Digital Commons Network^™

Waveguide-Assisted Single-Mode Fiber Bragg Gratings In A Highly Multimode Coreless Fiber Via Femtosecond Laser Inscription For Extreme Temperature Quasi-Distributed Thermal Sensing, Farhan Mumtaz, Koustav Dey, Bohong Zhang, Jeffrey D. Smith, Ronald J. O'Malley, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

This research reports a potential quasi-distributed thermal mapping optical sensing system for extreme temperatures, leveraging femtosecond (fs) laser inscribed single-mode fiber Bragg gratings (FBGs) and a waveguide within coreless, highly multimode optical fiber, resulting in a single-mode structure. Unlike doped single-mode fibers, coreless fibers composed of silica rods prevent issues associated with dopant migration and ensure data accuracy. The strategic placement of point-by-point FBGs in a cascaded formation on the fs-laser inscribed waveguide facilitates localized multipoint sensing. The long-term stability of the proposed waveguide-assisted FBG system was assessed over 24 hours at elevated temperatures (1000°C), showing no hysteresis during heating …

Embeddable Optical Fiber Sensor For Simultaneous Strain And Temperature Monitoring, Amardeep Kaur, Sudharshan Anandan, Steve Eugene Watkins, Yinan Zhang, Kumbla Chandrashekhara, Hai Xiao

Electrical and Computer Engineering Faculty Research & Creative Works

We present an embeddable hybrid optical fiber sensor based on a cascaded extrinsic Fabry–Pérot interferometer (EFPI) and intrinsic Fabry–Pérot interferometer (IFPI) for simultaneous strain and temperature monitoring in high-performance composite materials. The sensor is fabricated using femtosecond laser micromachining and is embedded within bismaleimide composite laminates manufactured via an out-of-autoclave process. Experimental results demonstrate linear and decoupled responses to strain and temperature, with the EFPI showing minimal temperature sensitivity (1.7 pm/°C) and the IFPI exhibiting high temperature sensitivity (16.1 pm/°C). Strain sensitivities for both components were consistent at 0.6pm/με in embedded conditions. The sensor maintained structural integrity and stable spectral …

New Metrics For Disambiguating Feature Overlap And Catastrophic Forgetting In Incremental Learning Contexts, Niklas M. Melton, Leonardo Enzo Brito Da Silva, Donald C. Wunsch

Electrical and Computer Engineering Faculty Research & Creative Works

Catastrophic forgetting remains a central challenge in lifelong learning, where newly acquired knowledge interferes with previously learned tasks, degrading performance over time. Mitigation strategies such as rehearsal and regularization have been proposed, but both introduce limitations, either by retaining old data or by constraining model updates in ways that may impair learning. Complicating matters, recent findings show that feature-space overlap between tasks can produce similar performance drops even in models that memorize data, making it difficult to distinguish true forgetting from representational interference. Current accuracy-based metrics fail to disentangle these effects, undermining diagnostic clarity. In this work, we introduce the …

Honey-Cnt Memristive Artificial Synaptic Device For Sustainable Neuromorphic Computing System, Md Mehedi Hasan Tanim, Zoe Templin, Harshvardhan Uppaluru, Jinhui Wang, Kuan Yew Cheong, Feng Zhao

Electrical and Computer Engineering Faculty Research & Creative Works

Brain-inspired neuromorphic computing systems require hardware components analogous to biological neurons and synapses. Honey based natural organic memristor has demonstrated promising nonvolatile memristive behaviors, with the advantages of sustainability, environmentally friendliness, and low-cost manufacturing. In this study, carbon nanotubes (CNTs) are added in honey to fabricate honey-CNT memristive artificial synaptic devices. Honey-CNT film is characterized by micro-Raman spectroscopy and the distribution of CNT bundles embedded in the honey-CNT composite layer by cross-sectional scanning electron microscopy for the first time. Critical synaptic functions of the honey-CNT memristor, including spike-rate-dependent plasticity, spike voltage dependent plasticity, learn-forget-relearn, and supralinear spatial summation are revealed, …

Real-Time Multiregional Market-To-Market Congestion Management Through Exchange Of Relief Cost Curve, Haotian Chen, Yonghong Chen, Jose Daniel Lara, Jarrad Wright, Matthew Bossart, Sebastian De Jesus Machado, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

