Digital Commons Network^™

Temporal Patterns Of Storm Surges: Event-Identification, Clustering, And Count Modeling, Ariadna Martin Oliva

Graduate Studies Theses and Dissertations 2026

Coastal regions face compounding risks when extreme events strike in rapid succession, yet most statistical frameworks treat such events as independent, a simplification that can critically underestimate hazard. This thesis addresses that gap through three interconnected contributions focused on the temporal clustering of storm surges at the global scale. A new automated method is developed to extract independent storm surge events from continuous tide gauge records. By leveraging event correlations and a soft-margin approach that accounts for local variability, the method identifies characteristic event durations across 1,485 global tide gauge stations, revealing the influence of both local site conditions and …

Enhanced Hydrophilicity And Self-Cleaning Properties Of Tio₂ Thin Films On Glass For Photovoltaic Applications: Influence Of Precursor Concentration And Light Irradiation, Fatma Refaat, Hany Hashem, Mohamed Mahmoud Gouda, Ibrahim Ahmed, Khaled Abdelwahed, Ahmed Bakr El Basaty

Trends in advanced sciences and technology

This study investigates the modification of glass substrates with TiO₂ thin films to enhance surface hydrophilicity and self-cleaning behavior. The films were deposited on glass by spin coating using different precursor concentrations, followed by thermal treatment. Structural and optical properties were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and UV–Vis spectroscopy, while surface wettability was evaluated through water contact angle measurements. XRD confirmed the formation of pure anatase TiO₂, while FTIR spectra verified the presence of Ti–O and Ti–O–Ti bonds. Wettability analysis showed that films prepared with the lowest precursor concentration exhibited the …

Advancing Cns Tumor Management: Novel Modalities In Surgery, Radiation, And Chemotherapy, Armin David Tavakkoli

Dartmouth College Ph.D Dissertations

Most tumors affecting the brain and spine are managed through a combination of surgical resection, radiation, and chemotherapy; however, operative morbidity from invasive surgery, the narrow therapeutic window of conventional radiotherapy, and poor blood-brain barrier penetration of systemic agents are critical barriers that hinder long term tumor control. This thesis presents three complementary strategies to advance brain and spine tumor therapy. First, we investigate laser interstitial thermal therapy (LITT) in the treatment of spinal tumors with metastatic epidural spinal cord compression, replacing “separation surgery” with a minimally invasive, image-guided approach that maximizes tumor ablation while preserving neurologic function. Second, we …

The Impact Of Surveying, Nicholas A. Cosper

Williams Honors College, Honors Research Projects

My project consists of three parts. The first part will be helping the public. To do this I will be helping the Boy Scouts earn their surveying merit badge. This badge is known to be one of the hardest for scouts to obtain. In the next part of my project, I will be running a 3-wire level on the Davey Tree Seed Campus. This project will be extremely useful to them (the rest of this information is confidential). In the final part of my project, I will be conducting a topographical survey for the Cuyahoga Valley National Park for a …

High-Speed Non-Pneumatic Tire (Npt) Design For Speeds Above 60 Mph, Jacob Grams, Brady Maurer, Jake Groewa

Williams Honors College, Honors Research Projects

This project focuses on developing a high-speed non-pneumatic tire (NPT) capable of safely operating at speeds greater than 60 mph, a performance range where most existing airless tire designs fail due to structural instability and performance limitations. The objective of this work is to design, analyze, and prototype a structurally optimized honeycomb-based tire structure with improved load distribution, deformation control, and durability. Multiple geometries were evaluated using finite element analysis (FEA) to assess stress and maximum resultant (total) displacement behavior under loading conditions, and a material selection study was performed to identify a suitable material for the design. The final …

Dashboard And Racing Telemetry, Cole Barach, Jacob Koshel, Ethan Zifzal, Matthew Sullivan

Williams Honors College, Honors Research Projects

The main goal of the project is to design and manufacture a combined dashboard and data logger for the vehicles produced by the Zips Racing design team. The dashboard will intuitively display real-time information to the driver and record all received information while driving. This information may be pulled off the device later for performing data analysis. This project will incorporate custom PCB design, surface mount soldering, embedded software development, and the CAN communication protocol.

Computer-Aided Molecular Design To Identify More Environmentally Friendly Pfas, Melvin M. Keita

Williams Honors College, Honors Research Projects

The goal of this project is to inversely design alternatives to per- and polyfluoroalkyl substances (PFAS) using Computer-Aided Molecular Design (CAMD). PFAS, also described as “forever chemicals”, have been used in industry and consumer products since the 1940s. PFAS can be found in drinking water, food, food packaging, waste sites, and other sources. Exposure to different PFAS can lead to increased risks of some cancers, immune effects, and reproductive effects. Pulling from existing data, this project will use quantitative structure-property relationships (QSPRs) to design PFAS alternatives that possess optimal properties to prevent adsorption into drinking water and other potential sources …

Seat Belt Data Collection Methods: A Comparison Between States And National Guidelines, Madison R A Richards

Williams Honors College, Honors Research Projects

Thousands of fatalities related to vehicle crashes occur every year. One method to reduce fatalities is to encourage seat belt use compliance. To promote statistics regarding seat belt use, there first must be reliable data on seat belt compliance and this comes from good survey design.

This report is a comparative analysis of seat belt data collection methodologies for Ohio, Michigan, and Indiana, in addition to an evaluation of how each state aligns with standards set by the National Highway Traffic Safety Administration (NHTSA). The framework for this analysis focuses on NHTSA’s five core survey design requirements: selection of observation …

Secure Peer-To-Peer Messaging Using Distributed Servers, Jack Stoller

Williams Honors College, Honors Research Projects

Traditional messaging systems that rely on centralized infrastructure often introduce three security vulnerabilities: single points of failure susceptible to availability attacks, metadata leakage, and man-in-the-middle attacks.

This project designs, implements, and validates a distributed peer-to-peer messaging system that addresses each of these concerns through architectural design. A consistent hash ring is used with virtual nodes to distribute user data across a mesh of connected nodes, eliminating centralized dependency on any single server. Message contents travel directly between browser clients over a WebRTC data channel secured with end-to-end DTLS encryption, bypassing the server infrastructure. Inter-node communication is protected by mutual TLS …

Automated Pill Dispenser, Ryan Oderkirk, Connor Beaven, Rachelle Labrie, Josue Panchana

Williams Honors College, Honors Research Projects

The project we propose is an automated system for dispensing dosages of medication throughout the day. It will be able to alert a user when their pills need to be taken and give them the correct dosages of up to four different medications. These dosages are configurable as well as the scheduled time they are to be taken. In addition, the pill dispenser will alert users when they are low on medications and need to refill the machine.

Development Of An Atmospheric Particle Imaging System (Apis), James W. Hebert

University of Kentucky Master's Theses

The study of atmospheric particulates plays a crucial role in both climate change studies and the improvement of hypersonic travel. The current issue at hand is a lack of knowledge of stratospheric particulate content and the high cost that is associated with conducting research at these altitudes. This project focuses on the development of an Atmospheric Particle Imaging System (APIS) to be a low-weight, low-cost optical payload. The goal is to make a device that can be mounted onto an uncrewed aerial system that has the capability of imaging particulates moving at steady flow velocities, and thereby characterize the individual …

Analysis Of Policies And Incentives For The Successful Implementation Of Hydrogen-Fueled Medium-Duty And Heavy-Duty Vehicles In Humboldt County, California, Alka Verma

Cal Poly Humboldt theses and projects

The 21st century has seen a significant rise in global greenhouse gas (GHG) emissions, with the transportation sector contributing 23% of these emissions. Medium-duty and heavy-duty vehicles (MD/HD) are particularly impactful, accounting for over a quarter of transport-related emissions. In Humboldt County, California, transportation represents 53% of total emissions, with MD/HD vehicles being a major contributor. As light-duty vehicles shift to zero-emission alternatives, the MD/HD sector faces unique challenges. Hydrogen fuel cell vehicles offer a promising solution, providing longer range, higher energy density, and quicker refueling compared to battery electric vehicles (BEVs). These features make hydrogen an attractive option for …

