Digital Commons Network^™

An Environmental And Energy Information System, G. U. Ulrikson, M. P. Guthrie, G. M. Caton, H. F. Mcduffie

UMR-MEC Conference on Energy / UMR-DNR Conference on Energy

The Environmental Information System Office (EISO) at Oak Ridge National Laboratory (ORNL) provides information support for researchers and administrators involved with energy and environmental policy and progress. Multiple EISO activities for various governmental agencies have resulted in establishment of compatible data bases concerned with energy and environmental information, methods for effectively developing these, development and computer display of numerical data summaries, and reports evaluating published information. Direction is provided by continuing dialogue between users and information system staff.

Diffusion Coefficients Of N-Heptane And N-Decane In N-Alkanes And N-Alcohols At Several Temperatures, James W. Moore, Robert M. Wellek

Chemical and Biochemical Engineering Faculty Research & Creative Works

The diffusion coefficients of the solutes n-heptane and n-decane were measured in the series of alkane solvents n-hexane through n-decane and in the alcohol solvents n-hexanol and n-heptanol. Mutual and self-diffusivities in most cases were measured at the temperatures of 20°, 25°, 30°, and 40°C. Concentrations of the diffusion species were in the infinitely dilute region. An unsteady state porous frit technique was used with carbon-14 tagged diffusion species. The diffusion coefficients measured were compared with various liquid diffusivity prediction correlations. © 1974, American Chemical Society. All rights reserved.

A Finite Element Analysis Of Unsymmetrically Laminated Rectangular Plates, Stanley F. C. Tseng

Mechanical & Aerospace Engineering Theses & Dissertations

The behavior of laminated plates with coupled extension-bending was investigated using the finite element method. A stiffness matrix for a rectangular element with 20 degrees of freedom was developed using a symbolic mathematics interpreter program. A finite element analysis program was written for the analysis of flat plate. Results i for plate deformations and internal moment distributions are compared with existing exact solutions or experimental data and excellent agreement is obtained.

Loads On Box Culverts Under High Embankments, Harry F. Girdler

Kentucky Transportation Center Research Report

The structural design of culverts requires a reliable estimate of the earth pressures which will come to bear on the structure during and after construction of the embankment. The actual bearing pressure at a given time and under various conditions of differential settlement may be greater or less than the deadload of the fill or embankment over the structure. This report describes the instrumentation and construction of three box culverts designed by the imperfect trench method. A total of 42 Carlson earth pressure cells were installed in conjunction with strain gages and settlement measuring devices, including inverted settlement plates and …

A Microscopy Study Of Lead Sinter, Thomas J. O'Keefe, C. Bennett, E. R. Cole

Materials Science and Engineering Faculty Research & Creative Works

Samples of up-draft sinters produced at three different Missouri lead smelters were studied, to determine the chemical phases present, as a first step toward a more complete understanding of the lead blast furnace operation. The sinters seemed to be basically similar, and all the results reported are from samples from one smelter (Herculaneum smelter, St. Joe Minerals). Analytical tools used included the electron microprobe and scanning electron microscope with a non-dispersive X-ray spectrometer attachment Major phase that were positively identified are metallic lead, lead sulfide and zinc ferrite. The predominant lead phase was tentatively identified as a lead oxide-silicate compound. …

A Study Of Fluid Flow Entering A Sharp-Edged Channel, Rocco Racano

Theses

Experimental investigations were carried out on an newtonian fluid In the two dimensional case through the regions of a sharp-edged entrance and exit. Qualitative and quantitative results were compared to a variation of a two dimensional case of converging flow in a capillary as originally derived by Oka and proposed by Philippoff. In addition velocity profiles were taken in the entrance region. Furthermore, the effect of temperature gradients in the slit region with their resulting optical effects were considered. The methods used to obtain these goals were photoelasticity and streak photography.

Results were four, to be consistent with the theory …

Ua66/1/2 Scrapbook, Wku Ogden College Of Science & Engineering

WKU Administration Documents

Scrapbook of clippings, press releases, photographs and other items related to the history of Ogden College of Science & Technology from 1961 to 1974.

