Digital Commons Network^™

Safety And Resilience In Disaster Debris Removal And Clean-Up Operations: A Field And Training Guide For Resilience Workers In Disaster Debris Removal And Cleanup, Mohsen Shahandashti, Ph.D, P.E., Abhijit Roy, Ph.D, Zhe Yin, Ph.D, P.E., Pmp, Leed Ap, Antonio Balderrama, Ph.D, P.E., Sandesh Adhikari, Santosh Acharya

Mavs Open Press Open Educational Resources

A practical safety guide for the people who clear debris after disasters, and for the trainers who prepare them. Built for crews of every experience level--from seasoned operators to first-time volunteers--it teaches how to read a damaged site, recognize hidden and shifting hazards, work safely around heavy equipment and hazardous materials, and make sound decisions under pressure. Every chapter pairs clear guidance with a one-page field job aid, facilitator notes for trainers, and a real-world scenario, all grounded in OSHA, FEMA, EPA, and NIOSH guidance.

Safety and Resilience in Disaster Debris Removal and Clean-Up Operations Copyright © 2026 by Mohsen …

Integrated Fire Protection Design In Pharmaceutical Manufacturing Facilities: An Applied Case Study, Eman Osman Mahmoud Osman, Fouad Abdel-Mawgoud Abdel-Halim Qasim, Alaa El-Din El-Sayed Farid Hassan

HBRC Journal

The architectural design of pharmaceutical manufacturing facilities presents a complex engineering challenge, requiring simultaneous compliance with Good Manufacturing Practice (GMP) containment standards and life safety egress codes. This research presents an applied methodology for integrated fire protection design in sterile pharmaceutical environments, demonstrated through a case study of a manufacturing complex comprising cleanroom production zones and high-bay storage warehouses with heights reaching 14.8 m. The study reconciles facility classification under the Egyptian Fire Code and NFPA standards by defining Occupancy Hazard Groups W-1 and W-2 (high- and moderate-hazard storage), while utilizing regulatory Code Tables C-1 and C-2 to calculate occupant …

Cognitive Resilience At The Edge: Hyperdimensional Computing Versus Deep Learning For Hardware-Degraded Rf Classification, Adrian B. Cisneros, Jeong Yang

Military Cyber Affairs

Autonomous Collaborative Combat Aircraft (CCA) operating in contested electromagnetic environments must classify Radio Frequency (RF) signals on edge silicon that degrades over the mission lifetime due to thermal stress, radiation, and manufacturing variation. Deep neural networks dominate RF classification on pristine hardware, but their weights are precise and interdependent, causing catastrophic accuracy collapse as the underlying chip ages. We investigate whether Hyperdimensional Computing (HDC), a brain-inspired paradigm that distributes information across thousands of dimensions, can provide a reliability floor where Deep Learning fails. Using the RadioML 2016.10A dataset filtered to five digital modulations relevant to drone command-and-control links, we trained …

Hands-On Ransomware: An Experiential Wannacry Case Study For Undergraduate Cybersecurity Education, Eli Creek Richmond, Thomas R. Devine

Military Cyber Affairs

Ransomware represents one of the most disruptive threats in the cyber landscape, yet hands-on malware analysis remains rare in undergraduate cybersecurity curricula. This paper presents the design, implementation, and evaluation of an experiential learning module centered on the WannaCry ransomware case study, deployed in a senior-level course at West Virginia University. Students performed static and dynamic analysis using industry-standard tools. Pre- and post-module assessments demonstrated measurable gains in self-reported competency across seven technical dimensions. The module's competencies align directly with DoD Cyber Workforce Framework Work Role 212, Cyber Defense Forensics Analyst, supporting education-to-workforce pipeline development.

