Digital Commons Network^™

Development And Testing Of A Low-Cost Inertial Impact Sensor, Gabriel Michael Pesek

UNF Graduate Theses and Dissertations

Acceleration sensors have seen increasing usage within sports to detect when somebody receives an impact to their head which can potentially lead to Traumatic Brain Injury (TBI). While adoption of these sensors has steadily risen, the cost of these sensors is often cited as a reason they have not been as widely adopted, especially for amateur teams. This leads to the need for a lower-cost option for detecting these impacts. To fill this gap, a low-cost, lightweight acceleration sensor was designed that exploits the inertia of a working fluid on impact in order to rupture a metallic membrane which acts …

Improving Modeling Of Corrosion Products In The Primary Circuit Of Light Water Reactors Through The Experimental Determination Of Crud Characteristics, Sri Saravana Konganapuram Narasimma Bharathi

Electronic Theses & Dissertations (2024 - present)

High-temperature water flowing through the coolant circuits in pressurized water reactors (PWRs) creates a harsh environment, deteriorating these materials. This corrosion results in the formation of oxide layer(s) primarily composed of nickel ferrites, iron oxides, nickel oxides, and other nickel-iron-chrome spinel oxides. Being exposed to fluid with high flow rates and pressure, these oxide layers can be eroded, resulting in particulate fouling due to the release of corrosion products (Chalk River Unidentified Deposits, CRUD) into the coolant circuit. When CRUD subsequently deposits on fuel surfaces, it negatively affects the fuel performance (heat transfer and fuel failure); in addition, the particles …

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …

Development Of Alternative Plasma Etching Techniques For The Selective Removal Of Tan With Respect To Sioch Dielectric Materials To Enable Future Back-End-Of-The-Line Scaling, Ivo Otto Iv

Electronic Theses & Dissertations (2024 - present)

Transistor scaling has continued according to Moore’s Law for over fifty years. As transistor size decreases, adequate power delivery is required to enable transistor scaling without performance loss. Power delivery is provided by a metal interconnect network with insulating dielectric that connects the transistor level to the power source, the signal speed within this metal line network limiting transistor level switching speeds. Reduction of signal delay has moved from primarily dimension-based improvement towards adoption of conductor and dielectric materials with lower resistivity and a reduced dielectric constant value, respectively: transitioning from Al/SiO₂ to Cu/low-κ SiOCH. With this transition comes …

Neural Network Transceiver For Ltv Mimo Channels, Iresha Amarasekara

Electronic Theses & Dissertations (2024 - present)

Eigenfunctions are commonly employed to characterize kernels in various data-driven analyses. In machine learning, eigenfunction decomposition typically relies on Mercer's theorem, which assumes kernel symmetry. However, this condition is often unmet in communication systems, where channel kernels are asymmetric due to differences in downlink and uplink propagation environments. The High-Order Generalized Mercer's Theorem (HOGMT) provides a systematic approach for decomposing multidimensional asymmetric kernels into eigenfunctions. To address the complexity of eigen-decomposition, this work introduces a baseline neural network (NN) framework HNET. The HNET framework is further enhanced by incorporating the augmented Lagrangian method (ALM) to explicitly enforce orthogonality constraints. This …

Next-Generation Computing Hardware: Advancements In Tantalum Oxide Reram For Ai And Neuromorphic Applications, Rajas Ravindra Mathkari

Electronic Theses & Dissertations (2024 - present)

The rapid development of artificial intelligence, machine learning, and data-intensive computing has exposed the fundamental limitations of conventional von Neumann architectures, in which energy and time are continuously lost transferring data between physically separate memory and processing units. In contrast, the human brain performs complex computations directly at the point of memory storage through billions of parallel synaptic connections, a paradigm known as in-memory computing. Realizing this in hardware requires memory devices that are fast, energy-efficient, non-volatile, and capable of storing multiple resistance levels in an analog manner. Resistive Random Access Memory (ReRAM) based on tantalum oxide (TaOx) is one …

Investigation Of Fine-Grain Cu And Cu Alloys For Low-Temperature Hybrid Bonding Applications, Sarabjot Singh

Electronic Theses & Dissertations (2024 - present)

Hybrid bonding has emerged as a key enabler for next-generation three-dimensional (3D) integration, offering fine-pitch interconnects and improved electrical performance. However, conventional Cu–Cu hybrid bonding typically requires elevated temperatures to achieve sufficient diffusion and interface quality, posing challenges for temperature-sensitive device integration and process compatibility. This work investigates materials engineering approaches to enable low-temperature Cu–Cu bonding through both microstructure design and alloying strategies.

This work begins by examining grain refinement in Cu as a pathway to enhance diffusion through increased grain boundary density, providing efficient atomic transport without introducing additional elements. Three Cu-based systems Cu–Co, Cu–Ag, and Cu–Al were systematically …

Scalable Single-Erbium Telecom Qudits With Record Room-Temperature Quantum Coherence In Silicon-Based Nanostructures, Alexander Kaloyeros

Electronic Theses & Dissertations (2024 - present)

Advancing quantum information science demands solid-state quantum systems that maintain long quantum coherence at elevated temperatures while supporting scalable, CMOS-compatible fabrication and telecom C-band operation. No existing platform has simultaneously achieved these requirements, as state-of-the-art demonstrations of coherent control of erbium ions, with an intrinsic telecom-band optical transition, have been confined to cryogenic temperatures below < 10 K under controlled vacuum conditions. This thesis introduces a new paradigm in which materials science and engineering provides the enabling pathway to quantum coherence.

A foundry-compatible nanofabrication approach, paired with targeted materials engineering, is developed to realize a new class of CMOS-scalable quantum system: arrays of spatially isolated single-erbium-ion qudits (five-level systems) embedded in silicon-based (e.g., silicon carbide (SiC) and SiC_xO_y) hollow nanopillars (HNPs). Non-lithographically …

Molecular Diffusion In Chemically Amplified Resists For Euv Lithography, Eshan Dilina Thilakarathna

Electronic Theses & Dissertations (2024 - present)

Photolithography is a critical manufacturing step in high-volume manufacturing (HVM) of semiconductor devices, where a photoresist layer is used to transfer nanoscale patterns onto the underlying stack materials. As the microelectronics industry continues to move toward smaller node sizes, driven by Moore's Law. As a result, the tolerances for photoresist performance have become increasingly demanding, which necessitates simultaneous improvements in resolution, defectivity, and roughness. At advanced nodes, these performance limitations are governed by the fundamental stochastic nature of the photochemical processes occurring within the resist film itself, rather than the optical or tool-level constraints. Photon shot noise, the statistical distribution …

Challenges And Best Practices For The Development Of Coastal Hazard Decision Support Tools, Noah Hallisey

Open Access Dissertations

There is growing interest in developing Decision Support Tools (DSTs) supporting emergency managers and other decision-makers during coastal storm events. Yet many tools fail to inform decision-making due to challenges associated with their development and transition into operational tools for real-time decision-making. This dissertation investigates these challenges and offers best practices for their development and implementation for real-world decision-making through a literature review, interviews with subject matter experts in the United States, and a real-world case study.

Manuscript 1 reviews existing published literature to understand whether and how tool developers are incorporating emergency managers in the development of DSTs and …

Autonomous Coupler Alignment Using Position-Based Visual Servoing In A Ros~2 Framework, Nickolas Giffen

Graduate Research Theses & Dissertations

As robotic arms are becoming increasingly common alongside humans as collaborative robots, their high precision in motion enables tasks to be performed at significantly higher speeds with reduced disruption in the environment. The Fermi National Accelerator Laboratory is exploring this application by incorporating a UR16e from Universal Robots in a cleanroom setting during assembly of couplers to superconducting radio frequency cavities as part of the PIP-II project. The goal of the robotic assembly process is to precisely position the UR16e robot so that the coupler flange, mounted on the robot’s end-effector, is accurately aligned with and pressed against the cavity …

Deterministic Black-Box Context-Free Grammar Inference: Scaling From Small To Big Languages, Mohammad Rifat Arefin

Computer Science and Engineering Dissertations

Context-free grammars are essential for a number of software engineering tasks like program understanding, debugging, and grammar-based testing. However, formal language descriptions (i.e. grammars) are often unavailable, outdated, or inaccessible because parsers are closed-source or cannot be instrumented. Black-box grammar inference addresses this gap using only valid sample programs and parser acceptance decisions. The problem is challenging because finite samples rarely exercise all language features or their combinations, while the inference process cannot inspect the parser’s internal representation of syntax. This dissertation develops deterministic techniques for black-box context-free grammar inference. The first tool, TreeVada introduces the structural assumption that balanced …

A Critical Perspective On The Society Of Environmental Toxicology And Chemistry's Adherence To Founding Principles— Opportunities For The Future, Barnett A. Rattner, Annegaaike Leopold, Carys L. Mitchelmore, Glenn W. Suter, Mark S. Johnson, Adriana C. Bejarano, Lawrence A. Kapustka, Niranjana Krishnan, Derek C. G. Muir, Beatrice O. Opeolu, Martha Georgina Orozco-Medina, April Reed, Bruce W. Vigon, Adam R. Wronski

