Digital Commons Network^™

A Bilstm+Attention Method For Predicting The Intentions Of Air Combat Targets Based On Multi-Feature Continuous Time Series, Qiuni Li, Dong Wang, Chaozhe Wang, Zongcheng Liu

Journal of System Simulation

Abstract: To achieve advance prediction of enemy target intention, a three-layer air combat intention prediction method based on multi-feature continuous time series and BiLSTM+Attention, including trajectory prediction, threat assessment, and intention prediction was proposed. To prevent the onesidedness of intention prediction results caused by state information at a single moment, prediction was carried out from multiple state features and trajectory information in a continuous time series. An LSTM neural network was used to predict the trajectory of the target aircraft, and the threat assessment of the target aircraft before and after the prediction was conducted. The BiLSTM + Attention model …

Large-Scale Multi-Objective Evolutionary Algorithm Based On Multi-Region Dynamic Grouping, Binhao Liang, Jingxuan Wei, Fengqin Liang

Journal of System Simulation

Abstract: The decision variable dimension of large-scale multi-objective optimization problems can reach hundreds or even thousands. For existing large-scale multi-objective evolutionary algorithms based on decision variable analysis, which usually consume a large amount of computational resources for grouping and fail to consider the interactions between convergence-related variables and diversity-related variables, a large-scale multi-objective evolutionary algorithm based on multi-region adaptive dynamic grouping was proposed. The algorithm employed a Gaussian mixture model to partition the decision space into multiple regions; within each region, feature vectors were constructed for each decision variable, and spectral clustering was utilized to perform grouping. To validate …

Optimization Of Air Defense And Antimissile Firepower Resource Allocation Based On Adaptive Hybrid Evolution, Wei Liu, Delong Chen, Ze Liu, Rui Wang, Kaiwen Li, Tao Zhang

Journal of System Simulation

Abstract: Air defense and antimissile firepower resource allocation is a core optimization problem in modern defense systems. Under complex conditions such as spatiotemporal constraints and firepower resource limitations, this problem involves the optimal configuration of limited interceptors and belongs to the class of NP-hard multi-constrained combinatorial optimization problems. This paper established a comprehensive mathematical model encompassing range constraints, time window constraints, feasibility matrices, and interception probability models. To address the high-dimensional nonlinearity of the problem, an adaptive hybrid evolutionary algorithm (AHEA) was proposed. The algorithm integrated problem-aware initialization, adaptive parameter control, seven specialized neighborhood search operators, and an adaptive strategy …

Mechanism Analysis Of Parasitic Torque In Electric Loading Systems, Xiaozhe Sun, Zhenyu Fu, Zhaoke Xu, Jianxin Li

Journal of System Simulation

Abstract: To address the issues of sources and mechanisms of parasitic torque in electric loading systems for aircraft actuator loads, a functional model of the electric loading system was established. Numerical simulations and Monte Carlo methods were employed to analyze the sources of parasitic torque and its primary influencing factors. The influence mechanisms and degrees of the system's external inputs and internal disturbances on parasitic torque were analyzed and validated through single-parameter and multi-parameter analyses. The results indicate that parasitic torque is predominantly influenced by factors such as loading command frequency, sensor signal bias, and loading motor parameters. In particular, …

Simulation On Water Hammer Characteristics Of Bipropellant Attitude And Orbit Control Propulsion System, Xianwei Lang, Yantao Wang, Fang Zhang, Yizhen Zu, Xinyu Zhang, Weibin Xiang

Journal of System Simulation

Abstract: To address the water hammer problem in bipropellant attitude and orbit control propulsion systems during start-up, shutdown, and periodic operation, the water hammer characteristics under different operating conditions are investigated using simulation methods. The water hammer characteristics of annular and branched propellant delivery lines are compared, and the effects of multiengine interactions under various operating conditions, as well as the influence of water hammer on engine performance, are analyzed. The results show that the attenuation rate of pressure fluctuation in the annular pipeline system is significantly higher than that in the branch pipeline system. Under the condition of multi-cycle …

Intersection Positioning Algorithm With Spatial Translation Based On Sar Scene Matching, Cheng'en Pu, Yumin Lai, Rui Shi, Yan Liao, Kezi Meng, Lifeng Qu

