineering Faculty Research and Publications

This paper investigates upgrading aging three-phase Permanent Magnet Assisted Synchronous Reluctance Machines (PMaSynRMs) into multiphase configurations—specifically six- and five-phase windings—without modifying the existing stator or rotor laminations. This retrofit supports circular economic principles by extending machine life and reducing material waste and cost. Four configurations are examined: the original three-phase winding, asymmetrical six-phase winding, symmetrical six-phase winding, and five-phase winding. The feasibility of rewinding existing three-phase stators is explored for different slot/pole combinations. Balanced rewound five-phase windings are feasible only when the stator's slot/pole ratio is greater than or equal to 9. Both symmetrical and asymmetrical rewound six-phase windings are …

Identification Of Authentic Gnss Signals In Time-Differenced Carrier-Phase Measurements With A Software-Defined Radio Receiver, Zhen Zhu, Sanjeev Gunawardena, Eric Vinande, Jason Pontious

Faculty Publications

The time-differenced carrier phase can be computed from measurements recorded by a multi-global navigation satellite system software-defined radio receiver such as PyChips, from which the user displacement and receiver clock drift can be solved. PyChips is able to simultaneously track authentic and inauthentic signals in separate channels, which makes it possible to observe both types of measurements with corresponding navigation data. A random sample consensus algorithm has been introduced to assess the consistency between the measurements and data. This algorithm successfully separated authentic channels from inauthentic channels when they are broadcast simultaneously.

Distinctive Transpassivation Behavior And Characteristics Of Passive Films Of Laser Powder Bed Fusion Produced And Annealed Ti–6al–4v In Hank's Solution, Yi Fan Zhang, Liang Yu Chen, Ze Xin Wang, Hong Yu Yang, Maksym Bobrov, Dobuvyy Oleksandr, Yong Liu, Lai Chang Zhang

Research outputs 2022 to 2026

Passivated Ti alloys typically demonstrate enhanced corrosion resistance due to the formation of passive films. Intriguingly, in comparison to the annealed Ti–6Al–4V, laser powder bed fusion (LPBF) produced Ti–6Al–4V exhibits significantly attenuated transpassivation behavior in Hank's solution. This work investigated the electrochemical responses of both samples before and after the transpassivation region to illustrate the underlying mechanism for the phenomenon. In the passivation region, both samples displayed analogous passivation behavior, with the annealed and LPBF-produced Ti–6Al–4V having the current densities of 6.64 × 10⁻⁶ and 8.14 × 10⁻⁶ A cm⁻² at 1 V, respectively. Between 1.5 V …

Performance Of Interrupted Minichannel Heat Sink Using Various Coolant Fluids, Ernie Mat Tokit, Mohd Zamri Yusoff, Hussein A. Mohammed

Research outputs 2022 to 2026

The advancement in the micro electro mechanical system, MEMS, had been utilized for several years before. This embarked on the compact and high density of power generation for tiny devices. This led to the development of a heat dissipating system for high-power-density devices. Hence, the work intends to simulate the fluid flow performance of interrupted minichannel heat sinks due to the redeveloping and interrupting of the boundary layer merging in previous work that augments the heat dissipation. The study is conducted through numerical work of laminar steady flow, by governing the Navier-Stokes and energy equation. Three interrupted minichannel heat sinks …

A Comparative Study Of The Pullout Strength Of Geostraps And Geogrids In Reinforced Soil, Kshitij Gaur, Ashutosh Trivedi, Sanjay Kumar Shukla

Research outputs 2022 to 2026

The sustainable development of geotechnical infrastructure necessitates using durable, efficient, and environmentally resilient reinforcement materials. This study investigates the pullout performance of geostraps to assess their potential as a sustainable alternative to conventional geosynthetics. This study focuses on the pullout performance of geostraps, flexible, polymeric reinforcement materials. There has not been a thorough study of their pullout resistance, which directly affects the stability and durability of reinforced soil structures. Pullout tests were conducted on sandy soil in a controlled environment. The experimental findings from the pullout test were then validated in a numerical model. The model was used to determine …

