Digital Commons Network^™

Characterization Of A Dual Acoustic Receiver System For Measuring Range And Bearing To Acoustic Tags, Victoria Campana, Justin Knight

Computer Engineering

Experiements were performed to determine the effectiveness of the Lotek RT-A Hydrophone system and if it could provide the data necessary for a particle filter to determine the location of a shark. Over the period of a few months, we tested off the Cal Poly Pier at set GPS coordinates to characterize how accurately the Lotek System can determine range and orientation. Ranges from 0-500 meters were tested with the Lotek system being in a stationary position and Lotek receiver tag being put at specified GPS coordinates. The two hydrophone rigging was then rotated a full 360 degrees to gauge …

Design And Cost Analysis Of A Citrus Orchard, Travis Cox

BioResource and Agricultural Engineering

No abstract provided.

A Novel Exercise Device For Users In Wheelchairs: A Study Of Abdominal Muscle Activation, Rebecca Jo Campbell

Master's Theses

This study evaluates the use of a wheelchair balance board. The balance board was created as a sensory stimulation tool for users with various disabilities. It was originally designed to create vestibular stimulation for the person after they were loaded on.  This study was used as a way to test if the balance board could be used for other things such as physical therapy and exercise.  Ten able-bodied individuals were used to show the functionality of the device.  They were asked to perform six different abdominal exercises while the muscle activity of their rectus abdominis and external obliques was measured …

Measuring The Nanoindentation Properties Of Alendronate-Time Treated Canine Cortical, Folorunso Ashaolu

Master's Theses

This study examines the nanoindentation (energy inclusive) properties of 0.2 mg/kg alendronate treated ribs at one and three years against a vehicle treated control in a fresh-frozen, non-cold-mounted, condition.  This was to verify if the tissue-level properties for 0.2 ALN treated beagles would increase because of an increased level of mineralization despite a microdamage increase.

A total of twelve (12) skeletally mature (1–2 years old) female beagle dogs were treated daily for three years and one year with oral doses of vehicle (VEH, 1 mL/kg saline) or alendronate (ALN, 0.2 Merck, Rahway, NJ). The 0.2 mg dose corresponds, on a …

Ischemia Impairs Vasodilation In Skeletal Muscle Resistance Artery, Kyle Remington Struthers

Master's Theses

Functional vasodilation in arterioles is impaired with chronic ischemia. We sought to examine the impact of chronic ischemia and age on skeletal muscle resistance artery function. To examine the impact of chronic ischemia, the femoral artery was resected from young (2-3mo) and adult (6-7mo) mice and the profunda femoris artery diameter was measured at rest and following gracilis muscle contraction 14 days later using intravital microscopy. Functional vasodilation was significantly impaired in ischemic mice (14.4±4.6% vs. 137.8±14.3%, p<0.0001 n=8) and non-ischemic adult mice (103.0±9.4% vs. 137.8±14.3%, p=0.05 n=10). In order to analyze the cellular mechanisms of the impairment, a protocol was developed to apply pharmacological agents to the experimental preparation while maintaining tissue homeostasis. Endothelial and smooth muscle dependent vasodilation were impaired with ischemia, 39.6 ± 13.6% vs. 80.5 ± 11.4% and 43.0 ± 11.7% vs. 85.1 ± 10.5%, respectively. From this data, it can be supported that smooth muscle dysfunction is the reason for the observed impairment in arterial vasodilation.

Development Of A Cubesat Instrument For Microgravity Particle Damper Performance Analysis, John Trevor Abel

Master's Theses

Spacecraft pointing accuracy and structural longevity requirements often necessitate auxiliary vibration dissipation mechanisms.  However, temperature sensitivity and material degradation limit the effectiveness of traditional damping techniques in space.  Robust particle damping technology offers a potential solution, driving the need for microgravity characterization.   A 1U cubesat satellite presents a low cost, low risk platform for the acquisition of data needed for this evaluation, but severely restricts available mass, volume, power and bandwidth resources.  This paper details the development of an instrument subject to these constraints that is capable of capturing high resolution frequency response measurements of highly nonlinear particle damper dynamics.

Characterization Of A Pdms Microfluidic Reactor For Synthesizing Quantum Dots, Brian Harley

Materials Engineering

A PDMS microfluidic reactor was made in Cal Poly’s class 1000 clean room for the purpose of synthesizing quantum dots.  The device master mold was made from a silicon substrate and SU-8 features 50μm tall.  The PDMS reactor was cast from that mold.  The flow rates of fluid through the channels, heating of the reactor and pressure in the reactor were measured in order to characterize the potential for synthesizing quantum dots.  Flow rates of 20 mL/hr through 4 mL/hr were tested to characterize the consistency of amount of time the fluid remains in the reactor at a constant flow …

Supervisory Evolutionary Optimization Strategy For Adaptive Maintenance Schedules, Zhaoxia Wang, C. S. Chang

Research Collection School Of Computing and Information Systems

No abstract provided.