Managing Green And Sustainable Construction Projects: A Computational Analysis Of Associated Risks And Challenges For Improved Performance, Bahaa Chammout, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Green and sustainable building practices have emerged as effective strategies to address the environmental challenges posed by the construction industry. This includes unsustainable resource utilization, excessive waste production, greenhouse gas emissions, and high energy consumption. However, the integration of green and sustainable initiatives in construction introduces distinct risks and challenges that affect project management and may lead to claims and disputes. To this end, and while previous research examined dispute causation across various aspects of the construction industry, there is limited investigation of the unique and complex nature of risks and challenges - and consequently conflicts, claims, and disputes - …

Managing And Accelerating The Circular Economy Transitions Within The Construction Value Chain Using Network Governance And Game Theory Systems Perspectives, Radwa Eissa, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The fragmented nature of the construction industry has hindered its transition toward circular economy (CE) practices. While game theory (GT) has been successfully applied to support the strategic decisions of CE transitions in other sectors, CE-GT models in the construction domain remain extremely limited. This paper addresses two research questions: (1) how are CE network governance activities currently modeled using GT across domains? (2) How can such models be transferred and adapted to solve strategic interactions within the construction value chain in a manner that enables CE practices to emerge as equilibrium outcomes? These questions are driven by the need …

Biaxial Bending Response Of Prestressed Concrete Girders Subjected To Accidental Asymmetric Prestressing Strand Loss, Haitham Abdelmalek, Mohanad Abdulazeez, Ahmed Ibrahim, Mohamed Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Bridge prestressed concrete girders are vulnerable to sudden rupture of prestressing strands caused by accidental collisions with over-height trucks. These incidents often result in the asymmetric loss of prestressing strands and concrete sections, generating a biaxial bending moment caused by the combined effects of lateral bending and existing service loads. The induced lateral bending moment reduces the flexural resistance of prestressed concrete (PC) girders. However, the current AASHTO LRFD (load and resistance factor design) provisions for flexural resistance in PC members do not explicitly address the complexities introduced by biaxial bending, leaving the extent of strength reduction uncertain. This paper …

Multi-User Collaboration In Augmented Reality For Beyond-Visual-Line-Of-Sight Bridge Inspection, Joel Murithi Runji, Genda Chen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Bridge inspection traditionally relies on scaffolds, snooper trucks, and aerial robots for hard-to-reach areas beyond the visual line of sight of inspectors. This study automates the collaborative inspection workflow for multiple users when inspecting hard-to-reach bridge sections by interfacing low-cost multimodal sensors mounted on a magnetically wheeled climbing robot with augmented reality devices in a cyber-physical system. Non-destructive and visual sensors provide near real-time information of automated steel thickness measurements and visual observations of corrosive regions, respectively. The visual sensors also support robot teleoperation. The cyber-physical system is evaluated for its user-friendliness and performance. The system performance is quantified by …

A Transdisciplinary Approach To Advancing Water Security And Public Health: The “Nurse + Engineer” Model For Achieving Sustainability In Wash Systems Using Community-Based Participatory Research, Daniel B. Oerther, Sarah Oerther

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Human health is linked to the health of the environment, a concept referred to as planetary health. As environmental challenges become increasingly complex, single-disciplinary approaches are insufficient to achieve sustainable solutions. This article presents a transdisciplinary framework, termed the "Nurse + Engineer" model, as a novel methodology for addressing complex problems at the nexus of environmental engineering and public health. The model integrates the technical design and systems-level thinking of environmental engineering with the community-based, patient-centered care of nursing. This work details the key lessons learned from the retrospective application of this framework to a series of multi-year, community-based participatory …

Evaluation And Design Of A Footing Hybrid Connection For Innovative Hollow-Core Fiber-Reinforced Polymer–Concrete–Steel Composite Columns, Mohanad M. Abdulazeez, Mohamed A. Elgawady

