Digital Commons Network^™

Sub-Nanometer Nanoclusters Of Copper Atop Single-Atom Copper Moieties Toward Electrochemical Co2 Hydrogenation To Methane, Ahmed Badreldin, Mohammad Bilal Minhas, Shengyao Wang, Gabriella Smith, Shaoqin Chen, Shiwen Wu, Carter Racine, Jin Feng, Yun Hang Hu, Tao Li, Ying Li

Michigan Tech Publications

The electrochemical CO2 reduction (eCO2R) offers a compelling route for converting CO2 into value-added fuels and chemicals. Among CO2-derived products, methane (CH4) occupies a distinct position, serving both as a key intermediate for emerging cascade electro-oxidation to oxygenates and as a strategically important extraterrestrial fuel that can be generated in situ from off-planet CO2 resources. Although Cu-based catalysts capable of selectively producing CH4 have been reported, they seldom sustain high selectivity at practically relevant current densities. Here, we created a single-step co-pyrolysis strategy toward generating and anchoring Cu sub-nanometer clusters (CuSNC) atop Cu-Nx single-atom (SA) motifs embedded within N-doped carbon …

Convergence Education In A Stem-Focused University: An Ethnographic Study Of A Cross-College Design And Innovation Program, Greg J. Strimel, Sherylyn Briller, Jackson Otto, Rebecca Martinez, Douglas Pruim, Todd R. Kelley

School of Engineering Technology Faculty Publications

Background

Innovation often transcends the bounds of individual disciplines, yet undergraduate teaching is still largely organized today within single disciplines and respective academic units. Convergence education offers a promising organizational approach to bring transdisciplinary teaching and learning into undergraduate education by aligning institutional structures, pedagogy, and partnerships around meaningful, innovation experiences to address contemporary problems. However, longstanding academic silos in higher education hinder the adoption of convergence-focused pedagogies. Therefore, this study examined the three-year implementation of a novel convergence education initiative developed to foster design and innovation capabilities across multiple academic disciplines. By integrating faculty from the university’s engineering technology, …

Growth Potential Of Materials For Decarbonization: Insights From The Cement Industry Value Chain, Noha Mostafa

Mechanical Engineering

To meet the Paris Agreement objectives and limit global warming to 1.5˚C compared to preindustrial levels, it is estimated that the built sector must cut its total emissions by 50% before the year 2030 and fully decarbonize it by 2050. The built environment is estimated to be responsible for 40% of global energy and emissions. These global carbon emissions include both operational carbon—the day-to-day carbon emissions generated through the operation and maintenance of buildings—and embodied carbon. With its recorded high emissions, cement manufacturing is a key area of interest for the decarbonization efforts. To meet the increasing demand for sustainably …

Sustainable Cellulose Aerogels And Biofaoms From Date Palm Waste For Thermal Insulation Application, Hyder Ali Al Abdallah

Thesis/ Dissertation Defenses

This dissertation is concerned with the use of date palm waste for the preparation of green lightweight aerogels and foams. Cellulose extracted from date palm wood waste is utilized to fabricate cellulose aerogels. Moreover, wood foams are prepared from whole biomass wood waste, without any prior treatment or extraction processes. The aim of this research is to produce sustainable, green, environmentally friendly heat insulation materials the construction, to replace commercial and fossil-fuel derived heat insulators. In this research, cellulose is extracted from date palm trees waste using both traditional and green environmentally friendly solvents. After extraction, cellulose aerogels are prepared …

Humanizing Engineering For Preservice Elementary Teachers Through Sustainable Engineering Stories, Jeffrey D. Radloff, Madison M. Morris, Jacob Pleasants

Journal of Pre-College Engineering Education Research (J-PEER)

Meeting the goals of US K–12 science education reform requires that preservice elementary teachers (PSTs) understand engineering as a specialized discipline and a human endeavor that addresses real-world issues. Yet in their formal education, few PSTs receive opportunities to learn about the humanistic dimensions of engineering: engineers’ personal values and motivations, the sociocultural nature of engineering work, and the societal significance of engineering. Storytelling about engineering offers a practical way to give PSTs access to these ideas. This study examines the impacts of integrating storytelling about engineering in a science methods course for future elementary school teachers. Over a two-year …

Proxyconnec: A Lora-Based Proactive Safety Communication System For Off-Grid Environments, Shruti Bhandari, Roza Shaimurat

ATU Scholars Symposium

Remote environments lacking cellular or satellite coverage present significant safety challenges. ProxyConnec was developed as a point-to-point communication system using ESP32 microcontrollers and REYAX RYLR998 LoRa modules to provide off-grid monitoring.

