Digital Commons Network^™

Local Applications Of The National Livestock And Poultry Environmental Stewardship Curriculum, Diane Huntrods, Richard K. Koelsch, Frank Humenik

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

This paper introduces the LPES curriculum project, summarizing the curriculum development process, the final curriculum materials, and the outreach activities. Following an overview of the LPES Curriculum Impact Survey, the authors will present representative examples of uses and modifications made of the LPES curriculum as it is used with targeted audiences. This model for utilizing national expertise to address state and local educational needs may have benefit in other extension education programs as land grant university resources decrease. The paper concludes with a discussion of lessons learned from this national extension education curriculum development effort.

Short Pulse Laser Propagation Through Tissues, Champak Das, Ashish Trivedi, Kunal Mitra, Tuan Vo-Dinh

Biomedical Engineering and Sciences Faculty Publications

An experimental and numerical study is performed to analyze short pulse laser propagation through tissue phantoms without and with inhomogeneities/tumors imbedded in it. Short pulse laser probing techniques has distinct advantages over conventional very large pulse width or cw lasers primarily due to the additional information conveyed about the tissue interior by the temporal variation of the observed signal. Both the scattered temporal transmitted and reflected optical signals are measured experimentally using a streak camera for samples irradiated with a short pulse laser source. Parametric study involving different scattering and absorption coefficients of tissue phantoms and inhomogeneities as well as …

A System Dynamics Model Of The Pacific Coast Rockfish Fishery, Wayne Wakeland, Olgay Cangur, Guillermo Rueda, Astrid Scholz

Complex Systems Faculty Publications and Presentations

This paper presents a model of the dynamic behavior of the yellowtail rockfish of the Pacific Coast of the United States. The purpose of the model is to generate endogenously the historical data for fish population, fishing vessels, regulatory parameters, and fish harvest. The model was subjected to a variety of tests to determine its sensitivity to changes in key parameters and initial values, including extreme conditions. Model results indicate that acceptable biological catch and fleet capacity must be adjusted quickly in response to changing conditions, in order to improve fishery sustainability. Additional analysis reinforces the policy of setting the …

Progress In Spectroscopic Ellipsometry: Applications From Vacuum Ultraviolet To Infrared, James N. Hilfiker, Corey L. Bungay, Ron A. Synowicki, Thomas E. Tiwald, Craig M. Herzinger, Blaine Johs, Greg K. Pribil, John A. Woollam

Department of Electrical and Computer Engineering: Faculty Publications

Spectroscopic ellipsometry (SE) is a noncontact and nondestructive optical technique for thin film characterization. In the past 10 yr, it has migrated from the research laboratory into the semiconductor, data storage, display, communication, and optical coating industries. The wide acceptance of SE is a result of its flexibility to measure most material types: dielectrics, semiconductors, metals, superconductors, polymers, biological coatings, and even multilayers of these materials. Measurement of anisotropic materials has also made huge strides in recent years. Traditional SE measurements cover the ultraviolet, visible, and near infrared wavelengths. This spectral range is now acquired within seconds with high accuracy …

Inside Unlv, Gian Galassi, Carol C. Harter, Gene Hall

Inside UNLV

No abstract provided.

Applicability Of Risk-Based Management And The Need For Risk-Based Economic Decision Analysis At Hazardous Waste Contaminated Sites, I. Khadam, Jagath J. Kaluarachchi

Civil and Environmental Engineering Faculty Publications

Decision analysis in subsurface contamination management is generally carried out through a traditional engineering economic viewpoint. However, new advances in human health risk assessment, namely, the probabilistic risk assessment, and the growing awareness of the importance of soft data in the decision-making process, require decision analysis methodologies that are capable of accommodating non-technical and politically biased qualitative information. In this work, we discuss the major limitations of the currently practiced decision analysis framework, which evolves around the definition of risk and cost of risk, and its poor ability to communicate risk-related information. A demonstration using a numerical example was conducted …

Characterization And Optimization Of A Chromatographic Process Based On Ethylenediamine-N,N,N′,N′-Tetra(Methylphosphonic) Acid-Modified Zirconia Particles, Sabyasachi Sarkar, Peter W. Carr, Clayton V. Mcneff, Anuradha Subramanian

Papers in Biotechnology

The primary objective of work was to characterize, optimize and model a chromatographic process based on ethylenediamine-N,N,N′,N′-tetra(methylphosphonic) acid (EDTPA)-modified zirconia particles. Zirconia particles were produced by spray-drying colloidal zirconia. Zirconia spheres produced were further classified, calcined and modified with EDTPA to yield a solid-phase support for use in bio-chromatography (r_PEZ). Specifically, the ability of r_PEZ to selectively bind and enrich IgG, IgA, and IgM from biological fluids was evaluated and demonstrated. To better understand the force of interaction between the IgG and the r_PEZ, the equilibrium disassociation constant (Kd) was determined by static binding isotherms, as a function of temperature …

