Digital Commons Network^™

Biomimetic Habitats For Cells: Ordered Matrix Deposition And Differentiation In Gingival Fibroblasts Cultured On Hydroxyapatite Coated With A Collagen Analogue, Rajendra S. Bhatnagar, Jing Jing Qian, Anna Wedrychowska, Eric Dixon, Nancy Smith

Cells and Materials

In tissues, cells attach and migrate on collagen. Interaction with collagen modulates cell proliferation and differentiation. We propose that similar environments may be constructed by immobilizing collagen-derived cell-binding peptides in a three-dimensional (3-D) template. We identified a cell binding domain of type I collagen and showed that a 15-residue synthetic analogue (P-15) binds cells with high affinity. In the present study, we compared the behavior of human gingival fibroblasts (HGF) in culture on hydroxyapatite (HA) and on HA-P-15. HGF cultured on HA formed sparse monolayers with little order and deposited a scant matrix. HGF on HA-P-15 formed highly oriented 3-D …

Biological Fixed-Film Systems, Mark W. Fitch, Jeffrey B. Murphy, Stephen S. Sowell

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Microbiological Degradation of Wastewater and its Application using a Fixed-Film Reactor is Reviewed. the Technical and Technological Characteristics, as Well as the Efficiency of Nitrification and Denitrification Processes Were Taken into Consideration. the Review Elucidated the Experimental Measurements of Effective Diffusive Permeabilities and Effective Diffusion Coefficients of Biofilms.

Derivation Of Equations Of Motion For A Four Link Robotic Leg For A Walking Vehicle, Andrew B. Wright

Journal of the Arkansas Academy of Science

A four degree of freedom leg for a walking robot has been modeled using Newton's method. Unlike robot manipulators, which have a fixed base, a leg model must include inertial forces due to base motion. These forces have been included in the formulation. These equations can be used for design, simulation, and control. The inverse kinematics for this leg are also presented. This allows the joint angles to be computed from a desired foot-hold position.

Nuclear Fuel Pellet Inspection Using Artificial Neural Networks, Shahla Keyvan, Xiaolong Song, Mark Kelly

Nuclear Engineering and Radiation Science Faculty Research & Creative Works

Nuclear fuel must be of high quality before being placed into service in a reactor. Fuel vendors currently use manual inspection for quality control of fabricated nuclear fuel pellets. In order to reduce workers' exposure to radiation and increase the inspection accuracy and speed, the feasibility of automation of fuel pellet inspection using artificial neural networks (ANNs) is studied in this paper. Three kinds of neural network architectures are examined for evaluation of the ANN performance in proper classification of good versus bad pellets. Two supervised neural networks, back-propagation and fuzzy ARTMAP, and one unsupervised neural network called ART2-A are …

Production Of Biogenic Mn Oxides By Leptothrix Discophora Ss-1 In A Chemically Defined Growth Medium And Evaluation Of Their Pb Adsorption Characteristics, Yarrow M. Nelson, Leonard W. Lion, William C. Ghiorse, Michael L. Shuler

Civil and Environmental Engineering

Biogenic Mn oxides were produced by the bacterium Leptothrix discophora SS-1 (= ATCC 3182) in a chemically defined mineral salts medium, and the Pb binding and specific surface area of these oxides were characterized. Growth of SS-1 in the defined medium with pyruvate as a carbon and energy source required the addition of vitamin B₁₂. Complete oxidation of Mn(II) within 60 h required the addition of ≥0.1 μM FeSO₄. Pb adsorption isotherms were determined for the biogenic Mn oxides (and associated cells with their extracellular polymer) and compared to the Pb adsorption isotherms of cells and …

Optimized Calibration For Unsteady Flow Modeling Using A Genetic Algorithm, Daniel Sanchez, Jerome A. Westphal

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The calibration of an unsteady flow model generally relies on the estimation of roughness coefficients, which act as descriptors of friction resistance along the channel. Here an optimized procedure is implemented by incorporating a genetic algorithm (GA) to automate the process. This approach is suitable because discrete parameters are considered. The target is a one-dimensional unsteady flow model in which the roughness coefficient is allowed to vary not only along the river axis, but also dynamically with discharge. The objective function is the root mean square of the difference between measured and computed water levels at a given cross section. …

Effects Of Dissolved Organic Matter And Ph On Heavy Metal Uptake By Sludge Particulates Exemplified By Copper(Ii) And Nickel(Ii): Three-Variable Model, Jianmin Wang, C. P. Huang, Herbert E. Allen, Ira Poesponegoro, Haryanto Poesponegoro, Luis R. Takiyama

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Dissolved organic matter (DOM) and pH are important factors affecting heavy metal uptake by sludge particulates. Copper(II) and Nickel(II) uptake behavior by primary and secondary sludge particulates was studied under various pH and DOM conditions. A three-variable model, incorporating effects of pH and DOM, was developed to describe heavy metal uptake. Results show that heavy metal uptake by sludge particulates can be better described by the three-variable model than by the modified Langmuir model in a wide pH range.

Nebraska Summary: S296 New Holland Ts 110, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Report Of The Poplar Working Group, Steve Strauss

United States Department of Energy: Publications

Poplars consist of all species of the genus Populus, including cottonwoods, aspens, and the many interspecies hybrids in common use (Dickmann and Stuart 1983). Our working group focused on the fungal pathogens, arthropod herbivores, and weed competitors of Populus in the United States. However, bacterial and viral diseases of Populus are significant in Europe, and genetic engineering approaches toward their control or management are being studied. The key aspects of poplar biology important to understanding the use of pest resistance genes are described below.

Metal Oxide Surfaces And Their Interactions With Aqueous Solutions And Microbial Organisms, Gordon E. Brown Jr., Victor Henrich, William Casey, David Clark, Carrick Eggleston, Andrew Felmy Andrew Felmy, D. Wayne Goodman, Michael Gratzel, Gary Maciel, Maureen I. Mccarthy, Kenneth H. Nealson, Dimitri Sverjensky, Michael Toney, John M. Zachara

United States Department of Energy: Publications

During the past decade, interest in chemical reactions occurring at metal oxide-aqueous solution interfaces has increased significantly because of their importance in a variety of fields, including atmospheric chemistry, heterogeneous catalysis and photocatalysis, chemical sensing, corrosion science, environmental chemistry and geochemistry, metallurgy and ore beneficiation, metal oxide crystal growth, soil science, semiconductor manufacturing and cleaning, and tribology. The metal oxide-aqueous solution interface is reactive due to acid-base, ligand-exchange, and/or redox chemistry involving protons (hydronium ions), hydroxyl groups, aqueous metal ions, and aqueous organic species and also complexes among these species. Interfacial localization of those species (adsorption) may result from electrostatic, …

Remedy Selection For Cleanup Of Uncontrolled Waste Sites, Paul D. Bennett, Brad Brumbach, Tyrone W. Farmer, Preston L. Funkhouser Iv, Allen W. Hatheway

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Selection of remedy for uncontrolled hazardous waste sites involves comparisons of various technological approaches for minimization of threats and achievement of cleanup action levels. Approaches specified in the Comprehensive Environmental Response, Compensation and Liability Act (SUPERFUND Law) National Contingency Plan (40 CFR 300) are broadly labeled as actions, alternatives, and technologies. We have found considerable perplexity in denoting the rank-hierarchy of these approaches and have developed a classification system for dealing with the totality of available measures for consideration in selection of remedy.

Natural Treatment And On-Site Processes, Kevin D. White, Joel Gerard Burken

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Natural Treatment Systems, Which is Divided into Land-Treatment, Wetland, Aquatic, Onsite and Small Community, and Phytoremediation Systems, Are Discussed. This Include the Free Water Surface Constructed Wetlands, Subsurface Flow Constructed Wetlands, Vertical Flow Constructed Wetlands,ponds, Floating Aquatic Plant Systems, Solar Aquatic Systems, Small Treatment Systems, and In-Ground Disposals.

Frequency Domain Robustness Analysis Of Hopfield And Modified Hopfield Neural Networks, Jie Shen, S. N. Balakrishnan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A variant of Hopfield neural network, called the modified Hopfield network, is formulated in this study. This class of networks consists of parallel recurrent networks which have variable dimensions that can be changed to fit the problem under consideration. It has a structure to implement an inverse transformation that is essential for embedding optimal control gain sequences. Equilibrium solutions of this network are discussed. The robustness of this network and the classical Hopfield network are carried out in the frequency domain using describing functions

Online Identification And Control Of Aerospace Vehicles Using Recurrent Networks, Zhenning Hu, S. N. Balakrishnan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Methods for estimating the aerospace system parameters and controlling them through two neural networks are presented in this study. We equate the energy function of Hopfield neural network to integral square of errors in the system dynamics and extract the parameters of a system. Parameter convergence is proved. For control, we equate the equilibrium status of a "modified" Hopfield neural network to the steady state Riccati solution with the system parameters as inputs. Through these two networks, we present the online identification and control of an aircraft using its nonlinear dynamics.

Functional Interdependence And Product Similarity Based On Customer Needs, Daniel A. Mcadams, Robert B. Stone, Kristin L. Wood

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In this paper, related product functions are determined for a group of approximately 70 consumer products. Using customer need data, a new matrix approach is introduced to identify these relationships. Techniques are then created for determining product similarity. These techniques are clarified and validated through three case studies, including beverage brewers and material-removal products. The results of these case studies are argued to have significant impact on design-by-analogy procedures, benchmarking methods, mass customization strategies and modular design. The paper concludes with a discussion of applications and related procedures for product development.

Kentucky Water Resources Research Institute Annual Technical Report Fy 1998, Kentucky Water Resources Research Institute, University Of Kentucky

KWRRI Annual Technical Reports (USGS’s 104b Grant Program)

This document consolidates the reporting requirements of the base grant and regional competitive grant awards in a single technical report which includes: 1) a synopsis of each ongoing research project and of each research project completed during the period, 2) a list of reports published, 3) a brief description of information transfer activities, 4) a summary of student support during the reporting period, and 5) notable achievements and awards during the year.

Optimization Of Insertion Holes And Anchor Design For Cylinder Shaped Toggle Type Suture Anchors, Adam Fedenia

Masters Theses

This research was performed to optimize insertion holes and anchor design for cylinder shaped toggle type suture anchors. Four types of anchors were investigated in terms of pull strength and design in acrylic plate and pig bone. They included small type A and B anchors and large type A and B anchors.

Pull strength trends suggest that the small type anchors behave similarly since their external dimensions are identical, with the exception of type A anchor having a hole running from one end of the cylinder to the other like a pipe. It was found that the suture would fail …

A Classification Of Techniques For The Compensation Of Time Delayed Processes. Part 1: Parameter Optimised Controllers, Aidan O'Dwyer, John Ringwood

Conference papers

An extensive literature exists on the compensation of time delayed processes. It is possible to identify themes that are common to many of the available techniques. The intention of the two parts of this paper is to provide a framework against which the literature may be viewed; Part 1 of the paper considers the use of parameter optimised controllers for the compensation problem, with Part 2 of the paper considering the use of structurally optimised compensators. Conclusions are drawn at the end of Part 2.

Nebraska Summary 363: Massey Ferguson 8250 Diesel 32-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 302: Massey Ferguson 6265 Diesel 32-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 305: Massey Ferguson 6290 Diesel 32-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 317: Massey Ferguson 263 Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary 316: Massey Ferguson 243 Diesel 8-Speed, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA

The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data.

EXPLANATION OF THE TEST PROCEDURES

Purpose

The purpose of …

Nebraska Summary: S325 Case-Ih C60, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S279 Massey Ferguson 4253, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S323 New Holland Tv140, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S281 New Holland 8184, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S324 Case-Ih C50, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S330 New Holland Tn55, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S332 New Holland Tn75d, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …