Digital Commons Network^™

A Survey Of Medical Diagnostic Software, Steven Stein

Retrospective Theses and Dissertations

The field of medical diagnostic software is reviewed to define its status in the medical profession. This is accomplished in a two-step procedure. The first step is a cross-section of literature on the topic, and the second step is a survey of physicians in a sample area. The cross-section of literature presents some of the more advanced studies which have been conducted on medical diagnostic software. Also presented is an explanation of the logic used in diagnostic software and the results of several test cases. The survey was of physicians in the Orlando, Florida area to define the actual application …

Disposal Of Cattle Feedlot Wastes By Anaerobic Digestion, Eric Bayard Rapp

Masters Theses

"Disposal of animal waste represents a severe environmental problem, particularly in areas such as cattle feedlots where livestock are concentrated. Animal waste can be converted to carbon dioxide and methane by the autocatalytic process of anaerobic fermentation. A scheme, based upon this process, for the disposal of the waste from two different size feedlots is presented. The design of this process is based on kinetic data from the literature which are fitted to a kinetic model including diffusional resistances. Economic calculations based upon available cost data are made to determine the profitability of the process. Economic evaluations indicate that this …

Precipitation Of Carbon From Martensite In Ductile Iron, Devendra Ratilal Majmundar

Masters Theses

"Since metallographic studies of quenched and tempered cast iron have indicated that the carbon might precipitate directly as graphite rather than as carbides which are found in steels, this investigation used the Debye-Scherrer x-ray diffraction technique to examine electrolytically extracted residues from quenched and tempered ductile cast iron samples to determine if cementite was present. The precipitation of carbon in quenched samples of this ductile cast iron was found to be similar to the precipitation process in steels. Cementite was identified during the early stages of the tempering process when the tempering temperature was 800 degrees F, 900 degrees F, …

Attitude Scaling As A Public Involvement Tool In The Lower Mississippi River Region Comprehensive Study, William A. Lee

Masters Theses

"The planner is under considerable pressure to involve the public in water resource planning. The public, however, often lacks sufficient knowledge to offer useful comments or suggestions. The use of a Likert Type Attitude Scale in the public involvement effort of the Lower Mississippi Region Comprehensive Study demonstrates the usefulness of attitude scaling techniques in obtaining public input to the planning process. The measurement of an individual's attitude, or his thoughts, feelings and disposition to act toward some aspect of his environment with some degree of consistency, gives an indication of the goals and objectives toward which a plan acceptable …

Relative Volatility In The System 1-Butene - N-Butane, Steven Lewis Walker

Masters Theses

"An apparatus suitable for the rapid collection of P-x data at constant T is described. Isothermal P-x data at 40, 70, 100, 130, and 160 degrees Fahrenheit at the extremes of the composition range for the 1-butene - n-butane system are presented as a demonstration of the suitability of the device for its intended purpose. Limiting values of the relative volatility for the binary are presented. The relative volatilities were calculated using limiting forms of the general coexistence equation which are given in the literature. Several recommendations are given for improvements of the equipment and experimental technique"--Abstract, page ii.

Parametric Resonance Of A Beam Subjected To A Sawtooth, Axial Force, Alfred George Richardson

Masters Theses

"This study considers the response of a perfectly elastic straight beam subjected to a periodic, non-harmonic, axial load. A two-mode solution is sought and the effects of axial inertia are included in the analysis. General equations of motion for the beam are developed and their stability is studied with the aid of an analog computer. Results are presented in graphical form. Regions of instability are defined for both modes. A region of combination resonance is also found to occur for the case of a two-mode solution with axial inertia. Typical response curves are presented and the effects of axial inertia …

Mass Transfer Coefficients Determined By Simplex Optimization Techniques, Charles Ferris Callihan

Masters Theses

"The objective of this thesis is to develop a method for obtaining individual mass transfer coefficients in absorption columns. There are two assumptions which apply throughout the thesis. The first assumption is "plug flow." The second assumption is that the axial concentrations can be measured accurately enough.

The problem is approached by simulating data generated from a mathematical model of an absorption column. A response surface is defined which is a function of the individual mass transfer coefficients. The lowest point on the surface locates the individual mass transfer coefficients for the system in question.

The mathematical model of the …

The Effect Of Explosive Charge Length Of Cratering, John M. Mason

Masters Theses

"In an attempt to determine the influence of charge length upon cratering, a series of small scale model blasting experiments were conducted in Plexiglas, Hydrostone, mortar and dolomite, using mild detonating fuse as the explosive charge. Single hole blasts were simulated, with the blasthole being drilled normal to one free face and parallel to a second. The resultant craters were photographed and closely studied. Particular attention was paid to effects of variation of charge length and burden upon cratering.

The investigation showed the importance of radial fracturing and the dominance of gas pressure in explosive crater formation from elongated cylindrical …

An Investigation Into The Degree Of Correlation Between Air Flow Rates, Bacteria In The Air And Post-Operative Infections In Hospitals, Carl Eugene Intag

Masters Theses

"Post-operative infections are a recognized problem in the medical and hospital professions. Annual costs and deaths due to infections in the U.S.A. have been estimated at $8-$9 billion and 10,000 lives respectively. The air lS one potential path in transporting contaminants that may cause an infection. Yet, the degree of influence airborne contaminants have in causing infections is a topic of much debate. As a result of the need for more information in this area, this investigation was undertaken to determine the degree of correlation between post-operative infection rates, bacteria in the air, and air flow rates.

Data for the …

The Linear New City -- A Pattern For New Cities Based On Efficiency Of Transportation, Public Services, And Land Use, Elbridge Wesley Bartley Iii

Masters Theses

"The linear new city is defined as a city consisting of some arrangement of relatively narrow, high-density strips, served by various mass transportation systems. Such a new city would be ideally suited to the implementation of the latest technology. The concentration of development along the transportation route would allow certain economies in the supply of utilities and services, as well as insuring that open space would be readily available around and throughout the city. The provisions for transportation, housing, and governmental control should combine to produce a better quality of life for the inhabitants of the linear new city"--Abstract, page …

Nutation Control During Precession Of A Spin-Stabilized Spacecraft, Richard James Donner

Masters Theses

"The effects of precession thrust pulses and energy dissipation upon nutation of a spin-stabilized spacecraft are studied. Methods for controlling nutation during a precession maneuver are proposed and examined. In particular, a precession modulation control law is developed which uses precession thrust pulses to control nutation. Digital simulations show that precession control with separate nutation control is the fastest precessing system; however, the precession modulation method is only fractionally slower while not requiring a separate nutation control system"--Abstract, page ii.

Ideal Filter Approximation And Synthesis, Patrick Shu Yau Ho

Masters Theses

"Several methods are currently used for approximating the ideal low pass filter. Generally, those approximations relate only to the amplitude or phase characteristic of the ideal filter. A class of filters has been proposed as approximating both the amplitude and phase characteristics of the ideal filter. The characteristics of the first ten members of the proposed class are considered in this paper. The results indicate a much improved approximation to the ideal filter has been achieved"--Abstract, page ii.

A Study Of The Dynamic Loading Of Hydrodynamically Lubricated Journal Bearings, Nader Khorzad

Doctoral Dissertations

"The analytical and experimental investigation presented here examined the response of a full journal bearing to a unidirectional dynamic load. Frequency response of the bearing at different eccentricity ratios was investigated. It was concluded that the response of the bearing varies with eccentricity. The experimental data obtained was compared to an analytical model which considered inertial, damping, and elastic characteristics of the lubricant film. An investigation of film pressure revealed that the pressure due to journal center acceleration is smaller than the hydrodynamic and squeeze-film pressures"--Abstract, page 1.

Prebainitic Phenomena In Aisi 86b80 And 0.8c-5.3ni Steels, Chung Lim

Doctoral Dissertations

"An ultrasonic investigation shows that the prebainitic kinetics of AISI 86B80 and 0.8C-5.3Ni steels follow t^2/3 and or t¹ time laws in the lower bainite temperature region. The data analysis indicates that these kinetics signal carbon segregation to dislocations. The simple time laws are interrupted at the bainite start time. It is shown that at this time the carbon depleted regions around dislocations transform martensitically. The lower bainite reaction is thus initiated by the formation of supersaturated ferrite through carbon segregation and the subsequent local martensitic transformation"--Abstract, page iii.

