Digital Commons Network^™

Design And Analysis Of A Customizable 6-Dof Force/Torque Sensor, Pyeongkang Kim

Master's Theses

This thesis presents the design, development, calibration, and testing of a novel customizable six-degree-of-freedom force/torque sensor, called the Kustom Force/Torque Sensor (KFTS), for use in the Cal Poly Low Speed Wind Tunnel (LSWT). The KFTS was developed as an alternative to commercial multi-axis force/torque sensors that feature fixed specifications. The swappable components and configurable structure of the KFTS enables changes to the sensor sensitivity, sensing range, and frequency response. Experimental testing verified that the sensor behaved as a linear time-invariant system, enabling calibration through the method of least squares and allowing the applied forces and moments to be reconstructed as …

Praxsmith: An Actor-Centric Domain Specific Language For Emergent Narratives In Video Games, Jacob C. Kelleran

Master's Theses

The video game industry is rapidly growing, and interest in game development is growing alongside it. Among this growing interest is a desire to include branching and emergent narratives in games. This subject is understood to be difficult, as every possible trajectory within the story creates exponential complexity. Large studios are sometimes able to create convincing implementations, but that is often with hundreds of developers and writers. Over the years, various solutions have been proposed to create frameworks and languages that aim to tackle this problem, with varying degrees of success. Some frameworks attempt this by placing the focus on …

Research And Assessment Of Needs For Sign And Signal Maintenance, Megan White, Eric Green

Kentucky Transportation Center Research Report

Kentucky Transportation Cabinet (KYTC) sign and signal crews have expressed multiple concerns related to compensation, expertise, and having the financial and personnel resources needed to help the agency comply with Manual on Uniform Traffic Control Devices (MUTCD) guidelines while continuing to perform routine job duties. Internal reorganizations and personnel changes have reduced staffing and budgets available to underwrite the activities of sign and signal crews even as workloads have remained steady or increased. To document the challenges facing sign and signal crews and associated engineering staff, Kentucky Transportation Center (KTC) researchers administered a statewide survey. Respondents gave their perspectives on …

Kytc Crash Modification Factor Recommendation List Online Tool, William Staats, Reginald Souleyrette, Teng Alex Wang, Mohammad Zana Majidi

Kentucky Transportation Center Research Report

Transportation practitioners use crash modification factors/functions (CMFs) to calculate the number of crashes expected once a countermeasure has been implemented. When evaluating design alternatives, CMFs can be used in conjunction with safety performance functions (SPFs) to derive crash predictions. The Federal Highway Administration (FHWA) maintains the CMF Clearinghouse as a repository for CMFs. Contributions are submitted by researchers across the U.S., Canada, and throughout the world. Typically, individual countermeasures are associated with multiple CMFs. Some CMFs only apply to a specific facility or crash types. CMF quality varies, and some only apply to a specific facility and/or crash types, regions, …

Rehab Mechanics, Sierra Spierling, Nicole Garcia, Joel Gonzalez, Diana Garcia-Becerra, Mia Kwan

Mechanical Engineering Senior Theses

Stroke survivors often struggle to regain grip strength and hand mobility due to limited access to physical therapy, lack of progress tracking during independent rehabilitation sessions, and reduced motivation from slow or unmeasured progress. There is a need for more effective rehabilitation approaches, as current at-home strengthening tools do not provide quantitative feedback or adjustable resistance, and clinical devices are expensive. This makes it challenging for patients and their physical therapists to guide recovery and monitor improvement effectively. To address these obstacles, we developed a low-cost, customizable grip-strengthening device that tracks patient progress and assists in regaining strength and mobility …

Collagen Gene Expression Is Linked To Aging And Lifespan Extension In C. Elegans, Archer J. Wang, Blake M. Geppert, Daniel Beck, Yanqing Ji, Yiyong Liu

Electrical & Computer Engineering Faculty Scholarship

Collagens, long regarded as structural molecules, also regulate stress responses and longevity. In this study, we analyzed our RNA sequencing data and publicly available gene expression data to define their role in Caenorhabditis elegans aging. Collagen expression broadly declined with age, with 16 collagen genes consistently downregulated across independent studies, establishing collagen downregulation as a genetic hallmark of aging. In contrast, meta-analysis of 66 datasets (128 comparisons between normal and long-lived animals) showed collagen upregulation in 84% of long-lived conditions, identifying collagen induction as a conserved signature of lifespan extension. Using π-values to integrate fold change and significance of …