Journal of System Simulation

Abstract: To address the problem that the positioning precision of the inertial navigation system cannot meet the requirements of autonomous positioning when the aircraft flies, an autonomous positioning method with spatial translation based on circular scanning scene matching of SAR was proposed. The spatial translation positioning model of the aircraft was established according to the position of the ground matching points obtained by single point and single circular scanning scene matching of SAR, the oblique distance between the matching points and the aircraft, and the inertial measurement information of the aircraft. The characteristic information of the matching point sequence was …

State Monitoring Of Nuclear Power Connection Sleeve Quality Inspection Equipment Driven By Digital Twin, Yandong Nan, Jinda Zhu, Xinbin Lu, Zhiying Qin, Dandan Qi, Zhiheng Ding

Journal of System Simulation

Abstract: To address the problems of delayed state perception, single monitoring dimension, and insufficient visualization in the quality inspection equipment for nuclear power connection sleeves, a state monitoring method driven by digital twin was proposed. A digital twin-based collaborative state monitoring framework for the inspection equipment was constructed. Based on the OPC UA technology, a multi-source information interconnection model was established. A finite state machine model was employed to discretize and logically drive the inspection process, and a hierarchical verification strategy was proposed to establish a multi-dimensional motion state monitoring mechanism. A surrogate model coupling the radial basis interpolation function …

Design And Application Of Collaborative Simulation System For Satellite Constellation Flight Missions, Dong Yan, Hanzhe Yang, Fangfang Jiang, Chengbao Liu, Peng Zhang

Journal of System Simulation

Abstract: To meet the requirements of the collaborative drill for the ground operation and control system of the satellite constellation, as well as the verification and evaluation of in-orbit complex missions, the design ideas and implementation methods of the collaborative simulation system for satellite constellation flight missions were proposed. By adopting the time correction mechanism of the time-scale distributor, the time synchronization problem among the simulation nodes and the operation and control simulation system was solved. By adopting the communication technology based on improved PDXP + UDP, the problem of cross-node data interface and inter-satellite communication simulation was resolved. A …

Modeling And Simulation Of Target Characteristic Architecture Of Target Missile Based On Dodaf, Tuo Zhao, Yuqiao Liu, Yuan Ma, Yun Cheng, Shen Li

Journal of System Simulation

Abstract: In view of the problems of incomplete elements and missing architecture in the research of target characteristics of target missiles, this paper introduced the panoramic view, operational view, and capability view models in the DoDAF from the perspective of system engineering. According to the view development sequence of "panoramic description, operational decomposition, and capability matching", a target characteristic architecture of the target missile was constructed, which included target elements such as maneuvering characteristics and infrared radiation characteristics. The mapping relationship among "operational layer, capability layer, and target characteristic layer" of the target missile was obtained, and the architecture was …

Overall Design Method Of Low Earth Orbit Communication Satellite Based On Mbse, Jiace Shang, Rui Zhang, Ya Dai, Hua Zhu, Siqi Hu, Linqiang Ge, Chenguang Shi

Journal of System Simulation

Abstract: Drawing on the model-centric design philosophy of model-based systems engineering (MBSE), this study constructs a model architecture suitable for the design and analysis of low Earth orbit communication satellites. This architecture adopts a multi-dimensional matrix approach. Vertically, it traverses the mission layer, system layer, satellite general design layer, and subsystem layer, achieving top-down hierarchical decoupling. Horizontally, it establishes a comprehensive view mapping mechanism covering the domains of requirements, functions, structure, and performance. Integrating the characteristics of product development, a modeling process covering the entire lifecycle—from mission demonstration and overall design to subsystem design and integration verification—has been established. The …

Dynamic Model-Driven Verification Framework For Modular Aerial Bomb Systems, Wenlong Li, Shuhan Sang, Yusheng Liu, Haiyan He, Zan Liang, Wenqiang Yuan, Biao Niu, Weifeng Luo