Applications Of Frequency Domain Stability Criteria In The Design Of Nonlinear Feedback Systems, Allen Joseph Rushing

Doctoral Dissertations

"The Popov criterion for absolute stability of nonlinear feedback systems is applied to several example problems. Model transformations such as pole shifting and zero shifting extend the class of systems to which the criterion applies. Extensions of the criterion having simple graphical interpretations yield stronger results for systems with constant monotonic slope-bounded nonlinearities. Additional extensions lacking simple graphical interpretations in the complex plane are also demonstrated by example.

Stability throughout a region in parameter space is discussed, and the Kalman conjecture is verified for a new class of systems. The Popov criterion is also used to prove BIBO stability, process …

Electro-Reduction Of Bromate On Mercury, Jaw-Shin Chang

Doctoral Dissertations

"The electrochemical reduction of BrO⁻₃ was studied on a stationary Hg electrode in neutral and basic solutions containing K⁺, Na⁺, and L⁺. Coulombic efficiency studies showed Br⁻ to be the predominant reduction product. The steady state kinetic parameters include Tafel slopes of ca. -0.120 V, approximate first order activity dependences for both BrO⁻₃ and the accompanying cation, and no pH dependence. A reaction scheme is proposed which involves BrO⁻₃ "bridged" to the electrode by the accompanying cation. It is suggested that the "bridging" is a result of ion-pairing in the electrical double-layer"--Abstract, page 1.

A Study On Conical Rocket Stabilization, Thomas Dombeck

Journal of the Minnesota Academy of Science

The objective was to develop a finless model rocket . The idea evolved after seeing the Army's Sprint anti-ballistic missile, which is conical in shape and does not have fins for primary aerodynamic stabilization . In designing the model rocket, a scale drawing was made, and center of gravity (CG) and center of pressure (CP) computations transferred to it. The initial design proved unstable because the CG and CP were too close together. Another drawing was made with the addition of a payload section to carry necessary weight to allow moving the CG forward. This second design was mathematically stable. …

A Formal Description Of The Nova-800 Computer In Computer Design Language, Ronald Lee Engelbrecht

Masters Theses

"This paper presents a formal description of the operation of the NOVA 800 in Computer Design Language (CDL). For simplicity, the description does not include specific input/output devices, the multiply/divide option, or data channel operations. The description is intended to be used as a supplement in a basic course in computer organization, and an example of its use is included"--Abstract, page ii.

A Comparison Of Three Urban Hydrology Models, Richard F. Astrack

Masters Theses

"Three models, the British Road Research Laboratory Hydrograph Method, the Hydrocomp Simulation Program, and the HEC-1 Flood Hydrograph Package, are applied to the Boneyard Creek basin. Comparing the ability of these models to reproduce the observed peak discharge, time of the peak, and the first runoff volume determines the accuracy of these models"--Abstract, page iii.

A Simplification Of Underwater Acoustic Equations, Morris G. Middleton

Retrospective Theses and Dissertations

This Research Report presents some of the equations of underwater acoustics that relate to the signal excess noise received by a transducer. The basic structural equation is developed, as are defining equations for each term in that equation. An analysis is performed utilizing typical values to ascertain if the elements of the structural equation can be simplified. Results delineate that several terms of that equation can be neglected while maintaining a relative high degree of accuracy.

Kentucky Cbr’S And The Soil Support Value, Tommy C. Hopkins, Robert C. Deen

Kentucky Transportation Center Research Report

Several ASTM and Kentucky CBR tests were performed at different molding moisture contents and compactive energies on the AASHO embankment soil, four representative Kentucky soils, and one soil from Ohio. These data were compared to CBR data previously reported by Shook and Fang. For CBR's ranging from about 4 to 12, a relationship was developed between Kentucky and ASTM CBR's. Within this range, Kentucky and ASTM CBR's are approximately equal. Molding specimens under the static pressure of 2000 pounds per square inch as used in the Kentucky CBR procedure produced specimens with initial dry densities that averaged about 6 percent …

A Survey Of Missouri's Water Resources Involvement, Frank R. Ellis Ii

Masters Theses

"A survey of the procedures for development of water resources in the State of Missouri reveals shortcomings in many areas. Recommended improvements include: 1) revising and publishing a statewide water plan, 2) improving methods of project evaluation and priority establishment, 3) expanding methods of citizen involvement, and 4) reorganization of state agencies and legal authority. The paper examines the history of water resource involvement by the State of Missouri, and current jurisdiction of state agencies, including procedures for review of environmental impact statements"--Abstract, page iv.