This paper introduces a novel method for multiregional market-to-market (M2M) coordinated congestion management. It identifies shortcomings in existing M2M approaches, where Regional Transmission Organizations (RTOs) exchange shadow prices and relief requests to optimize congestion relief allocations across interconnected regions. Two methods are proposed to enhance flow and price convergence. The first method proposes that both Regional Transmission Organizations (RTOs) use state-estimator flows directly to determine relief requirements, eliminating delays and potential oscillations caused by using market flows calculated from the prior period under existing M2M approach. The second method involves exchanging transmission relief cost curves, enabling each RTOs to integrate …

Transformer-Customer Relationship Identification Based On Load-Switching Fluctuation Characteristics Considering Same-Feeder-Adjacent-Transformer Condition, Yanan Zhang, Gan Zhou, Yuyuan Liu, Wei Gu, Yanjun Feng, Yujue Wang, Rui Bo

Electrical and Computer Engineering Faculty Research & Creative Works

Accurately identifying the connectivity between transformers and downstream three-phase customers in low-voltage distribution networks is challenging, because voltage curves of different phases and nearby nodes can be weakly distinguishable, especially when adjacent transformers on the same feeder serve geographically close customers with highly similar voltage curves. This paper proposes a novel method based on load-switching fluctuation characteristics recorded by smart meters. By extracting localized current and voltage fluctuations and establishing correlation matching, the method overcomes the limited discriminability using steady-state measurements. The method operates in two stages: first, switching-induced fluctuation characteristics are extracted and matched to cluster customers by the …

Insights Of Quantitative Imaging And Instantaneous Heat Transfer Coefficient Measurement In Spouted Bed Column, Hasan A. Abdulwahab, Abbas J. Sultan, Amer A. Abdulrahman, Haydar A.S. Aljaafari, Ali A. Yahya, Zahraa W. Hasan, Malik M. Mohammed, Laith S. Sabri, Bashar J. Kadhim, Jamal M. Ali, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

In this study, the heat transfer behavior of a conical spouted bed column was imaged for the first time across its entire cross-sectional area and at multiple axial heights. To achieve this, a custom-built quantitative imaging approach was developed. This method combined FluxTeq heat flux sensors with an Arduino-based data acquisition system. The experimental setup enabled instantaneous, spatially resolved measurements of surface temperature, heat flux, and local heat transfer coefficients (LHTC) under various operating conditions. Measurements at different radial locations, angles, and heights provided a comprehensive view of heat transfer behavior throughout the column. The obtained cross-sectional images show that …

Evaluation Of A Novel Re-Crosslinkable Preformed Particle Gel For Conformance Control In Ultra-High Temperature Reservoirs, Yanbo Liu, Tao Song, Caleb Kwasi Darko, Thomas P. Schuman, Mingzhen Wei, Baojun Bai

Chemistry Faculty Research & Creative Works

Preferential fluid flow remains a major challenge in subsurface energy production and gas storage operations, resulting in excessive water production in mature oil fields, reduced heat extraction in geothermal reservoirs, and low sweep and storage efficiency in CO₂-EOR projects. Polymer gels are widely used to mitigate high-permeability channels; however, conventional systems exhibit limited plugging efficiency and short lifetimes in ultra-high-temperature reservoirs due to poor thermal stability. This study presents a novel ultra-high-temperature-resistant preformed particle gel (UHT-PPG) developed for conformance control in reservoirs with temperatures of 150–275 °C and severe super-K or channeling problems. The material was evaluated in …

Sadqn-Based Residual Energy-Aware Beamforming For Lora-Enabled Rf Energy Harvesting For Disaster-Tolerant Underground Mining Networks, Hilary Kelechi Anabi, Samuel Frimpong, Sanjay Madria

Mining Engineering Faculty Research & Creative Works

The end-to-end efficiency of radio-frequency (RF)-powered wireless communication networks (WPCNs) in post-disaster underground mine environments can be enhanced through adaptive beamforming. The primary challenges in such scenarios include (i) identifying the most energy-constrained nodes, i.e., nodes with the lowest residual energy to prevent the loss of tracking and localization functionality; (ii) avoiding reliance on the computationally intensive channel state information (CSI) acquisition process; and (iii) ensuring long-range RF wireless power transfer (LoRa-RFWPT). To address these issues, this paper introduces an adaptive and safety-aware deep reinforcement learning (DRL) framework for energy beamforming in LoRa-enabled underground disaster networks. Specifically, we develop a …

A Large Thermal Vacuum (Tvac) Facility To Simulate Cryogenic Space Environments, Emmanuel Kofi Asuako Wie-Addo, Lucas Alexander Scott, Frank Daoru Han

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This work reports the upgrade of a 10-ft (3.0 m) long x 6-ft (1.8 m) diameter vacuum facility as part of ongoing efforts to address some of the technology gaps in NASA's Moon to Mars mission architecture, which include systems to survive and operate through extended periods in extreme environments. Consequently, a removable thermal shroud has been fabricated and installed to facilitate the simulation of extreme cryogenic conditions. The cooling rates of the shroud and a surrogate test article, using liquid nitrogen as the coolant are analyzed and documented under varying vacuum environments during cryogenic testing. The attainable vacuum level …

A Combined Tomographic Particle Image Velocimetry And Numerical Simulation Approach For Supersonic Wind Tunnel Calibration, Joshua Gary, Josiah Mcdermott, Kyle Worden, Serhat Hosder, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Supersonic wind tunnels remain essential tools for high-speed aerodynamics research, yet the characterization of their free-stream conditions remains technically challenging and lacks standardized criteria for defining "good" flow quality. While traditional calibration methods rely on intrusive probes, recent advances in optical diagnostics offer new opportunities for non-intrusive characterization. In this work, we demonstrate a novel use of Tomographic Particle Image Velocimetry (Tomo-PIV), combined with numerical simulations, as a methodology for supersonic wind tunnel calibration. The approach is applied to the recently upgraded Missouri S&T Supersonic Wind Tunnel, where Tomo-PIV measurements reveal uniform flow with low angularity and low turbulent noise …

Physics-Constrained Generative Adversarial Networks For Dimensionality Reduction In Optimization, Samuel Sisk, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft make a unique form of urban air mobility due to their low noise, zero emission, and precision control. To maximize efficiency, high-fidelity simulation-based multidisciplinary design optimization discovers the optimal balance among subsystems within an eVTOL. However, conventional multidisciplinary design optimization is computationally intensive due to excessive high-fidelity model evaluations. Moreover, complex nonlinear constraints deteriorate optimization efficiency and convergence. While surrogate models enable efficient design optimization, surrogate modeling suffers in large-scale applications and surrogate-based optimization still has to deal with nonlinear constraints. To address these challenges, the authors' previous work proposed physics-constrained generative adversarial …

Optimal Takeoff Trajectory Prediction Of Electric Drones Based On A Fully Automated Optimal Experimental Design Method, Jiachen Wang, Dheeraj Paramkusham, Xiaosong Du

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric vertical takeoff and landing (eVTOL) aircraft is attracting great interest as a viable solution to promote urban aerial mobility with promising flexibility as well as emission reductions. However, the low specific energy of the current battery is still a strong constraint on the range and endurance of eVTOL flights, especially considering the significant power demands during the takeoff process. Engineering design optimization permits promising solutions for the minimum takeoff energy consumption but can be computationally intensive due to iteratively evaluating simulation models. Surrogate-based design optimization is efficient but still relies on optimization iterations which prohibit real-time decision-making. To fill …

Tomo-Piv Study Of Baseline Flow Structures Behind A Strut Injector, Josiah Mcdermott, Connor Bell, Davide Viganò

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Stabilizing combustion in scramjet engines is a formidable challenge due to the small-time scales afforded for air-fuel mixing. Numerous studies in this area have demonstrated the potential of strut-style platforms for fuel injection and mixing enhancement, which remains an active area of research. In the Aerodynamics Research Laboratory at Missouri S&T, a strut-style injector system has recently been installed. In this study, we characterize the baseline flow structures behind this platform absent fuel injection. The wake generated by a strut itself has an appreciable impact on the resulting air-fuel mixing, which motivates its characterization. In future studies, this characterization will …

Atomized Oxidative Polymerization As A 3d Printing Platform For Binder-Free, Bulk Conductive Polymer Architectures, Tazdik Patwary Plateau, Hiep Pham, Jonghyun Park

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Translating the ultrahigh intrinsic conductivity of conjugated polymers into bulk 3D architectures remains a formidable challenge due to the fundamental dichotomy between rheological printability and electronic purity. Existing strategies necessitate a compromise: solution-processing requires insulating binders that degrade charge transport, while binder-free vapor-phase polymerization (VPP) is kinetically confined to surface-limited thin films by diffusion constraints. Here, we introduce atomized oxidative polymerization (AOP), a manufacturing paradigm that overcomes these kinetic barriers via active, layer-by-layer monomer atomization. This approach ensures stoichiometric reaction conditions throughout the printed volume, driving a structural transition toward highly conductive quinoid-dominant chains with enhanced π-π stacking. The resulting …

