Digital Commons Network^™

Test 219: Massey-Harris "3-4 Plow", Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 218: Caterpiller "Diesel 75", Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 215: Allis-Chalmers Special K, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Test 212: Mccormick-Deering Farmall "F-12", Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Sewage Disposal Improvements At Pontiac, Michigan, Robert William Abbett

Professional Degree Theses

"The existing East Boulevard Sewage Disposal Plant consists of a set of bar screens, a grit chamber, a battery of three Imhoff tanks, eight trickling filter units, of the rotary-distributor type, and three secondary settling tanks. The plant was designed for a population of 52,500 in 1919 by Clarence W. Hubbell, Consulting Engineer. At the present time the plant shows evidence of loading beyond its capacity, the distress of the Imhoff tanks being particularly acute"--Present Sewage Disposal Facilities, page 5.

Some Problems In The Construction Of Artificial And Natural Gas Pipe Lines, Waring Mikell

Professional Degree Theses

"In 900 A.D. the Chinese piped natural gas through bamboo tubes and used it for lighting, and about 1830 artificial gas was carried by three inch wooden pipes in a town in New England. Today there are many thousands of miles of steel pipe bringing gas from Western fields to eastern cities, and many more miles of steel and cast iron pipe for the distribution of artificial and natural gas in the majority of the towns and cities in the United States. This paper will deal with the construction of acetylene welded steel pipe lines, and some of the problems …

The Location, Construction, And Maintenance Of The Rabbit Ears Pass Forest Highway, Julian Greenway Huckins

Professional Degree Theses

"The Bureau Public Roads, Department of Agriculture, has jurisdiction over the construction of, and Federal Aid Funds expended on, the Federal Aid Highways thruout the United States, Alaska, and Hawaii. It may not be generally known that the Bureau is also in direct charge of the location, construction, and maintenance of all National Forest Highways under the Department of Agriculture and all National Park Highways under the Department of the Interior. District No. 3 of the Bureau Public Roads, with headquarters in Denver, is composed of the States of Wyoming, Colorado, New Mexico, and the Black Hills Region of South …

A Comparative Study Of The American Society For Testing Materials Spall Test And The Federal Specifications Spall Test, Justus Jordan Beinlich

Bachelors Theses

"Commercial brands of fireclay brick will be tested with both the American Society for Testing Materials and the Federal Specifications Spall Tests in order to determine whether the two tests are consistent in the indication of resistance to spalling. It is suggested that the properties of a refractory affecting thermal spalling are reversible thermal expansion, elasticity, heat transfer, plastic flow, and strength. It is hoped that it will be possible to explain the discrepancies that may arise in the results of this work in terms of the above physical properties or else find a reasonable agreement between the two tests"--Introduction, …

The Effect Of Reheating Certain Fire Brick On Pyrometric Cone Equivalents, Francis J. Louney

Bachelors Theses

"In a recent survey of the refractories field, especially with respect to the softening point of fire brick, it was suggested to the author that the possibility of reheating certain fire brick, according to the specifications given by the American Society for Testing Materials, might produce a difference in pyrometric cone equivalent from that of the original or unreheated sample. At present, there is considerable lack of knowledge regarding the problem, as evidenced by the utter lack of literature on the softening point resulting from the reheating of fire brick"--Introduction, leaf 1.

The Replacement Of Calcium Carbonate With Calcium Chloride And Calcium Fluoride In A Whiteware Body, Charles Richard Rosenbaum

Bachelors Theses

"In the steel industry it is a common metallurgical practice to add fluospar sic (CaF₂), to a slag to render it more fluid. Ladoo states that the fluospar sic , thus added, forms eutechtics with the silica, alumina, calcium and barium sulfates, rendering them more fusible. The fluospar sic does not decompose, but forms solutions or eutechtics with other substances in the slag. He further states that calcium chloride (CaCl₂) has been used for this purpose but is apparently not as active, necessitating larger quantities per charge. It is also probably more expensive. Calcium carbonate (CaCO₃) is commonly used as …

Aventurine Glazes, Felix Fraulini

Bachelors Theses

"The object of this study was to notice the effect produced upon the crystalline growth in the glaze by the variation of B₂O₃, Fe₂O₃, and SiO₂, and to notice the effect of cooling upon the crystalline growth in the glaze"--Scope of Investigation, leaf 3.