Epidemiology, Biostatistics, & Environmental Health Faculty Publications

The Society of Environmental Toxicology and Chemistry (SETAC) is a global organization whose mission is the advancement of environmental science and management through collaboration, leadership, communication and education. On SETAC's 45th anniversary, the following question was raised: Are the 1979 founding principles of SETAC, multidisciplinary approaches to solving environmental problems, multisector engagement and scientific objectivity, still useful, adequate and effective in fulfilling its mission? In a special session held at the 45th Annual Meeting in Fort Worth, Texas, United States, a critical evaluation of the founding principles was initiated by reviewing SETAC's history and ongoing activities, and recommendations were made …

First-Job Contract Review Cheat Sheet, Johanna Jones-Morris, Ashlee Martellacci

Teaching and Learning Resources

This cheat sheet helps first-time employees understand what to review before signing an employment contract. It highlights job duties, compensation, scheduling, employment terms, benefits, restrictive clauses, worker classification, and common red flags so that individuals can ask informed questions and recognize potentially unfair or unclear terms.

Probing Proficiency-Related Neural Representations With Pca And Ica, Onila R. Narayana Mudalige Don

Graduate Student Theses, Dissertations, & Professional Papers

How proficiency-related information is represented in task fMRI depends not only on the data themselves, but on the representational lens used to summarize them. This thesis examines second-language (L2) proficiency as a problem of representational organization rather than as a simple classification exercise. Using task fMRI from adult language learners performing semantic animacy judgments in their native language (L1) and second language (L2), I derive shared low-dimensional network representations with principal component analysis (PCA) and independent component analysis (ICA), then evaluate those representations under matched leakage-controlled decoding pipelines.

Across analyses, the central comparison is between representational frameworks rather than between …

Cross-Layer Supervisory Control For Low-Altitude Uav Swarm Networks, Nitin Singh Rathore

Computer Science and Engineering Theses

Low-altitude unmanned aerial vehicle (UAV) swarms are increasingly used in applications such as aerial sensing, disaster response, and communication support, where reliable operation under dynamic and uncertain conditions is essential. In these environments, performance degradation arises from multiple sources, including external disturbances, sensing uncertainty, and communication impairments. Although these effects originate from different layers of the system, such as dynamics, observation, and networking, they often manifest as similar tracking or coordination errors. Conventional control approaches, which rely primarily on error-driven feedback, do not explicitly account for the underlying cause of these deviations, limiting their effectiveness in multi-agent settings. This thesis …

Effects Of Metals On Persulfate Activation For The Decomposition Of Pfas, Malu Deav Devadasan

Civil Engineering Dissertations

Per- and polyfluoroalkyl substances (PFAS) are persistent environmental contaminants widely used in industrial and consumer products due to their unique physicochemical properties. Their resistance to degradation, potential for bioaccumulation, and associated adverse health effects have prompted increasing regulatory attention, including the establishment of drinking water standards for six PFAS compounds by the U.S. Environmental Protection Agency in 2024.

Current PFAS treatment technologies are often energy-intensive and costly or generate secondary waste streams requiring further management. Meanwhile, this research investigated transition metal-catalyzed advanced oxidation processes for PFAS decomposition in water under ambient conditions. Previous studies demonstrated effective degradation of perfluorocarboxylic acids …

Gaussian Process Regression–Based Uncertainty Quantification For Unmanned Aircraft System Traffic Management And Advanced Air Mobility Applications, Aakarshan Khanal

Mechanical and Aerospace Engineering Dissertations

Uncertainty quantification has gained significant attention in recent years as a research area in dynamical systems. Mathematical representations of the physical system, combined with an understanding of model uncertainties, enable the propagation of uncertainty in temporal space, which allows us to make informed decisions. However, what if the true dynamics of the system is unknown or too complex to define explicitly? In such cases, the system’s behavior can instead be inferred or learned from observed input–output data rather than from an analytical or physics-based model. To this end, this dissertation focuses on developing a data-driven framework for nonparametric dynamics modeling, …

Development Of An Apparatus For Advanced Selective Laser Melting And Polishing Research, Joshua A. Fishbein

Open Access Master's Theses

Abstract contains Controlled Unclassified Information (CUI) and cannot be provided.