Anisotropic Second-Harmonic Ince-Gaussian Beam Generation Using Nbobr2 Holograms, Jayanta Deka, Xiaodong Yang, Jie Gao

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Ince-Gaussian (IG) modes are a complete and orthogonal set of solutions to the paraxial wave equation in elliptic coordinates representing a continuous transition between Hermite-Gaussian modes and Laguerre-Gaussian modes. Chip-scale platforms to generate IG beams have great significance for various applications, including optical trapping and micromanipulation of particles, optical communication, and quantum optics. On the other hand, materials with high optical anisotropy are crucial for building polarization-sensitive optical devices. In this context, niobium oxide dihalides are a new class of ferroelectric materials exhibiting strong, tailorable, and highly anisotropic second-harmonic generation responses. Here, we report the generation of highly anisotropic second-harmonic …

Performance Evaluation Of Thick Carbon Fiber-Reinforced Laminates Manufactured Using Six-Magnetron Microwave System, Nayan Pundhir, Sourav Bolar, Kumbla Chandrashekhara, Kristen Donnell, Jim Lua, Kalyan Shrestha, Rui Li

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Microwave curing is a fast, energy-efficient, and a viable alternative to conventional thermal curing processes. It has been widely adopted for processing carbon fiber-reinforced polymer composites because the high electrical conductivity of carbon fibers enables strong microwave coupling. In this study, IM7/Cycom 5320-1 unidirectional prepreg has been used to fabricate 64-layer laminated composites. Symmetric cross-ply ([0°/90°]16S) and a quasi-isotropic ([45°/90°/−45°/0°]8S) layup have been investigated. A custom-built six-magnetron microwave applicator and an autoclave were employed to manufacture the composite panels. Degree of cure of the manufactured laminates was evaluated via differential scanning calorimetry. Interfacial bonding and porosity of the microwave-cured laminates …

Dermatology Skin Lesion Image Analysis, Victoria Wegley, Joshua Hoog, Tristan Crawford, Keith Miller, William Fons, K. Pugh, J. Taylor, S. Swinfard, A. Fernandes, G. Patel, J. Hagerty, W. V. Stoecker, Ronald Joe Stanley

Research Data

Dermatology skin lesion image analysis research has been ongoing at Missouri S&T (previously UMR) since the 1980s. Our group has been successful in finding over 20 key dermoscopic structures in melanoma, melanoma mimics, and nonmelanoma skin cancers using iterative structure-based analysis. Structures are chosen to reduce system errors which are concentrated in a few classes: amelanotic/featureless, regressed, and small in situ melanomas, and the most difficult benign lesions to identify: Clark nevi, lentigines, and seborrheic keratoses [1]. Preliminary research detecting and using annotated lesion structures [2-7] and lesion artifacts [8,9] guided by clinical experience [10] with image processing and deep …

Wings Of Perception: Investigating Customer Sentiments In Indian Aviation Sector, Yashodhan Karulkar, Kaiwan Vaghchhipawala, Aditya Trivedi, Anushree Talekar

Journal of International Technology and Information Management

India's aviation sector, a key contributor to the nation's economy, has experienced rapid growth, supporting nearly 7.5 million jobs and contributing approximately $30 billion annually to the GDP (Gross Domestic Product). The growth, driven by increased demand for air travel and government incentives, has resulted in more competition among carriers. In the competitive market, it is necessary to understand customer preferences to enhance the quality of service and maintain a competitive edge. The dissemination of customer opinions on social media and review platforms offers airlines the opportunity to access passenger views. However, extracting useful information from this unstructured data is …

Business Process Redesign For Reducing Undelivered Product Return Losses In E-Commerce – An Explainable Ai Approach, Venkataraghavan Krishnaswamy, Deepa R, Himanshu Sharma

Journal of International Technology and Information Management

Product returns in e-commerce affect the profitability of the e-tailer. We adopt a two-stage approach to reduce undelivered product returns in an e-commerce firm. First, we develop and compare machine learning techniques—logistic regression, decision trees, Naïve Bayes, random forest, adaptive boosting, gradient boosting, stochastic gradient boosting, and deep neural networks—on their ability to predict undelivered returns. Next, we use explainable methods, such as relative importance and Shapley values, to develop insights from the best-performing machine learning model. Finally, we use these insights and the predictive model to redesign the firm’s order fulfillment and return processes. A Post-implementation evaluation of the …