From Framework To Toolchain: Implementing Zero Trust Architecture In Cloud-Native Environments For Dow Compliance, Shelby C. Snyder

Military Cyber Affairs

Federal agencies face a fiscal year 2027 target for enterprise-wide Zero Trust deployment, but NIST SP 800-207A defines logical components without identifying the Kubernetes technologies that implement them. This paper proposes a three-tier mapping of the Policy Engine, Policy Administrator, and Policy Enforcement Point to service mesh, microsegmentation, and perimeter tooling, stating the criteria by which each component is classified. It then applies a defined rubric to six Zero Trust vendors across component alignment, Kubernetes capability, federal authorization posture, and evidence quality, finding that no single vendor covers all three tiers. The mapping is a testable architectural proposition; a Stage …

Semantic Shields: Automating Critical Infrastructure Defense Via Nlp-Driven Ransomware Profiling, Henry Trowbridge, Ian Zalcberg, Ryan Schley, Carter Yagemann, Natasha Phan, Srikar Maduposu, Vimal Buck

Military Cyber Affairs

Ransomware poses a growing threat to critical infrastructure, where successful attacks can disrupt operational technology (OT) and industrial control systems (ICS) with significant public safety consequences. However, attributing ransomware incidents to specific threat actors remains challenging due to ransomware-as-a-service ecosystems, actor rebranding, and the obfuscation of traditional indicators of compromise. This paper presents Semantic Shields, an NLP-driven attribution framework that leverages BERT-generated semantic embeddings and DBSCAN clustering to profile ransomware actors through the linguistic characteristics of ransom notes. Using a dataset of 295 ransom notes from 189 distinct threat groups, the framework achieved an 87.2% true positive clustering rate and …

Llm-Generated Countermeasures For Iot Cyberattacks, James Alger, Michael Tu

Military Cyber Affairs

The rapid expansion of the Internet of Things (IoT) has introduced significant cybersecurity challenges, particularly for resource-constrained devices that traditional intrusion detection systems often fail to protect effectively. This paper proposes a novel, two-phase autonomous security pipeline designed to bridge the gap between probabilistic threat detection and deterministic network enforcement. The framework first utilizes a custom Time Series Transformer (TST) to classify multivariate network traffic and identify specific attack vectors, such as ransomware, SQL injections, and malicious file uploads. In the second phase, an agentic AI layer, comprising a locally hosted Large Language Model (LLM) orchestrated via LangGraph, processes the …

Letter From The Director: Mastery In Practice, Joseph Schafer

Military Cyber Affairs

No abstract provided.

Main Challenges To China’S Scientific Research Instrument Innovation From Perspective Of The United States Export Controls, Jing Li, Daixie Chen, Qinghua Lin, Guohua Xiao

Bulletin of Chinese Academy of Sciences (Chinese Version)

China has long been heavily dependent on imports of scientific research instruments, making this sector particularly vulnerable to intensified technological containment by the United States and other Western countries and their efforts to maintain technological dominance. Since the Donald Trump’s tenure as the 45th president of the United States began in 2017, the United States has frequently used export controls to suppress China’s scientific and technological progress, posing great security risks to China. Based on a review of the development of scientific research instrument innovation in China, this article analyzes the updates and trends of the United States export controls …

Use Of Generative Ai Tools In An Undergraduate Engineering Design Course, Wei Yin, Esther Ocharo, Lillian Best, Harrison Martin

International Journal of Transformative Teaching and Learning in Higher Education

Generative AI tools are widely used by college students. This study aimed to investigate the best ways to teach students the limits of AI, especially in hands-on engineering classes. A class project in a sophomore biomedical engineering class was used to test the effectiveness of generative AI tools in supporting engineering CAD design and 3D modeling. Students were tasked with designing a finger basketball toy, creating 2D engineering drawings, and creating a physical prototype using 3D modeling and printing. Students used ChatGPT, Copilot, and Gemini to support the completion of the design project. Students’ manual work demonstrated satisfactory skills in …

A Quad-Port Dual-Band Elliptical Patch Mimo Antenna For 5g And Wlan Applications, Livingstone L. Kimaro, Hashimu Uledi Iddi, Mussa M. Kissaka, Neema S. Joseph

Tanzania Journal of Engineering and Technology (TJET)