A Multiobjective Sdss For Management Of Urbanizing Watersheds: The Case Of The Lower Kaskaskia Basin, Illinois, Kyle O. Allred, John W. Nicklow, Misgana K. Muleta, Leslie A. Duram

Civil and Environmental Engineering

The conversion of natural and agriculturally dominated watersheds to industrial, commercial and residential developments leads to a cascade of adjustments in runoff quantity and stream quality at locations further downstream. The use of sophisticated hydrologic simulation models and Geographic Information Systems (GIS) has become the standard for evaluating these impacts of urban sprawl on water resources systems. Simulation and GIS models alone, however, are incapable of directly revealing optimal land development patterns that meet specified objectives. This paper describes the development of a multi-objective Spatial Decision Support System (SDSS) designed to overcome this limitation. The SDSS is created by integrating …

Catalytic Wet Oxidation Of Phenol By Hydrogen Peroxide Over Pillared Clay Catalyst, Jing Guo, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Extrudates of Al-Fe Pillared Clay Catalyst Suitable for Packed-Bed Operations Are Evaluated for Wastewater Treatment Via a Wet Oxidation Process Employing Hydrogen Peroxide as the Oxidant. the Reaction Was Carried Out in a Semibatch Basket Reactor under Rather Mild Conditions. Operational Parameters Were Studied under the Following Conditions: Temperature from 25 to 90 °C, Atmospheric Pressure, Initial Phenol Concentration from 100 to 2000 Ppm of the Liquid Phase, Catalyst Loading from 0 to 10 G/L, and Input H2O2 Concentration from 0.15 to 0.6 Mol/L. under These Conditions, the Al-Fe Pillared Clay Catalyst Achieves a Total Elimination of Phenol and Significant …

Learning Rules From System Call Arguments And Sequences For Anomaly Detection, Guarav Tandon, Philip K. Chan

Electrical Engineering and Computer Science Faculty Publications

Many approaches have been suggested and various systems have been modeled to detect intrusions from anomalous behavior of systems calls as a result of an attack. Though these techniques have been shown to be quite effective, a key element seems to be missing -- the inclusion and utilization of the system call arguments to create a richer, more valuable signature and to use this information to model the intrusion detection system more accurately. We put forth the idea of adopting a rule learning approach that mobilizes rules based upon system calls and models the system for normal traffic using system …

Wright State University College Of Engineering And Computer Science Bits And Pcs Newsletter, Volume 19, Number 8, June 2003, College Of Engineering And Computer Science, Wright State University

BITs and PCs Newsletter

An eight page newsletter created by the Wright State University College of Engineering and Computer Science that addresses the current affairs of the college.

Optimization Of High-Strength Hydrocarbon Biodegradation Using Respirometry, Bunkim G. Chokshi, Yarrow M. Nelson

Civil and Environmental Engineering

Laboratory respirometry experiments were conducted on mixtures of soil and oily sludge to estimate biodegradation rates by CO₂ production rates and determine optimum conditions for biodegradation of high-strength hydrocarbon waste products. These experiments were used to determine a suitable range of total petroleum hydrocarbon (TPH) concentration for biological treatment and to optimize for nutrient addition and moisture content. CO₂ production rates from biological respiration of hydrocarbon-contaminated soil were maximized at concentrations of 3-9% TPH (30,00090,000 mg/kg TPH). CO₂ production rates decreased dramatically at concentrations above 9% TPH, indicating that either these concentrations are lethal to microbes present, …

Flight Physician - June, 2003, Civil Aviation Medical Association

Browse all Civil Aviation Medical Association Newsletters

A twenty page newsletter of the Civil Aviation Medical Association. The newsletter provided news about civil aviation medicine and information related to the organization.

Nsf Ccli: Developing A Molecular Biology Lab Course In Environmental Engineering And Science, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

A new course and associated short course, to teach molecular biology skills to undergraduate and graduate students in environment engineering and practitioners of environmental engineering across the state of Ohio and around the world, is developed. Environmental engineers use microorganisms as biocatalysts to degrade pollutants in sewage as well as in the sites undergoing bioremediation. A series of courses to introduce engineering students to the principles of biology, at the University of Cincinnati are developed. These courses include, 'introduction to environmental engineering', required for all third year civil engineering students.