Metabolic Reprogramming Following Mitochondrial Transfer Between Idh2-Mutant Chondrosarcoma Cells And A Normal B-Cell Line, Caleb Wyckoff, Christopher Osgood, Ellen Jing, Michael Stacey

Bioelectrics Publications

Background/Objectives: Chondrosarcoma, glioblastoma, acute myeloid leukemia, chronic lymphocytic leukemia, and cholangiocarcinoma cancers all contain mutations in the gene isocitrate dehydrogenase 2 (IDH2). The mutant IDH2 enzyme metabolizes alpha-ketoglutarate (αKG) into the potent oncometabolite D-2-hydroxyglutarate (D2HG) in the mitochondria of these cancers, leading to altered cellular metabolism. Emerging evidence suggests that mitochondrial transfer between cancer and recipient cells represents an important form of intercellular communication that may influence cellular metabolism. The presence of intercellular TNTs between IDH2-mutant chondrosarcoma cells motivated an investigation into mitochondria-associated physiological changes occurring during an intercellular exchange with immune cells. A mitochondrial transfer is a two-way …

Determining The Electric Field In A 10 Ns Pulsed Plasma In Fuel-Air Mixtures Using Efish, Md Ziaur Rahman, Christopher J. Kliewer, Brian D. Patterson, Chunqi Jiang

Bioelectrics Publications

Transient plasma ignition (TPI) utilizes non-equilibrium plasmas, produced by nanosecond high-voltage pulses, to improve lean-fuel combustion performance and reduce emission. It is known that the relatively high reduced electric field (E/N) in TPI plays an important role in generating energetic electrons and facilitating energy-efficient radical productions, resulting in reliable ignition for lean combustion. Determining the reduced electric field in the discharge is hence important for the understanding of the TPI process and ultimately allowing for the control of the plasma chemistry. This study reports spatiotemporally resolved measurements of the electric field (E) in a 10 ns pulsed plasma that is …

Establishment And Histopathological Characterization Of A Kyse-30 Subcutaneous Xenograft Model Of Esophageal Squamous Cell Carcinoma, Pavel A. Solopov, Alayna Enos, Mantas Silkunas, Giedre Silkuniene, Eleni Zivla, Andrei G. Pakhomov, Olga N. Pakhomova

Bioelectrics Publications

Background/Objectives: Esophageal squamous cell carcinoma (ESCC) is an aggressive malignancy with poor prognosis and limited treatment options, highlighting the need for reliable preclinical models for translational research. Although xenograft models are widely used in cancer biology, systematic characterization of subcutaneous ESCC models under defined implantation conditions remains limited. The objective of this study was to systematically compare implantation conditions and define histopathological and growth-related parameters that enable reproducible tumor establishment while maintaining a practical experimental window for therapeutic studies. Methods: We established and characterized a subcutaneous ESCC xenograft model using human ESCC cell line KYSE-30 implanted into immunodeficient J:NU mice. …

Ammonia Synthesis By Nanosecond Pulsed Atmospheric Pressure Plasma Jets Impinging On Water, Zach Caudell, Lynnet Rich, Olga Pakhomova, Chunqi Jiang

Bioelectrics Publications

Developing energy-efficient technologies for carbon-neutral ammonia (NH₃) synthesis is critical for decentralized fertilizer production and global decarbonization. This study investigates generating NH₃ from water using a nanosecond pulsed atmospheric pressure plasma jet (ns‑APPJ) operating in either N₂ or dry air. The plasma jet reactor employed approximately 250 ns, up-to-22 kV pulses at 500 Hz to sustain a nonequilibrium discharge impinging directly on static liquid water. The kinetics, energy efficiency, and product selectivity of NH3 formation were quantified as functions of the pulse voltage, repetition frequency (PRF), and gas flow rate. NH₃ production increased linearly with treatment time and scaled strongly …

Combination Therapy With Hsp90 Inhibitors And Nanopulse Stimulation Synergistically Impedes Hepatocellular Carcinoma And Breast Cancer Growth In Mice, Christiana Dimitropoulou, Gagan Thangjam, Brittany P. Lassiter, Teresa Hooker, Ruben M. L. Colunga Biancatelli, John D. Catravas, Stephen J. Beebe