Journal of System Simulation

Abstract: To address the problems of high verification costs, difficulty in covering dynamic behaviors, and lack of quantitative closed loops in the design stage of modular complex equipment, a dynamic model-driven modular system verification framework was proposed. Based on model-based systems engineering (MBSE) modeling, a structural coupling quantification model was constructed using the number of interfaces, signal interaction frequency, and dependency intensity. Dynamic tests were conducted in high-fidelity virtual simulation to collect data; performance rating for indicators such as accuracy, response, and stability, as well as system's comprehensive rating, were obtained, and the rating feedback was used for iterative optimization. …

Biomass Fuel Processing, Mineral Matter Engineering, And Ash Phase Equilibria For Deposition Control In Coal To Biomass Boiler Conversion, Spencer Bandi

Theses and Dissertations

As the conversion of coal utility boilers to 100% biomass combustors gains traction, understanding the interconnected impacts of harvesting and storage methods, fuel preparation, and thermochemical ash behavior is critical. This study evaluates miscanthus, switchgrass, and corn stover, targeting a < 1000 µm particle size through minimal (shredders/hammer mills) and heavy (pelletizing) pre-treatment. While heavy pre-treatment failed in a coal mill, minimal pre-treatment succeeded. Miscanthus (forage-harvested/silage-bagged) proved optimal, exhibiting minimal exogenous mineral accumulation up to (1.26 w%) and the smoothest mechanical feeding (deviation < 9%) due to its low particle aspect ratio. Conversely, baled switchgrass and corn stover accumulated up to 9.23 w% mineral matter and exhibited severe feeding resistance (>17% deviation) driven by fibrous, high-aspect-ratio morphologies. During combustion, agricultural residues yield low ash fusion temperatures (AFTs), generating deposits two to three times stronger than coal. To mitigate this severe fouling, mineral additives (coal fly ash, lime, and cement kiln dust) were injected. These additives effectively raised bulk AFTs and reduced deposit tenacity by up to 73%. Specifically, 2 w% …

Evaluating The Impact Of Residential Landscape Audits Using 5-Second Water Use Data, Mahmud Aveek, Camilo J. Bastidas Pacheco, David E. Rosenberg, Jeffery S. Horsburgh, Kelly Kopp, Belize A. Lane

Civil and Environmental Engineering Student Research

We used 5-s water use data to evaluate the effectiveness of residential landscape water audits in summer 2022. Fifty-nine households in two northern Utah cities were monitored for 2–5 weeks before and 3–10 weeks after an audit. We found that the distribution of weekly irrigation volumes postaudit was statistically less than the distribution preaudit (significant at the 1.9E10-5 level). Collectively, the participants reduced their landscape irrigation water use by approximately 379,000 L per week (100,300 gal per week; 0.3 acre-feet per week). We also analyzed changes in irrigation event volume, duration, frequency, and the number of days between events at …

Interpretable Machine Learning For Predicting Splitting Strength Of Asphalt Concrete: Insights From Shap Analysis, Jianglei Xing, Xiao Tan, Yihao Li, Dongzhao Jin, Pengwei Guo, Yuhuan Wang, Huiya Niu

Michigan Tech Publications

This paper proposes an interpretable machine learning approach for predicting the splitting strength of asphalt concrete and supporting data-driven mixture design. A database consisting of 296 samples was constructed, and 14 input variables related to asphalt properties, aggregate gradation, and fiber characteristics were selected for modeling. Eight machine learning models, namely TabPFN, ANN, SVR, RF, XGBoost, LightGBM, FLAML, and FT-Transformer, were developed and compared. The results show that all eight models achieved satisfactory predictive capability, whereas TabPFN overall achieved the best performance in the Monte Carlo cross-validation, with the lowest average RMSE of 0.34 ± 0.10, the lowest average MAE …

The Digital Neuron: Neural Cellular Automata For Neural–Symbolic Translation, Nicole Assenza

SMU Data Science Review

A neural cellular automata (NCA) architecture, referred to as Pluto’s NCA, was developed to characterize bilateral communication and semantic reciprocity between symbolic representations and a spatially distributed update field. The architecture employs an encoder–automata–decoder pipeline that maps symbolic inputs into a multichannel state field and reconstructs them through agreement-driven attractor convergence within a stable semantic attractor landscape. System behavior was evaluated under controlled perturbations, including rhythmic desynchronization, graded ablations, correlated and independent noise, and percolation-based structural degradation. Quantities such as Agreement(t), internal coherence Aᵢ(t), the recovery time constant τ, and the critical percolation threshold pc were measured to assess stability, …

