Digital Commons Network^™

Mechanical Treatments Of A Missouri Fire Clay And Their Effect On Shrinkage, Porosity And Strength, Allen Richard Maune

Bachelors Theses

"It is known that various kinds of mechanical treatments of clay before and during the forming operation will produce variant properties in the dry and burned states of the clay. The investigation here deals with several types of mechanical treatment before the forming operation; all forming being done by moulding by hand"--Introduction, Purpose of the Investigation, page 1.

A Traffic Survey Of The City Of Sioux Falls, South Dakota, George Everett Thompson

Electronic Theses and Dissertations

How to control the traffic on the streets of our cities is becoming one of the most important problems of the present day. an urban community depends for its existence upon the transportation facilities both internal and external. The external transportation is necessary for a city's growth because food supplies and raw materials must be brought into the city and the commodities which are produced in the cities must be distributed to other places.

Test 182: Cletrac Model 80-60, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 176: Oliver Hart-Parr Row Crop, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 180: Oliver Hart-Parr 18-28, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 175: Twin City Model Kt 11-20, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 179: Monarch Model 50, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 177: Massey-Harris (General Purpose), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Advertising Brochure: Illinois Heavy Duty Tractor, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 183: Oliver 90, Nebraska Tractor Test Lab

Nebraska Tractor Tests

No abstract provided.

Test 173: Fordson Model F (Kerosene), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 174: Fordson Model F (Gasoline), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 183: Oliver Hart-Parr ( 3-5 Plow ), Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 184: Eagle Model 6a, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

The Effect Of Occluded Air In Dry-Press Mixes, William Raymond Powell

Bachelors Theses

"The effect of occluded air in clay mixes has recently become a subject of considerable importance especially since some of the defects occuring sic in dry-press ware, such as cracks and soft or granulated centers, have been either partially or wholly attributed to occluded air. According to this theory, the defects are due to the entrapping of air among the clay grains before compression, which, when the pressure is released, has a tendency to expand and cause a rupture in the bond. Also granulated centers have been explained by the fact that the entrapped air may act as a cushion, …

The Determination Of The Alumina Content In Diaspore And High Alumina Clays, W. D. Keller

Bachelors Theses

"The determination of the alumina in diaspore and kindred high alumina clays has been a problem which has attracted the interest of ceramists and chemists ever since a sample of Missouri diaspore was first sent for analysis to the laboratories of the Missouri School of Mines and Metallurgy in 1917...It is the writer's intention to review in this paper the various published methods for the determination of alumina in high alumina clays and to present a new indirect one that after some months' use in industrial practice, fulfills, in some measure at least, the need outlined above"--Introduction, page 1 -2.

The Transmission Of Pressure In The Dry Pressing Of Typical Building Brick And Fire Brick Mixes As Affected By The Degree Of Pressure, Physical Character Of Mix Ingredient, And The Moisture Content Of The Mix, George Ava Page

Bachelors Theses

"In the manufacture of dry press brick, the final grinding and tempering of the clay is usually done in a dry pan. The next operation is forming the ware by means of applying pressure, either mechanical or hydraulic. The actual pressure that a brick is subjected to in a mechanical press has always been a question...The purpose of this investigation was to determine what effect would be imparted to the brick by varying the forming pressure and keeping the water content constant, and what effect would be imparted by varying the water content and keeping the forming pressure constant, on …

The Solubilities Of Alkali Chlorides And Sulfates In Anhydrous Alcohols, Emmet Rudolph Kirn

Masters Theses

"A search of the literature for data on the solubilities of inorganic salts in various anhydrous alcohols will show that comparatively little work has been recorded. Most of the work has been done on salts in aqueous normal alcohols and practically all of this data concerns only methyl and ethyl alcohols. This information shows a wide divergence in results with different workers. Perhaps these differences in data may be attributed to an error in that the alcohols may not have been absolutely anhydrous, for even small traces of water greatly affect the solubility of the salts. Again, the methods of …

A Study Of The Electrolytic Determination Of Lead, Philip Hall Delano

Masters Theses

"The electrolytic determination of lead is one of the most used methods, particularly for control work and where large numbers of analyses have to be run each day. The method is adopted because of its simplicity and because of the small amount of the chemist's time required. It is particularly suited for the determination of small amounts of lead. However, it has been noted that deviations from certain conditions produce results which vary widely from the actual amount of lead present, though results which check with each other may be obtained. Certain elements interfere with the determination and must be …

Laboratory Concentration Of The Missouri Iron Ores Of Iron Mountain And Pilot Knob, Strathmore Ridley Barnott Cooke

Masters Theses

"The purpose of this investigation was to ascertain whether the more important iron ores of Missouri would be amenable to beneficiation to produce high grade concentrates. In the southeastern section of Missouri are found many small deposits of high grade iron ores, and a few large deposits of comparatively low grade ore. The former consist chiefly of red and brown hematite and limonite ores that are in no need of beneficiation. the low grade iron orebodies are relatively large in extent, and, if they could be beneficiated successully [sic] and economically would be of value. Accordingly, the major portion of …

Salts In Tri-State Mill Waters: Their Ill-Effect On The Flotation Of Zinc And Their Removal, Warren Lincoln Howes