A Study On The Multifunctional Properties And Application Perspectives Of Zno/Sic Composite Materials, Mohammad Nur-E-Alam

Research outputs 2022 to 2026

ZnO/SiC nanocomposite materials possess significant potential for various technological fields due to their extraordinary optical, electrical, thermal, and mechanical properties. The synthesis methods, material properties, and diverse applications of ZnO/SiC composites have been systematically explored in this study. The potential application areas of this nanocomposite include their roles in photocatalysis, optoelectronic devices, gas sensors, and photovoltaic systems. The synergetic effects of ZnO and SiC are analyzed to highlight their advantages over their individual components. Future research directions must focus on the remaining challenges to optimize these nanoscale composite materials for industrial and emerging applications.

Decentralised Consensus Control Of Hybrid Synchronous Condenser And Grid-Forming Inverter Systems In Renewable-Dominated Low-Inertia Grids, Hamid Soleimani, Asma Aziz, S. M.Muslem Uddin, Mehrdad Ghahramani, Daryoush Habibi

Research outputs 2022 to 2026

The increasing penetration of renewable energy sources (RESs) has significantly altered the operational characteristics of modern power systems, resulting in reduced system inertia and fault current capacity. These developments introduce new challenges for maintaining frequency and voltage stability, particularly in low-inertia grids that are dominated by inverter-based resources (IBRs). This paper presents a hierarchical control framework that integrates synchronous condensers (SCs) and grid-forming (GFM) inverters through a leader–follower consensus control architecture to address these issues. In this approach, selected GFMs act as leaders to restore nominal voltage and frequency, while follower GFMs and SCs collaboratively share active and reactive power. …

Ac Electric Fields Manipulate And Concentrate Dna Molecules On Electrodes, Akila Wijesinghe, Dharmakeerthi Nawarathna

Graduate Student Government Association Research Conference

Point-of-care (POC) electric field-based biosensors have emerged as a promising tool to detect early cancer biomarkers such as circulating tumor DNA (ctDNA), microRNA (miRNA), and proteins. To be effective in screening in clinical settings, these biosensors must be simple and easy to use. In this study, we have studied the manipulation of short DNA molecules suspended in a sessile drop to achieve this goal. Alternative current (AC) electric fields were used to polarize DNA molecules and produce dielectrophoretic (DEP) force on DNA molecules. DEP force is used to manipulate polarized DNA molecules towards the higher electric field gradients (toward the …

The Utilization Of Basic Oxygen Furnace Slag As Fine Aggregates In Concrete: Physical, Mechanical, And Durability Properties, Hakan Ozkan

Journal of Sustainable Construction Materials and Technologies

This study examines the feasibility of using basic oxygen furnace slag (BOFS) as an alternative to fine crushed limestone aggregate in concrete. BOFS is sourced from two steel production facilities in Türkiye, designated as I-BOFS and E-BOFS. The experimental results showed that as the E-BOFS aggregate replacement ratio increased, the water-to-cement (w/c) ratio increased to maintain the target workability. The concrete mixtures incorporating E-BOFS exhibited consistent reductions in the compressive strength with an increase in the BOFS ratio. At the same time, I-BOFS maintained higher compressive strength, with only minor losses up to 80% of the substitution ratio. Flexural strength …

Development Of A Self-Cured Alkali-Activated Mortar, Kübra Ekiz Barış

Journal of Sustainable Construction Materials and Technologies

Alkali-activated mortars (AAM) can be produced with self-curing (SC), which supplies internal moisture to accelerate alkaline-activation reactions. The aim of using SC is to make AAMs with an early-age strength without any additional curing energy consumption and higher CO2 emissions, and to obtain in-situ practical advantages that enable the large-scale application of AAMs. The previous study produced natural pozzolan-based AAMs by applying energy-intensive heat (HC), microwave (MWC), and hybrid (HC+MWC) curing. This study investigates alternative curing regimes that reduce production energy without compromising material properties. The impacts of air curing (AC), water curing (WC), and SC on the properties were …