The system implements a proactive heartbeat model in which a beacon device transmits a signal every 1,000 milliseconds. A base station monitors this connection using a 5,000 millisecond watchdog timer. If communication is interrupted, the system immediately triggers audible and visual alerts. Unlike conventional tracking devices that depend on manual SOS activation, this design treats unexpected signal loss as a potential safety event.

The manufacturer rates the selected LoRa …

Deep Spiking Neural Network Autoencoders For Efficient Temporal Data Compression, Shruti Bhandari

ATU Scholars Symposium

High dimensional temporal data processing, such as that required for neuroprosthetics and remote physiological monitoring presents significant challenges for real time deployment because transmitting and storing raw signals is computationally demanding and energy intensive. Effective data compression is essential to act as a "biological zip file," reducing transmission bandwidth while preserving the critical temporal features required for accurate signal reconstruction and analysis. This study proposes a deep Spiking Neural Network (SNN) Autoencoder designed for high-fidelity data compression by utilizing the event-driven firing behavior of Leaky Integrate-and-Fire (LIF) neurons, which ensures extreme computational efficiency compared to traditional models. The model is …

Automatic Three Phase Balancing In Utility Applications, Ryan Morris

ATU Scholars Symposium

Balancing three-phase power has become more important as modern loads like EVs and large agricultural fans create fast and uneven changes in distribution systems. Manual balancing is slow, inconsistent, and often only done during certain “seasons,” which leaves long periods of imbalance. This paper reviews existing automatic methods such as the Fast-Switching Relay method, the Practical Balancing Algorithm, and the Phase-EQ system and highlights their benefits and limitations. Based on this analysis, a new method called the Predicted Practical Balancing Algorithm (PPBA) is proposed. The PPBA combines the stability of threshold-based switching with historical data to predict when imbalances are …

Re-Purposing Pre-Existing Tilapia Aquaculture Open-Design System For Zebrafish Biomedical Research Purposes, Luke Cantu, David Sierra, Skyleigh Curtis, Maya Avila

ATU Scholars Symposium

Title: Re-purposing pre-existing tilapia open-design aquaculture systems for zebrafish biomedical research purposes.

Background: Zebrafish (Danio rerio) models are gaining popularity in biomedical research; however, the high infrastructure cost, at approximately $20,000 per unit, is a significant hurdle for primary undergraduate institutions (PUIs) establishing zebrafish facilities. This study assesses if repurposing existing tilapia open-design aquaculture systems could be a cost-effective method for zebrafish facility establishment.

Methods: Between November-2025 to February-2026, the study used a pre-existing tilapia aquaculture open-design system with personnel modified outlet filters. The water quality of this system was monitored and recorded. The study compared the stabilization phase or …

Tunable Shock And Vibration Damping In Metal Laser Powder Bed Fusion Components Via Controlled Post-Print Compaction Of Particle Damper Cavities, Joud N. Stame, Yanzhou Fu, Samuel Roberts, Austin Downey, Tianyu Zhang, Lang Yuan, Daniel Kiracofe

Faculty Publications

Components manufactured by Laser Powder Bed Fusion (LPBF) can incorporate particle dampers (PDS) by retaining unfused powder within internal pockets, providing inherent vibration suppression without added mass or separate damping components. This study investigates the damping performance of such LPBF-integrated PDs through two complementary approaches: (1) quantifying the effect of post-printing volume compression on energy absorption by mechanically indenting the damper pocket, and (2) evaluating how variations in particle packing density influence the dynamic response under both sinusoidal and transient impulse excitation. Experimental results from shaker and shock testing demonstrate that increased packing density, whether by compression or tighter confinement, …

Aiw26s: Applied Llms, Chengjie Zheng

Paul English Applied Artificial Intelligence (AI) Institute Publications

This workshop introduces the concept of applied large language models (LLMs), focusing on how users can move from simple prompt-based interaction to building structured, repeatable AI-driven workflows. Participants explore how AI enables faster prototyping, lowers barriers to entry, and expands who can participate in building technology. Through a hands-on demonstration, attendees learn how to transform raw inputs into meaningful outputs such as summaries, key concepts, and actionable steps. The session emphasizes the importance of clear problem definition, iterative refinement, and critical evaluation when working with AI systems.