A dual-band multiple-input multiple-output (MIMO) antenna for wireless local area network (WLAN) and fifth-generation new radio (5G NR) band n104 applications is presented. Two U-shaped slots interconnected back to back are etched on an elliptical shaped patch, four identical patch elements are then arranged orthogonally to form a quad-port antenna that resonates at 5.8 GHz and 6.7 GHz. Without additional extrinsic decoupling structures, the proposed design achieves measured isolation levels above 25.13 dB and 21.31dB, realized gains of 7 dBi and 7.2 dBi and -10 dB impedance bandwidths of 155.4 MHz and 90 MHz in the lower and upper frequency …

Design Of Permanent Magnet Synchronous Motor For Railways Traction Application, Anna S. Mwang'onda, Jackson J. Justo, Francis Mwasilu

Tanzania Journal of Engineering and Technology (TJET)

This paper presents the design of surface mounted permanent magnet synchronous motor (SMPMSM) intended for traction applications in standard gauge railway (SGR) for passengers. The proposed motor is rated 350 kW with a base speed of 3000 rpm. Moreover, speed control strategy with stability analysis is incorporated in the design to validate the performance of the SPMSM. The simulation results achieved a torque of approximately 1115 Nm at a terminal voltage of 800 V. The flux linkage of 150 mVs which ensures effective electromagnetic pertinence while maintaining safe magnetic loading because the flux density is less than 1.5 T. The …

Thermal Monitoring Of Solidification In Molded Casting Of Drone Landing Leg, Sadettin Cem Altıparmak, Maher Zayed, Samuel Hawk, Mohamed Baddi, Jesus Degollado, Ahmed Bendaouia, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

This paper presents the design, fabrication, and thermal characterization of an acrylonitrile butadiene styrene (ABS) mold produced by fused deposition modeling (FDM) extrusion-based additive manufacturing used for the wax casting of a drone landing leg. A thermal monitoring framework, consisting of four K-type thermocouples logged at 1 s intervals, was deployed across six casting trials to capture the complete solidification cycle, yielding 84,717 time-stamped measurements. The study focuses on thermal data analysis and materials science interpretation through descriptive statistics, normality diagnostics, inter-trial Kruskal–Wallis tests, phase-duration analysis, rolling-variance monitoring, and inter-channel Pearson correlation. Key findings include a persistent spatial temperature hierarchy …

Exploring The Role Of Single Pilot Operations In Night Cargo Aviation: A Phenomenological Study, Kollin Ellis

Doctoral Dissertations and Projects

The purpose of this qualitative descriptive phenomenology was to examine the lived experiences of pilots who have operated alone at night in an aviation cargo environment. The design was guided by an epistemological philosophical assumption. Extreme advancements in the technology of artificial intelligence and their applications in the aviation industry have raised the question of the value of a single operator serving in commercial cockpits. Some experts argue that a two-person crew is unnecessarily redundant. A significant gap in the current literature of experiential data existed to prompt this study. Through the contextual lens of the Dual Process Theory and …

Application Of Machine Learning To Discover Dynamical Structures In 4d Poincaré Maps In The Circular Restricted Three-Body Problem, Kevin M. Trigg, Daniel J. Broyles, Robert A. Bettinger, Tyler J. Kapolka

Faculty Publications

The spatial Circular Restricted Three-Body Problem (CR3BP) produces complex orbital dynamics that are difficult to classify at scale using traditional, manual Poincaré map analysis. A Poincaré map simplifies continuous orbital motion by recording the points where a trajectory intersects a chosen surface in phase space, converting a continuous path into a discrete set of crossings that reveal underlying topological structure. These crossings make it easier to characterize trajectory behavior, but interpreting them visually becomes impractical for large datasets and as Poincaré maps evolve from two into four dimensions. To address this challenge, an unsupervised clustering pipeline for discovering dynamical structures …

Comparison Of Gravity Separation And Flotation For Pyrite Recovery From Tailings, Gülay Bulut, Gönül Göksu Gökçe, Dilruba Karamanlı, Oğuzhan Mert Gürkan, Ergin Sarp Zenzirci, Binnur Kırım, Alim Gül