Effect Of Allocation And Allocation Avoidance Methods On Life-Cycle Impact Results For Tellurium Production From Copper Anode Slimes, Ioanna Paschalidou, Kwame Awuah-Offei, Michael Moats

Mining Engineering Faculty Research & Creative Works

The global transition toward green energy has increased demand for metals and intensified the need for sustainable supply sources. Tellurium (Te), an essential metal for photovoltaics technology, is produced primarily as a by-product of copper refinery slimes treatment. This study conducts a life-cycle assessment (LCA) study of Te production to investigate the effect of environmental impact allocation choices on LCA results in multi-product metal systems. A cradle-to-gate LCA model of the Te product system was developed in SimaPro v9.5.0.1 software by combining industrial data, Ecoinvent v3.7.1 datasets, and literature information. Environmental impacts were quantified using the ReCiPe v1.04 Midpoint method …

Western Kentucky University Stormwater Utility Survey 2026, Warren Campbell

SEAS Faculty Publications

In the U.S., more than 2200 stormwater utilities have been enacted. This year, we have expanded the survey to include stormwater utilities in other countries. Many of these stormwater assessments are called taxes, but if the assessment is recurring, is not an ad valorem tax, and is dedicated to stormwater purposes, we call it a stormwater utility. With the help of ChatGPT we have been able to identify 25 stormwater fees in Australia. We were also able to identify 3 in New Zealand, and some in Europe as well.

Matlab Shake Table Control And Data Acquisition System, Abigail Austin

Architectural Engineering

The College of Architecture and Environmental Design’s (CAED) seismic laboratory shake table is used for earthquake engineering education and experimental testing. However, the existing control system is outdated and difficult for students unfamiliar with the system to operate. The objective of this project was to develop a MATLAB-based control and data acquisition application to simplify shake table operation and improve accessibility, of both operation and output, for student users.

The developed application imports earthquake acceleration records, scales the input motions to the operational limits of the shake table, and executes the desires motion through the existing hardware system. Experimental data …

Electrically Evoked Emg Decomposition Using The Perturbative Generalized Series Expansion, William R. Walker

Master's Theses

Electrically evoked electromyography records the muscle's response to nerve stimulation and has been used for clinical assessment of neuromuscular function, as well as treatments such as functional electrical stimulation or stroke rehabilitation. In every muscular contraction, an electrical signal is generated. These signals come from the summation of simultaneously recruited motor units, enabling decomposition techniques to reveal information about motor unit recruitment.  By improving the ability to decompose and analyze these signals, clinical treatments involving neuromuscular electrical stimulation can be optimized and better understood. Much of the research on EMG analysis focuses on voluntary EMG, leaving a gap in the …

Vision-Guided Motion Planning For Autonomous Catch With A Robotic Arm, Kayla Go-Oco, Ashik K. Islam, Raegan Gritzmacher

Electrical Engineering

Modern robotic systems are often evaluated using static and highly controlled tasks, such as pick-and-place demonstrations, which do not fully represent the uncertainty and adaptability required in real-world environments. A major challenge in robotics research is enabling robotic systems to perceive, track, and respond to dynamic objects in real time while maintaining accurate and reliable motion control. This project addresses these challenges by developing an autonomous robotic platform in which an OpenMANIPULATOR-Y robotic arm detects, tracks, and attempts to catch a moving tennis ball using a vision-guided control system. The system integrates YOLO-based object detection with an Intel RealSense D455 …

Teaching Learning Newsletter Vol 6 Issue 1, Sastra Deemed To Be University

TLC Newsletter

No abstract provided.

