Digital Commons Network^™

Fire Drivers Affecting Forest Fire Occurrences In The Tropical Mixed Broad-Leaved Forests Of Nepal, Krishna Bahadur Bhujel, Rejina Maskey Byanju, Ambika P. Gautam, Ramesh Prasad Sapkota, Udhab Raj Khadka

Applied Environmental Research

Forest fires triggered by various natural and anthropogenic drivers are increasing and threatening forest ecosystems across the globe. In Nepal, the high value Tropical Mixed Broad-leaved Forests are prone to fire caused by both natural and anthropogenic drivers. Thus, understanding fire drivers and their effect is important for the sustainable forest fire management. However, the preceding studies on forest specific fire drivers and their effect are limited. This research has identified the fire drivers and assessed their effect to fire occurrences in the Tropical Mixed Broad-leaved Forests of Nawalparasi District, Nepal. Fire drivers were identified and prioritized by participatory approaches. …

Deployment Of Rfid, Gps And Iot Technology For Medical Specimen Logistic System, Mya Myet Thwe Chit

Chulalongkorn University Theses and Dissertations (Chula ETD)

This paper aims to implement a specimen logistic system using RFID technology combined with modern IoT technology in Chulalongkorn hospital. The specimen is a sample collected from the human body. Samples can be urine, saliva, sputum, feces, semen, and other bodily fluids and tissues. Samples are usually collected from the patient and stored in a test tube. Then test tubes are delivered to the corresponding laboratory for examination. Normally, barcodes are tagged over the test tubes for the purpose of recording patient information. In this work, RFID is deployed on the test tube instead for patient data logging. This solution …

Natural Rubber Films Reinforced With Cellulose And Chitosan Prepared By Latex Aqueous Microdispersion, Naipaporn Sutipanwihan

Chulalongkorn University Theses and Dissertations (Chula ETD)

Plastics are one of the derived products from petroleum material, which have been used in many applications worldwide, because of their various properties. However, plastic wastes create toxic environmental pollutions and problems because of their toxic constituents and non-biodegradability. Accordingly, nature materials have been proposed as a substitute for petroleum materials for bioplastic production. Natural rubber (NR) is a product from natural, which is well-known for its high elasticity. However, there are some drawbacks such as low tensile strength and low abrasion resistance. Moreover, its applications are also limited because of its poor resistance to oil and solvents. Therefore, the …

Hydraulic Assessment Of Traditional And Fish-Friendly Tide Gates In Humboldt Bay, California, Marcela Anne Jimenez

Cal Poly Humboldt theses and projects

Tide gates are common hydraulic structures located throughout coastal and estuarine areas that prevent tidal waves from flooding previously converted tidally influenced areas. As restoration efforts increase, more “fish-friendly” tide gates that allow for larger openings and longer opening periods are being installed to improve habitat for threatened or endangered species. The purpose of this thesis was to determine discharge and head loss coefficients for traditional and side-hinged tide gates that could be inputs for hydraulic models and improve tide gate sizing and design. The study sites included Gannon Slough and US 101 Slough in Humboldt, California that represented a …

Bibliometric Analysis Of Research Trends In Rice Straw/Husk Reinforced Polymer Composites, Deepak D Dr., Abhishek S. Madival, Anupkumar M. Bongale Dr.

Library Philosophy and Practice (e-journal)

Bibliometric research is statistical analysis of publications to identify the most influencing sources of research pertaining to a specific area of research. This paper presents an overview research on rice straw/husk (RS/RH) reinforced polymer composites by using the bibliometric indicators to establish the research framework and to identify the essential research. The relevant journals, authors, institutions and countries which have significantly contributed to research on RS/RH based composite is focused. The bibliometric data is generated through Scopus database. It is observed that the number of publications on characterization of RS/RH based composites are consistently increasing over the last few years …

Hr Process Automation: A Bibliometric Analysis, Shubham Mishra, Monica Kunte, Netra Neelam, Sanjay Bhattacharya, Preeti Mulay

Library Philosophy and Practice (e-journal)

Automation is interpreted as the replacement of manual operations by electronics and computer-controlled systems. Human resource management is an indispensable part of every firm be it the space of retail, healthcare, education or any other sector. Activities such as hiring new workers, training, or making sure that local labour laws are obeyed with HR processes and are a crucial part of every organisation. HR has typically been believed of as an extremely manual department procedure. Employees are accustomed to doing this manually and getting the job done themselves. But everything around the HR processes are changing rapidly. HR Automation is …

Chlorination As Drinking Water Disinfection Technique And Disinfection By Products: A Scientometric Analysis, Sapna Ramchandra Shinde, Sayali D. Apte Dr, Kanchan C. Khare Dr, Philipp Otter Mr

Library Philosophy and Practice (e-journal)

The Sustainable Development Goals (SDG) 2015, defined to achieve a better and more sustainable future, contains goal number 6 related to safe and affordable drinking water facility for all till 2030. The rural and remote areas in the developing countries predominantly face the scarcity of pathogen free drinking water leading to water borne diseases and deaths due to consumption of contaminated water indicating a need of advancement in the drinking water disinfection techniques. The paper discusses scientometric analysis of publication trends in chlorination as a popular disinfection techniques and research related to the Disinfection By Products (DBPs) that are produced …

Bibliometric Review On Inertial Sensors Based Position Estimation Using Sensor Fusion, Animesh Mishra, Hamshita Kancharlapalli, Ankit Kumar, Aditya Chauhan, Parag Narkhede

Library Philosophy and Practice (e-journal)

Background: This paper analyzes the position estimation of UAV in a 3D environment, on the basis of inertial sensors and sensor fusion algorithm, done from the year 1994 to 2020. This paper contains various bibliometric analyses previously done on this topic.

Methods: The content for this topic was taken from the popular Scopus database. The Scopus provides many filters for searching databases with different document categories like document by year, country, etc. The research carried in this paper also includes co-authorship, citation analysis, etc.

Results: A total of 345 articles were obtained from the last 20 years, on the topic …

Bibliometric Review On Liver And Tumour Segmentation Using Deep Learning, Jayant Jagtap, Aamir Habeeb, Avinash Jha, Shrey Aggarwal, Khushi Gupta

Library Philosophy and Practice (e-journal)

One of the major organs in the body is liver where tumors occur often. Malignant liver tumors pose a serious hazard to human life and health. Manual segmentation of the liver organ and tumor from computed tomography (CT) scans is difficult, time-consuming, and skewed to the clinician's experience, yet it is essential for hepatic surgical planning. However, due to the following considerations, segmenting liver tumors from computed tomography (CT) images is difficult: In CT pictures, the contrast between the liver tumor and healthy tissues is low, and the boundary is indistinct; the picture of the liver tumor is confusing, with …

Bibliometric Analysis Of Plant Disease Prediction Using Climatic Condition, Shivali Amit Wagle, Harikrishnan R

Library Philosophy and Practice (e-journal)

The changes in the climatic conditions are having beneficial as well as harmful effects on crop yields depending on the drastic changes. There can be a yield loss due to the occurrence of disease in crops. Apart from severe yield losses, infected yield can be harmful and threatening to living being’s health as that is the source of food. This also affects the economy of the agricultural depended country. Disease prediction tools advance in the management of exertions for diseases in plants. Machine learning techniques help in elucidating complex associations between hosts and pathogens without invoking difficult-to-satisfy expectations. For the …

A Bibliometric Analysis Of Ultrasonic Vibration Assisted Turning, Govind S. Ghule, Sudarshan Sanap Prof. Dr.

Library Philosophy and Practice (e-journal)

Ultrasonic vibration-assisted turning (UVAT) is a new crossover in machining techniques which uses high frequency, low amplitude sound waves which are further superimposed on the cutting tool in traditional turning. This innovative technology is being utilized over the decades due to its conspicuous influence contrasted with traditional approach particularly in turning of hard-to-machine materials. This present paper analyses the past explores in the arena of ultrasonic vibration-assisted turning, by a far-reaching bibliometric investigation. The analysis is carried out by scrutinizing the studies through Science Direct and Scopus database to select the peer-reviewed papers. The advanced research tools like the word …

Bibliometric Review On Image Based Plant Phenotyping, Shrikrishna Ulhas Kolhar, Jayant Jagtap

Library Philosophy and Practice (e-journal)

Plant phenotyping is a quantitative description of structural, physiological and temporal traits of plants resulting from interaction of plant genotypes with the environment. A rapid development is in progress in the field of image-based plant phenotyping. Plant phenotyping has wide range of applications in plant breeding research, plant growth prediction, biotic and abiotic stress analysis, crop management and early disease detection. The main motive is to provide detailed bibliometric review in order to know the available literature and current research trends in the area of plant phenotyping using plant images. The bibliometric analysis is primarily based on Scopus, web of …

Predictive Maintenance Of Bearing Machinery Using Simulation- A Bibliometric Study, Karan Gulati Mr., Keshav Basandrai Mr., Shubham Tiwari Mr., Pooja Kamat Prof., Satish Kumar Dr.

Library Philosophy and Practice (e-journal)

Modelling is a way of constructing a virtual representation of software and hardware that involves a real-world device. We will discover the behaviour of the system if the software elements of this model are guided by mathematical relationships. For testing conditions that may be difficult to replicate with hardware prototypes alone, modelling and simulation are particularly useful, especially in the early phase of the design process when hardware might not be available. Model-based approach in MATLAB-Simulink can be useful for predictive maintenance of machines as it can reduce unplanned downtimes and maintenance costs when industrial equipment breaks. Through this bibliometric …

In Vitro And In Vivo Response To A Novel Borophosphate Bioactive Glass, Nada Abokefa

Masters Theses

"Bioactive glasses have been widely used in several biomedical and tissue engineering applications since the late 1960s. Numerous families of bioactive glasses have emerged over the years, with each having its own advantage and disadvantage. One concern common to all families is that most bioactive glasses create a basic or acidic environment when degraded and, therefore, are toxic for cells. Recently, there has been an increased interest in borophosphate bioactive glass (BPBGs) because of their neutral pH, release of therapeutic ions, and biodegradable properties. Despite the growing interest, there is little reported on the bioactivity of BPBGs. The biological effects …

A Simple Background Elimination Method For Miniaturized Fiber-Optic Raman Probe, Bohong Zhang

Masters Theses

"Raman scattering is called a photonic - molecular interaction based on the kinetic model of the analytic. Due to the uniqueness of the Raman scattering technique, it can provide a unique fingerprint signal for molecular recognition. However, a serious challenge often encountered in Raman measurement comes from the requirements of fast, real-time remote sensing, background fluorescence suppression, and micro-environmental detection.

A new Miniaturized Fiber-Optic Raman Probe (MFORP) for Raman spectroscopy, used especially for eliminating background fluorescence and enhancing sampling, is presented. Its main purpose is to provide an overview of excellent research on the detection of very small substances and …

Bond Graph Modeling Of Critical Infrastructures For Cyber-Physical Security Implementation, Michele Jane White

Masters Theses

“In developed societies, there exists infrastructure vital to everyday life. This includes water and power systems. Technology is quickly evolving and being implemented on these utilities. This technology can range from smart metering in neighborhoods to volume sensors in local waste water treatment facilities. When networking, sensing, monitoring, or control devices are integrated with infrastructure it is considered a cyber physical system, or CPS. When information about an important physical system is connected to the virtual world, it is opened up to security risks. Cyber security can be provided to the CPS by monitoring the physical state of the system …

