Digital Commons Network^™

A Solder-Defined Computer Architecture For Backdoor And Malware Resistance, Marc W. Abel

Browse all Theses and Dissertations

This research is about securing control of those devices we most depend on for integrity and confidentiality. An emerging concern is that complex integrated circuits may be subject to exploitable defects or backdoors, and measures for inspection and audit of these chips are neither supported nor scalable. One approach for providing a “supply chain firewall” may be to forgo such components, and instead to build central processing units (CPUs) and other complex logic from simple, generic parts. This work investigates the capability and speed ceiling when open-source hardware methodologies are fused with maker-scale assembly tools and visible-scale final inspection.

The …

Amino-Polymer For Co2 Capture By Vacuum Swing Adsorption, Sean Billy

Williams Honors College, Honors Research Projects

The applications of sorbent compounds in conjunction with amines and other additives is an innovative method at combating CO2 pollution. An ideal solution would use an amine sorbent to trap the high levels of absorbed CO2 with a low binding energy (less than 45 kJ/mol) and subsequently release them into a stored vessel at ambient temperature with a vacuum swing adsorption system. Attempts at finding a best mixture will be conducted through the usage of a vacuum swing system, utilizing a bed syringe containing the sorbent mix and a vacuum syringe to pull on and subsequently release the CO2 into …

Investigation Of Casting Methods Of Photoelastic Particles To Study The Geomechanics Of Granular Media, Daniel Schullek

Williams Honors College, Honors Research Projects

The research being conducted within this project is to observe force chains in different samples of soil media with varying shapes. The method for observing the force chains is a process called photoelasticity. Photoelasticity uses two polarizing sheets, with the clear media being tested placed between, and light is directed through the sheets to observe how the light is refracted as force is applied to the tested media. Through our research, we are coming up with a method of casting soil particles through the utilization of resin, silicone, and 3D printing. Once the clear particles have been cast, we will …

Emergency Water Treatment Methods Through The Adaptation Of Natural Disaster Building Debris, Benjamin Colston

Williams Honors College, Honors Research Projects

The primary objective of this research was to determine whether concrete slag acquired from building debris in a disaster can be utilized to remove pathogens biochemically through changes in pH or physically through filtration. Direct Plate Enumeration testing was completed for different water samples to compare the general activity of bacterial growth as an indication of pathogenic potential. Throughout each experiment, the pH of different water samples was monitored and consistently indicated that water samples in contact with concrete pieces (concrete water samples) would exhibit a higher pH than samples with no exposure to concrete (control water samples). Compared to …

Amygdala Modeling With Context And Motivation Using Spiking Neural Networks For Robotics Applications, Matthew Aaron Zeglen

Browse all Theses and Dissertations

Cognitive capabilities for robotic applications are furthered by developing an artificial amygdala that mimics biology. The amygdala portion of the brain is commonly understood to control mood and behavior based upon sensory inputs, motivation, and context. This research builds upon prior work in creating artificial intelligence for robotics which focused on mood-generated actions. However, recent amygdala research suggests a void in greater functionality. This work developed a computational model of an amygdala, integrated this model into a robot model, and developed a comprehensive integration of the robot for simulation, and live embodiment. The developed amygdala, instantiated in the Nengo Brain …

Erk3 And Dgkζ Interact To Modulate Cell Motility In Lung Cancer Cells, Amanda Myers

Browse all Theses and Dissertations

Extracellular-regulated kinase 3 (ERK3) is overexpressed in a variety of cancers, including lung cancer. This atypical mitogen-activated protein kinase (MAPK) has a unique structure which includes a C34 domain and C-terminus and about which relatively little is known. ERK3 has been demonstrated to promote cell migration and metastasis in multiple cancer types. A yeast two-hybrid assay using ERK3 as bait indicated Diacylglycerol kinase ζ (DGKζ) is a binding partner. DGKζ is an isoform in the DGK family, all the members of which phosphorylate the lipid diacylglycerol (DAG) to generate phosphatidic acid (PA). DGKζ was shown to promote migration in mouse …

Reflecting On Recurring Failures In Iot Development, Dharun Anandayuvaraj, James C. Davis