Unlv Stars Unabridged Report, University Of Nevada, Las Vegas

Reports (USI)

University of Nevada, Las Vegas, by earning a 2011 Silver Rating in the Sustainability Tracking, Assessment & Ratings System (STARS), is ahead of the curve among public universities – and improving.

STARS is a voluntary, self–reporting framework developed by the Association for the Advancement of Sustainability in Higher Education (AASHE) to help measure sustainability performance over time and among colleges and universities nationwide. The UNLV Sustainability Council oversaw STARS, which by measuring sustainability can help UNLV to reduce energy consumption and waste, improve education, attract research, and generate jobs.

A rating of Silver puts UNLV in great company – with …

Processing Pdms Gecko Tape Using Isopore Filters And Silicon Wafer Templates, Boris Luu

Materials Engineering

Gecko tape was processed through nanomolding involving two types of templates. One template was a Millapore Isopore polycarbonate membrane filter and the other template was an n-type silicon wafer processed to include four different pore diameters. These pore diameters were 20, 40, 80, and 160 microns. AutoCAD was used to design to a mask to be used later during photolithography. Two n-type wafers were sputtered with aluminum, underwent photolithography, and then etched using reactive ion etching. A template was placed into a Petri dish and Sylgard 184 polydimethylsiloxane (PDMS) was poured on the template. Once the PDMS cured,   the 1 …

Oxidation Kinetics Of Silver Thin Films For Antimicrobial Applications In The Health Care Industry, Sean D. Morham

Materials Engineering

To determine if varying city water qualities from around the United States can support a developing “oxidation corrosion of silver thin films” method of creating aqueous ionic silver solutions for the anti-microbial treatment of healthcare linens, a test was devised holding all variables constant with the exception of water quality parameters. This corrosion style test was done in order to assess a pass/fail criteria of 25 ppb ionic silver concentration in the aqueous solutions which resulted from the corrosion of silver thin film coated substrates. Above 25 ppb being a pass, below 25 ppb being a fail. While varying the …

Improving Cal Poly Space Systems Infrastructure, Tyler Richier

Industrial and Manufacturing Engineering

The goal of this project was to increase the usable space for the club Cal Poly Space Systems to work on its projects, improve the safety for its members, and reduce the time it takes to manufacture its products. The project demonstrated the effectiveness of 5S in improving a workspace. Club members were measurably more comfortable in the work environment and spent less time looking for tools. Current rooms were made more professional by ridding the workplace of non-valued items and finding sensible locations for high-traffic items. Additional rooms were added and they should indisputably support club projects the upcoming …

Transverse Isotachophoresis Using Polyacrylamide Gel Electrodes, Mark P. Stambaugh

Master's Theses

Separation and isolation of a desired analyte from an impure sample solution containing numerous unwanted interfering agents is the first step of nearly every laboratory test performed in medicine and biology. Nucleic acids are often of particular interest to doctors and researchers, and although methods currently exist for their isolation, these procedures are costly in time, man-power, and real-estate. In addition to easing the execution of presently performed tests, mitigation or elimination of these drawbacks would make a large range of currently unperformed tests both practical and feasible.

This thesis presents a microfluidics-based approach to the isolation of nucleic acids …

A Neural Network Receiver For Em-Mwd Communication, Timothy P. Whitacre

Master's Theses

Baseband digital communication in electro-magnetic measurement while drilling (EM-MWD) systems is often corrupted by non-white surface noise. The inability to reliably decode the transmitted signals in a noisy environment limits the depth at which EM-MWD systems can operate. Correlation receivers, which are optimal in the presence of additive white Gaussian noise, can be sub-optimal in the presence of various types of field noise at different drilling sites.

This thesis investigates the application of artificial neural networks (ANN) as communication receivers in EM-MWD baseband digital communication systems. The performances of various ANN architectures and training algorithms are studied and compared with …

Poroelastic Finite Element Analysis Of A Heterogeneous Articular Cartilage Explant Under Dynamic Compression In Abaqus, Kelsey Kiyo Kam

Master's Theses

A poroelastic finite element model of a heterogeneous articular cartilage disc was

created to examine the tissue response to low amplitude (± 2% strain), low

frequency (0.1 Hz) dynamic unconfined compression (UCC). A strong correlation

has been made between the relative fluid velocity and stimulation of

glycosaminoglycan synthesis. A contour plot of the model shows the relative fluid

velocity during compression exceeds a trigger value of 0.25 μm/s at the radial

periphery. Dynamic UCC biochemical results have also reported a higher

glycosaminoglycan content in this region versus that of day 0 specimens. Fluid

velocity was also found not to be …

A Pmma Conductivity Pretreatment Microfluidics Device For The Optimization Of Electrokinetic Manipulations, Cameron Paul Purcell

Master's Theses

This project encompasses the design and development of a pretreatment microfluidic device for samples of physiological conductivity, namely a saline solution. The conductivity was reduced through the combination of dilution and ion removal using electric fields to enable downstream electro kinetic manipulations. The two major parts of this project include (1) designing a pretreatment protocol to reduce the conductivity of the sample solution to an acceptable level and (2) designing /fabricating a microchip that will effectively allow aim (1) to be performed on chip.

