Digital Commons Network^™

Workshops On Legal Problems Of Atomic Energy, University Of Michigan Law School

Summer Institute on International and Comparative Law

In 1952 the University of Michigan Law School, as a part of its summer session program, offered an Institute entitled "Industrial and Legal Problems of Atomic Energy. " The 1946 Atomic Energy Act, creating a virtually complete government monopoly, was then in effect, and private development of peaceful uses of atomic energy was for the most part merely a gleam in the eyes of a few forward-looking individuals. The 1952 Institute was devoted to the task of obtaining a preview of atomic affairs to come. The speakers on the program could do no more than look forward and speculate on …

Calcination Of Missouri Flint, Burley And Diaspore Clays In A Rotary Kiln, Richard Addison Parker

Professional Degree Theses

"This thesis will concern itself primarily with the preparation, handling and calcination of Missouri fire clays that are subsequently used as "grog" for manufacture of fire brick. This "grog", i.e., calcined flint, burley or diaspore clay is then mixed with ether clays having plastic qualities to form desired shapes of high temperature refractories, and burned as a final product in tunnel kilns and as required, in “beehive” or periodic kilns. The actual manufacture of fire brick will not be dealt with since it is, in itself, a highly specialized industry. We are immediately concerned with the proper preparation of calcined …

Field Manual Fm 55-8, Transportation Intelligence, October 1956, Robert Bolin , Depositor

United States Department of Defense Military Intelligence

This is a manual describing the transportation intelligence activities of the Army in the mid-1950s. A more accurate title would be “Transportation Corps Intelligence” since the Army technical services were responsible for intelligence related to their field of expertise in the 1950s.

The modern US Army vision of the technical intelligence developed during World War II. Shortly before World War II, Army Technical Services had been instructed to set up intelligence sections in the offices of their chiefs. The technical services were bureaus which supplied weapons, equipment, and services to the Army, managed the careers of officers in a particular …

Correlation Of Weir Crest Depth, Froude Number, H/P Ratio, Weir Thickness, Paul Harrawood

Masters Theses

"1. The Froude number criterion for weir flow was shown to be sound and accurate by experimental verification of the theoretical correlation of Froude number and critical depth. It was proved that sub-critical, critical and super-critical flows are correctly identified by the Froude number.

2. In order to accurately determine the Froude number, the actual flow section at the weir crest must be known. Because of end contractions, it does not have the same dimensions as the weir opening. For the Cipoletti weir, it is the product of the length of the crest and the crest depth, i.e., A= by. …

The Strength Of Bituminous Mixtures And Their Behavior Under Repeated Loads, Leonard E. Wood, William Harner Goetz

JTRP Technical Reports

No abstract provided.

The Use Of Urban Characteristics In Estimating Internal Travel Patterns, John Wallace Barr

JTRP Technical Reports

No abstract provided.

Permeability And Absorptivity Of Indiana Limestone Coarse Aggregates, William Lee Dolch

JTRP Technical Reports

No abstract provided.

Annual Report Of The Assistant Director, 1955-1956, Harold L. Michael

JTRP Technical Reports

No abstract provided.

The Application Of Airphotos To Foundation Problems, Bruce Halsey Moore

JTRP Technical Reports

No abstract provided.

Report No. 2 On A Study Of Runoff From Small Drainage Areas And The Opening In Attendant Drainage Structures, Eugene M. West, William H. Sammons

Kentucky Transportation Center Research Report

No abstract provided.

Viscosity Of Non-Newtonian Suspensions, David Edward Gullett, Edward Curtis

Theses

The object of this project ras to obtain a reasonable correlation of the effect of velocity, concentration and particle size on apparent viscosity of non-Newtonian slurries.

Through the use of dimensional and graphical analysis an equation, μ/μ_w=1.02(Ak/GC)^.105, was developed which filled these conditions. The average deviation of the apparent viscosity calculated from this equation compared to the experimental value was 14.4%.

The authors believe that this correlation should be tested under a greater variety of conditions of particle size and particle thermal conductivity and for suspending mediums other than water.

Prospecting For Uranium In Montana, Louis Karhi

Bachelors Theses and Reports, 1928 - 1970

Atomic Energy Commission releases reports of investigations such as RMO, RME, TEI and TEM reports, etc., also releases airborne anomaly maps. Various libraries and A.E.C. offices have these reports on file. The Montana School of Mines library has maps, various reports on the mineral industry, and receives reports prepared by or for the Division of Raw Materials of the A.E.C. Certain other libraries are designated as official U.S. Atomic Energy Commission Depository Libraries and receive copies of all types of unclassified reports.

38th Annual Meeting, 1954. Secretary's Report, Lowell F. Bailey

Journal of the Arkansas Academy of Science

No abstract provided.

Measurement Of Irrigation Water, Eldon M. Stock

Reports

Foreword: Although irrigation has been practiced in Utah for more than one hundred years, irrigation water still is being distributed to farmers with little or not thought about its measurement. A farmer would not think of buying or selling other farm commodities, such as hay, grain, beef cattle, or dairy products, without weighing or accurately measuring them, but at the same time he is often content to accept and pay for the irrigation water received with little or no knowledge as to the actual amount received, or whether or not he is receiving the amount he is entitled to. Measurement …

Observations On The Constitution And Characterization Of Paving Asphalts, James H. Havens, W. F. Daniels

Kentucky Transportation Center Research Report

This paper contains results of analyses with asphalts of various composition and derivation. The objective of the study is to define and correlate constitution and fundamental character of asphalts in a manner significant to their use in highway pavements.

Further confirmation of the existence of three discrete solubility fractions in asphalts was obtained by extraction methods and by paper partition chromatography. Paraffin bodies were revealed by microscopic examination of thin films. Asphaltene fractions showed the presence of particulate material by electron microscopy and also revealed indications of peptized asphaltene bodies. Oils dialyzed from asphalt exhibited u.v. fluorescence similar to components …

Mechanical Vibration Of Vacuum Tubes, Jerry Dale Swearingen

Masters Theses

"Since the beginning of the art of vacuum tube building, vacuum tube engineers have been faced with many mechanical problems as well as electrical problems.

Early mechanical problems were comparatively small because most of the tubes were used in stationary apparatus where little or no vibration was envolved.

As time went on, vacuum tubes were placed in portable equipment and this useage established the need for a tube that was mechanically strong enough to give reliable electrical behavior where the tube was subjected to considerable vibration….

Recently it has been shown that vacuum tubes operating in the instrument cabins of …

The Preparation Of Titanium Tetrachloride From Rutile, Nalin Sen

Masters Theses

"In recent years, considerable interest has been shown in the manufacture of titanium metal because of its outstanding properties both physical and chemical. The commercial process for the preparation of metallic titanium, known as the Kroll process, consists essentially of the reduction of titanium tetrachloride with magnesium in an inert atmosphere to produce titanium metal with magnesium chloride as a by-product.

Since, titanium tetrachloride is the basic compound from which to prepare metallic titanium by the Kroll process, much thought has been given to the preparation of titanium tetrachloride from titanium ores such as rutile or ilmenite.

The present work …

A Study Of The Structure Of Titanium Diffusion Coatings On Iron And Steel, Pao-Jen Chao

Masters Theses

"The Problem of the Thesis: A series of experiments have been made in the Metallurgical. Engineering Department of the Missouri School of Mines and Metallurgy for the investigation of titanium diffusion coatings. The technique of applying the titanium diffusion coatings on iron and steel is still in the experimental stage. A few of the physical properties and chemical compositions of such coatings have been determined, but the structures have not yet been extensively studied. As the correlations of the structures and the desirable properties are valuable for improving the quality or titanium diffusion coatings on iron and steel, an investigation …

Technical Report Writing, Civilian Personnel Division, Office Of The Chief Of Engineers, Department Of The Army, Robert Bolin , Depositor

United States Army Corps of Engineers, Omaha District

This is a brief manual intended primarily to instruct junior engineering personnel working on civil works for the Corps of Engineers in the proper procedures for preparing reports. Some of the contents were papers delivered at a conference on the use of English in Corps of Engineers reports.

The manual is complicated by the Corps of Engineer’s roles as a military organization and as an organization managing civil public works projects and public facilities and by the special problem of having to answer inquiries of members of Congress.

Shortly before this guide was issued, the Engineer School had issued a …

Proposed Revision For Specification For Reflex-Reflective Materials For Highway Signs, James H. Havens

Kentucky Transportation Center Research Report

There are several pertinent factors and considerations that have a direct bearing on the requirements contained in the attached Recommended Special Specification No. 50-R, and it seems appropriate to record them here as reference material either in support of the specification or as information.