Drying Soybeans With Heated Air, Douglas G. Overhults, G. M. White, H. E. Hamilton, I. J. Ross

Biosystems and Agricultural Engineering Faculty Publications

No abstract provided.

Electrochemical Reduction Of Molybdenum(Vi) Compounds In Molten Lithium Chloride-Potassium Chloride Eutectic, Branko N. Popov, H. A. Laitinen

Faculty Publications

Molybdenum (VI) oxide reacts with molten LiCl-KCl eutectic at 450° to form MoO₂CI₂, which probably is present as an anion MoO₂Cl₄⁼, and pyromolybdate, Mo₂O₇⁼. Both of these species are electrochemically reduced to MoO₂, which can be reoxidized to MoO₂Cl₂ by current reversal. A second reduction step, observed whether MoO₃ or Mo₂O₇²⁻ is added to the melt, can be attributed to the reduction of MoO₄⁻⁻, formed as a secondary reaction product in the first …

Penetration In Granite By Jets From Shaped-Charge Liners Of Six Materials, Ronald R. Rollins, George Bromley Clark, H. N. Kalia

Mining Engineering Faculty Research & Creative Works

A new application of theory for three-dimensional collapse of conical liners shows why the two-dimensional analysis may offer a good approximation. Shaped-charge design parameters and rock target properties were investigated to determine their effects on penetration and breakage. Several metals, liner thicknesses, cone angles and standoff ranges for each were investigated. Effective standoff is greater for aluminum than more dense metals. Jets from the 60° monel, brass and steel liners gave the deepest penetration in granite. Jets from copper and brass liners gave equal penetration for 42° apex angles. Liners containing zinc produced small slugs or none at all. The …

Nonequilibrium Structure Of Argon Shock Waves, Harlan F. Nelson

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This theoretical study investigates the influence of (1) the nonequilibrium excited state population in the relaxation region and (2) line radiation in the precursor on shock wave structure by considering strong shock waves propagating at Mach 18 and 24 into a theoretical argon-like gas at a pressure of 1 cm Hg and a temperature of 300°K. The argon atom is modeled as having two bound states plus a continuum, and the calculations include finite atom-atom and electron-atom collisional ionization and excitation rates as well as continuum and line radiation. The electron gas is allowed to be at a different temperature …

On The Method Of Stationary Phase, Byungkyu Park

Electrical and Computer Engineering Faculty Research & Creative Works

The method of stationary phase (MSP), which is an asymptotic method of integration, nevertheless yields general (nonasymptotic) results when applied to certain integrals involving the spherical function. In such cases one may drop the requirement of far-field or high frequency from the results. Copyright © 1973 by The Institute of Electrical and Electronics Engineers. Inc.

An Accurate Digital Instrument To Measure Reactor Period, Ernest W. Scott, Paul D. Stigall

Electrical and Computer Engineering Faculty Research & Creative Works

At Facilities Having a Research-Training Reactor, such as the University of Missouri-Rolla Reactor (UMRR), One Finds It Necessary to Perform a Large Number of Rod Calibrations during the Course of the Year. in Practice Rod Worths Are Determined by Measuring the Reactor Period Created by an Incremental Withdrawal of the Rod under Calibration. Period is Then Related to Reactivity Thru the Use of a Publication Such as the AEC Publication, ID016485. This Frequent Measurement of Period Makes It Desirable to Have a Simple, Automatic and Accurate Method to Make Such Measurements. at UMRR We Have Designed, Constructed and Installed Such …

Engineering And Scientific Manpower- A Scarce Resource For The 1970'S, Merl Baker

Mechanical and Aerospace Engineering Faculty Research & Creative Works

No abstract provided.

Decision-Directed Detector For Overlapping Pcm/Nrz Signals, Cheng Wang, Thomas L. Noack

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A decision-directed (DD) technique for the detection of overlapping PCM/NRZ signals in the presence of white Gaussian noise is investigated. The performance of the DD detector is represented by probability of error PE versus input signal-to-noise ratio (SNR). To examine how much improvement in performance can be achieved with this technique, PE's with and without DD feedback are evaluated in parallel. Further, analytical results are compared with those found by Monte Carlo simulations. The results are shown in good agreement. © 1973, IEEE. All rights reserved.