Integrating Biological Principles In Environmental Engineering Education: Summary Results Of A Three-Year Pilot Study, Daniel B. Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Teaching biology to engineers is a challenge. For environmental engineers, biological principles are necessary to understand microorganisms that are removed from drinking water as well as microorganisms that treat waste in sewage treatment plants and bioremediation field sites. At the University of Cincinnati, we integrated state-of-the-art research in environmental microbiology within our graduate and undergraduate environmental engineering curricula. For the past three years, we taught a novel course entitled, "Molecular Biology in Environmental Engineering." Course evaluations over the past three years suggested that the course was successful for primarily two reasons, namely: (1) the course employed a problem-based learning approach …

Optimization Of Receptive Fields For Mlp Networks With Ensemble Encoding, Deena Osama Hassan

Archived Theses and Dissertations

Ensemble encoding is a biologically-motivated, distributed data representation scheme for MLP networks. Multiple overlapping receptive fields are used to enhance locality of representation. The number, form, and placement of receptive fields have a great impact on performance. This thesis presents four heuristics, two based on descriptive statistics, and two based on clustering, for optimizing receptive field configuration, and compares their performance on four benchmark data sets. The two statistical approaches are based on the mean and median properties of the data set. The two clustering methods are the c-means and fuzzy c-means clustering. The four data sets used are well-known …

Understanding Market Stakeholder Perspectives: Application In The Biopharmaceutical Industry, Halvard Nystrom, Kalayanee Poon-Asawasombat

Engineering Management and Systems Engineering Faculty Research & Creative Works

New products are sometimes perceived as risky. This article contributes a process that new product development teams can use to better understand stakeholders' concerns. the stakeholder analysis process is appropriate for products that can be perceived as risky since it enables developers to address key issues of concern prior to new product introduction, mitigating market acceptance risk. It uses a stakeholder model that facilitates dialogue to understand market risks and guide the assessment process. This article includes a case study describing a successful application of introducing biopharmaceutical products, as well as some of the key findings to demonstrate usefulness. © …

Assessment Of The Performance Of Shape Memory Alloys As Implant Devices, Noura Ali Al-Khalifi

Theses

Shape memory alloys are one class of the family of smart materials. They are considered as biomaterials, since they are well accepted by the human body. One special feature of shape memory alloys (SMA) is their ability to revert to their previous shape. This material is deformed at low temperature and when it is heated, it returns (remember) to its original form. Although, the implant binary NiTi SMA is particularly successful as a biomaterial, our NiTi SMA consist of more that 50% (55.7%) of nickel. The main purpose of this thesis was to evaluate the biological response of the shape …

Paints And Their Environmental Impacts On Human Health In The U.A.E, Masara Y. Al-Ameri

Theses

This thesis records the findings of a research program related to "Paints and Their Environmental Impacts on Human Health in the U.A.E". The study recommends attempt to find out what paint types are of a less harmful influence on human health within different building types in United Arab Emirates due to environmental conditions.

According to Larry W. Canter (1997) "Environmental Impact Assessment" can be defined as "the systematic identification and evaluation of the potential impact (effects) of proposed projects, plans, programs, or legislative actions relative to the physical- chemical, biological, cultural, and socioeconomic components of the total environment. The primary …

Inside Unlv, Kevin Force, Gian Galassi, Carol C. Harter, Stuart Mann

Inside UNLV

No abstract provided.

Parallel Simulation Of Microflows By Dsmc And Burnett Equations, Yichuan Fang

Dissertations

The primary objective of this dissertation is to numerically simulate and study the heat transfer and flow characteristics in fluidic microelectromechanical system (MEMS). In typical microfluidic MEMS applications, the ratio of the gas mean-free-path to the characteristic length scale, or the Knudsen number, can be large. The traditional mathematical models of continuum fluid based on the Navier-Stokes equations may become invalid because of their constitutive relations of viscous stress and heat flux.

In this study, the direct simulation Monte Carlo (DSMC) method and the conventional Burnett equations are applied to model the microflows in microchannels from molecular and continuum point …

Effects Of Implementation Of Decaborane Ions In Silicon, Cheng Li

Dissertations

The next generations of Si microelectronic devices will require ultra shallow p-type junctions formed by implantation of B ions with energies below 1 keV, at which available beam currents are severely limited by space charge effects. To solve this problem, decaborane (B₁₀H₁₄) cluster ion implantation has been suggested as an attractive alternative to conventional B implants, because one decaborane ion implants ten B atoms simultaneously and each of the B atoms only carries approximately 1/11 of the total ion energy. Thus the same implantation depth and dose as with monomer B ions can be obtained using …

Theoretical And Experimental Studies Of The Field-Induced Phenomena In Flowing Suspensions, Nikolai Markarian

Dissertations

The present work describes results of experimental and theoretical studies of the behavior of dilute suspensions subject to high gradient AC electric fields. When a spatially non-uniform electric field is applied to a suspension, in which the particles and the suspending fluid have different dielectric permittivities andlor conductivities, the particles migrate towards the regions of high or low electric field strengths depending on the sign of their polarization. This phenomenon, referred to as dielectrophoresis, has found numerous applications for the control and manipulation of the particle motions.