Journal of Sustainable Mining

Tailings generated during the production of lead, zinc, and copper concentrates contain significant amounts of sulfide minerals, particularly pyrite. Pyrite, which remains in tailings after the recovery of other metals, is one of the main contributors to acid mine drainage (AMD). Therefore, recovering pyrite from tailings is environmentally and economically an important issue. In this study, pyrite recovery from tailings was investigated using flotation and gravity separation methods. Mineralogical characterization and liberation analyses were conducted by Mineral Liberation Analysis (MLA), indicating that pyrite is the major sulfide mineral with over 76% liberation degree even in the coarsest fractions. Flotation tests …

Challenges, Trends, And The Role Of Lstm In Ai-Based Predictive Maintenance Of Electrolyzers For Solar Hydrogen Systems: A Review, Yani Koerniawan Kuatno, Muhamad Zahim Sujod

Turkish Journal of Electrical Engineering and Computer Sciences

The transition toward low-carbon energy systems has increased interest in hydrogen as a clean energy carrier, with solar-driven water electrolysis emerging as a promising technology due to its high efficiency and compatibility with renewable energy sources. However, dynamic operating conditions and intermittent renewable input accelerate electrolyzer degradation, reducing reliability and system lifespan. Predictive maintenance (PdM), supported by artificial intelligence (AI), offers a data-driven approach to anticipate failures and improve operational durability. This review systematically investigates AI-based PdM approaches for electrolyzers, with an emphasis on long short-term memory (LSTM) networks and Internet of things (IoT) integration. Following PRISMA 2020 guidelines, 35 …

Dynamic Focal Loss Adjustment For Railway Defect Detection, Mehmet Koç, Ridvan Özdemi̇r, Ömer Gerek

Turkish Journal of Electrical Engineering and Computer Sciences

Railway infrastructure is critical to the safe and efficient operation of transportation systems, and the early detection of defects is essential for preventing catastrophic failures. Automated defect detection methods are therefore crucial for maintaining continuous safety while reducing maintenance costs. Although Focal Loss is widely used in object detection under class-imbalanced conditions, its fixed α parameter may limit its effectiveness in detecting rare defects. In this study, we propose an adaptive α-tuned Focal Loss approach that dynamically adjusts class weights based on average precision (AP) values. By iteratively optimizing α without relying on gradient-based optimization, the proposed method improves the …

Relative Rate Observer-Based Online Tuning Mechanism For Single-Input Interval Type-2 Fuzzy Pid Controllers, Oqba Aldreiei, Cenk Ulu, Mert Can Kurucu, Müjde Güzelkaya

Turkish Journal of Electrical Engineering and Computer Sciences

The characteristics of the footprint of uncertainty (FOU) in interval type-2 membership functions (IT2-MFs) are crucial to the performance and robustness of interval type-2 fuzzy controllers (IT2-FCs). However, existing IT2-FC design approaches mostly use fixed FOU structures. This study proposes an online membership function (MF) adjustment mechanism for a single-input interval type-2 fuzzy PID controller (SIT2-FPID)  that adjusts the FOU of the antecedent MFs and weights of the consequent MFs, respectively, to achieve high performance and robustness. The proposed online adjustment mechanism consists of a relative rate observer (RRO), a two-input rule-base adjustment system, and a first-order smoothing filter. The …

Cuip-X25: A Real-World Network Intrusion Dataset For Next-Generation Ai-Driven Security, Arshad Iqbal, Sohail Asghar

Turkish Journal of Electrical Engineering and Computer Sciences

The efficacy of artificial intelligence (AI) in intrusion detection systems (IDS) is critically dependent on high-fidelity training data. However, as detailed in the manuscript's literature review, existing benchmark datasets are predominantly synthetic, outdated, or imbalanced and fail to capture the complexity of the contemporary threat landscape. To bridge this gap, this study introduces CUIP-X25, a novel real-world cyber-attack dataset captured over a four-month period using a dionaea honeypot deployed on a public network. Unlike synthetic alternatives, this dataset provides an authentic representation of modern adversarial tactics, techniques, and procedures, encompassing 3.16 million real events across ten distinct attack categories, including …

Robust Load Frequency Control For Multiarea Electrical Power Systems Via Analytical Proportional-Integral-Derivative Plus Second Order Derivative Controller Design, Yavuz Güler, Mustafa Nalbantoğlu, Ibrahim Kaya

Turkish Journal of Electrical Engineering and Computer Sciences

This research presents a proportional-integral-derivative plus second order derivative (PIDD2) controller design based on the Direct Synthesis Method (DSM) for load frequency control (LFC) of interconnected power systems. The parameters of the proposed PIDD2 controller are determined using the DSM, which offers an analytical approach for tuning. The design approaches have been developed specifically for single, two, and three-area power systems, encompassing nonreheated and reheated thermal turbines. In the proposed design method, the best values of PIDD2 controller parameters were found by using a multicriteria objective function that includes the integral of absolute error (IAE) and settling time. In response …

Boundary Layer Sliding Mode Control Strategy For Variable-Speed Compressor In Deep Freezers: Experimental Validation Of Energy Efficiency And Freezing Capacity, Sertan Aksoy, Kami̇l Çeti̇n, Sezai̇ Taşkin

Turkish Journal of Electrical Engineering and Computer Sciences

This study presents the design and experimental validation of a nonlinear sliding mode controller developed for a deep freezer equipped with a variable-speed compressor. The proposed control strategy aims to minimize energy consumption while maintaining rapid and stable cooling performance under varying ambient conditions. A detailed thermal model of the deep freezer was established using an equivalent resistance–capacitance network representation, enabling precise analysis of temperature dynamics. The sliding mode-based control algorithm dynamically adjusts the compressor’s operating frequency according to temperature deviation, ambient conditions, and time-dependent factors, providing robust performance without requiring parameter retuning for different models. Beyond theoretical-based analysis, a …

Empowering Edge Intelligence Through Reparameterized Lightweight Transformers And Distributed Inference, Hosein Esmaeili, Mohammad Ali Afshar Kazemi, Reza Radfar, Nazanin Pilevari

Turkish Journal of Electrical Engineering and Computer Sciences

Deploying advanced transformer-based models on resource-constrained edge devices remains a significant challenge due to their high memory footprint and substantial compute requirements. In this paper, we propose a reparameterized transformer framework that integrates High-Rank Factorization (HRF) during training, layer merging at inference, and dynamic, load-balanced distributed inference across multiple devices. To further reduce resource usage, our framework supports mixed-precision quantization down to 4-bit, enabling flexible accuracy–latency–energy trade-offs. Experimental evaluations on the ESC-50 environmental sound dataset demonstrate that our method matches or exceeds the performance of larger baseline models while using 20–30% fewer parameters, achieving up to 48% latency reduction in …

Common Ground Newsletter Fall 2026, Missouri University Of Science And Technology

Common Ground

- Q&A Experiences

- Shaping the next generation

- Chi Epsilon earns four awards

- Summer Camps

- Design Team Results

Measurement-Aware Zero-Phase Iterative Learning Control For Robust Regulation Of Nonideal Boost Converters In Electric Vehicle Fast Charging, Aytaç Altan, Mohammed S. Alzaidi, Cağfer Yanarateş

Turkish Journal of Electrical Engineering and Computer Sciences

Integrating battery energy storage with DC-DC boost converters for electric vehicle fast charging exposes the regulator to ageing-induced parameter drift, periodic load pulses, and, critically, the nonidealities in the output-voltage sensing chain. This paper proposes a measurement-aware, zero-phase iterative learning control scheme for robust output-voltage regulation of a nonideal boost converter whose parameters are matched to those of a commercial Texas Instruments TPS6102x battery regulator. The controller combines an inner proportional-integral stabilizing loop with an outer zero-phase learning law that updates a feedforward correction based on the sensor-captured output trajectory; a forward-backward robustness filter suppresses the amplification of measurement noise …

Degree Assortativity And Estimation Of Degree Distribution In A Contact Network Of People Who Inject Drugs, Peter Geissert

Dissertations and Theses

This dissertation analyzes data from a respondent driven sampling (RDS) study of people who inject drugs in Portland, OR.  The objective was to assess assumptions for the use of weighted estimators to estimate a population physical contact (syringe sharing) network degree distribution.

Visualization of degree distribution for social and physical networks, Kolmogorov-Smirnov tests of difference, and kernel tests of equivalence were used for comparison of distributions. Spearman's rho and GAM non-parametric regression models were used to test for association and assess non-monotonic relationship. The validity of Markov chain assumptions for RDS was assessed using a transition matrix, Markov chain graphs, …

A Binary Multiobjective Hippopotamus Optimization Algorithm For Feature Selection In Phishing Website Detection, Fatima Belmessaoud, Sofiane Maza, Djaafar Zouache

Turkish Journal of Electrical Engineering and Computer Sciences

Phishing website detection remains a major challenge in cybersecurity as attackers continuously develop new techniques to deceive users. Identifying the most informative features from large datasets is essential to improve classification accuracy while reducing computational complexity. Feature selection is therefore widely addressed using metaheuristic optimization techniques due to their flexibility and global search capability. In this study, we propose a Binary Multiobjective Hippopotamus Optimization Algorithm (B-MOHOA) for feature selection in phishing website detection. The proposed method simultaneously optimizes two conflicting objectives: maximizing classification accuracy and minimizing the number of selected features. Unlike many existing studies that mainly focus on transfer …

Range–Angle-Dependent Oam Beamforming With A Concentric Helical Circular Fda, Uğur Yeşi̇lyurt

Turkish Journal of Electrical Engineering and Computer Sciences

Secure and spatially selective wireless transmission requires orbital angular momentum (OAM) beams that are confined to a specific range and angle, rather than propagating indefinitely along the beam axis. In this paper, a concentric helical circular frequency diverse array (CHCFDA) is proposed to generate range–angle-dependent OAM beams without requiring external phase shifters. The helical element positioning inherently provides the necessary interelement phase distribution through physical step height, while logarithmically increasing frequency offsets are applied across concentric rings—and optionally across individual elements—to eliminate range periodicity and achieve a single, well-focused OAM beam exclusively at the target location. Both linear and logarithmic …

Can Artificial Seagrass Meadows Reduce Pathogenic Bacteria In Coral Reef Ecosystems- A Mesocosm Study, Hewa Pathirannahelage Athri Thathsarani Weerakoon, Jimmy Kuo, Pi-Jen Liu, Kwee Siong Tew

Journal of Marine Science and Technology–Taiwan

Seagrass meadows provide essential coastal ecosystem functions by stabilizing sediments, enhancing water quality, and shaping nutrient and microbial dynamics. With global seagrass losses accelerating due to climate change and anthropogenic pressures, artificial seagrass (ASG) has been proposed as a nature-based alternative to mimic these functions. However, its ability to replicate biological interactions, particularly microbial regulation and pathogen suppression, remains unclear. In this study, we conducted a six-week mesocosm experiment comparing natural Thalassia hemprichii and ASG within coral reef-associated habitats in southern Taiwan. Physicochemical parameters, sedimentation rates, nutrient concentrations, and planktonic and benthic bacterial communities were analyzed. Sedimentation rates and nutrient …

Enhancing The Bearing Capacity And Settlement Performance Of Soft Clay Using Geocell Reinforcement: A 3d Numerical Parametric Study, Alaa Ata, Engy E. Elbasuny, Ayman Metodiev El-Zohairy, Marwa Nabil

Faculty Publications

Problematic soils pose a risk to structures due to excessive or uneven settlement, swelling, and limited bearing capacity. To address some of these issues, mechanical reinforcement using geosynthetic products such as geocells can be employed, given their ease and speed of implementation. The purpose of this study was to assess the impact of geocells on the behavior of soft clay soil in Port Said, Egypt, using a three-dimensional finite element model, namely, the PLAXIS 3D software. The results show that replacing the top 1.5 m of the soft clay with sand significantly reduced settlement. This improvement was further enhanced by …