Masters Theses

"The application of the flotation process has become one of the greatest innovations in modern ore dressing. In a comparatively short span of years it has grown to be one of the most powerful tools of the ore dressing engineer. Flotation is particularly adapted for the recovery of finely ground mineral and has thus enabled the miner to open up enormous deposits of low grade, disseminated ores for profitable treatment. In conjunction with other methods, the process has raised the recovery in practically every ore dressing plant by the treatment of slimes which otherwise would go to waste, carrying valuable …

A Power Study Of A Laboratory Ball Mill, Frederick Clearman

Masters Theses

"Ball milling practice in the ore dressing industry is largely empirical. Although many investigators have worked on various of its phases, the present operating methods are mostly a matter of cut-and-try, with the result that the industry is not guided by its underlying principles. Consequently, practice varies extensively with regard to nearly all conditions of operations. Even in neighboring concentrators such factors as speed, ball charge, and ore load differ in similar ball mills. Since fine grinding is continually becoming of more importance, and often accounts for thirty per cent of the milling cost, it is very necessary that a …

Producer Gas Practice In The Steel Industry, Horace Wilfred Hodges

Professional Degree Theses

"The sources of energy for the industries are: 1. Water power; 2. coal, lignite, peat and Wood; 3. Natural and Artificial Gas; 4. Oil; 5. The Sun;s Rays; 6. The tides. The latter two sources may be eliminated from immediate practical use, owing to their cost and limited application. Therefore, the burden for many years will rest upon Water power, coal, gas and oil. We may also eliminate water power from the source of energy of the steel industry, due to the Mill's geographical location. Hence, for the near future, the steel industry's soul rests upon the production of coal, …

The Testing Of Steel For Wear By Abrasives, Thomas Evan Eagan

Professional Degree Theses

"The tests herein reported were conducted with the idea of finding a steel which would give improved wear as roll shells in the comminution of ores...Not only must the wear be considered, but also the physical properties. It is desirable to have a steel of such Tensile and impact values that no failure by breakage would occur until the shell was worn very thin. The ideal condition being to wear the shell down to zero thickness, but such cannot be accomplished"--Introduction, page 2.

The Lead And Zinc Deposits In The Sedimentary Rocks Of East Tennessee And Southwest Virginia, Joseph Hugh Reid

Professional Degree Theses

"In its geographic and geologic relations this area forms a part of the Appalachian province, which extends from the Atlantic Coastal plain on the East to the Mississippi lowlands on the West and from Central Alabama to Southern New York. All parts of the region thus defined have a common history recorded in its rocks, its geologic structure and its topographic features"--Geography, page 1.

A Study Of The Iodine Content Of Missouri Vegetables And Soils, Charles Jackson Potter

Masters Theses

"Investigations have shown that the iodine content of vegetables, water, and soils has a direct relationship to the goiter incidence of a given region. A few countries, notably New Zealand and Switzerland have made a rather complete survey. In the United States, South Carolina has made the most progress in this direction.

At the present time there are no available records of vegetable and soil analysis for iodine in Missouri. Hunze determined the amount of iodine in waters in Missouri. The connection of his results with the author's results will be seen later.

The present investigation was carried out at …

The North Side Sewage Treatment Works Of The Chicago Sanitary District, Floyd Allen Gerard

Professional Degree Theses

"My aim in writing this thesis has been to give a clear and concise picture of the Plant, its construction, operating experiences, results and the need for sewage treatment. For this reason, I have incorporated much information, which, while not dealing directly with the subject in hand, is closely allied to it and forms a very necessary background. As the Sanitary District considers its actual operating results confidential, I have refrained from including them. Much useful information can be derived from a careful study of the photographs and drawings included"--page ii.

An Engineer's Report Of A Lead And Zinc Mining Property, Ernest Moran

Professional Degree Theses

"Gentlemen: Pursuant to your request, I have analyzed and classified the data relative to the Van Buren Mine of the Lucky Syndicate Mining and Smelting Company and beg to submit the following report. The lease is a lead and zinc mining property consisting of eighty (80) acres more or less..."--Letter to the Wright Mining & Royalty Co Miami, Oklahoma, dated December 9, 1929.

Data For Standard Curve Chord Steel Roof Trusses., William Hewitt Bush

Professional Degree Theses

"In the past the Engineering Department of the structural steel company, by which the writer is employed, has been troubled with having to make a large number of preliminary steel truss designs for the purpose of estimating weights for competitive bids on structural steel building contracts. In order to eliminate this expenditure of time, a study was made of the possibility of making a standard design for curved chord steel roof trusses that would give the desired information by observation"--Truss Design, page 5.

Longface And Longwall Mining Methods Being Tried In Oklahoma Coal Fields, Earl Hollinger Mcalpine

Professional Degree Theses

"Of a number of long wall and long face mining methods in use in Oklahoma mines at this time, I shall outline four in this paper. Two of these methods are in use in mines which are comparatively level. The first of these is in the Kali-Inla mine near Hartshorne. The second is in the Milby-Dow Coal Company mine at Dow. The Mullen Coal Company mine near McAlester and the Hailey-Ola Company mine near Lutie are steep pitching mines"--page 1.