Factors Affecting The Performance Of Kerosene Cook Stoves, Edna B. Snyder

Nebraska Agricultural Experiment Station: Historical Research Bulletins

The purpose of this investigation was to learn the effect of constructional details of the burner and the framework on the performance of kerosene stoves. Six stoves were used, four of the long-chimney type and two of the short-chimney type. Of the long-chimney burners, three were from the same manufacturer; the fourth was similar in appearance, but differed in performance. Of the short chimneys one burner used a wick, the other a lighting ring. The effect of: (1) draft variations and constructional details and (2) the framework on the heating time and thermal efficiency of stoves was studied.

Problems Encountered In The Development Of An Airport, A. H. Armstrong

Theses

The progress of a nation and. its transportation facilities have always advanced hand in hand.

Just as it has always beerthe Civil Engineer's problem to develop facilities for other means of transportation, such as roads, harbors, and. railroad terminals, so is it his problem today to build airports.

In presenting the problems encountered in the development of an airport, the writer has considered the airport's place in city and regional planning, as well as the part it plays in air transportation.

An expression of thanks is given to Mr. Wm. S. La Londe, Jr., professor in Civil Engineering at the …

Piles And Pile Driving, Robert W. Van Houten

Theses

This thesis on the subject of "Piles and Pile Driving" has been written to fulfill one of the requirements for the granting of the degree of Civil Engineer by the Newark College of Engineering. The material contained in this thesis has been gleaned from many books, catalogs, magazines and from the author's own experience. Much still needs to be accomplished in the field of research but this can be done only through the cooperation of the companies who are engaged in this work and have the equipment necessary for making many tests under actual field conditions.

The author wishes to …

The Recovery Of Copper In Sulphide Ores By Roasting, Leaching, And Electrolysis, Jack S. Greenough

Bachelors Theses and Reports, 1928 - 1970

Sulphide ores of copper are insoluble in dilute sulphuric acid leaching solutions, but a very high extraction can be obtained if the copper ore is in the oxidized condition. The problem is to convert the sulphide into the oxide form. This can be done by giving the sulphide ore an oxidizing-sulphatizing roast. Copper sulphate is soluble in water, so acid will be saved in the leaching process if copper sulphate is present. The iron in the copper sulphide ores is present as pyrite, or in combinations as bornite, or chalcopyrite.

The Effect Of The Fe2: Fe3 Ratio Upon The Current Efficiency In The Electrolysis Of A Copper Sulfate Solution Containing Iron Sulfate, Roy Macfarland

Bachelors Theses and Reports, 1928 - 1970

In the treatment of copper ores by hydro-electro-metallurgical methods, not only is copper deposited, but other metals are also dissolved. In practice it has been found* that iron, under certain conditions, causes the copper to deposit on the cathode as a nonadherent precipitate and also that the iron in solution causes a great decrease in current efficiency, es­pecially when the electrolysis is conducted by operating with a higher current density at the cathode than at the anode.

The present investigation deals with the effects of the two valences of iron on the current efficiency and endeavors to determine whether or …

Some Notes On The Composition Of "Copper Pitch", Richard R. Matthew

Bachelors Theses and Reports, 1928 - 1970

A supply of so-called "copper pitch" ore was received by the Montana Bureau of Mines and Geology in response to a request by them from a resident of Kalispell, who had previously sent a specimen to the Bureau for a mineralogical analysis.

Since this material was little known and had apparently received but little study under a reflec­ting microscope, it was thought that such a study might throw some light on the mineralogical and chemical composition of the material.

The Aplitic Body Bordering Roosevelt Drive South Of Butte, Montana, Edward B. Trueworthy Jr.

Bachelors Theses and Reports, 1928 - 1970

The area studied consists of a large body of aplite situated 12 miles south of Butte. It extends eastward almost to the Butte-Pipestone road, southward to Lime Kiln Hill and westward a distance of 3000 feet.

The petrographic work was supplemented by a map of the area. Special attention was given to those frequent "Limonite Specks" found in the aplite.

Joint Planes In The Rhyolites Of The Butte District, Montana, John B. Hopkins

Bachelors Theses and Reports, 1928 - 1970

The problem herein discussed deals with the pointing planes found in the area of rhyolite located in the northwestern portion of the Butte District. The question to be determined was whether or not the pointing planes in the rhyolites could be class­ified with the Butte Ore fissure systems.

A Bentonite Deposit Near Warm Springs, Montana, R. H. Larson

Bachelors Theses and Reports, 1928 - 1970

This report deals with a bentonite deposit recently developed, approximately seven miles northeast of Warm Springs, Montana. A group of claims have been staked on the deposit and are owned by the Lincoln Mining Company of Anaconda, Montana. The company also has several claims prospected for silver one mile from its present site of operations, but the silver prospects have failed to produce. The bentonite deposit was discovered incidentally during the course of other development work, and at present two adits have been driven into the side of a mountain, each crosscutting a vein-like mass of bentonite varying from two …

Asphalt Emulsions, Albert Joseph Krause

Bachelors’ Theses

During the past decade the improvement of our primary or trunk line highways and the streets of our business as well as the principal residence streets of our towns and cities has gone forward at a rapid pace. For the most part these improvements have consisted of high-type, costly pavements which have in some cases placed excessive burdens on our public treasuries and the tax-payers who are assessed for them.

The Rate Of Precipitation Of Copper Aluminide In The Silver Rich Silver-Copper-Aluminum Alloys, Thomas Finley Mcbride

Bachelors Theses and Reports, 1928 - 1970

In order to determine the best annealing temperature at which to age-harden the alloys, hardness tests on speci­men annealed for different lengths of time at different temperatures were made.

The Effect Of Hydrogen Overvoltage On The Electrolytic Deposition Of Zinc, John M. Munzenrider, Kenneth O. Sweeney

Bachelors Theses and Reports, 1928 - 1970

In the deposition of metallic zinc by electro­lysis from neutral or acid solution, little difficulty is experienced provided certain impurities are absent from the electrolyte. The use of the process has long been considered as a potential source, patents on the process having been issued as early as 1880. However, the early experimenters failed to realize the importance of impurities in the electrolyte, and for this reason, the process suffered several severe setbacks when commercial plants were built.

The Electrolytic Deposition Of Chromium Upon Aluminum, E. Fults, L. D. Voerge

Bachelors Theses and Reports, 1928 - 1970

The purpose or this investigation is primarily to determine the best conditions for plating chromium on aluminum. The work was carried out with the hope of obtaining coherent deposits, and of determin­ing the conditions under which such deposits may be duplicated.

Fundamentals Of Bridge Design, Albert C. Kalmbach

Bachelors’ Theses

Man's earliest communication followed: water routes. Our prehistoric ancestors, evidence shows, fashioned boats and rafts which enabled them to travel along the rivers, and later to sail the seas. Following history through the years we will find man always developing theater routes for transportation before other methods. The early colonies in our America were along the coastal rivers; the Ohio and Mississippi river valleys were first settled in the interior.

Mccormick-Deering Farmall Model F-20 Instruction Book, Tractor Museum

Farmall, McCormick Deering and International Harvester Co

This eighty-six (86) page instruction booklet contains information related to the McCormick-Deering Farmall F-20 tractor. Included inside is information concerning all aspects of tractor operation, maintenence and repair including engine, transmission, starter, water system and other diagrams. (This is Tractor Test #221)

The Effect Of Grain Sizing On The Strength And Porosity Of Refractory Grog Bodies, Robert Stafford Green

Bachelors Theses

"The object of this work was to determine the effect of grain sizing on the strength and porosity of grog bodies. The investigation was carried out by the general method of making up bars of varying grain composition and testing them for strength and porosity"--page 1.

Test 205: Caterpiller Model 20, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …

Stress Investigation And Design Methods For Composite Beams Consisting Of Concrete Slabs On Steel I-Beams, Hjalmer T. Person

Electronic Theses and Dissertations

The term, reinforced concrete, as generally used, is applied to that type of construction in which steel rods are imbedded in concrete members. In these members the steel and concrete are considered to act as a unit and both are assumed to be effective in developing the resisting moment of the beam.

Test 202: Cletrac Model 15, Nebraska Tractor Test Lab

Nebraska Tractor Tests

All tractors tested at the Nebraska Tractor Test Laboratory were certified by their manufacturers as being stock model machines, conforming to specifications filed with the application for test. No special or high-test fuels were used except as recommended by the manufacturer as necessary.

All results within the official tractor test report were actually attained in tests and are without correction or allowances for friction, temperature, altitude, etc. The results were initially accomplished with the tractor in charge of skilled operators employed by the University.

Unless otherwise noted, each tractor was apparently in good condition at the end of the testing …