Digital Commons Network^™

The Preparation Of Zinc Chloride From Smelter Waste, Victor K. Fischlowitz

Masters Theses

"Interest in the matter of recovering zinc from residual material attaches through the value of a practical method of recovery consistent with commercial operations. The material used in this work at the Missouri School of Mines and Metallurgy was supplied by one of the large chemical firms of Saint Louis"--Introduction, page 3.

Test 072: Avery 8-16, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 081: Eagle 12-22, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 030: Aultman-Taylor 30-60, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Mining, Concentration And Refining Of American Flake Graphite By The Griesemer Graphite Company, Joseph C. Barton

Professional Degree Theses

"The Griesemer Graphite Company was incorporated June 3, 1916, under the laws of Alabama, for the purpose of mining, milling and refining of flake graphite...Owing to strong competition in the graphite game, it will be impossible to give many interesting facts and figures in this thesis. The screen analysis worked for after each operation is carefully watched and the preparing of the ore, as well as the sizing of the flake, is one of the most important features in the production of flake graphite, especially that grade required by the crucible makers and the lubricating manufacturers. The carbon content is …

Unique Method Of Driving Large Tunnel At The Hannibal Quarry Of The Atlas Portland Cement Company, James Leonidas Boucher

Professional Degree Theses

"During the development of operations at the limestone Quarry of The Atlas Portland Cement Company, Hannibal, Mo., it was found necessary to drive a large tunnel from one open "cut" to a point where the opening up and development of other "cuts" could be carried on"--page 1.

The St. Johns River Bridge For Duval County, Florida, Enoch Ray Needles

Professional Degree Theses

No abstract provided.

Metallurgical Bookkeeping, John Owen Ambler

Professional Degree Theses

"A system of costs and metallurgical records similar to that outlined herein is in use in a number of modern Smelters, and is of interest as showing what information is desirable for proper plant control. From a study of this information, which is usually compiled monthly in such a manner that comparisons may be readily made, it is possible to modify current practice to obtain maximum operating efficiency, and to approximate very closely the benefit that may be derived from changes in and additions to the plant itself and the methods of operation, or in the materials received and treated. …

Metallurgy Of Steel Castings, Earl Joesting Mcnely

Professional Degree Theses

"This Thesis is in the form of a report of the observations of the author while working in the American Steel Foundries plants in various departments. The parts of the report dealing the Moulding and Inspection of castings were written while in the Indiana Harbor Indiana plant. The parts dealing with the Laboratory and Furnace Operation were written while in the Granite City, Illinois plant. The company owns and operates six other plants but the material covered in this report will, in a general way cover the operations in these plants, also, in which foundry work is carried on"--Introduction, Page …

Test 028: Beeman Model "C", Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 065: Toro 6-10, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 055: Allis-Chalmers 18-30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Milling Practice Of The Missouri-Kansas-Oklahoma Field As It Has Developed In The Past Two Years, Frank Stillmann Elfred

Professional Degree Theses

"The writer has limited his subject to deal with the past two years as it is only the past two years that a great deal of research has been done in the field upon milling ideas and practices; but I will briefly give you the evolution of our present milling and concentrating practices by means of the following flow sheets"--Page 1.

Electrolytic And Furnace Refining Of Copper In South East Missouri, Ray Gould Knickerbocker

Professional Degree Theses

"This article treats with the production of refined ingot copper from a Copper-Cobalt-Nickel Matte. The method employed to separate Copper from Cobalt and Nickel was the electrolytic process. The information given is the result of my experience as Superintendent of the copper department for The Missouri Cobalt Company, Fredericktown, Missouri. In order to simplify the article, it shall be divided into four parts, namely (1) the quality of product delivered to the copper department; (2) the leaching plant; (3) the electrolytic plant; (4) the furnace refinery"--Page 1.

Efficient Field Methods For The Petroleum Geologist, Phillips Brooks Dolman

Professional Degree Theses

"The methods and systems suggested for the use of the petroleum geologist in the following manuscript are intended not only as subject matter for a thesis but also, I sincerely wish, that they may be of some use and help to those of The Missouri School of Mines who are planning to take up petroleum geology as a profession, but have not yet had the opportunity to study the practical or field end of this work ... This article is by no means intended as a text; the principal object being, as previously stated, to offer a few systems, methods, …

Preliminary Study Of Possible Power Development On The Gasconade River, Charles Russell Barnard, Ronald Blair Wills, Harry Wesley Zieseniss

Bachelors Theses

"The location of a possible dam site on the Gasconade River as a thesis proved to be a very interesting subject. Our first trip pointed out to us that we had undertaken a large task. We also realized that our subject was too big to complete thouroughly sic in the time alloted. Due to this circumstance we tried to cover the essential facts and to eliminate as much of the detail work as possible. For instance, we made no attempt to make a complete survey of the basin, instead, we ran surveys for some distance up the river to give …

The Microstructure Of Some Commercial Nickel Steels, Robert Newton Stubbs

Bachelors Theses

"In this thesis it was the author's intention to take up the microstructure of such nickel steel as is generally employed for structural work"--page 3.

Test 049: Wallis 15-25, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 001: Waterloo Boy N, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Tractor Test 7: Case 20-40, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 008: Rumely Oil Pull Model "E" 30-60, Nebraska Tractor Test Lab

Nebraska Tractor Tests

Test 008: Rumely Oil Pull Model "E" 30-60

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in …

Test 009: Rumely Oil Pull Model "H" 16-30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

Test 009: Rumely Oil Pull Model "H" 16-30

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in …

Test 006: Case 10-20, Nebraska Tractor Test Lab

Nebraska Tractor Tests

Test 006: Case 10-20

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the …

Test 019: Minneapolis-Moline Twin City 12-20, Nebraska Tractor Test Lab

Nebraska Tractor Tests

Test 019: Minneapolis-Moline Twin City 12-20

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition …

Test 031: Aultman-Taylor 15-30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 032: Aultman-Taylor 22-45, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 035: Coleman Model B 16-30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 033: Moline Universal Model D 9-18, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 037: Parrett Model K 15-30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 056: Monarck 18-30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …