Digital Commons Network^™

Assessment Of Quality Stability Of Composite Flours Produced By Dar Es Salaam Smes, Leonard Rweyemamu

Tanzania Journal of Engineering and Technology (TJET)

A study was conducted to assess quality stability of cereal flours processed by food processing SMEs in Dar es Salaam. This product is obtained by mixing various cereal grains and is considered as of higher nutritional values in Tanzania. The shelf-life was predicted by determining water activity (aw) and moisture content (MC) levels and plotting the water sorption isotherms (MSI). Ninety per cent of investigated samples (N=78) were found packaged in the materials of various quality conditions. It was found that the packaging materials mostly used is plastic films (63%), paper packets/bags (26%), hard papers (3%), plastic jars (1%) and …

Loss Modeling Of A Permanent Magnet Dc Motor Drive Water Pumping System, Nelson Lujara

Tanzania Journal of Engineering and Technology (TJET)

The paper presents an analytical approach to the determination of losses in each of the sub-systems of the Photovoltaic (PV) Permanent Magnet DC Motor (PMDC) drive water pumping system with and without maximum power tracking. The losses of the system at varying heads are firstly, determined using parameters from the data sheets and then validated by experimental results. The results are used to establish the head and the flow rate optimal operating point of the system.

Application Of Trip Generation Models For Urban Transport Planning In A Data Scarce Developing Country City: The Case Of Dar Es Salaam, Hannibal Bwire

Tanzania Journal of Engineering and Technology (TJET)

With the increase in travel demand and traffic management problems in many developing countries cities, travel demand forecasting models are being employed increasingly to make informed decisions about the operational improvements to the existing transportation system and the design and performance of future transportation systems. The main advantage of using travel demand forecasting models for such purposes is that they are capable of capturing the interactive effects of different components of the system under study. However, for some time now there have been concerns about the application of transport planning models in developing countries. The concerns have been mainly in …

Sustainable Development Of Biogas Resources In East Africa Using Transdisciplinary Design Models, Christopher M. Limiac

Open Access Theses

Installation of anaerobic digestion systems in urban developing communities has the potential to address multiple problems related to energy and sanitation in a combined systems approach. Anaerobic digesters are used to generate a relatively clean and rich source of energy in the form of biogas to address energy poverty issues. The design resources available for anaerobic digestion projects must be improved to provide greater technical support and project transparency. In order to develop holistic solutions to grand challenges like energy poverty, engineers must be prepared to operate with the complexities of diverse environments. Globalization and the improvement of transdisciplinary project …

Application Of Remotely Sensed Rainfall Data In Rainfall-Runoff Modelling. A Case Of Pangani River Basin, Tanzania, Joel Nobert

Tanzania Journal of Engineering and Technology (TJET)

Rainfall runoff modelling in a river basin is vital for number of hydrologic application including water resources assessment. However, rainfall data from sparse gauging stations are usually inadequate for modelling which is a major concern in Tanzania. This study presents the results of comparison of Tropical Rainfall Measuring Mission (TRMM) satellite rainfall products at daily and monthly time-steps with ground stations rainfall data; and explores the possibility of using satellite rainfall data for rainfall runoff modelling in Pangani River Basin, Tanzania. Statistical analysis was carried out to find the correlation between the ground stations data and TRMM estimates. It was …

Lemongrass And Cinnamon Essential Oils As Vitamin C Preservatives And Flavour Enhancers In Jam, Denice Byarushengo

Tanzania Journal of Engineering and Technology (TJET)

Lemongrass and cinnamon essential oils (LEO and CEO) are natural oils with high anti oxidation capacity, pleasant flavour, and various health benefits. Their ability to preserve vitamin C and flavour in jam have not been tested. In this study the performance of two essential oils (EOs) in preserving vitamin C and improving jam flavour were investigated. The EOs were produced by hydro-steam distillation of fresh lemongrasses and cinnamon leaves using a Clevenger apparatus. Jam samples were dosed with various concentrations of either single or mixed EOs and then stored at either room or refrigeration temperature. Samples were analysed for changes …

Accuracy Of Dem-Based Topographic Data In Flood Inundation Modelling: A Case Of Wami River, Tanzania, Preksedis Ndomba

Tanzania Journal of Engineering and Technology (TJET)

Ihe objective of this Biper is to evaluate and further convnent on the accuracy of the DEW- based topographic data us input in flood mchdelling. Recent studies have indicated that hydraulic of the modified sections based on high resolution are geometrically and hydraulically similar to the measured ones, In the study hydraulic modelling intended to guide a developnent project whereby a protection embankment is contemplated. Therefore, accuracy in terns of positioning/alignment of natural features such as river banks and heights/elevarions was imperative m arrain. In order m achieve these, accuracy of various topographic data sources were qualitatively and/or quantitatively before …

Analysis Of Different Techniques For Improving Performance Of Flat Plate Solar Collectors For Fruits Drying, Godfrey Mbabaye

Tanzania Journal of Engineering and Technology (TJET)

Fruits drying had become a broader technology in fruits and vegetables value addition. The technology is reported to be a promising way of drying without incurring higher cost but its adaptation has not been feasible in rural areas. Solar dryers have been developed but its poor performance limits its applicability. In this study, several techniques for modifications of traditional solar collector were addressed. It was observed that, varying collector designs in different techniques, a range of collector performances can be archived. The research shows that, collector efficiency can be improved by 9.6% when employing double duct counter flow compared to …

Noise Pollution In Maize Milling Smes, Erasto Elias

Tanzania Journal of Engineering and Technology (TJET)

Maize milling SMEs emit high levels of noise which can have adverse effects on human beings and therefore require controlling. This paper reports on a study that involved assessment and measurement of noise level in maize milling SMEs in DSM and Morogoro urban, gathering opinions of workers and the neighbouring population on noise problems, and suggesting solutions for noise control. Noise measurements in 41 SMEs were recorded from 89-103 dBA in DSM and 92-103 dBA in Morogoro near the milling machines. These values were higher than the safe level of 85 dBA for 8 hours working shift. Measurement also indicated …

Beneficial Reuse Of Locally-Available Waste Materials As Lightweight Aggregate In Lightweight Concrete, Brienna E. Rust

Dissertations, Master's Theses and Master's Reports - Open

This study investigated the physical characteristics of lightweight concrete produced using waste materials as coarse aggregate. The study was inspired by the author’s Peace Corps service in Kilwa, Tanzania. Coconut shell, sisal fiber, and PET plastic were chosen as the test waste products due to their abundance in the area. Two mixes were produced for each waste product and the mix proportions designed for resulting compressive strengths of 3000 and 5000 psi. The proportions were selected based on guidelines for lightweight concrete from the American Concrete Institute. In preparation for mixing, coconut shells were crushed into aggregate no larger than …

Analysis Of Power Efficiency Of A Direct-Driven Locally Fabricated Permanent Magnet Ac Generator For Small-Scale Wind Power Applications In Tanzania, Mussa Iddi Mgwatu Dr.

Tanzania Journal of Engineering and Technology (TJET)

The use of direct-driven permanent magnet alternating current (AC) generators offers the opportunity to reduced costs and increased system efficiency. This type of generator could be the best alternative for rural population whom are not connected to the national grid. To improve the design and efficiency of locally fabricated generators, it is imperative to characterize both their mechanical and electrical parameters. This paper presents the analysis of power efficiency of the synchronous permanent AC generator locally fabricated in Tanzania. In this case, load resistance and rotational speed are characterized using designed experiment. The output current and voltage of the generator …

Thermolysis And Kinetics Of Scrap Tyre And Bagasse For Energy Utilization, Petro Ndalila

Tanzania Journal of Engineering and Technology (TJET)

The increase of energy demand has brought concern to find alternative fuel that will at least sustain the requirement. Bagasse and scrap tyre are waste generated in our industrial activities, which can be used in energy production to subsidize the demand. This paper, aim to study the decomposition behaviour and kinetics of biomass (bagasse) and scrap tyre as preliminary stage of fuel sample analysis to be considered for energy production in gasification/combustion or pyrolysis facilities. The behaviour demonstrated with thermogravimetric analyzer (TGA), shows that all samples have high volatile amount release, 84.21% for bagasse and 85.08% for scrap tyre, which …

Analysis Of Factors Affecting Technological Innovativeness In Engineering Enterprises In Tanzania, Emanuel Mjema

Tanzania Journal of Engineering and Technology (TJET)

This paper discusses the technological innovativeness in engineering enterprises in Tanzania and analyses the factors affecting the innovativeness. It starts by analyzing various concepts regarding innovation, then analyzed from documentary review factors affecting innovativeness and then analyzed the innovativeness in Tanzanian enterprises. From the documentary review it was learnt that the following key factors influence technological innovativeness: Existence of innovation management; Existence of market to absorb the products of innovation; Existence of partnership between the universities and the firms; Existence of positive culture and politics towards innovation; The government playing its role to influence innovation; Existence of the right knowledge; …

Optimising The Performance Of Roundabouts In Dar Es Salaam City, David Mfinanga

Tanzania Journal of Engineering and Technology (TJET)

Intersections are one of the major bottlenecks that aggravate congestion in road networks; effective control of which is an important strategy in improving traffic flow. While developing countries have found it hard to adopt sophisticated means of intersection control, they have also not optimised the performance of roundabouts. This paper reviews the performance of roundabouts, which have become increasingly popular in recent years, as simple and low cost forms of intersection control. The performance of three major roundabouts in Dar es Salaam has been analysed and results show that roundabouts can accommodate high traffic volumes without causing excessive delays. The …

Traditional Boat Building: An Intersection Of Zanzibar’S Culture And Environment, Eric Levenson

Independent Study Project (ISP) Collection

This study examined traditional boat building on Uzi Island as a manifestation of Zanzibar’s relationship of environment and culture. Information was gathered about traditional boat building practices, the resource use and management pertaining to boats, the cultural reliance on boats, and local views on environment and conservation. This information showed that the people of Uzi Island were dependent on the use of traditional boats to maintain their livelihood, however the tree types used for boat building are being over-harvested. This tension of culture and environment exposed the need for conservation of Zanzibar’s natural resources in a manner that does not …

Gas Leakage Detection System (Glds), Daudi Simbeye

Tanzania Journal of Engineering and Technology (TJET)

This paper mainly focuses on the detection of gas leakage and providing security when the user is around or away from home. The system is Short Message Service (SMS) based and uses wireless technology for providing security against gas leakage to users hence cost effective and more adaptable. The system comprises of sensors for detecting gas leak interfaced to microcontroller that will give an alert to user whenever there is a gas leakage, display warning information by using Liquid Crystal Display (LCD), sending SMS to the user for notification wherever he/she might be and turning off electric power with the …

Isolation And Characterisation Of Micro-Organisms With Industrial Importance From Sisal Bole Rots, Consolatha Mhaiki

Tanzania Journal of Engineering and Technology (TJET)

Investigation of microorganisms naturally acclimatized to Agave hybrid H 11648 (sisal bole rot) was conducted, with the aim of isolating and characterizing Aspergillus niger strains for industrial use. Microorganism were identified morphologically and then confirmation made by polymerase chain reaction (PCR). Results showed the existence of four major groups, listed in order of abundances as follows; Aspergilli (36.0±0.8) %, Penicillin (28.0±0.1) %, Yeast (15.0±1.6) %and Fusarium (10.0±0.12) %. The main groups of Aspergilli strains were A. nidulans, A. tamari and A. niger in ratios (3:2:2), respectively. Several endo-spore forming non-enteric gram (-) rods and coccid bacteria identified by API 20 …

Improvement Of Hydraulic Press For Vegetable Oil Expression In Rural Areas, I. P. Bateebe

Tanzania Journal of Engineering and Technology (TJET)

Cultivation of oil producing crops especially Jatropha and croton as source of vegetable oil for biodiesel production is being encouraged in rural areas. To recover oil from seed, manual press is the feasible method in rural areas where there is no electricity. Research was conducted to improve hydraulic oil press machine for rural application. Factors affecting oil recovery were found to be: moisture content of seeds, operating pressure, seed oil content, and the amount of seeds pressed per batch. Percentage oil recovery was improved by reducing diameter of press cylinder, hence increasing expression pressure, and either reducing amount of seed …

Problems And Prospects Of Hydraulic Modelling For Environmental Flows Assessment Studies In East Africa, Preksedis Ndomba

Tanzania Journal of Engineering and Technology (TJET)

The objective of this paper is to document the problems and prospects of hydraulic modelling for Environmental Flows Assessment (EFA) studies based on selected case studies. Most of studies in East Africa use Holistic methodologies. An ideal data set for defining river hydraulics for most of these methods would be six data points of stage measurements over a good distribution of discharges, the stage of zero discharge and some flood-related data. Besides, in East African region EFA studies suffer from data scarcity (i.e., poorly gauged sites) and limited expertise and funding. The hydraulics studies conducted by the authors entailed desktop …

Open Source Kiswahili Spell Checker (Sw-Tz), Hashim Twaakyondo

Tanzania Journal of Engineering and Technology (TJET)

Different English software products are localized into many native languages spoken around the world, the most popular software products localized so far are word processing software and web browsers. The effort has begun to localize these software products in Kiswahili language which is widely spoken in Tanzania, East and Central Africa. Kiswahili is an official language of Tanzania, and is a national language in Uganda and Kenya. To make these software products useful to Kiswahili speaking community particularly in Tanzania a new Kiswahili spell checker has been developed and, it uses most of the Kiswahili words spoken in Tanzania and …

2d Autocad Geometric Data Extraction And Post Processing For Numerical Control, Tito Mwinuka

Tanzania Journal of Engineering and Technology (TJET)

In this paper, a method of extracting 2D geometric data from AutoCAD drawing and post processing for Numerical Control (NC) is presented. Geometric data already available in the Drawing Interchange Files (DXF) can be utilized to accurately and economically prepare part programs for controlling NC/CNC machine tools. AutoCAD, being general purpose software, stores its geometric data in a form that cannot be directly applied for automatic generation of Numerical Control (NC) codes. The way around the discrepancy between the structure of a drawing database (DXF files) and the information requirement for part programming is addressed in this work. NC programming …

Department Of Biological Systems Engineering Newsletter, Volume 7, Number 2, April 2013

BSE Department Magazine

No abstract provided.

Evaluation Of Geometric Design Needs Of Freeway Systems Based On Safety And Geometric Data, Eneliko Mujuni Mulokozi

UNLV Theses, Dissertations, Professional Papers, and Capstones

Freeways are arterial highways characterized by high levels of safety and high speed vehicular traffic. Access to and from the freeways is provided through ramps. Geometric elements making up freeway facilities include the roadway, median shoulders, grades, and ramps to and from the traveled way at selected locations, shoulders, radius of curvature, lane width, and speed-change lanes. With the increase of traffic using the freeway systems, there arises more traffic weaving movements within the elements making up the freeway systems. This causes traffic flow to compete at the limited spaces available and reduces safety performance of freeway system.

In studies …

Biorecognition Ability Of Polysaccharides As Piezo Quartz Biosensors, En Kalmykova, Ca Mgina

Tanzania Journal of Science

Piezoquartz biosensors (PQB) which are analytical devices for recognition of biochemical interactions have recently attracted increasing interest from different researchers such as analysts, immune-chemists, medical doctors, environmentalists, etc. This is due to the advantages of PQB for having high detection sensitivity (at ng and mg level depending on the mass of sorbates or micro-organisms) and the ability to monitor biochemical reactions in turbid or highly coloured liquids (including in biological fluids) in real time. The use of additional markers and preliminary sample preparation are not required in this biorecognition process. This paper reports on the principle of the PQB and …

Electrical Properties Of Dc Reactive Magnetron Sputtered Zno:Al Films From Optical Spectra, Pd Nsimama, Me Samiji

Tanzania Journal of Science

Reactive direct current (DC) sputtered ZnO:Al films were prepared using the plasma emission monitoring (PEM) system. Films were deposited using PEM setpoints ranging from 50 to 80%. Transmittance and reflectance of the films were measured by using the UV-VIS-NIR Lambda 900 double beam spectrophotometer. The sheet resistance was measured using the four-point probe. Films optical spectra were fitted with the Drude model to determine their charge carrier concentration, mobility and the alternating current (AC) resistivity. The highest values of mobility and charge carrier concentration were 8.31cm2/Vs and 2.14 x 1021cm-3 respectively. The lowest value of the AC resistivity was given …

Calling For Justice In The Goldfields Of Tanzania, Madoshi H. Makene, Jody Emel, James T. Murphy

Geography

Tanzania is the third largest gold exporter in Africa, thanks in part to the liberalization of the mining sector which started in the early 1990s. Neoliberal mining reforms promised a win-win situation in which government, investors and local host communities would benefit through export earnings, profits, local employment, andcorporate social responsibility initiatives (e.g., the building of schools and clinics). While the rising price of gold and foreign investments in mining activities have delivered on some of these promises, many residents in mining regions have not benefited socioeconomically. Worse still, their communities have unjustly borne the brunt of the environmental, social, …

Illicit Trafficking Of Radioactive Sources: Experiences With Fake Materials In Tanzania, Iddi Mkilaha

Tanzania Journal of Engineering and Technology (TJET)

Radioactive materials although are very useful, they are one of the catastrophic sources of mass destruction if misused. These materials have a number of positive uses which makes them very essential in our modern society. Incidences such as the bombings of the US Embassies in East Africa, the September 11, and many others had formed a basis for international responsive actions to control illicit trafficking of Radioactive and Nuclear Materials. The aim of this work is to track the movements and subsequently uses of these materials. Tanzania is one of the countries where International Nuclear Safeguards protocols are fully operational …

Flotation Circuit Performance Determination Using Size By Size Recovery – Case Of Bulyanhulu Gold Mine, Savinus Maronga

Tanzania Journal of Engineering and Technology (TJET)

The Bulyanhulu rougher flotation circuit performance has been determined by establishing the performance of individual cells. Direct sampling was done on all the rougher cell input, output and size analysis was performed on the samples with material in each size fraction assayed for copper and gold to determine their recoveries. It was observed that the performance of rougher cell number 3 and 4 was poor compared to other cells especially for finer particles below 53 µm where the recoveries were below 60%. In the last two flotation cells recoveries of both metals was very good (above 90%) in all particle …

Universal Design Of Transportation Systems: A Case Study Of Access And Mobility Of People With Disabilities At Selected Intersections In Dar Es Salaam, Nurdin Mushule

Tanzania Journal of Engineering and Technology (TJET)

The pedestrian facilities at intersections must be usable by pedestrians of all ages and capabilities. Intersections in particular must be designed to safely accommodate pedestrians of all ages and physical and mental abilities. Often, however, intersection designs fail to accommodate people with visual and mobility disabilities. In this regard, for pedestrians with disabilities, intersections can prove to be a challenge. Some of those challenges include provision of insufficient pedestrian clearance time due to use of inappropriate design pedestrian speed. Most importantly, the required facilities to enable People With Disabilities (PWD) to use the intersection without hindrance may be missing. Obstacles …

Analysis Of Factors Affecting Technological Innovativeness In Engineering Enterprises In Tanzania, Emanuel Mjema

Tanzania Journal of Engineering and Technology (TJET)

This paper discusses the technological innovativeness in engineering enterprises in Tanzania and analyses the factors affecting the innovativeness. It starts by analyzing various concepts regarding innovation, then analyzed from documentary review factors affecting innovativeness and then analyzed the innovativeness in Tanzanian enterprises. From the documentary review it was learnt that the following key factors influence technological innovativeness: Existence of innovation management; Existence of market to absorb the products of innovation; Existence of partnership between the universities and the firms; Existence of positive culture and politics towards innovation; The government playing its role to influence innovation; Existence of the right knowledge; …