Review Paper: Evaluation Of Techniques For Algae Removal From Wastewater Stabilization Ponds, E. Joe Middlebrooks, Donald B. Porcella, Robert A. Gearheart, Gary R. Marshall, James H. Reynolds, William J. Grenney

Reports

Introduction: Approximately 90 percent of the wastewater lagoons in the United States are located in small communities of 5,000 people or less. These communities, many with an average daily wastewater flow of only 175,000 - 200,000 gallons, do not have the resources to keep man at the lagoon sites throughout the day (38). A high degree of technical knowhow is usually lacking in these communities. Often only periodic inspection or maintenance is carried out by the general municipal work force. Therefore, the development of a relatively inexpensive method that does not require sophisticated and constant operation or extensive maintenance is …

A High Speed Pulse Code Laser Diode Modulator, John Lawrence Mcdonough

Retrospective Theses and Dissertations

This research report reviews the basics of pulse code modulation (PCM) techniques and includes a special encoder design for a system which uses a laser diode output for the transmitted pulse. The text discusses PCM and its features, PCM formats, synchronization, and various accepted PCM codes. The encode circuit design is complete with a description of the circuit, circuit components, and operation. Included are the necessary diagrams, figures, specifications, and parts list. The transmitted output of the design circuit has a repetition rate of one megabit per second.

Amine Flotation Of Feldspar From Magnetite Concentrate., Gary William Hudiburgh Jr.

Masters Theses

"The gangue in some magnetite ore bodies contains feldspar; the alkali content of the feldspar reduces the usefulness of these iron ores. One method of decreasing the feldspar content in magnetite concentrate is froth flotation.

The amine flotation of feldspar from magnetite concentrate was investigated using zeta potential measurements, Hallimond tube flotation tests and laboratory-scale flotation tests. The zeta potential of various feldspars (microcline, albite, anorthite, oligoclase and anorthoclase) were determined as a function of pH; the point of zero charge ranged from pH 1.4 to 2.5. Hallimond tube flotation tests using two amine reagents were conducted on the feldspars. …

Effect Of Sweeping Sinusoidal Excitation On Nonlinear Dynamic Systems., Md. Mosharraf Hossain

Masters Theses

"The response of viscous damped, cubic spring systems to excitations having exponentially varying frequency cannot be written in a closed form. This report summarizes a numerical investigation of hardening and softening cubic systems influenced by these excitations and provides information concerning the effects of varying viscous damping, system nonlinearity, and excitation sweep rate on system behavior near resonance. Results are reported in terms of maximum response attained during sweeping and the frequency at which maximum response occurs.

It has been found that if hardening cubic systems are subjected to sweeping excitations wherein the frequency sweeps down through resonance, the maximum …

Esca Characterization Of Flotation Products From A Lead-Zinc-Copper Concentrator On The New Lead Belt Of Southeast Missouri., Kevin Leroy Purdy

Masters Theses

"Electron spectroscopy for chemical analysis (ESCA) was used to determine the surface characteristics of products from an operating Pb-Zn-Cu concentrator on the New Lead Belt of southeast Missouri and pure galena and sphalerite samples treated with flotation reagents in concentrations similar to those used in the mills. The emphasis was on the action of surface modifiers such as Na₂Cr₂O7, starch, SO₂, CuSO₄ and NaCN in sphalerite flotation and in the galena-chalcopyrite separation. The objective of the investigation was to monitor the relative oxidation states of the mineral and reagent constituents and correlate these …

Post Irradiation Changes Of The Elastic Modulus Of Aluminum, Dale A. Powers

Masters Theses

"Aluminum samples of 99.99% and 99.999% purity were irradiated to neutron fluences of 3·8·10¹⁸ nvt and 1.4·10¹⁹ nvt (E greater than 0.1 Mev) at one-third of the melting temperature. The change in Young's modulus of elasticity after isothermal annealing in the temperature range of 110⁰C to 130⁰C was measured. After 2.5 hours of annealing, the modulus reached a steady state value which was decreased by 0.25% ± 0.17% from the unannealed value. Electron microscopy suggests the hardening mechanisms were dispersion hardening by silicon precipitates and void hardening"--Abstract, page ii.

Combined Forced And Free Convection On A Vertical Cylinder And Flat Plate, Aleksandros Mucoglu

Masters Theses

"In the study of fluid flow over heated surfaces, it is customary to neglect the effects of buoyancy force when the flow is horizontal. However, such a practice is not justified when the forced flow is along an inclined or a vertical surface, because under these conditions the buoyancy force modifies considerably the flow field and hence the heat transfer rate from the surface. Such a flow is termed combined forced and free convective flow.

The present study is concerned with the effects of buoyancy force on forced convection along an isothermal vertical cylinder and a flat plate. This type …

Local Buckling Of Cold-Formed Steel Structural Members Having Initially Curved Compression Elements, William M. Mckinney

Masters Theses

"A comprehensive investigation of the effect of initial deviation from flatness on buckling stress and post-buckling strength of compression elements in structural plate members is presented. The study of stiffened and unstiffened elements expands the scope of elastic stability for initially curved plates. Finite element techniques were utilized for the study of unstiffened elements"--Abstract, page ii.

A Systems Approach To Evaluating The Effectiveness Of Training Programs, Jesse Michael Haverstick

Masters Theses

"The evaluation of the effectiveness of training programs has long been recognized as a necessity in determining the allocation of investment. However, much of industry, today, still does not use an easily administered, systematic, and reliable method for determining training program effectiveness for their salaried (managerial) personnel. It is easily seen that determining training program effectiveness is not a one-shot, one-time event, but a continual process, whose aim, ultimately, is increased productivity. For the effectiveness of a training program to be adequately monitored, these four areas should be measured: (1) trainee attitude, (2) learning, (3) behavior change, and (4) productivity …

Synthesis Of Fused Silica By Flame Hydrolysis, James Edward Rourke

Masters Theses

"Apparatus to synthesize and dope high purity, optical quality fused silica by flame hydrolysis was constructed. Fused silica samples containing 0, <35, 35 and 90 ppm niobium were synthesized and characterized by the following properties: purity, refractive index, radiation damage resistance, and transmission spectra. The properties of the undoped sample were shown to be comparable to those of available commercial fused silica. Deviations in the properties of the doped samples from those of the undoped samples were explained in terms of the niobium content"--Abstract, page ii.

A Finite Element Method For Three-Dimensional Analysis Of Metal Forming, Nguyen Don Phu

Doctoral Dissertations

"The importance of metal forming by extrusion was reviewed. A Finite Element Approach was developed to analyze extrusion processes. A brick type linear element and the Upper Bound theorem were used to analyze the extrusion of a cylindrical billet into a square cross-section prism. A minimization technique for a non-linear functional with linear constraints was developed. Different types of boundary conditions were also formulated. A frictionless extrusion was simulated using the computer program developed. Velocity profiles at different sections of the deforming solid were obtained and an average extrusion pressure was predicted for a given area reduction ratio.

Extrusions from …

Measurements Of Condensation Coefficient Exhibited By Water Drops Grown On Rural Cloud Nuclei, Abbas M. Sinnarwalla

Doctoral Dissertations

"Values of condensation coefficient, ß, were experimentally determined for water drops grown on cloud nuclei in atmospheric air samples. The measured quantities were supersaturation, final drop size (6 to 7.5 µm radius), and time to grow from near dry radius to final radius. The drops were grown in a vertical-flow thermal diffusion chamber, at supersaturations near 0.5 and 1.0%. The final drop sizes were large enough so that ß did not depend upon the size of the nucleus producing a given drop. The average value of ß was 0.025 with a standard deviation of about 0.01"--Abstract, page 2.

Statistical Modelling Of Computer Systems: A Survey, Amrit L. Goel, Anand M. Joglekar

Electrical Engineering and Computer Science - All Scholarship

This paper briefly surveys the data dependent statistical methods useful for computer systems modelling. The techniques are classified according to their applicability toward comparison, tuning and design of computer systems. A review of papers dealing with statistical modelling of computer systems is presented and a comprehensive bibliography is included to provide a useful source of reference toward the present and potential applications of statistical methods for computer system modelling.

Film Formation On Anodically Polarized Lead, H. Vaidyanathan, Ram A. Narasagoudar, Thomas J. O'Keefe, William Joseph James, James W. Johnson

Materials Science and Engineering Faculty Research & Creative Works

No abstract provided.

A Multiple-Plan Evaluation Model For Small Ungauged Watersheds, James R. Dexter

Masters Theses

A computer solution model is proposed for simulation of the effect of alternative measures for flood damage reduction. The goal of the model is to optimize the value of an objective function which will maximize the amount of net benefits returned by the project. The evaluation includes unit hydrograph synthesis, direct runoff construction, computation of average annual damages, and optimization of an objective function. A test application of the model is made on a small community affected by floods from a small ungauged stream"--Abstract, page iii.

A Comparative Analysis Of The Capabilities Of Three Stereo Radar Techniques When Operating In The Presence Of System Errors, George L. Bair

Masters Theses

"Three stereo radar techniques for producing stereo images from which topographic data and maps may be obtained are described and their performance in the presence of system errors is determined. The techniques are: an improved single flight technique which uses a combination of two antenna beam characteristics which permits terrain illumination from nearly the same aircraft position, a previously proposed single flight technique which uses two horizontal linear arrays generating vertical fan beams at different azimuth angles, and an existing two flight technique which uses a horizontal array generating a side-looking fan beam.