This project is one of the first to observe the effects of an electric field, used …

Rfid Classroom Management System, Andrew W. Wright

Master's Theses

Professors who manage large classes are unrealistically expected to grade each student fairly and accurately.  Even with all of the technological advancements that have occurred in the past thirty years, very little progress has been made in classroom management, and as a result, professors are not equipped with enough tools to successfully manage large class sizes.  Because radio frequency identification (RFID) technology is making its way into student issued identification cards, there is an opportunity to use it as a tool to aid professors in the classroom.  The focus of this paper is to discover the most effective system that …

Studying Milk Coagulation Kinetics With Laser Scanning Confocal Microscopy, Image Processing, And Computational Modeling, Richard Joseph Hennessy

Master's Theses

The kinetics of milk coagulation are complex and still not well understood. A deeper understanding of coagulation and the impact of the relevant factors would aid in both cheese manufacturing and also in determining the nutritional benefits of dairy products. A method using confocal microscopy was developed to follow the movement of milk fat globules and the formation of a milk protein network during the enzyme-induced coagulation of milk. Image processing methods were then used to quantify the rate of coagulation. It was found that the texture of the protein network is an indicator of the current status of the …

Characterization And Implementation Of A Decellularized Porcine Vessel As A Biologic Scaffold For A Blood Vessel Mimic, Aubrey N. Smith

Master's Theses

Every 34 seconds, someone in the United States suffers from a heart attack.  Most heart attacks are caused by atherosclerotic build up in the coronary arteries, occluding normal blood flow.  Balloon angioplasty procedures in combination with a metal stent often result in successful restoration of normal blood flow.  However, bare metal stents often lead to restenosis and other complications.  To compensate for this problem, industry has created drug-eluting stents to promote healing of the artery wall post stenting.  These stents are continually advancing toward better drug-eluting designs and methods, resulting in a need for fast and reliable pre-clinical testing modalities. …

Implementation And Assessment Of Hyperglycemic Conditions For The Creation Of A Diabetic Blood Vessel Mimic, Vikramaditya Mediratta

Master's Theses

Introduction: Diabetes Mellitus is a metabolic disorder that affects a person’s ability to either produce insulin (Type I diabetes mellitus) or properly use insulin (Type II diabetes mellitus) in order to maintain adequate blood glucose levels. The most severe diabetic complications arise due to hyperglycemia – a state of extremely high blood glucose levels – such as, coronary artery disease (CAD), in which coronary stent therapy is a popular method of treatment. However, research has shown a high rate of in-stent restenosis in diabetic patients with CAD, most likely due to activation of cellular adhesion molecules on endothelial cells exposed …

Seawater/Wastewater Production Of Microalgae-Based Biofuels In Closed Loop Tubular Photobioreactors, Joshua Bradley Lowrey

Master's Theses

The push for alternatives to petroleum fuels has forced researchers to look for highly productive, renewable, non-food resources.  The advantages of using microalgae instead of traditional oil crops for biofuel production include high oil yields, rapid reproductive rates, and versatile growing requirements.  In order to reduce the cost of producing microalgae based biofuels, wastewater has been used as a nutrient source instead of specialized plant nutrients.  The purpose of this study was to compare the relative effectiveness of different combinations of microalgae strain and dairy wastewater for increasing biomass.  The methods for monitoring growth included optical density, cell counting, biomass …

Development Of An In-Vitro Hyperglycemic Tissue Engineered Blood Vessel Mimic, Brian C. Wong

Biomedical Engineering

No abstract provided.

Study On Weight Loss And Moisture Regain Of Silk Cocoon Shells And Degummed Fibers From African Wild Silkmoths, Addis Teshome, S. K. Raina, F. Vollrath, J. M. Kabaru, J. Onyari, E. K. Nguku

All Peer-Reviewed Publications

A study was conducted to determine weight loss and moisture regain properties of silk cocoon shells, shell layers and degummed fibers of the four African wild silkmoths Anaphe panda, Argema mimosae, Epiphora bauhiniae and Gonometa postica and compare with the industry standard mulberry silkmoth, Bombyx mori. No. significant difference was observed between the moisture regain of the wild silk fibers after degumming. However, there were significant differences in weight loss and moisture regain between cocoon shells as well as shell layers. E. bauhiniae had the lowest weight loss and moisture regain of 23.19 and 5.64%, respectively while G. postica had …