Bioelectrics Publications

Nanopulse Stimulation (NPS) represents a promising and innovative therapeutic approach to cancer. Heat shock protein 90 Inhibitors (HI), on the other hand, are currently under investigation in multi-drug chemotherapy trials for various types of malignancies. Here we present results of a combination therapy employing two HSP90 inhibitors (AUY-922 or 17-AAG) and NPS to ablate cancer growth. We firstly tested the inhibitors alone or in combination with NPS in vitro in N1S1 cells, and then into two models of orthotopic Hepatocellular Carcinoma (HCC) and 4T1-Luc breast cancer. NPS + HI reduced tumor growth more than the sum of HI and NPS …

Beyond The Meter: Frameworks For Evaluating The Broad Spectrum Of Microgrid Benefits, Elias Henderson

Cal Poly Humboldt theses and projects

Community-scale microgrids can create a range of social benefits. These include resilient electricity, cleaner air, decarbonization, and economic development, alongside more qualitative values like energy sovereignty and community self-determination. Many such benefits, however, are illegible to California’s market and regulatory frameworks. This thesis traces this disconnect, with particular attention to grid-edge communities in Northern California.

Microgrid benefits are classified as monetized, modeled, or incommensurable according to their inclusion/exclusion in existing regulatory and revenue mechanisms. To explore each category, a mixed-methods analytic approach is employed, pairing Tribal and stakeholder interviews with the development of a microgrid valuation calculator. This tool is …

Construction Industry Preparedness For Generation Z And Millennials: Aligning Industry Characteristics With Workforce Job Preferences, Ameenullah Amiri, Dhaval R. Gajjar, Jason D. Lucas

The Professional Constructor

The construction industry in the United States suffers from workforce shortages, partly due to younger generations being hired more slowly than baby boomers retire. Generation Z’s (Gen Z) lack of interest in joining the construction industry, coupled with the retirement of older workers, has amplified the problem. This paper investigates existing literature to identify the work and career preferences of Gen Z and Millennials and determine where the industry may focus efforts to attract these two generations. Through a systematic literature review, this study identified overlaps and gaps between the current construction industry workforce’s perceptions of the industry and the …

Anonymized Survey Dataset On Road Safety Assessment During Construction Of Bus Rapid Transit (Brt) Corridors In Dar Es Salaam, Tanzania, Lorain Salufu

Open Data

This dataset contains anonymized survey responses collected for a study on road safety assessment during construction of the Dar es Salaam Bus Rapid Transit (BRT) Phase 3 corridor. The dataset includes responses from 400 participants, together with the survey. The data were collected to assess perceived safety conditions, adequacy of construction-phase safety measures, effectiveness of traffic diversions, and the effects of construction activities on road users and nearby communities. No personally identifiable information is included in the shared files.

Direct Ink Writing Of Shear Exfoliated Two-Dimensional Nanomaterial- Elastomeric Multifunctional Nanocomposite, Md Abdur Rahman Bin Abdus Salam, Asif Hasan Ridoy, A K M Abirul Haque, Muhammad Shahbaz Rafique, Md Arafat Hossain, Md Shahriar Forhad, Matthew G. Boebinger, Farid Ahmed, Karen Lozano, Ali Ashraf

Manufacturing & Industrial Engineering Faculty Publications

Direct ink writing (DIW) of polymer nanocomposites with high loadings of two-dimensional (2D) nanofillers (graphene and hexagonal boron nitride (hBN)) is challenging because of potential clogging, use of hazardous solvents, and agglomeration. Here, in this work, a shear exfoliation and sieving method to prepare DIW ink with high loading of nanofillers produced from low-cost bulk layered materials such as graphite and bulk hBN powder for successful DIW printing without the use of any solvents, binders, or plasticizers. The single-step exfoliation technique resulted in a composite with substantial layer reduction along the c-axis, as confirmed by SEM, TEM, XRD, and Raman …

Structured Laser Vision-Based Measurement Of Gta-Weld Pool, Gang Zhang, Jianbo Wang, Yu Shi, Ding Fan, Yuming Zhang

Electrical and Computer Engineering Faculty Publications

The current study of weld pool fluid dynamics in arc welding focuses on the numerical model establishment and simulation, and the x-ray combined with particle trace imaging observations, there is no real-time monitor and quantitatively characterize the weld pool flow behavior in welding process for controlling the weld quality. This study develops an innovative structured laser vision-based sensing system for three-dimensional (3D) reconstruction and quantitative analysis of weld pool surface topographies in gas tungsten arc welding (GTAW). Through characterization of dynamic weld pool morphologies, two novel parameters are proposed: the surface convexity variation rate (R_h) and fluid …