Robotic-Assisted Pedicle Screw Placement Achieves High Accuracy And Narrows The Experience Gap: A Preclinical Evaluation, Anna T. Reza, Matthias Walper, Mitchell K. Ng, Paul G. Mastrokostas, Andrew S. Lee, Rafael G. Rafael, Kornelis A. Poelstra, Ratliff K. John, Rajiv K. Sethi, Michael A. Mont

Rothman Institute Papers

To assess a robotic-assisted system versus open manual techniques to: (1) compare pedicle screw accuracy between fellows and attendings with and without robotic assistance, and (2) evaluate executed versus planned trajectory fidelity relative to prior reports. Robotic-assisted spine systems aim to improve the accuracy, reproducibility, and safety of pedicle screw placement. Limited evidence compares outcomes across differing surgeon experience levels. A total of 255 thoracolumbar pedicle screws were placed in synthetic torsos simulating adult degenerative anatomy. Four surgeons (two fellows, two attendings) each placed half their screws using open fluoroscopy-guided techniques and half using a minimally invasive percutaneous approach with …

Project Strata, Hobbs Hegedus, Antony Chen, Adrian Scancich, Peter Constantine Psefteas, Ryan Kreis Roth, Jack Douglas Mitchell

Mechanical Engineering

Project STRATA is a lunar sample acquisition and storage system developed in support of NASA’s Artemis mission objectives and the 2026 NASA RASC-AL competition. The overall mission concept utilizes a dual-rover architecture consisting of HARVEST, a sample collection rover, and SILO, a storage rover designed to preserve and organize lunar ice-regolith core samples collected from permanently shadowed regions (PSRs) near the lunar south pole. These regions contain scientifically valuable volatile-rich materials but present significant challenges due to extreme cryogenic temperatures, abrasive lunar regolith, and the absence of solar energy.

This report is a collection of all major work from the …

Custom Animatronic Puppet, Jake Schuman, Fredy Herrarte, Madison Reedy, Jackson Reynolds

Mechanical Engineering

This project involved the design, fabrication, and implementation of a custom audio-animatronic puppet modeled after Dr. Brian Davis for the California Polytechnic State University Mechanical Engineering Department. The objective was to create an expressive, lifelike character capable of synchronized speech, head movement, arm gestures, and seated-to-standing motion while demonstrating the integration of mechanical design, controls, manufacturing, and artistic fabrication.

The final system consists of an 18-degree-of-freedom animatronic platform utilizing servo-driven facial and upper-body actuation combined with a pneumatic standing mechanism. A modular aluminum and 3D-printed structural framework was developed using SolidWorks and validated through engineering analysis. Character shells were digitally …

Mass - Modular Acoustic Suppression System, Julia Megargle, Michael A. Milner, Lucas Kaemmererer, Jonathan Corvera, Gabriel Choi, Emmi Cayer

Mechanical Engineering

The Modular Acoustic Suppression System (MASS) is a mass tuned damper that reverberates a membrane atop a cavity to absorb select acoustic frequencies produced by the Environmental Control and Life Support Systems (ECLSS) within NASA's Artemis Human Lander. The height of the reverberation chamber is adjusted to mitigate a range of varying tonal frequencies within the human lander.

Guitar Pickup Testing Fixture, Koen Graue, Ethan Rezentes, Max Schecter, Timothy Webb

Mechanical Engineering

Small guitar pickup manufacturers and hobbyists have an interest in developing guitar pickups with unique tonal characteristics and responses, but currently lack a reliable way to test these pickups and characterize their sound. I.M. Bohannon Mechanical Design approached the team to develop a solution to this problem. In response, the team researched current technologies, customer needs, and existing products on the market to define the scope and requirements for a guitar pickup testing fixture. This report documents the work completed during the project scope and definition phase of Cal Poly's senior project process. It discusses researched topics and existing solutions, …

Pet Mobility Project, John Shelby, Lily-Rose Jolie Bacon, Andrea Yasmine Reyes

Biomedical Engineering

The Pet Mobility Project, sponsored by Terri Smith and Jasper Jackson, is an initiative aimed at providing a custom mobility aid to a pet in the San Luis Obispo community. Amber Rappozo’s young German Shepherd, LeDoux, was selected as the project’s recipient. LeDoux suffers from hindleg weakness and, as a result, has limited mobility. This document provides a comprehensive overview of the Pet Mobility Project, detailing the motivation, background, and design approach behind the development of a LeDoux’s custom mobility aid.