Simulation Of Flexural Performance Of Mill-Cut Steel Fiber Reinforced Concrete Beam Degraded By Mild Corrosion, Minh Khanh Vo

Chulalongkorn University Theses and Dissertations (Chula ETD)

The reinforced concrete structure is widely used for various applications structure due to its many advantages, so it is easily exposed to severe environments and corrosion of steel occurred shortening the life durable of the structure which may cause danger to humans and economic damage. Corrosion occurred as a significant factor leading to the further deterioration of performance and reduction of the loading resistance of reinforced concrete structures. Therefore, durable corroded structures should be dealt with to ensure user safety. In recent decades, steel fiber reinforced concrete is studied and applied cause of provides better durability. Nevertheless, there is a …

Communities Of Nitrifying Microorganisms From Recirculating Aquaculture Systems (Rass) Under Different Ammonium Concentration And Salinity, Preeyaporn Pornkulwat

Chulalongkorn University Theses and Dissertations (Chula ETD)

Bioaugmentation of nitrifying cultures can accelerate nitrification during startup and transition periods of recirculating aquaculture systems (RASs) operations. To formulate nitrifying cultures for RASs, impacts of ammonia and salinity (NaCl) on culturing nitrifying microorganisms were comprehensively investigated by including currently known groups of nitrifying microorganisms (ammonia-oxidizing archaea (AOA), ammonia oxidizing bacteria (AOB), comammox, Nitrospira, and Nitrobacter). Initially, community structure of nitrifying microorganisms was observed in biofilters from water recirculation units of shrimp holding tanks operated at two different salinities of 2 and 15 g/L. Unique patterns of nitrifying communities consisting of AOA, comammox, and Nitrospira (without AOB and Nitrobacter) were …

Simulation Of The Objective Occlusion Effect Induced By Bone-Conducted Stimulation Using A Three-Dimensional Finite-Element Model Of A Human Head, Huiyang Xu, Franck Sgard, Kévin Carillo, Éric Wagnac, Jacques De Guise

Études primaires

The occlusion effect (OE) refers to the phenomenon that more bone-conducted physiological sounds are transmitted into the earcanal when it is blocked and may cause discomfort on users of hearing protection devices. Models have been proposed to study the OE as they can help understand the physical mechanisms and can be used to evaluate the individual contribution on the OE of the factors that may affect it (i.e., occlusion device, ear anatomy, and stimulation). The existing finite element models developed to study the OE are limited by their truncated ear geometries. In order to progress in the understanding of the …

Treatment Of Cutting Oil Via Fe0/Air And Al0/Air Using Waste From Auto Parts Manufacturing, Warangkana Srimoke

Chulalongkorn University Theses and Dissertations (Chula ETD)

Used shot blast and aluminium dross wastes generated from auto part manufacturing were applied as catalysts under the modified-air Fenton (MAF) system to treat synthetic cutting oil wastewater. Experimental designs were applied to find optimum conditions in terms of size and amount of catalyst, initial pH, initial cutting oil concentration, air flow rate, and mixing speed. Fe0 and Al0 forms were found in used shot blast and aluminum dross, respectively, according to XRD and XRF results, and the element contents of Fe and Al were found to be 96.37 % and 37.13 %, respectively. For used shot blast under the …

Engineering Thermostable Regulators For Inducible Gene Expression In Thermophiles, Connor M. Joyce

Honors Theses and Capstones

Thermophilic bacteria have attracted research interest due to their ability to grow at high temperatures ranging from 45 °C to 75 °C with some extreme thermophiles able to survive nearly boiling temperatures. They are valuable sources of thermostable biocatalysts and many have great potential as industrial hosts for biofuel production because fermentation at high temperatures has advantages such as reduced processing costs and lower risk of contamination compared with mesophilic bacteria. For example, some Geobacillus species has been shown to have high solvent tolerance, making them good candidates as host for alcohol production. To develop them as industrial hosts, large …

Prioritizing Countries By Concern Regarding Access To Weapons Of Mass Destruction Materials, Susan Caskey, Barry Ezell