Techno-Economic Analysis Of Hybrid Systems As A Solution For Electricity Supply During The Dry Season At The Bakaru Run-Of-River Hydropower Plant, Zamharir Aditya Febri, Mohammad Akita Indianto, Sheila Tobing

Journal of Materials Exploration and Findings

Within the South Sulawesi power system (Sulbagsel), the Bakaru Hydro Power Plant serves as a key facility expected to provide consistent and reliable electricity supply. However, since the Bakaru plant operates under a Run of River scheme, its energy output is highly dependent on river discharge rates. In 2024, a significant decrease in water flow was recorded between August and October, which led to a drastic reduction in power generation. To address this challenge, a hybrid energy system is proposed to ensure continuous load coverage, particularly during the dry season. The optimal configuration of this hybrid system was modeled and …

Techno-Enviro-Economic Analysis Of Precipitated Calcium Carbonate Production From Carbon Dioxide In Cement Industry Flue Gas And Calcium Hydroxide, Natalia Debora Panggabean, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

CCUS is a technological solution to reduce emissions from the cement industry, which is the second largest CO2-intensive industry. This study aims to analyze technical, economic, and environmental performance of Precipitated Calcium Carbonate (PCC) synthesis in cement industry flue gas. The process simulation includes the CO2 capture system from cement plant, CO2 captured used as feedstock for PCC synthesis process through its reaction with calcium hydroxide. The simulation was carried out using ASPEN Plus software. Technical analysis was performed to determine the CO2 capture efficiency and PCC synthesis efficiency. Economic analysis was conducted to calculate CO2 capture cost and production …

Feasibility Analysis Of Thermal Oxidizer To Determine Remaining Life Using Fitness- For-Service Level 3 Method, Yudhi Yudistirawan, Donanta Dhaneswara, Wahyuaji Narottama Putra, Gama Widyaputra, Dewi Kurnia Suci, Agung Putra Mahardhika

Journal of Materials Exploration and Findings

An aged thermal oxidizer (TOX) in the oil and gas industry necessitates a comprehensive evaluation to ensure its continued safe operation. This study presents a Remaining Life Assessment (RLA) and a Fitness for Service (FFS) evaluation for the four main components of the TOX, in accordance with API 510, API 579/ASME FFS-1, and ASME BPVC Section VIII Div-1 standards. The investigation includes the determination of maximum stress and maximum temperature required to assess the operational viability of the reactor. The four components are radiant, convection, transition, and stack sections—were modeled using the finite element method (FEM). Following the geometric modeling, …

Risk Identification Of Green Hydrogen Supply Chain In Ammonia Industry In Indonesia Using Delphi And Topsis Methods, Ananda Priatama, Sheila Tobing

Journal of Materials Exploration and Findings

The development of green hydrogen in Indonesia, while promising for supporting industrial decarbonization, remains in its early stages and faces various challenges across technical, economic, and regulatory domains. This study aims to identify and prioritize the risks linked to green hydrogen supply chain in Indonesia, particularly for applications in the ammonia industry. A set of 49 potential risk factors was initially compiled through literature review and prior studies. The Delphi method was employed with a panel of experts to validate these risks, ultimately refining the list to 27 critical risk factors. Subsequently, the Technique for Order Preference by Similarity to …

A Sustainable Approach To Tensile Property Enhancement In Sand Casting Via Metal Chip–Sand Composite Molds, Maaruf Isyaku, Danjuma Saleh Yawas, Mathew Olatunde Afolayan, Terva Ause

Journal of Materials Exploration and Findings

The present work focuses on the study of the effect of adding different weight percentages and particle sizes of various metal chips to foundry sand on the tensile strength of aluminum alloy castings, utilizing Taguchi's optimization methodology and regression analysis. Characterization techniques such as X-ray fluorescence (XRF), thermogravimetry, and SEM were also used. The XRF analysis identified aluminum (76.61%), silicon (17.49%), and magnesium (1.28%) as the major elements in the aluminum alloy engine block. For the foundry sand, silicon (89.51%), phosphorus (7.41%), and potassium (1.7%) were found. In contrast, the major constituents in cast iron included iron (88.3%), carbon (3.7%), …