Cardiac Twitch Force Measurement System, Tara Hoffman, Sebastian Carrascal Gómez, Julian Macdonald

Biomedical Engineering

The goal of this project is to develop a low-cost and accurate force measurement system and method of measurement to be used in the testing of grown cardiac tissue samples. The primary stakeholder in this project is Dr. Luke Perreault, a biomedical engineering professor at California Polytechnic State University San Luis Obispo who is studying grown cardiac tissue rings, and any of his student lab personnel. Other stakeholders include other researchers in the tissue engineering field who require a similar form of testing to the methods developed in this project.

This document will introduce the identified problem and background as …

Autonomous Vision-Based Litter Collection Rover, Dante Michael Benedetti, Benjamin Scott Tavares, Nathan Heil

Electrical Engineering

This report documents the design, implementation, and testing of an autonomous litter-collection rover developed as a Senior Project Design Lab (EE 460/463/464) at California Polytechnic State University. The rover integrates autonomy, computer vision, embedded real-time control, mecanum-wheel omnidirectional mobility, and a two-degree-of-freedom robotic arm to detect, approach, and collect small ground-level litter such as bottles, wrappers, and paper fragments.

The system uses a two-layer compute architecture: an NVIDIA Jetson Orin Nano running ROS 2 for perception, SLAM, and path planning, paired with an STM32L4A6ZG microcontroller for real-time motor control and odometry. The robot is built on a multi-level aluminum frame …

Pcb Design For Place Cells Vlsi Chip, Gavin Reaksecker, Alex Krier, Joshua Lin

Electrical Engineering

This project presents the design and implementation of a 2 layer test-bench printed circuit board (PCB) for evaluating the functionality of a custom 40-pin VLSI integrated circuit. The objective is to create a reliable and portable platform capable of supplying configurable bias voltages, generating variable input signals, and monitoring both analog and digital outputs. The board integrates adjustable bias networks using potentiometers, digital and analog buffering stages, and optional battery supply operation. The VLSI device under test is mounted in dual-in-line (DIP) sockets to enable rapid replacement and repeated characterization. Dedicated test points are incorporated throughout the PCB to facilitate …

Solving Linearly Constrained Quadratic Programs Using Field Programmable Analog Arrays, Tyler Wynn, Alonzo Arroyo

Electrical Engineering

This paper presents a field-programmable analog array (FPAA) implementation for solving linearly constrained quadratic programs (LCQPs) directly in the analog domain. The solver is based on a continuous-time primal-dual control architecture with integral action, anti-windup compensation, and a piecewise-linear nonlinearity for enforcing affine inequality constraints. A switched-capacitor implementation using three AN231E04 FPAAs is developed, and coefficient scaling methods are introduced to keep internal and output signals within the voltage limits of the hardware. A global scaling factor is used to reduce internal signal excursions, while solution-space scaling is shown to modify the implemented optimization coefficients and alter the local closed-loop …

Inductive Train Transport System, Nicholas Root, Devon Gibb, Ryan Cinarkaya, Davis Letsinger

Mechanical Engineering Senior Theses

Light rail systems can move large numbers of people at relatively high speeds as part of the transit networks critical to dense urban centers, lowering greenhouse gas emissions. However, costs associated with traditional light rail systems are incredibly high and hinder the implementation and expansion of such systems. In this paper, we detail the potential implementation of an inductively-charged, battery-powered light rail system with the potential to lower implementation and expansion costs. This system is compared to existing public transit networks and details of the subsystems required for the successful operation of the planned light rail system are established. As …

Camless Valve Engine, Berkeley Burbank, James Thomas Daniel, Haydn Fischer, Nicos Katigbak, John Holden Kleiner, Martin Raabe

Mechanical Engineering Senior Theses

This project focuses on the design and validation of a camless engine valve system as an  alternative to traditional camshaft-based valvetrain architectures. Conventional engines rely on  fixed camshaft profiles that limit performance and efficiency across varying operating  conditions. The goal of this work is to replace both the camshaft and throttle body with a  pneumatically actuated system capable of independently controlling valve timing, lift, and  duration in real time. By removing the mechanical constraints of a camshaft, the system has the  potential to optimize engine operation across all RPM ranges, improving efficiency and overall  performance without requiring major changes to …