Assessing Modular And Conventional Construction For Sustainable Student Housing At The University Of Rhode Island: A Life Cycle Approach, Lasse Franzen

Open Access Master's Theses

The building sector accounts for a significant share of global greenhouse gas emissions, with embodied impacts gaining importance as operational efficiency improves. Modular construction is frequently proposed as a lower-impact alternative to conventional site-built methods, yet reported findings remain inconsistent, and no comparative study of student housing was identified in the reviewed literature. This thesis compares the embodied environmental impacts of two student housing developments at the University of Rhode Island: the New University Housing Project (NUHP), a hybrid development combining a site-built concrete and steel podium with a factory-built volumetric timber module superstructure, and Brookside Hall, a conventional site-built …

Effect Of Kelvin Seamount On Acoustic Propagation, Lindsey Moss

Open Access Master's Theses

This thesis contains CUI. It cannot be distributed, exported, uploaded, or published until it has gone through the proper public release process.

Assessment Of Local Amplification Causes At Coastal Strong Motion Stations With Elevated Ground Motion Residuals From The 2024 Tewksbury, New Jersey Earthquake, Patrick Daniele

Open Access Master's Theses

Elevated ground motion amplitudes at individual stations are commonly observed in earthquake datasets, yet the physical causes of these residuals are often not explicitly identified. This study investigates two seismic monitoring stations in southeastern New York that recorded amplified motions during the 2024 Mw 4.8 Tewksbury, New Jersey earthquake. A consistent set of established geophysical methods -- including multichannel analysis of surface waves (MASW), passive ambient noise arrays (MAM), stochastic inversion, horizontal-to-vertical spectral ratio (HVSR) analysis, and directional spectral ratio techniques -- was applied to directly characterize site conditions and identify the mechanisms contributing to amplification.

Results show that elevated …

Carbon Nanotube/ Thermoplastic Polyurethane (Cnt/Tpu)-Based Triboelectric Nanogenerator With Self-Charge Pumping For Implantable Knee Load Sensing And Energy Harvesting, Osama Abdalla, Maryam Hosseini, Milad Azami, Amir Ameli, Emre Salman, Milutin Stanacevic, Ryan Willing, Shahrzad Towfighian

Mechanical Engineering Faculty Scholarship

Aseptic loosening and joint instability remain the primary modes of failure in total knee arthroplasty (TKA). To provide real-time biomechanical load monitoring, this study presents a triboelectric nanogenerator (TENG) utilizing a carbon nanotube/foamed thermoplastic polyurethane (CNT/TPU) composite dielectric layer paired with a Kapton tape between dual electrodes. By leveraging the triboelectric effect, the device functions simultaneously as an energy harvester and a self-powered load sensor. To overcome power density limitations, a self-charge pumping mechanism via a multi-stage voltage multiplier circuit (VMC) was integrated and evaluated under physiological cyclic loading (2100 N at 1 Hz). The system’s charge dynamics were further …

Eco-Friendly Solvent-Based Fabrication Of Single-Layer And Polydopamine-Modified Bilayer Pvdf-Hfp Membranes, Eesh M. Kulshrestha

Theses and Dissertations--Chemical and Materials Engineering

The growing global demand for clean drinking water has intensified the need for advanced water treatment technologies capable of efficiently removing contaminants while maintaining environmental sustainability. Polymeric membrane systems have emerged as an effective approach for water separations due to their high separation efficiency, simplicity, and adaptability to a wide range of water treatment applications. However, traditional membrane fabrication processes often rely on toxic organic solvents, such as N-methyl-2-pyrrolidone (NMP) and diemethylacetamide (DMAc), which pose environmental and health risks. These concerns have led to an increase in regulatory restrictions, primarily through the Registration, Evaluation, Authorisation, and Restriction of Chemicals (REACH) …

Investigation Of Succinylated Zwitterionic Polyethylenimine/Dna Complexes: Performance In Serum, Internalization, And Intracellular Fate, Levi Lampe

Theses and Dissertations--Chemical and Materials Engineering

Gene therapy has promised to revolutionize medicine since the earliest clinical trials, but a lack of delivery methods that are both safe and efficient has hampered progress. Gene therapy with viral vectors is effective at delivering nucleic acids to cells, but is associated with dangerous immunogenic responses and cancer-causing insertions into the genome. Viral vectors are also among the most prohibitively costly therapeutics in medicine. Polymeric vectors avoid these dangers and are made from inexpensive, off-the- shelf materials, but have been hindered by poor efficiency compared to viral vectors.