Robust Non-Invasive Cardiac Index Prediction Via Feature Integration And Data-Augmented Neural Networks, Chih-Hao Chang, Mei-Ling Chan, Yu-Hung Fang, Po-Lin Huang, Tsung-Yi Chen, Tsun-Kuang Chi, I Elizabeth Cha, Tzong-Rong Ger, Kuo-Chen Li, Shih-Lun Chen, Liang-Hung Wang, Jia-Ching Wang, Patricia Angela R. Abu

Department of Information Systems & Computer Science Faculty Publications

Concurrent with the rising consumption of ultra-processed, high-calorie diets and the decline in physical activity, obesity and related cardiovascular conditions among young adults have continued to increase, becoming an important global public health concern. This study integrates non-invasive Internet of Things (IoT) sensing devices, including the TERUMO ES-P2000 blood pressure monitor (Terumo Corp., Tokyo, Japan) and the PhysioFlow PF07 Enduro cardiac hemodynamic analyzer (Manatec Biomedical, Poissy, France), with an artificial neural network (ANN) for cardiac index (CI) prediction. Through appropriate data preprocessing and model training strategies, the generalization ability and stability of the proposed CI prediction model were significantly enhanced. …

Assessing Passenger Electric Vehicle Growth Strategies And Their Impacts On Electricity Demand Load And Co2 Emissions In Aceh Province To Achieve Net Zero Emission Target By 2060, Taufik Hidayat, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The electrification of the transport sector is a crucial pathway for achieving Indonesia’s Net Zero Emissions (NZE) target by 2060. This study assesses the potential impact of passenger electric vehicle (EV) penetration on electricity demand and CO2 emissions in Aceh Province through a scenario-based modelling approach. Two policy-aligned scenarios are assessed: a low-penetration (LP) scenario and a high-penetration (HP) scenario. Using the Gompertz model and the ASIF framework, total CO2 emissions were projected from 2020 to 2060. Results show that although higher EV penetration reduces direct emissions from internal combustion engine (ICE) vehicles, total CO2 emissions increase more significantly under …

Temperature Determination And Scene Change Artifact Mitigation When Using Fourier-Transform Spectroscopy On Targets With Time-Varying Temperature, Kode A. Wilson, Michael L. Dexter, Benjamin F. Akers, Anthony L. Franz

Faculty Publications

Fourier-transform spectroscopy is a widely used technique for determining the spectral and thermal properties of a target. However, target temperature variations during measurement can compromise the spectral accuracy. Temperature fluctuations induce oscillations superimposed on the target spectrum. These oscillations, referred to as scene-change artifacts, degrade the spectral accuracy. The literature is divided, with theoretical predictions suggesting negligible artifacts and growing experimental evidence reporting significant artifacts. This paper presents a theory and experimental validation of scene-change artifacts originating from target temperature variations. Traditionally, the interferogram offset is assumed to be constant, an invalid assumption for a changing scene. The error is …

Optimization Of Vehicle Mix For Three-And Four-Wheel Passenger Transportation System In Nigeria, Omotunde A. Muyiwa, Hamid A. Jimoh, Kolawole T. Oriolowo

Tanzania Journal of Engineering and Technology (TJET)

Efficient transportation systems are essential for reducing passengers waiting times in densely populated areas. However, there is a dearth of information on the optimization of vehicle mix for three-and four-wheel transportation systems in Nigeria. The present study was designed to optimize the vehicle mix for three-and four-wheel passenger transportation to improve transportation efficiency. Twenty purposively selected vehicles were observed, while a queuing model (M/M/s) was used to determine passenger arrival rates during different periods (morning, afternoon, and evening). An integer linear programming model was developed to minimize passenger waiting times. Data on vehicle types, capacities, travel cycles, and average passenger …

Implementation Of The Fourth Industrial Revolution Technologies In Tanzania’S Downstream Oil And Gas Industries, Vitalis John Mwinyi

Tanzania Journal of Engineering and Technology (TJET)