Comparison Of Anomaly Detection Methods On Event-Based Vision Sensor Data In A High Noise Environment, Will Johnston, Anthony L. Franz, Shannon R. Young, Rachel Oliver, Zachary Theis, Brian Mcreynolds, Michael L. Dexter

Faculty Publications

Event-based vision sensors (EVSs) provide unique frequency analysis opportunities due to their event data output and high temporal resolution. Anomaly detection methods used in hyperspectral analysis can be used on the event frequency spectra to detect targets. However, the introduction of a strong, flickering interfering source can reduce the EVS sensitivity and obscure targets of interest. Previous work presented a method showing that targets could still be detected through an overwhelming source using frequency analysis, background suppression, and statistical filtering. This paper extends that research and compares the ability of five different eigenanalysis anomaly detection methods (principal component background suppression …

Systematic Design And Optimization Of Porous Bone Plates Using Taguchi Method And Finite Element Analysis, Aliaa A. Farraj, Tawakol A. Enab, Hanan M. Amer, Mostafa A. Elbahloul

Mansoura Engineering Journal

Solid bone fixation plates, although clinically effective, often induce stress shielding and impair periosteal blood flow due to their mismatch in stiffness with cortical bone. To overcome these limitations, this study proposes lattice-engineered porous bone plates designed to balance mechanical integrity and biological compatibility. A systematic parametric investigation was conducted by varying three design variables: crystal structure type (diamond, fluorite, and gyroid), porosity levels (50%, 70%, and 90%), and structure layout. Three-dimensional models were developed using nTopology, and finite element analysis (FEA) was performed under a static compressive load to evaluate stress distribution. A Taguchi L9 orthogonal array was employed …

Sustainable Materials And Energy Management In Interfacial Solar Evaporation Systems, Maryam Nooman Almallahi

Thesis/ Dissertation Defenses

Water scarcity is an escalating global challenge, particularly in arid regions, necessitating sustainable, decentralized technologies for freshwater production. Traditionally used desalination technologies include membrane and thermal distillation; neither approach has achieved the desired high level of environmental friendliness because both consume substantial electricity generated by fossil fuels. Therefore, new desalination technologies powered by sustainable energy and eco-friendly materials are in high demand. Solar-driven interfacial solar evaporation (SDIE) is a promising alternative for environmentally friendly, sustainable freshwater production, which involves efficient solar-to-heat conversion and heat localization at the evaporator surface. An evaporator usually consists of three main components—photothermal absorber, thermal insulation, …

Approach To Physics Education Using Local Ai With Rag For Open Educational Materials Generation, Dmitriy Beznosko

All Things Open

The new tool that starts to enter all parts of our life is AI – and it enters education as well. There are two standing large concerns with using AI for education – the safety of students’ data and the AI missing specific knowledge about the given class. The approach of using the Retrieval Augmented Generation (RAG) provides the user data to the locally run LLM model (using Ollama framework, a free and open-source tool that allows you to run large language models locally on your system) as a context for the generation of the OER materials. As this AI …

Digital Transformation And Market Microstructure: Analyzing The Impact Of Algorithmic Trading On National Stock Exchange Of India Price Discovery Mechanisms Through Complex Systems Theory., Mukesh Bhaskar Ahirrao, Harshal Anil Salunkhe, Vishal Sunil Rana

Northeast Journal of Complex Systems (NEJCS)

Abstract

This research examines the evolution of market microstructure at the National Stock Exchange of India (NSE) from 2020 to 2024, a period characterized by substantial growth in algorithmic trading from 35% to 44% of total trading volume. Using market microstructure data and analytical techniques grounded in complex systems perspectives, the study documents temporal patterns in price discovery, liquidity, volatility, and market efficiency associated with this digital transformation.