VMASC Publications

This article presents a global prioritization methodology that evaluates the relative risks of non-state actor acquisition of materials that could be used in chemical, biological, radiological, nuclear and high explosive Weapons of Mass Destruction (WMD) from the country's relevant infrastructure. Prioritization is based on three domains: 1. Assessing relative scale of materials in each country, 2. The country's corresponding security posture, and 3. The presence of threat actors. The output is a list of countries prioritized from greatest risk to least. Rather than providing an overall 1 to N ranking, however, the results are placed into tiers based upon their …

A Blockchain-Enabled Model To Enhance Disaster Aids Network Resilience, Farinaz Sabz Ali Pour, Paul Niculescu-Mizil Gheorghe

Engineering Management & Systems Engineering Faculty Publications

The disaster area is a true dynamic environment. Lack of accurate information from the affected area create several challenges in distributing the supplies. The success of a disaster response network is based on collaboration, coordination, sovereignty, and equality in relief distribution. Therefore, a trust-based dynamic communication system is required to facilitate the interactions, enhance the knowledge for the relief operation, prioritize, and coordinate the goods distribution. One of the promising innovative technologies is blockchain technology which enables transparent, secure, and real-time information exchange and automation through smart contracts in a distributed technological ecosystem. This study aims to analyze the application …

Toward An Interactive, Patient-Specific, Vr-Based Obstetrics Simulator, Michel A. Audette, Marco Parente, Dulce Oliveira, Sreekanth Arikatla, Alfred Abuhamad, Rumit Singh Kakar, Mark Scerbo, Lucia Tabacu, John Conery, Christopher Macgowan, Renato Natal Jorge

Electrical & Computer Engineering Faculty Publications

This paper presents a nascent collaborative effort to achieve a Virtual Reality (VR)-based, real-time, haptics-driven patient-specific obstetrics simulator. The high-level architecture and preliminary results are presented here; the latter are based on offline birthing simulation developed by team in conjunction with open-source visualization tools. The cornerstones of this simulator will be high-fidelity generic offline birthing simulation, an anatomy-to-image nonrigid registration pipeline exploiting fetal MRI, the open-source interactive medical simulation toolkit IMSTK augmented by high-throughput deep learning-based soft tissue deformation, open-source musculoskeletal dynamics simulation platform SimTk for representing fetal motion. The initial emphasis will be on shoulder dystocia. The two main …

Evaluation Of Spinal Anatomy Segmentation Methods Using Synthetic Computed Tomography Volumes, Austin Tapp, Michel Audette

Electrical & Computer Engineering Faculty Publications

Severe adolescent idiopathic scoliosis (AIS) is corrected by surgical procedures that necessitate ligament releases. To determine appropriate release allotments, soft tissues must be localized on a patient-specific basis, However, routine computer tomography (CT) imaging precludes traditional, voxel-based soft tissue localization. Fortunately, recent studies have proposed top-down segmentation methods, which elucidate soft tissues using pre-operative CT volumes. While the accuracy of vertebral segmentations obtained from these methods has not been determined, the accuracy of soft tissue segmentations has not. To ensure the soft tissue segmentation methods are clinically applicable, soft tissue validation must occur. This study presents an evaluation measure for …

Modeling And Simulation Of Electromagnetic Fields To Maintain Bone Density During Prolonged Low Gravity Exposure, Austin Tapp, Michael Francis, Michel A. Audette

Electrical & Computer Engineering Faculty Publications

Astronauts in a long term, low-gravity environments experience bone density loss at 10 times the rate of those diagnosed with osteoporosis. One treatment effective at maintaining bone density in osteoporotic individuals is electromagnetic field (EMF) therapy. Tools that induce EMFs are becoming increasingly prevalent, but to amplify osteogenesis and encourage superior bone density retention for astronauts, ideal EMF therapy parameters must be determined on patient-specific bases. Therefore, this study explores simulation environments that elucidate highly favorable EMF factors. Pulsed electromagnetic field and combined magnetic field generating devices are variably introduced near partient-specific, finite element (FE) models of the femur, spine, …

Deep Neural Network Analysis Of Pathology Images With Integrated Molecular Data For Enhanced Glioma Classification And Grading, Linmin Pei, Karra A. Jones, Zeina A. Shboul, James Y. Chen, Khan M. Iftekharuddin

Electrical & Computer Engineering Faculty Publications

Gliomas are primary brain tumors that originate from glial cells. Classification and grading of these tumors is critical to prognosis and treatment planning. The current criteria for glioma classification in central nervous system (CNS) was introduced by World Health Organization (WHO) in 2016. This criteria for glioma classification requires the integration of histology with genomics. In 2017, the Consortium to Inform Molecular and Practical Approaches to CNS Tumor Taxonomy (cIMPACT-NOW) was established to provide up-to-date recommendations for CNS tumor classification, which in turn the WHO is expected to adopt in its upcoming edition. In this work, we propose a novel …

Low-Temperature Gas Plasma Combined With Antibiotics For The Reduction Of Methicillin-Resistant Staphylococcus Aureus Biofilm Both In Vitro And In Vivo, Li Guo, Lu Yang, Yu Qi, Gulimire Niyazi, Jianbao Zheng, Ruobing Xu, Xusong Chen, Jingye Zhang, Wang Xi, Dingxin Liu, Xiaohua Wang, Hailan Chen, Michael G. Kong

Electrical & Computer Engineering Faculty Publications

Biofilm infections in wounds seriously delay the healing process, and methicillin-resistant Staphylococcus aureus is a major cause of wound infections. In addition to inactivating micro-organisms, low-temperature gas plasma can restore the sensitivity of pathogenic microbes to antibiotics. However, the combined treatment has not been applied to infectious diseases. In this study, low-temperature gas plasma treatment promoted the effects of different antibiotics on the reduction of S. aureus biofilms in vitro. Low-temperature gas plasma combined with rifampicin also effectively reduced the S. aureus cells in biofilms in the murine wound infection model. The blood and histochemical analysis demonstrated the biosafety of …

Joint Modeling Of Rnaseq And Radiomics Data For Glioma Molecular Characterization And Prediction, Zeina A. Shboul, Norou Diawara, Arastoo Vossough, James Y. Chen, Khan M. Iftekharuddin

Electrical & Computer Engineering Faculty Publications

RNA sequencing (RNAseq) is a recent technology that profiles gene expression by measuring the relative frequency of the RNAseq reads. RNAseq read counts data is increasingly used in oncologic care and while radiology features (radiomics) have also been gaining utility in radiology practice such as disease diagnosis, monitoring, and treatment planning. However, contemporary literature lacks appropriate RNA-radiomics (henceforth, radiogenomics) joint modeling where RNAseq distribution is adaptive and also preserves the nature of RNAseq read counts data for glioma grading and prediction. The Negative Binomial (NB) distribution may be useful to model RNAseq read counts data that addresses potential shortcomings. …

Rapid Quantification Of Biofouling With An Inexpensive, Underwater Camera And Image Analysis, Matthew R. First, Scott C. Riley, Kazi Aminul Islam, Victoria Hill, Jiang Li, Richard C. Zimmerman, Lisa A. Drake

Electrical & Computer Engineering Faculty Publications

To reduce the transport of potentially invasive species on ships' submerged surfaces, rapid-and accurate-estimates of biofouling are needed so shipowners and regulators can effectively assess and manage biofouling. This pilot study developed a model approach for that task. First, photographic images were collected in situ with a submersible, inexpensive pocket camera. These images were used to develop image processing algorithms and train machine learning models to classify images containing natural assemblages of fouling organisms. All of the algorithms and models were implemented in a widely available software package (MATLAB^©). Initially, an unsupervised clustering model was used, and three …