Semi-Automated Wine Barrel Filler, Elliot Jason Dejong, Carlo Caesare Deianni, Brady Emerson J. Leib

Mechanical Engineering

The proposed project is a semi-automated wine barrel filler. Currently, there is no streamlined and affordable method for smaller wineries to fill wine barrels without dedicating complete focus to the task. The primary use is controlled filling for white wine fermentation, during which an air gap must be left in the barrel to allow for expansion of the wine during fermentation. Tom Greenough, Saucelito Canyon’s head winemaker, and associate winemaker Bodie Ringhofer are the primary stakeholders in our project and want to consistently fill barrels at their winery to a fluid volume of approximately 50 gallons each. This project serves …

25-26 Mecc: Magnetic Thread Wave Energy Converter, Adolfo Torres Flores, Maya Malay, Grayson Houghton, Chase Eavis, Ramyasree Kaja, Tyler Chin, Malia Merager, Chad Haines, Noah Borkum, Raina Moore

Mechanical Engineering

Remote coastal Alaskan villages face significant challenges accessing reliable and affordable electricity due to their geographic isolation and limited connection to central energy grids. These communities often depend on expensive and environmentally unsustainable diesel generators which are difficult to supply and operate. They require a new renewable, affordable, minimal maintenance power solution to decrease their reliance on fossil fuels and promote sustainable development in the region. Although several wave energy converters exist, none adequately suit the needs of these coastal villages, therefore a new design is required to support them. This project will be undertaken by three interdisciplinary teams made …

Smart Sleeve, Evan Abalos, Bright Jung, Owen Bowling, Wyatt Eberhart

Mechanical Engineering

Quantifying human arm muscle activity is essential for understanding human movements and helping individuals who suffer from motor or neurological impairments such as stroke or traumatic brain injuries. Today, these individuals, as well as clinicians, researchers, and athletes, face many challenges when using the traditional surface electromyography (sEMG) systems to monitor muscle activities, including complex setup, restricted mobility, discomfort, inconsistent placement of electrodes, and lack of accuracy. Therefore, a comfortable EMG sleeve device that accurately measures arm movement without interfering with daily tasks is needed, which the team will be designing, manufacturing, and testing as their senior project. In addition, …

Mobile Transfer Assist (Mta) Device, Ashley Homuth, Garrett Schnack, Will Bruner, Jacob Flores

Mechanical Engineering

The Mobile Transfer Assist (MTA) device was developed to assist caregivers with seated-to-seated transfers while reducing physical strain. The device uses a manually operated hand winch and pulley system to raise a user into a semi-standing position, allowing safe transfer between locations. The final design emphasizes portability, affordability, ease of use, and user safety through a modular frame, transfer sling, knee supports, and locking caster wheels. A verification prototype was fabricated and tested, demonstrating successful operation and compliance with project requirements established by VTC Santa Maria.

Hydropower Collegiate Competition 2026, Andres R. Arreola, Sammy D. Taporco, Kathryn E. Tinney, Ahmer S. Dhillon

Mechanical Engineering

The Hydropower Collegiate Competition (HCC) is sponsored by the Department of Energy’s (DOE) Water Power Technologies Office (WPTO) and is meant to offer university students an opportunity to solve complex hydropower challenges, build industry connections, explore career connections, and obtain a greater knowledge of hydropower’s potential in the United States. For this year’s competition, our team investigated a potential in-conduit hydropower site in California. Our work included creating a design package for a crossflow turbine related to our selected site and completing the community connections challenge. We also completed a siting and design report, community connections report, design and siting …

Teaching Multi-Core Architecture: Design And Implementation Of A Cache-Coherent Cpu For Undergraduate Education, Isaac R. Lake

Master's Theses

Modern computing has relied on multicore processors for high performance for nearly two decades, yet undergraduate computer engineering curricula often provide limited exposure to parallel hardware architectures and their design challenges. This thesis presents the design of CPE 433, a course that extends the pipelined and cached OTTER CPU developed in CPE 233 and CPE 333 into a multicore processor capable of running parallel workloads. The thesis documents the architectural changes required to adapt the verified single-core design into a multicore system, including MMIO-based interrupt support, a shared cache hierarchy with cache-coherence mechanisms, and clock-gated modules. It further presents a …