The analysis reveals several notable changes in market characteristics. Transaction costs improved significantly, with bid-ask spreads declining by 23.4% and market depth increasing by 18.1%. Price adjustment half-life decreased by 50%, indicating …

Optimizing Controller Speed And Torque To Reduce Drivetrain Stress, Selene J. Welch

SACAD: Scholarly Activities

This project investigates how torque delivery from the motor controller affects mechanical stress on the rear freewheel ratchet mechanism of a three-wheel electric race car. Excessive initial torque has caused accelerated wear and tear on the ratchet mechanism, reducing drivetrain reliability during Kansas ElectroRally competitions. Preliminary testing showed that slower, gradual acceleration prevented malfunction and allowed the vehicle to maintain top speed reliably. Prior research shows that torque-control strategies strongly influence electric-drive performance. Current research focuses on optimizing the controller’s torque and speed using the Alltrax Software ToolKit to reduce drivetrain tension while preserving the car’s performance capabilities.

Biomass Demineralization: A Critical Need For Future Biorefineries, Leoncio Santiago-Martínez, Styliani Avraamidou, Alejandro Ayala-Cortés, Ruth Azike, Santanu Bakshi, Chumki Banik, Ezra Bar Ziv, Fei Long, Rebecca Ong, Et Al.

Michigan Tech Publications

Biomass contains up to 14 essential elements that serve as nutrients for plant growth and development, including photosynthesis and enzyme functionalities. These elements in different chemical forms (e.g., minerals) constitute the inorganic fraction of biomass and can cause operational issues in thermal and biochemical biomass conversion technologies. In biomass gasification and pyrolysis processes, for instance, inorganics can cause fouling, tar formation, and corrosion. In catalytic and biochemical processes, inorganics can poison catalysts, alter biochemical pathways, and modify product yields and selectivity. This review provides an overview of the inorganic content in biomass feedstocks, the critical role inorganics play in plant …

Analysis Of The Effects Of Magnetic Field, Heat Transfer, And Thermal Radiation On Blood Flow Through Bifurcated Artery To Enhance Tumor Treatments, Abdullahi Isah, Dauda Gulibur Yakubu, Ali Musa

Tanzania Journal of Science

The work presents the effects of some pertinent parameters on blood flow through bifurcated artery to enhance tumor treatments. Combining appropriately the basic equations, together with the fractionalized Maxwell fluid model allow us to determine the velocity, temperature and concentration of blood flow through bifurcated artery. The study adopted the Atangana-Baleanu fractional time derivative on fluid model to describe the non-Newtonian behavior of blood flow. The numerical simulations were performed using the combined Laplace transform and the method of undetermined coefficients and the results obtained with the aid of Mathcad software were simulated and presented graphically. From the graphical results, …

Preliminary Study Of Circular Lithium-Ion Battery Thermal Management System With Intermittent Cooling, Muhammad Luthfi, Leo Van Gunawan, Yudhy Kurniawan, Sabda Ikhwal Rahmatullah, Alfarikh Muhammad Daen

Journal of Mechanical Engineering Science and Technology (JMEST)

The active battery thermal management system is important to maintain the lithium-ion battery temperature within the optimum and safe range. However, current research has not considered the potential for excessive energy consumption due to the continuous operation of a fluid flow source, such as a fan. This research aims to investigate the effect of a novel approach called intermittent cooling on the cooling efficacy and energy consumption of the circular-configuration BTMS. Both transient computational fluid dynamic simulation and experiment were conducted in this work with 30 pieces of 18650 Lithium-Ion batteries positioned in a staggered circular configuration. From the result, …

A Simulation-Based Comparison Of Energy Consumption And Carbon Footprint In Municipal Wastewater Treatment Using Conventional Nitrification–Denitrification And Partial Nitritation With Anammox, Shareef Puthiyottil

Thesis/ Dissertation Defenses

Municipal wastewater treatment plants are significant contributors to energy consumption and greenhouse gas emissions, particularly during secondary treatment processes. The high carbon footprint of wastewater treatment plants can be primarily attributed to two factors: direct greenhouse gas emissions (Scope 1) and energy consumption (Scope 2). Nitrous oxide released during secondary treatment has a global warming potential 273 times greater than that of carbon dioxide. Moreover, conventional nitrification/denitrification wastewater treatment plants are energy-intensive and associated with greenhouse gas emissions, yet widely implemented for their ease of operation and maintenance. This highlights the need to evaluate alternative treatment configurations that reduce energy …

Development Of Chitosan Encapsulated Ag/Zno Ternary Nanocomposites For Multifunctional Activity: Synthesis And Characterization, Latifa Ali Al Yabhouni Al Dhaheri

Thesis/ Dissertation Defenses

Nanocomposites of polymers combined with metal oxide nanoparticles have gained much attention due to their synergistic properties leading to enhanced functional ability. Herein, we report the synthesis of a nanocomposite composed of chitosan (CS) with Ag/ZnO nanoparticles produced via a wet chemistry route and fabrication of a pure CS and CS/Ag/ZnO thin films while varying the concentration of ZnO for each sample using a sol-gel transformation method. The CS/Ag/ZnO nanocomposite was characterized to study its crystal structure, morphology, thermal, and chemical properties. Morphological studies revealed uniform deposition of Ag NPs (with size range of 20-50 nm) and ZnO nanoparticles (with …

Complex Systems Mapping Of Fiscal Growth Dynamics At Strategic Maritime Chokepoints Using Time-Series Slopes, Rahul Balamurugan, Preethi Nanjundan, Avichal Sharma

Northeast Journal of Complex Systems (NEJCS)

This study examines how maritime and trading states allocate public resources between defence, health, and economic growth around three strategic chokepoints the Strait of Malacca, the Strait of Hormuz, and the Suez Canal. The analysis extends the classic “guns versus butter” framing by treating defence and health spending as co-evolving components of an interconnected fiscal-growth system. Using World Development Indicators data (1999-2024), trend slopes are estimated for military spending (% of GDP), healthcare spending (% of GDP), and GDP growth (annual %). Two derived indicators are computed, a defence-to-health slope ratio (military slope/health slope) and a fiscal-balance proxy (health slope …

Arum–D Nexus: Adaptive Reflexive Urban Metabolism For Complex Construction And Demolition Waste Governance In Bengaluru, Talat Naaz, Rosewine Joy

Northeast Journal of Complex Systems (NEJCS)

Urban material systems exhibit nonlinear dynamics governed by feedback, adaptation, and emergent coupling among institutions, markets, and behaviors. Construction and demolition (C&D) waste in Bengaluru is a great example of such complexity, where fragmented regulation, informal actors, and digital asymmetries coalesce into unstable waste flows and resource leakages. This study conceptualizes Bengaluru’s C&D waste system as a Complex Adaptive System (CAS), where institutional, market, behavioral, and metabolic subsystems co-evolve through nonlinear feedback interactions. A meta-analysis of secondary literature combined with benchmarking of government datasets is used to evaluate two key complexity indicators, i.e., response speed and feedback density. The advancement …

Self-Assembly Interactions In Magnetite-Coated Cellulose Nanocrystals: Implications For Magnetic Hyperthermia Applications, Mohammad J. Hasan, Erin L. Mcneill, Kishore Chand, Juganta Roy, Monishita Deb, Katherine Schlaak, Sydney Herzog, Yvonne Sun, Sarah Watzman, Esteban E. Ureña-Benavides, Erick S. Vasquez-Guardado

Chemical and Materials Engineering Faculty Publications

Magnetic cellulose nanocrystal (MCNC) nanocomposites are promising sustainable and biocompatible platforms for magnetic hyperthermia; however, the molecular mechanisms governing Fe3O4 adsorption and deposition onto CNCs remain poorly understood. Here, sulfated (S-CNC) and TEMPO-oxidized CNCs (T-CNC) were used to prepare nanocomposites at 1:2 and 1:4 CNC:Fe3O4 mass ratios, enabling a systematic evaluation of how surface chemistry and nanoparticle loading dictate interfacial interactions and magneto-colloidal behavior. Bare magnetite nanoparticles were 21 ± 5 nm by TEM but grew to 144 ± 18 in the DLS measurement at pH 7. The S-CNC nanocomposites had hydrodynamic sizes between 144 and 210 nm, not much …