Department of Electrical and Computer Engineering Faculty Publications

As IoT systems are given more responsibility and autonomy, they offer greater benefits, but also carry greater risks. We believe this trend invigorates an old challenge of software engineering: how to develop high-risk software-intensive systems safely and securely under market pressures? As a first step, we conducted a systematic analysis of recent IoT failures to identify engineering challenges. We collected and analyzed 22 news reports and studied the sources, impacts, and repair strategies of failures in IoT systems. We observed failure trends both within and across application domains. We also observed that failure themes have persisted over time. To alleviate …

Extraction Of Melanin From Black Knot Fungus: Optimization And Applications, Amara Davis

Williams Honors College, Honors Research Projects

The goal of this research project was to optimize the extraction of melanin from black knot fungus and to analyze possible applications of the extracted melanin. An extraction method that was previously created was examined for possible improvements. Improvements that were studied include the elimination of steps in the extraction process while obtaining the same quality of product, examining options for machinery that could be used to increase production rate when moved to a production plant setting, and optimize the concentrations of the raw materials that are used in the extraction for possible reduction of cost without compromising yield or …

Retaining Thermoresponsive Poly(Vinyl Methyl Ether) To Cellulose Via (3-Aminopropyl)Triethoxylsilane Network, Grace Tolhurst

Williams Honors College, Honors Research Projects

Stimuli-responsive supports and devices that are fabricated from inexpensive materials are attractive candidates for a variety of applications, such as environmental protection, and regenerative medicine. Poly(vinyl methyl ether) (PVME), a thermoresponsive polymer (TRP), has recently been used as thermoresponsive cell culture supports for cell growth/proliferation followed with cell/cell sheet harvesting by simply switching temperature. Cellulose is an attractive candidate to replace glass/silicone supports as it is inexpensive and environmentally friendly. This project focuses on retaining PVME to the cellulose membrane via 3-aminopropyltriethoxysilane (APTES) network to generate TR membranes and flexible liners that can be incorporated into bioreactors for producing cells …

Electrochemical Impedance Spectroscopy Analysis Of Corrosion Of Reinforcing Steel In Fly Ash Mortar By Means Of Transmission Line Modeling, Padraig Stack

Williams Honors College, Honors Research Projects

Electrochemical impedance spectroscopy (EIS) is an important non-destructive tool that allows for a deeper understanding of the electrochemical processes and mechanisms occurring in an electrochemical cell. Equivalent electrical circuits (EECs) are used to model the impedance data into electrical components, such as resistors and capacitors, on a circuit. Current potentiostat offers software packages that can analyze the frequency response, but the software only supports “simple” EEC that can be written as fixed electrical components in some combination of series and parallel. Park and Macdonald propose a transmission line model (TLM) that does not use lumped-element models, instead, the values of …

Mimicking The Namib Desert Beetle With Hydrophilic And Hydrophobic Surfaces, Tyler Bracewell

Williams Honors College, Honors Research Projects

The Namib Desert beetle, Stenocara gracilipes, condenses fog that rolls in off the west coast of Namibia to provide itself with the water it needs for the day. By lifting its abdomen into the air to collect the water vapor, it condenses on hydrophilic bumps that are about 500μm in diameter and are spaced apart about 500-1500μm. Once the water reaches a critical size, the droplet rolls off the hydrophilic bump and onto the flat hydrophobic surface of the elytra. Since the beetle is angled with its abdomen in the air, the water rolls down to its mouth. A …

Goals And Proceedings Information, Preface And Acknowledgments, William S. Walker Iii, Lynn A. Bryan Ph. D., S. Selcen Guzey, Elizabeth Suazo-Flores

Indiana STEM Education Conference

No abstract provided.

Integrating Deep Learning And Hydrodynamic Modeling To Improve The Great Lakes Forecast, Pengfei Xue, Aditya Wagh, Gangfeng Ma, Yilin Wang, Yongchao Yang, Tao Liu, Chenfu Huang

Civil & Environmental Engineering Faculty Publications

The Laurentian Great Lakes, one of the world’s largest surface freshwater systems, pose a modeling challenge in seasonal forecast and climate projection. While physics-based hydrodynamic modeling is a fundamental approach, improving the forecast accuracy remains critical. In recent years, machine learning (ML) has quickly emerged in geoscience applications, but its application to the Great Lakes hydrodynamic prediction is still in its early stages. This work is the first one to explore a deep learning approach to predicting spatiotemporal distributions of the lake surface temperature (LST) in the Great Lakes. Our study shows that the Long Short-Term Memory (LSTM) neural network, …