The advent of the fourth industrial revolution (IR4.0) has resulted in the digital transformation of multiple sectors of the economy due to the disruptive nature of the technologies driving the revolution. The technologies have already found their way into the oil and gas industries across the globe, especially in upstream, midstream, and downstream operations. However, the degree of implementation is not the same for these operations, considering the complexities involved, integrated process, the associated risk and investment cost, among others. This study aimed to establish the implementation level of IR4.0 technologies in the downstream operations. A survey method was employed …

Analysis Of Factors Enabling Organisational Governance Maturity For The Technical Audit Function In Tanzania, George C. Haule

Tanzania Journal of Engineering and Technology (TJET)

The study aimed to identify key factors contributing to Organisational Governance Maturity (OGM) of the Technical Audit Functions (TAF) in Tanzania.  The study employed a sequential approach as a research design.  The first step was to collect and analyse literature studies to identify factors enabling the OGM of the TAF.  Next, a questionnaire was administered to one hundred twenty-eight (128) respondents from seven (7) TAFs to rank the key enabling factors that were identified from the literature that influence the OGM of TAF in Tanzania.  Using data from a questionnaire administered to 128 respondents, a two-step strategy was employed to …

Revitalising Tanzania’S Textile Industry Through The Uk Textile System’S Role, Charles M. Kahabi

Tanzania Journal of Engineering and Technology (TJET)

Currently, there is the environmental and social challenges emerging from the global clothing and textile industry, specifically on textile waste management.  Additionally, the flow of second-hand clothing (SHC) between European countries especially the UK and Tanzania is increasing. In the UK, rapid growth of second-hand clothing (mitumba) driven by fast fashion results in vast quantities of discarded garments, of which only a fraction is recycled, leaving the remainder in landfills. Conversely, Tanzania has long depended on imported SHC a practice that, while affordable, has undermined local textile industries and contributed to waste accumulation. By examining Tanzania’s textile landscape, the research …

Silicon Dioxide Multimode Interferometer Spectrometers, James Harkness

Theses and Dissertations

Multi-mode interferometer (MMI) spectrometers are a type of reconstructive micro-spectrometer based on imaging light propagation patterns in MMI waveguides. This dissertation describes how the MMI spectrometer was implemented for the first time using a silicon dioxide core. This approach showed a 6 dB improvement in SNR over SU-8 core devices. To implement the silicon dioxide MMI spectrometer, a fabrication technique for selectively roughening the surface of the waveguide needed to be developed. SU-8, a photosensitive polymer, was etched with oxygen plasma to create grass-like nanostructures. SU-8 grass can then be used as a transfer mask to plasma etch a surface. …

Leveraging Convolutional Neural Networks For Through-The-Wall Radar Imaging: Challenges, Impacts, And Future Directions, Tumaini Edgar, Abdulla F. Ally, Abdi T. Abdalla

Tanzania Journal of Engineering and Technology (TJET)

Through-the-wall radar imaging (TWRI) is an essential technology for military and rescue applications; however, its performance in detecting and visualizing high-quality images of targets behind walls is significantly degraded by multipath reflections and signal attenuation. This paper reviews the current state of TWRI and its challenges, and explores the transformative potential of deep learning, particularly convolutional neural networks (CNNs), in addressing these challenges. Peer-reviewed articles published from 2018 to 2024 were analysed to examine CNN applications in addressing TWRI challenges. The analysis reveals that using CNNs, TWRI systems can be more effective by filtering wall distortions, reducing noise, lowering computational …

A Review Of Energy Storage Technologies With Hydro Energy System Design For Off-Grid Electricity, Daniel H. Ngoma, Banet L. Masenga

Tanzania Journal of Engineering and Technology (TJET)

Many renewable energy sources such hydropower—particularly small-scale run-of-river and micro-hydro—offers reliable, low-cost generation. However, their inherent intermittency (due to seasonal flow variations) and inability to instantly match demand necessitate integrated energy storage to ensure a stable, continuous power supply. This review synthesizes contemporary energy storage technologies in the context of their integration with off-grid hydro energy system design.

The study examine a spectrum of storage solutions, evaluating their technical characteristics, costs, and suitability for hybrid hydro applications. Pumped Hydro Storage (PHS), while highly efficient and large-scale, is often geographically constrained and capital-intensive for small off-grid projects. Battery Energy Storage Systems …