Digital Commons Network^™

Test 106: Hart-Parr 16-30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 110: Case 25-45, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 102: John Deere D 15-27, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: John Deere D

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker, point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST …

Test 108: Monarch Model D 6-60 40-60, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Accident Prevention In Cement Plants, Edward Rees Abbott

Bachelors Theses

"The cement industry as a whole took up accident prevention work along with the pioneers. With the organization of the Portland Cement Association, a Bureau of Accident Prevention was formed. This Accident Prevention Bureau, by sending out literature, holding competitions, collecting and tabulating results of accidents collected from every cement manufacturer and affiliating with National Safety Council as the Cement Section, has made rapid strides each year, until today it is doubtful if any other branch of manufacturers can show more improvement in accident records than the cement industry. In spite of their marked improvements each year, there were 47 …

Test 102: John Deere Model D 15-27, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 103: Oil Pull Model S 30-60, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 107: Hart-Parr 12-24, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 109: Case 18-32, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Transmission Of Electrical Energy At 220,000 Volts, Robert Wilhelm Ahlquist

Bachelors Theses

"A. E. Silver at the Annual Convention of the A.I.E.E. in 1919 gives some of the reasons why 220,000 Volt transmission is a logical and feasible commercial proposition. He also gives some of the main features of the undertaking...Owing to the great scope of this paper it has been thought necessary to generalize on the discussion of the first two topics and to treat the next two in more detail"--Statement of Scope of this Paper, pages 3-4.

The Solubilities Of Certain Inorganic Salts In Anhydrous Normal Alcohols, William Orval Keeling

Masters Theses

"An examination of the literature shows that extensive studies have been made of the solubilities of inorganic salts in aqueous, normal alcohols, but that little has been done in determining the solubilities in anhydrous alcohols. Northing was found of a systematic study of the solubilities of NaCl, KCl, NaN0₃ and KNO₃ in the lower alcohols over a fairly wide range of temperature. The author has made a study of the solubilities of the above mentioned salts in lower anhydrous normal alcohols at the temperatures 20°C, 25°C, 30°C and 40°C"--Introduction, page 1.

The Reduction Of Zinc Oxide By Carbon, George August Zeller

Masters Theses

"In spite of the fact that the reduction of zinc oxide by carbon is the fundamental reaction upon which the pyrometallurgy of zinc is based, there is a decided lack of accurate knowledge concerning the mechanism of the reaction, the temperature at which it begins, and the effect of various factors upon the rate at which it takes place"--Introduction, page 1.

On Plain Carbon Steel, Walter Edward Remmers

Masters Theses

"In 1921, an investigation was carried on by Messrs. Howe, Foley and Winlock, under the auspices of the National Research Council, the results of which were published under the title of - "Influence of Temperature, Time and Rate of Cooling on Physical Properties of Carbon Steel," by the American Institute of Mining and Metallurgical Engineers, February, 1923. These results showed that all physical properties of a 0.34 C. percent steel are improved by increasing the rate of cooling from temperatures above the critical range up to a certain rapidity beyond which, there is a gain in strength at the expense …

An Investigation Of The Possibility Of A Missouri Furnace Obtaining An Iron Ore Supply From The State, Donald Foster Updike

Professional Degree Theses

"The material for this thesis and the observations and conclusions drawn are all the result of the writers connection with a group who were engaged by Brown Brothers to determine the possibility of supplying the St. Louis Coke and Chemical Company with iron ore from the state. The original idea was to try to obtain the Coke Companies complete requirement from the state. While the results are in a sense negative, the company appreciated the fact that, in a case of this kind, even negative results have a value"--Introduction, page 4.

The Outdoor Substation, Israel Herrick Lovett

Professional Degree Theses

"The Outdoor Substation, as an essential part of a high voltage distribution system, has been largely developed during the past 12 years. The New England Power Company was one of the pioneers in this development, their substation at Millbury, Massachusetts, being one of the first outdoor substations in the northern part of the country. During the five years' experience with this company, the writer of this thesis, in his position of Chief Electrical Designer, was partly responsible for the design of all substations constructed by the company during this period, from 1916 to 1921...This thesis is an account of the …

A Discussion Of Electric Welding, Peter Fergus Thompson

Bachelors Theses

"This thesis deals with the different processes, methods and uses of Electric Arc Welding; and tests made in the laboratory with Direct and Alternating Current"--page iii.

The Movement Of Ground Water And Its Relation To The Drainage Of Irrigated Lands, Ernest O. Larson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

One needs but to review the history of the irrigated projects of the West to see clearly the importance of drainage. Since the passing of the Reclamation Act in 1902, the construction of drainage work by the United States Reclamation Service on seventeen projects located in thirteen western states represents about 12 percent of the expenditures from the Reclamation Fund. The portion for drainage has been spent during the last few years. This work has required an annual expenditure of about $1,000,000 or a total of $8,000,000 to July, 1922⁽¹⁾. The work completed is estimated to have reclaimed …

Test 98: Best 60, 40-60, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 089: Avery "Track-Runner", Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 090: Case 40-72, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 091: Case 12-20, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 095: Mccormick-Deering 10-20, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 092: Wallis Ok 15-27, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 096: Avery 20-35, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 093: Russell Model C 15-30, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 098: Best 60 40-60, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 097: Hart-Parr 40, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 090: Case 40-72, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: Case 40-72

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker ,point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST B: …

Test 095: Mccormick Deering 10-20, Nebraska Tractor Test Lab

Nebraska Tractor Tests

EXPLANATION OF TEST REPORT: McCormick-Deering 10-20

TEST A: The manufacturer's representative operates the tractor for a minimum of 12 hours using light to heavy drawbar loads in each gear.

This serves as a period for limber up, general observation and adjustments. Adjustments that are permissible include valve tappet clearance, breaker, point gap, spark plug gaps, clutch and others of a similar nature. No new parts or accessories can be installed without having mention made of it in the report. No data' are recorded during this preliminary run except the time that the engine is operated.

BELT HORSEPOWER TESTS

TEST B: …

The Construction, Equipment And Operation Of The Second Largest Oil Refinery In Mexico, Arturo C. Fernandez

Professional Degree Theses

"In the preparation of this thesis the writer has endeavored to describe in a clear, concise and simple manner the general scheme carried out by the Foundation Company in the construction, equipment and operation of the Corona Refinery at Chijol, Veracruz, Mexico.

Under construction, the most interesting features of the work executed by the Field Engineering department have been discussed at some length. Throughout this paper elementary details have been omitted, the casual reader being assumed to possess a knowledge of the fundamental principles of engineering.

No attempt has been made to cover the activities of the allied--mechanical, electrical, architectural--departments …