A benchmark polymer for in vitro nucleic acid delivery has been …

Aqueous Synthesis Of Luminescent Semiconductors For Opto-Electronic Applications, Saurabh Singh

Theses and Dissertations--Chemical and Materials Engineering

The advancement of opto-electronic and scintillation technologies relies heavily on developing low-temperature, eco-friendly, and scalable synthesis routes for high performance luminescent halide-based semiconductor materials. However, traditional synthesis methods for halide-based semiconductors, including hot-injection, solvothermal, solid-state reactions, Ligand-Assisted Reprecipitation (LARP), microwave-assisted synthesis, and thin film deposition techniques (spin coating, physical vapor deposition (PVD), chemical vapor deposition (CVD), etc.), often demand toxic organic/inorganic solvents, elevated processing temperatures, and high vacuum/inert environments. Such constraints limit their scalability, raise environmental concerns, and impede their commercial-level device integration. This research overcomes these long-standing challenges by employing water as a powerful crystallization-directing, and environmentally benign medium …

Anaerobic Digestion Of Food Waste Components: Modeling Biogas Production, Opeyemi E. Adelegan

Civil Engineering Dissertations

Food waste constitutes the single largest component of municipal solid waste landfilled in the United States — approximately 22% of 292.4 million tons generated in 2018 — and its anaerobic decomposition releases methane, a greenhouse gas with global warming potential approximately 27–30 times that of carbon dioxide over a 100-year horizon (IPCC, 2021). Anaerobic digestion (AD) offers an alternative management pathway that recovers energy and produces nutrient-rich digestate, but AD performance varies by as much as five-fold across food waste streams (130–630 m³ CH₄ per Mg VS added), and existing predictive tools either treat food waste as a …

Nanosecond Pulsed Electric Fields For Extracellular Vesicle Engineering: From Electro-Exocytosis To Cargo Modulation, Art Neal, Teresa Graham, Mohamadmahdi Samandari, Arash Ghorbannia, Anca Dobrian, Stephen J. Beebe, Ruben M. L. Colunga-Biancatelli

Bioelectrics Publications

Extracellular vesicles (EVs), including small extracellular vesicles (sEVs) and medium/large extracellular vesicles (MVs), have emerged as promising therapeutic vectors and diagnostic biomarkers across various branches of biomedicine. However, the clinical translation of EV-based technologies remains constrained by persistent challenges in manufacturing: insufficient yield from primary cell sources, limited control over cargo composition, and the absence of scalable, standardized production platforms. Nanosecond pulsed electric fields (nsPEF) represent an emerging biophysical approach that can address several of these limitations. Unlike conventional electroporation, which targets the plasma membrane using microsecond-to-millisecond pulses, nsPEF delivers ultrashort (1–300 ns), high-amplitude (10–300 kV/cm) pulses that penetrate intracellularly …

Preventing G-J Tube Dislodgement - A Device And Communication Innovation, Sarah Clark

2026

Abstract

The Problem: G/J tube dislodgement is a frequent complication in pediatric patients.

Leads to:

• Emergency department visits
• Hospital admissions
• Delays in nutrition/medication

Impact on Patients & Families:

• IV placement (traumatic)
• Radiation exposure
• Overnight hospital stays

Impact on Nurses & System:

• Increased workload (admissions, coordination)
• Occupied inpatient beds for stable patients
• Inefficient care processes

Aims/Objectives Aim: Reduce unplanned G/J tube dislodgements and related hospital utilization.

Objectives: Develop a breakaway connector prototype

Implementation and Evaluation:
Setting: Pediatric inpatient & outpatient system
Participants: Nurses (bedside, GI, IR), caregiver, innovation team
Process: Roundtable discussions → identified workflow gaps Communication/workflow audit Developed …

Advancing Cyber-Physical Security And Resilience Of Modern Power Systems: Intelligent Monitoring, Secure Operation, And Resilient Recovery, Md Moshiur Rahman

Graduate Studies Theses and Dissertations 2026

Modern power distribution systems are rapidly evolving into cyber-physical, DER-rich, and data-driven networks that rely on extensive sensing, communication, automation, grid-edge intelligence, and operator decision support. While this transformation improves flexibility, observability and controllability, it also expands the cyber-attack surface and increases the risk that cyber intrusions can propagate into physical disturbances, compromised DER operation, degraded situational awareness, and interrupted service continuity. This dissertation advances the cyber-physical security and resilience of modern distribution systems by developing a high-fidelity real-time cyber-physical hardware-in-the-loop testbed using OPAL-RT, EXata CPS, industrial relays, SCADA/RTAC, HMI, and grid-edge devices to emulate realistic DER-integrated distribution grid operation. …