Error analyses are performed to determine the …

A Discrete Approach To Surface Interpolation, Jerry Lee Albert Sandvos

Masters Theses

"An equidistant spacing of two dimensional data points is a requirement of most automated analysis routines. In this thesis, a method of generating such equispaced data from randomly spaced data is developed and implemented by a set of computer routines. The method represents the study area as a two dimensional spatial array, in which each array cell represents the data value of a subarea of the study area. A routine sorts and places the data in the array. Missing values in the array are interpolated from nearest neighbors. Filtering is used to smooth errors and a contouring routine is used …

A Comparison Of N-Path And Digital Filters For Band Pass Applications, Stephen Cooperman

Retrospective Theses and Dissertations

The classic problem of achieving high Q, band pass, inductorless filters has been traditionally attacked by applying active RC networks. This approach suffers from the faults of poor economy, lack of stability of performance with time and temperature, and high network performance sensitivity to component changes. The problem is reviewed from the aspect of applying techniques other than operational amplifier RC filters. The techniques presented are those of N-Path (switching) and Digital Filters. The underlying theory of both methods is explored and a design example for each of the techniques is presented. These designs are then compared on the basis …

Performance Comparison Of Techniques For Obtaining Stereo Radar Images, George L. Bair, Gordon E. Carlson

Electrical and Computer Engineering Faculty Research & Creative Works

The performance of three stereo radar techniques is compared with respect to both theoretical performance and performance in the presence of errors. The three techniques are: an improved single flight technique, a previously proposed single flight technique, and a two flight technique. Theoretical data for comparison of image parameters affecting performance have been generated with computer simulations of the imaging geometries for the techniques. The comparison shows that the improved technique will have images with greater similarity resulting in improved stereo viewability and measurability. Computer simulations have also been used to generate sensitivities of computed terrain point coordinates to system …

An Asynchronous Circuit Design Language (Acdl), Gregory M. Bednar, James H. Tracey

Electrical and Computer Engineering Faculty Research & Creative Works

This correspondence describes a special purpose Asynchronous Circuit Design Language (ACDL) for specifying the terminal behavior of asynchronous sequential circuits. The language is a valuable tool for formalizing and documenting asynchronous designs, as well as providing a user interface to a completely automated synthesis system. The language includes many special features which permit quick and precise specification of terminal behavior and is best suited for problems that are currently being described informally by word statements. Copyright © 1974 by The Institute of Electrical and Electronics Engineers, Inc.

Transient Thermal Stresses In A Sphere By Local Heating, J. B. Cheung, T. S. Chen, K. Thirumalai

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The problem of transient thermal stresses in a solid, elastic, homogeneous, and isotropic sphere is solved for uniform and nonuniform, local surface heating. The temperature solutions are obtained by using separation of variables and integral transformation. The corresponding thermal stresses are derived by superposing a particular displacement potential function on Boussinesq solutions. Numerical solutions for two particular cases of localized heating of a typical brittle spherical solid have been obtained and presented. The results indicate a tensile stress concentration in the interior of the solid below the heated zone. © 1974 by ASME.

Vibration Characteristics Of Free Thin Cylindrical Shells, Floyd M. Cunningham, D. E. Leanhardt

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper considers the flexural vibrations of free thin circular cylinders. A frequency equation is derived using free-free characteristic beam functions to represent the variation of mid-surface shell displacement components, u, v and w, with respect to the axial direction. Timoshenko strain-displacement relations for thin cylinders are used to determine elastic vibratory strain energy. Energy methods are applied to obtain the frequency equation and associated amplitude ratios for each of its roots. This energy solution is checked experimentally using a vibration exciter and numerically using the SABOR IV finite element program. With minor modification, the frequency equation conforms to the …

Osha's Impact On Industry, Paul Christ Noller

Retrospective Theses and Dissertations

On December 29, 1970, the President signed into law the Williams-Steiger Occupational Safety and Health Act (OSHA) of 1970, which became effective April 28, 1971. The purpose of this act is to assure safe and healthful working conditions for the nation's wage earners. The law provides that each employer has the basic duty to furnish his employees a place of employment which is safe from recognized hazards that cause death or serious physical harm. The implementation of the OSHA Act has been the most extensive intervention into the day-to-day operation of American Industry in history. Originally, employers expressed doubt that …