Compressibility Effects Of Extended Formation Flight, Andrew Ning, Ilan Kroo

Faculty Publications

Aircraft flown in formations may realize significant reductions in induced drag by flying in regions of wake upwash. However, most transports fly at transonic speeds and compressibility effects in formation flight are not well understood. This study uses an Euler solver to analyze the inviscid aerodynamic forces and moments of transonic wing/body configurations flying in a 2-aircraft formation. We consider formations with large streamwise separation distances (10-50 wingspans) in an arrangement we term extended formation flight. Compressibility-related drag penalties in formation flight may be eliminated by slowing 2-3% below the nominal out-of-formation drag divergence Mach number, at fixed lift coefficient …

Factors For Improved Fish Passage Waterway Construction, David N. Sillars, Hamid Moradkhani, Nicholas Tymvios, Trevor D. Smith

TREC Final Reports

Streambeds are important fish passageways in Oregon; they provide for the necessary habitats and spawning cycles of a healthy fish population. Oregon state law requires that hydraulic structures located in water properly provide fish passage. Increasingly stringent state and federal regulations apply to these fish passageways, and designers must become more cognizant of conditions over a range of flows to accommodate fish movement and avoid expensive structural failure of these passageways. Fish passage structures are built when roads cross streambeds and may include culverts, or bridges. When these structures are built, the streambeds are re-created using a technique called “roughened …

Effect Of Dry Particle Coating On The Properties Of Cohesive Pharmaceutical Powders, Lauren Elizabeth Beach

Dissertations

Engineered particles, which have undergone surface modification via dry coating, have been previously shown to have improved flow and handling properties. The improvements in these properties can be applied and are very useful for a number of industrial applications, in this case the pharmaceutical industry. This work investigates the effect of dry particle coating to improve the flowability of cohesive active pharmaceutical ingredient (API) powders and their blends. Improving the flow properties of cohesive API powders can significantly improve their handling and subsequent use for pharmaceutical processes such as formulation and manufacturing processing operations. Although it has been shown that …

A 3-Dimensional Vascularized Cardiac Tri-Culture Model Using Chitosan Nanofiber Scaffolds, Ali Hussain

Dissertations

The development of an in vitro tissue model that can mimic the 3-dimenisonal (3-D) cellular architecture and mosaic of myocardial tissue holds great value for cardiac tissue engineering, modeling, and cardiovascular drug screening applications. The main objective of this project was to develop a 3-D vascularized cardiac tissue model in vitro for improved survival and function.

The cellular mosaic of the myocardial tissue demands the intricate integration of an extracellular matrix-like scaffold, cellular constituents, and biological factors. The first aim of the research was to fabricate and characterize a biodegradable chitosan nanofiber scaffold that would resemble the extracellular matrix (ECM) …

Electrodeless Electro Hydrodynamic Printing Of Personalized Drug Dosages, Ezinwa Okeoma Elele

Dissertations

There is compelling evidence that variability in drug efficacy in individuals depends on their genetic fingerprints. These observations have given rise to the concept of personalized therapy whose ultimate goal is to develop medicinal agents designed for each niche of the population and individual patients according to their genetic background. The drawback in current pharmaceutical technologies is that most processes are designed to target large population and are unable to meet the demand of small-scale manufacturing of tailored therapeutics with diverse range of physical properties. One of the major challenges lie in developing efficient and cost effective methods of manufacturing …

Magnetic Seeding Aggregation To Enhance The Removal Efficiency Of Tio2 Nanoparticles From Water, Ashish Dhananjay Borgaonkar

Dissertations

Engineered nanoparticles, such as titanium dioxide (TiO₂), are important building blocks for the evolution of nanotechnology in industries and commercial products. Ever so increasing use of the engineered nanoparticles is bound to result in a substantial fraction of these nanoparticles ending up in wastewater; or surface water and groundwater, which are sources of intake for drinking water treatment. Removal of these engineered nanoparticles in wastewater and drinking water treatment processes is a very important step towards the protection of environmental and public health as well as protecting water treatment units from fouling and other issues.

Experimental studies showed …

Deagglomeration And Mixing Via The Rapid Expansion Of High Pressure And Supercritical Suspensions, Daniel To

Dissertations

Nano-materials are the focus of many research activities due to the desirable properties imparted from their small grain size and high interfacial surface area. However, these materials are highly cohesive powders in the dry state and typically form large agglomerates, leading to a diminished surface area or even grain growth, which minimizes the effectiveness of these nanomaterials. This dissertation addresses the issue of mixing nanopowders constituents by deagglomerating them and achieving simultaneous mixing so that even after inevitable reagglomeration, the effectiveness of large interfacial surface area may be preserved.

Nano-particle mixtures were prepared using the environmentally benign dry mixing methods …