Naoh Molarity Effect On Mechanical And Hydrochloric Acid Resistance Of Geopolymer Mortar Based On Slag, Mahmoud Ziada, Zahraa Mohammed Kamil Al-Mayali

Journal of Sustainable Construction Materials and Technologies

The present research investigates the influence of different sodium hydroxide (NaOH) molarities on the mechanical characteristics and hydrochloric acid (HCl) resistance of geopolymer grouts manufactured from ground granulated blast-furnace slag (GGBS). Geopolymer mortars have attracted interest as sustainable substitutes for traditional cementitious materials due to their advantageous environmental effects and enhanced durability features. This study involved the fabrication of geopolymer mortar specimens by altering the NaOH molarity (M) from 6 M to 14 M. The mechanical and physical qualities were assessed using compressive strength, capillary water absorption, flexural strength, slump flow, and ultrasonic pulse velocity (UPV) tests. Subsequently, the geopolymer …

Effect Of Expanded Perlite And Exfoliated Vermiculite Aggregate Additives On Water Vapor Permeability Performance Of Cement-Based Lightweight Mortars, Lütfullah Gündüz, Şevket Onur Kalkan

Journal of Sustainable Construction Materials and Technologies

Vapor diffusion is the movement of water vapor molecules through porous materials such as wood, insulation products, and lightweight wall elements due to differences in vapor pressure. Vapor retarders are used to control vapor diffusion through wall sections and surfaces. All building materials provide some resistance to vapor diffusion, and the amount of resistance varies depending on the material's properties. These properties can vary with relative humidity and moisture content, age, temperature, and other factors. Vapor resistance is usually expressed using the inverse term of ``vapor permeability,'' which is the relative ease of vapor diffusion through a material. Water vapor …

Rubber-Modified Self-Compacting Mortar: Evaluating Setting Time And Strength Development, Navvar Makansi, Süleyman Ipek, Erhan Güneyisi

Journal of Sustainable Construction Materials and Technologies

The influence of using crumb rubber (CR) obtained from the second scraping of used tires as fine aggregate in manufacturing self-compacting mortar (SCM) was investigated experimentally in this study. To explore this, natural fine aggregate in SCM mixes was partially replaced with CR at levels ranging from 5% to 25% by total fine aggregate volume. Two mix series, one with a total binder of 500 kg/m3 and the other with a 540 kg/m3 binder, were designed at water-to-binder ratios of 0.40 and 0.33. Ordinary Portland cement (80% by weight) and fly ash (20% by weight) were used to manufacture mortars. …

Smart Traffic Management At Intersections, Gezim Hoxha, Piotr Gorzelanczyk, Rame Likaj, Shaban Thaqi, Flori Cikaqi

Journal of Sustainable Construction Materials and Technologies

Effective traffic control methods, whether at intersections or other nodes within the road network, play a critical role in ensuring traffic quality and safety. An inappropriate choice of traffic control techniques or poorly optimized light signal programming at intersections often leads to unsatisfactory service levels. This study specifically addresses the issues related to intersections controlled by traffic lights. It aims to identify the key factors influencing the regulation and programming of traffic lights, with a focus on using different microcontrollers, particularly the Raspberry Pi. The primary objective of this research is to develop a methodology and an adapted programming approach …

Identification Of Barriers And Drivers In The Adoption Of Sustainable Construction Practices In The Turkish Construction Industry: Exploratory Factor Analysis, Tülay Çivici, Mustafa Serhan Ünlütürk

Journal of Sustainable Construction Materials and Technologies

Although the importance of sustainability in the construction industry has been emphasised by many researchers and endorsed by many authorities, it is clear that the practices in the industry still need to be improved. The primary issue for adopting sustainable practices in the construction industry is identifying the barriers and drivers. For this reason, the study analysed the literature to identify the critical barriers and incentives for adopting sustainable practices in the construction industry. In light of the information from the literature, the necessary barriers and motivators in adopting sustainable practices in the construction industry were determined, and a questionnaire …