Ai Method For Classification Of Diagnosis Of Near-Infrared Breast Lesion Images, Kaiquan Chen, Fangyang Shen, Honggang Wang, Zhengchao Dong, Jizhong Xiao, Ming Ma, Afroza Aktar, Christopher Chow, Wenxiong Zhang

Publications and Research

In near-infrared optical breast lesion screening and diagnosis systems, high-speed four-dimensional scanners can dynamically acquire tens of thousands of lesion images within a five-minute period. Currently, manual computer annotation is required to generate standard samples from these scanned breast lesion images, a process that depends heavily on physicians with clinical expertise. On average, a single physician can annotate only approximately ten samples per working day. As a result, this process is time-consuming and labor-intensive, and the collected samples often suffer from low accuracy, large variability, and limited diagnostic reliability. Several AI-based annotation tools, such as QuPath, HALO AI™, and X-AnyLabeling, …

Multiple-Valued Quantum Automata For Robotics, Yuchen Huang

Dissertations and Theses

This dissertation introduces a new type of quantum automata, their encoding and circuit realization. I concentrate on possible applications in robotics. Several methods and application of quantum automata and quantum circuit-based controllers for elementary robotic systems, with a focus on humanoid robot motion, emotion, and behavior generation are illustrated in detail. The research introduces several novel methodologies that bridge quantum computing principles with robotic control, aiming to overcome the limitations of classical deterministic and probabilistic approaches.

The dissertation first presents a quantum-circuit-based framework for generating non-repetitive and expressive (e)motions in a humanoid robot actor, using superposition and entanglement to produce …

Gas Lift Valve Operation Under Elevated Pressure And Temperature Conditions, Pedro O. De Melo Flores

LSU Master's Theses

Gas lift valves are critical components in artificial lift systems, and their performance directly influences well unloading efficiency and long-term production. Current industry models used to correct valve opening and closing pressure for temperature rely on assumptions that have not been extensively validated against experimental data. This study experimentally investigates the opening and closing behavior of injection pressure-operated (IPO) gas lift valves under controlled elevated-temperature conditions. A load rate test bench was modified to include a heating system capable of maintaining valve temperatures up to 220°F. Five gas lift valve designs from multiple manufacturers were tested over a range of …

Evolution Of Polypyrrole Electrode During Electropolymerization And Its Effect On Energy Storage Performance, Duy Pham, Ryan Tcheutchoua Gouafong, Jake Irvin, Ben Mckinney, Jacob Dileonardi, Mason Cox, Ashish Aphale

Faculty Articles

This study investigates the influence of electropolymerization time on the evolution of morphology and the electrochemical performance of polypyrrole (PPy) electrodes. The PPy films were synthesized by varying the deposition time from 300 seconds to 1800 seconds, corresponding to 5 to 50 cycles. The electrodes were characterized by Raman spectroscopy, XPS, and SEM, and electrochemical analyses were conducted using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge-discharge (GCD). Experimental results showed that increasing deposition time yields large cauliflower-like structures, thereby enhancing capacitance. The 50 cycle electrode exhibited the highest specific capacitance of 412 F/g in a three-electrode configuration …

Solving Wordle Using Information Theory, Talal Aladaileh, Donald Stephens, Mallak Alqaisi, Congyu Wu

Northeast Journal of Complex Systems (NEJCS)

Wordle, a popular word-guessing game, challenges players to identify a five-letter secret word through iterative guesses and feedback on letter placement. The players must figure out the secret word within six guesses. After each guess, the letters will be color-coded based on different criteria. Optimizing the choice of guesses is critical for maximizing success within the limited attempts allowed. In this study, the application of Shannon entropy is explored as a strategy for selecting words that maximize information gain at each step of the game. By quantifying the uncertainty reduction achieved by potential guesses, this method prioritizes words that are …