Presented in Chapter 3 are the results of studying the field -induced motion …

Time-Frequency Investigation Of Heart Rate Variability And Cardiovascular System Modeling Of Normal And Chronic Obstructive Pulmonary Disease (Copd) Subjects, Douglas Alan Newandee

Dissertations

A study has been designed to add insight to some questions that have not been fully investigated in the heart rate variability field and the cardiovascular regulation system in normal and Chronic Obstructive Pulmonary Disease (COPD) subjects. It explores the correlations between heart rate variability and cardiovascular regulation, which interact through complex multiple feedback and control loops. This work examines the coupling between heart rate (HR), respiration (RESP), and blood pressure (BP) via closed-loop system identification techniques in order to noninvasively assess the underlying physiology.

In the first part of the study, the applications of five different bilinear time-frequency representations …

Discrete Element Simulation And Nonlinear Dynamic Analysis Of Particles In A Simple Lattice Structure, Liam E. Buckley

Theses

The study of particles interacting in lattice structures allows for insight into the complex interactions of granular flow, and the adaptation of such structures to mechanical apparatuses to handle the separation of bulk particulate matter. Applying methods of computer analysis to the interactions taking place within the particle-lattice system provides a particle level methodology to the study of the phenomenon taking place, as well as a stepping stone for future design of related devices.

A two prong approach is presented to the study of such particle-lattice systems. The first approach is composed of adapting an existing discrete element computer code …

Modification Of Biodegradable Polyesters With Inorganic Fillers, Georgia Chouzouri

Theses

In attempts to address the growing need of materials with controlled degradation characteristics and good mechanical properties for tissue engineering applications, composites based on biodegradable polymers and a potentially bioactive novel inorganic synthetic filler were produced and characterized. Composites were produced by solution mixing of a commercial polylactic acid, as well as a biodegradable thermoplastic polyester based on butylene adipate/succinate, with synthetic magnesium/aluminum carbonate minerals, known as hydrotalcites. Two types of hydrotalcites, at 30 wto/o filler level, were used: surface coated and uncoated. Composites were also melt-mixed in a twin-screw extruder for comparison.

Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), …

Role Of Catalyst And Substrate In Synthesis Of Single Wall Carbon Nanotubes, Amit Goyal

Theses

The synthesis of single wall carbon nanotubes (SWNTs) by the catalyticdisproportionation of carbon monoxide (CO) (i.e., Boudouard reaction) at I atm pressureand 700-800 C, has been systematically investigated in order to determine whether theprocess can be used for the large scale production. SWNT diameter distribution andmorphology were studied by Raman scattering, and scanning and transmission electronmicroscopy, respectively. X-ray diffraction was used to determine levels of the remnantcatalyst and support. Synthesis experiments were conducted using a three-stage processwith hydrogen to reduce the catalyst-precursor and argon to cool the system. Two typesof catalyst/support synthesis were studied: (1) Combustion synthesis to form catalyst …

Detecting Malfunction In Wireless Sensor Networks, Pablito C. Lake

Theses

The objective of this thesis is to detect malfunctioning sensors in wireless sensor networks. The ability to detect abnormality is critical to the security of any sensor network. However, the ability to detect a faulty wireless sensor is not trivial. Controlled repeatable experiments are difficult in wireless channels. A Redhat Linux. 7.0 Wireless Emulation Dynamic Switch software was used to solve this problem.

Six nodes were configured with a node acting as a base station. The nodes were all part of a cell. This means that every node could communicate with all other nodes. A client-server program simulated the background …

Low-Power Transceiver Design For Mobile Wireless Chemical Biological Sensors, Harshavardhan Reddy Sripuram

Theses

The design of a smart integrated chemical sensor system that will enhance sensor performance and compatibility to Ad hoc network architecture remains a challenge. This work involves the design of a Transceiver for a mobile chemical sensor. The transceiver design integrates all building blocks on-chip, including a low-noise amplifier with an input-matching network, a Voltage Controlled Oscillator with injection locking, Gilbert cell mixers, and a Class E Power amplifier making it as a single-chip transceiver. This proposed low power 2GHz transceiver has been designed in TSMC 0.35~lm CMOS process using Cadence electronic design automation tools. Post layout HSPICE simulation indicates …

Process-Structure-Property Relationship Of A Mesogenic Bioerodible Polyarylate, Seung Uk Yoo

Theses

Polymeric biomaterials are artificially synthesized polymers designed for in-vivo use. The material must be characterized and should satisfy the requirements suitable in human bodies.

For the proper characterization of materials, it is essential to apply specific processes, analyze thermal and mechanical properties, and understand the process effect and the morphology. Thermal analysis is one of the most sophisticated and well developed techniques for polymer characterization. Turi [ 1 ] has explained about the thermal characterization of polymeric materials. Jaffe et al [2], in the chapters of characterization of fibers and films, emphasized the effect of the process history of a …