The Recovery Of Elemental Phosphorous From Phosphorous-Bearing Sludges, Rajendra Nath Bery

Theses

The theory dealing with the propagation of phosphorus sludges in elemental phosphorus production is generally well known, but it has long been felt that an investigation should be made in order to devise a suitable process whereby it may become possible to effect a separation of phosphorus. It is perhaps unfortunate that while the development of the electric furnace process continued, it sometimes overshadowed the importance of recovering additional amounts of phosphorus by relatively simple and inexpensive means since this is considered vital to the economics of elemental phosphorus production. At the present time, there is no economically feasible process …

The Design And Construction Of An Electrolytic Cell For Aluminum Reduction, Thomas H. Melrose

Bachelors Theses and Reports, 1928 - 1970

The purpose of this investigation was to design and construct a laboratory size electrolytic cell in which to reduce alumina, using the same basic materials that are used in a commercial size cell. The cell was designed to have a capacity of approxi­mately 100 grams of metallic aluminum produced every 8 hours. The cell was constructed so it could be operated continuously.

Application Of The Rotary Principle To Underground Mucking, Walter J. Smit

Bachelors Theses and Reports, 1928 - 1970

Since the beginning of man's utilization of rocks and minerals, he has felt a need for an efficient mover of these materials. Thus, he turned from the sole use of his hands to the development of the shovel, and through the other hand tools-- the hoes, and the fork, and the rake-- he finally came to the manufacture of the heavy, more efficient, large-scale rock movers-- the muckers, and the scrapers, and duckbill loaders.

News Bulletin - May-June, 1954, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A eight page newsletter of the Airline Medical Examiners Association which was published on an irregular basis from 1950-1957. This organization was a predecessor of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Investigation Of Soil Bricks As A Building Material, Ahmet Ilter

Masters Theses

"The need of a cheap construction material for small village farm construction in Turkey makes soil-cement a most desirable material. What is more, as far as the author knows, soil-cement has not found any application in farm house construction in Turkey as yet. So the author, being acquainted with his native country's house construction problem, and seeing the suitable application soil-cement have on such construction, came to the decision that he should investigate this problem thoroughly.

The main objective of the tests run in this investigation will be to find the strength of different samples of soil-cement. The stabilizer used …

A Fundamental Study Of Clay Drying Using Ware Of Large Cross Section, Robert F. Grady Iii

Masters Theses

"The drying of clay has been studied extensively in the past by many investigators, some of whom attempted to relate this information to the structure of clay and thereby develop a more vivid picture, while others studied the mechanism of drying in its own right in order to present a useable theory that would allow improvements in the drying operation.

At present the literature is unable to present a theory of the mechanism of drying that is sufficiently general to cover the observed aspects of clay drying. Many and varied mechanisms are presented, but correlation is seldom completely evident between …

Testing Of Missouri Shales For Light Weight Aggregate Production, Jerry D. Plunkett

Masters Theses

"The original objective of this investigation was to determine by testing those clays, shales, and loesses occuring in Missouri in large deposits (over 15 feet in thickness with little overburden), which would be suitable for the production of light weight aggregate. The second objective was to investigate the mechanism of bloating as related to the physical and chemical properties of the above materials, and by using these relationships cause clays which do not naturally bloat, to bloat using some addition. The use of additives would permit the economical use of material closer to the market in many instances.

After the …

The Design And Construction Of An Electronic D-C Analog Computer, Frederick R. Wagner, William A. Paar

Masters Theses

"To make this project realizable with the funds available and in the time allowed, and to set forth some definite goals, the following objectives were adopted:

1. Design, construct, and place in working order a d-c electronic analog computer capable of solving 4th order linear differential equations with constant coefficients.
2. Include in the design provisions for real time computation, and also fast, repetitive operation.
3. Provide for later expansion of the computer installation.
4. Limit expenditures to $700"--Introduction, page 4.

Effect Of Carbon Content In Steels Upon The Deposition Of Titanium From A Fused Salt Bath, Reinhard Paul Abendroth

Masters Theses

"STATEMENT OF PROBLEM Previous work done at the Missouri School of Mines and Metallurgy on the deposition of titanium upon various metals, especially iron and steel, bas shown that titanium can be deposited upon ingot iron and. low carbon steels with comparitive ease. Difficulty was encountered in attempts to deposit titanium upon steels of higher carbon content and upon cast irons.

For this reason, it was decided to investigate more thoroughly the relationship between the carbon content of various steels and the quality of titanium coatings deposited on these steels. Once this relationship had been established, a suitable theoretical explanation …

Mechanism And Measurement Of First Stage Graphitization In White Cast Iron, David S. Gould

Masters Theses

"The original object of this thesis was to ascertain if coercive force measurements could be used for the determination of degree of malleablization in malleable iron. Since first stage graphitization was involved, it was only natural that an interest in the mechanism of first stage graphitization developed. The investigation which resulted from this interest was done primarily for the edification of the author, however it was subsequently deemed of enough importance to be included in this thesis. For this reason the thesis may appear at times to deviate from the original objective"--Preface, page iii.