Synergistic Effect Of Alccofine As Partial Replacement Of Cement And M-Sand As Sand Substitution In Concrete For The Assessment Of Mechanical And Microstructural Properties, Yellinedi Madhavi, R.S. Ravichandran, J. Saravanan, N. Venkatasairam Kumar

Journal of Sustainable Construction Materials and Technologies

Using supplementary cementitious materials (SCMs) and traditional binder mass has revolutionized concrete production technology in the building industry. This study examines how Alcofine-1203 affects the microstructure and mechanical characteristics of concrete. The mechanical qualities of the mixtures were evaluated using six different mixes prepared for each M25 and M40 Grade. In the proposed mixes, cement is substituted with alccofine at 0 to 25% and M-Sand as fine aggregate. The Compressive strength and ultrasonic pulse velocity were assessed after 3, 7, 14, 28, 56, and 90 days of curing, and split tensile strength and flexure strength were evaluated after 28 and …

Sustainable Modification Of Stone Column Technique With Polyethylene Terephthalate (Pet) Plastic For Strengthening The Expansive Clay, Ng Jun Shen, Muzamir Hasan

Journal of Sustainable Construction Materials and Technologies

This research investigated the modification of stone column application by the association of PET plastic as a coarse aggregate material for sustainable material replacement. Clay soil improvement with a granular material fabricated column substantially affected its soil-bearing capacity. Subsequently, it avoided severe problems such as soil settlement and structural instability. Previous studies have mentioned the function and alteration of stone columns using materials like bottom ash and fly ash. Still, no attention has been paid to the utilization of PET plastic for this area. This study examined the feasibility and reliability of materials, PET plastic, and kaolin clay S300 before …

Effect Of Reinforcement Thickness And Content On The Properties Of Compressed Earth Blocks, Salah Eddine Mokeddem, Abdelmadjid Hamouine, Rabia Abdeldjebar, Atef Hamaidi

Journal of Sustainable Construction Materials and Technologies

This study explores the mechanical, hygroscopic, and thermal behavior of stabilized and unstabilized compressed earth blocks (CEB) by incorporating date palm wood chips (DPWC) as a natural fiber additive. The investigation covers a range of DPWC thicknesses (1 mm, 2 mm, 3 mm) and content variations (0% to 1% by weight), focusing on the interaction between the bio-based reinforcement and the stabilized soil matrix, which is stabilized with 10% white Portland cement. The mixtures were compressed at a pressure of 5 MPa using a hydraulic press, providing a detailed examination of how these parameters impact the structural integrity and functional …

Forensic Audit: Enhancing Certified Public Accountant Using Artificial Intelligence Techniques, Hasan Mazloum, Nawaf Mazloum, Ahmad Mohamad Saleh

BAU Journal - Science and Technology

Forensic accounting was developed after the widespread corruption in the world of business today. It is now considered a fundamental branch of accounting since it revolves around disputes and issues in the law that require accounting and legal knowledge and practices to be resolved. This study examines the impact of two forensic accounting domains – the expert witness and litigation support – on financial corruption in Lebanon by using AI The objective of this study is to investigate the potential of artificial intelligence (AI) techniques in enhancing forensic audit . The study adopts the analytical descriptive approach utilizing an empirical …

Impact Assessment Of Multipoint Video Distribution Systems On Satellite Signal Reception, Ali Karaki, Hiba Abdallah, Mohammed Al-Husseini, Hamza Issa

BAU Journal - Science and Technology

This work analyzes the potential interference impact on Geostationary Earth Orbit (GEO) satellites stemming from Multipoint Video Distribution System (MVDS) transmissions, specifically examining side lobe radiation within Lebanon. Through simulations and analysis of antenna emission patterns, the study measures how varying MVDS power outputs affect the carrier-to-noise (C/N) ratio at the satellite receiver. Results reveal a significant impairment of signal quality, showing the C/N falling to -2.3 dB with an MVDS power level of 0 dBW under current system parameters. To counter this interference, a potential two-phase mitigation strategy is presented and its effectiveness considered. The study contributes to improving …