Tractor Test 2253: John Deere 9rx 590, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2261: John Deere 6140m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test 2248: John Deere 9rt 470, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2255: John Deere 5100m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2256: John Deere 5115m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Tractor Summary: 1234 John Deere 6r 145, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Tractor Summary: 1238 John Deere 6r 195 Diesel Infinitely Variable Transmission, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary : 1235 John Deere 6r 155 Diesel Infinitely Variable Transmission, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Graphene Derivatives Reinforced Metal Matrix Nanocomposite Coatings: A Review, Hamed Sadabadi, Omid Ghaderi, Amir Kordijazi, Pradeep K. Rohatgi

Journal of Metals, Materials and Minerals

Due to the extraordinary mechanical, thermal, and electrical properties of graphene, graphene oxide (GO), and reduced graphene oxide (rGO), these materials have the potential to become ideal nanofillers in the electrodeposited nanocomposite coatings. This article provides an overview of literature on the improvements of properties associated with graphene, GO, and rGO-reinforced coatings, along with the processing parameters and mechanisms that would lead to these improvements in electrodeposited metal matrix nanocomposite coatings, where those affected the microstructural, mechanical, tribological, and anti-corrosion characteristics of coatings. The challenges associated with the electroplating of nanocomposite coatings are addressed. The results of this survey indicated …

The Correlation Between Phase Formation And The Structure Of The Pellets With The Fungal Immobilization Study As A Commercial Substrate Culture/Planting Material, Rattiphorn Sumang, Rampai Kodsueb, Narathip Vitayakorn, Ruangwut Chutima

Journal of Metals, Materials and Minerals

Calcined clay pellets are popular planting material for those who love to grow plants in pots. The calcined clay pellets consist of clay (C), phosphate rock (PR), and rice husk ash (RHA). [(1-x)(50C–50PR)-xRHA], x(RHA) = 0, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, and 0.65 wt% were prepared by a conventional solid-state reaction method. The samples were made into a spherical shape with a diameter of 10 mm and fired at 600℃ to 1000℃. The effect of x contents on phase formation, microstructure, and chemical properties of [(1-x)(50C–50PR)-xRHA] was studied. X-ray diffraction revealed the typical assemblages with quartz, illite, …

Synthesis And Antimicrobial Studies Of Nano-Copper Doped Carbon Substrates; Activated Carbon, Reduced Graphene Oxide, And Carbon Nanofiber, Songwuit Chanthee, Jenjira Jirasangthong, Channarong Asasvatesanupap, Malee Santikunaporn

Journal of Metals, Materials and Minerals

Copper oxides (CuxO) have received considerable attention as a result of their biological activity. Nanoparticles (NPs) of CuxO attached to different substrates exhibit a wide spectrum of antimicrobial activity against bacteria and viruses, with similar properties to silver. The antimicrobial activity of CuxO-NPs doped on distinctive carbon materials was investigated for three carbon substrates: apricot stone activated carbon (AAC), reduced graphene oxide (rGO) and carbon nanofiber (CNF). The CuxO-NPs (5 wt%) doped AAC and rGO substrates were prepared by impregnation of copper nitrate followed by a thermal treatment process, while a similar weight of CuxO-NPs doped CNF was fabricated by …

Research Progress Of Novel Zirconium Alloys With High Strength And Toughness, Na Zhang, Chaoqun Xia, Jiaqian Qin, Qiang Li, Xinyu Zhang, Riping Liu

Journal of Metals, Materials and Minerals

Atoms of zirconium (Zr) are often known as "first metals of the atomic age". Because of its low cross section for thermal neutron absorption, excellent corrosion resistance, and good mechanical and processing properties, it is extensively used in the nuclear industry. As the properties requirements of materials in chemical, medical and aerospace fields turn out to be higher, the application of Zr alloys in these non-nuclear fields has become more and more widespread due to their excellent properties. In addition to having a high melting point, Zr alloys also have a high specific strength and low thermal expansion coefficient. Therefore, …

Rice Husk Ash Utilization, Composition And Properties: A Brief Review, Vignesh Nayak Ullal, Shivaramu H. T., Aveen K. P.

Journal of Metals, Materials and Minerals

Asian countries rely massively on rice to feed and sustain its massive population. For long the staple food has provided nourishment to the masses and the classes. Rice is grown in large quantities in Asian countries. A by-product of its cultivation is its husk. The husk of the rice grain is mainly utilized as a fuel for the boilers in the rice mills. The uncontrolled burnt rice husk referred to as rice husk ash consists majorly of silica. silica is used in a wide variety of commercial and industrial applications. Use of rice husk ash in various products serves to …

Development Of Fexoy Particle Onto Bacterial Cellulose Network By Forced Hydrolysis And Its Electrical Conductivity, Prompong Khamwongsa, Poramed Wongjom, Andi Magattang Gafur Muchlisc, Chun Che Lin, Seranee Srisuk, Sarute Ummartyotin

Journal of Metals, Materials and Minerals

FexOy particle and bacterial cellulose composite sheet was successfully prepared by forced hydrolysis. The presence of Fe3+ ions in bacterial cellulose suspension significantly provided the positive charge due to electrostatic force as reported by Zeta potential. With the pH of 12 of bacterial cellulose suspension, particle was nucleated between bacterial cellulose networks. Fourier transform infrared exhibited Fe-O stretching. X-ray diffraction reported that the mixture of Fe2O3 and Fe3O4 was existed onto bacterial cellulose composite. Scanning electron microscope reported that FexOy particle was randomly distributed in bacterial cellulose network. Intensity of Fe was qualitatively observed by energy dispersive analysis. With the …

Synthesis And Characterization Of Hybrid Shell Microcapsules For Anti-Corrosion Ni-Co Coating, Hamed Sadabadi, Saeed Reza Allahkaram, Omid Ghader, Pradeep K. Rohatgi

Journal of Metals, Materials and Minerals

This paper presents the results of the study of microcapsules synthesized using a novel hybrid shell of polyureaformaldehyde/SiO2 (PUF/SiO2) and a core of linseed oil. The synthesis was accomplished by facial polymerization combined with sol-gel of TEOS, and urea-formaldehyde resin to form the hybrid shell under optimal process parameters. The microcapsules were embedded in a metal coating using the electrodeposition method. Microcapsules were characterized by scanning electron microscope (SEM, FE-SEM), energy-dispersive spectroscopy (EDS), particle size analyzer (PSA), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). The experimental results indicated that the average size of capsules synthesized umder the optimum processing …

Dyeing Of Curcumin And Durable Press Finishing With Citric Acid On Cotton Fabric Using One Step Process, Supannee Boonroeng, Piyaporn Kampeerapappun

Journal of Metals, Materials and Minerals

Cotton is an affordable and durable option for clothing. However, cotton garments tend to wrinkle easily. Therefore, cotton fabrics were studied to improve their wrinkle resistance properties. In this work, curcumin was mixed in an aqueous solution of citric acid and its catalyst and applied to cotton fabric using pad-dry-cure process for both the dyeing and finishing properties. Aloe vera extract and chitosan were used to compare for the reaction of their functional groups with carboxyl groups of citric acid on cotton fabrics. The mixture of curcumin and citric acid solution showed anti-wrinkle properties on the treated cotton. There were …

Magnetic Nanoparticles Coated With Zwitterionic Copolymer As An Advanced Material For Rapid And Instrument-Free Biomolecular Detection In Human Serum, Supannika Boonjamnian, Varunee Sadsri, Voravee P. Hoven, Piyaporn Na Nongkhai

Journal of Metals, Materials and Minerals

The traditional agglutination assays especially those based on polystyrene beads have been recognized as convenient tools for disease diagnosis despite their limited detection range and low sensitivity. Unlike other particles namely polystyrene beads, SiO2 and gold nanoparticles having insignificant magnetic properties, magnetic nanoparticles (MNPs) offer unique advantages as their magnetic properties for agglutination methods. In the presence of magnet, not only can they be used to enrich the samples, but also their aggregation can also be induced, providing sensitive and rapid measurements. This work aims to develop MNPs for aggregation-based biomolecular detection. The MNPs were surface-modified with PMAMPC via an …