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

To support the advancement of accelerated bridge construction in high-seismic regions, this study investigates a novel prefabricated column-to-footing connection designed for improved resiliency, constructability, and cost efficiency. The socket connection utilizes hollow-core fiber-reinforced polymer–concrete–steel (HC-FCS) columns with embedded corrugated steel pipes (CSPs). The composite HC-FCS column consists of a concrete shell sandwiched between an outer fiber-reinforced polymer tube and an inner steel tube. The inner steel tube is embedded into the footing connection of the HC-FCS column. The same authors tested the innovative socket connection on a large HC-FCS column under seismic loads, showing high ductility, strong moment and drift …

Exploring Aggregate Morphological Characteristics Under Laboratory Polishing For Enhanced Pavement Skid Resistance, Ahmed S. El-Ashwah, Magdy Abdelrahman

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

As the use of recycled asphalt pavement (RAP) in pavement construction grows for sustainable development, it becomes essential to investigate potential frictional deterioration over time. This study evaluated the friction properties of recovered RAP material aggregates compared with raw aggregates across various polishing cycles. The micro-Deval test was employed to simulate aggregate loss of texture, while morphological and friction properties were measured using an aggregate imaging measurement system (AIMS-II), along with a British pendulum tester (BPT) and dynamic friction tester (DFT). Additionally, Fourier transform infrared spectroscopy (FTIR) was employed to assess its potential in determining the origin and composition of …

A Four-Step Thermocatalytic Route For Converting Co2 Into High-Purity Oxalic Acid, Hao Feng, Muhammad Kashif Khan, Lei Li, Hongyan Ma, Xinhua Liang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

This research outlines a four-step methodology for transforming CO₂ into high-purity oxalic acid. CO2 was first sequestered as KHCO₃ through its reaction with aqueous KOH, followed by hydrogenation using a supported AgPd/CNT catalyst in a batch reactor at an initial H₂ pressure of 60 bar and a temperature of 150°C. The formate yield reached 91.8% at optimum conditions. Potassium formate in the solid state was thermally coupled in the presence of KOH at 400°C under N2 flow, yielding potassium oxalate of up to 76% yield. The final step was the selective precipitation of potassium oxalate with ferrous …

Metagenomic Polymorphic Toxin Effector And Immunity Profiling Predicts Microbiome Development And Disease-Related Dysbiosis, Hunter W. Schroer, Francesco Beghini, Juan Antonio Raygoza Garay, Nicholas A. Christakis, Dustin E. Bosch

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Bacteria use antagonistic interbacterial weapons, such as polymorphic toxin secretion systems (TSS), to compete for niches in the human gut microbiome. We hypothesized that TSS influence gut microbiome development and disease-related dysbiosis. We developed a bioinformatic marker gene approach (PolyProf) to quantify TSS including ~200 effector and immunity genes and applied it to ~15,000 publicly available human metagenomes. PolyProf alpha and beta diversity readily distinguished 12 different human disease states and enabled the construction of highly accurate linear regression classifier machine learning models. Elastic net machine learning models integrating bacterial taxonomy with PolyProf had strong predictive value for 12 disease …

Distributed Temperature Sensing In The Spray-Cooled Shell Of A 150-Ton Dc Electric Arc Furnace Using Brillouin Optical Fiber Technology, Farhan Mumtaz, Yeshwanth Reddy Mekala, Koustav Dey, Rony Kumer Saha, Ogbole Collins Inalegwu, Manoj Kumar Pullagura, Bohong Zhang, Muhammad Roman, Nicholas Dionise, Zane Voss, Jeffrey D. Smith, Ronald J. O'Malley, Rex E. Gerald, Jie Huang

Electrical and Computer Engineering Faculty Research & Creative Works

This paper presents the deployment and validation of a Brillouin - distributed temperature sensing (DTS) system for real-time thermal monitoring of the spray-cooled upper shell of a 150-ton direct current Electric Arc Furnace (DC EAF) at Big River Steel Plant, Osceola, AR, USA. A four-channel Brillouin DTS system from OZ Optics was employed, with one active channel instrumented using an in-house-fabricated Brillouin scattering-depressed single-mode optical fiber (SMF28e+). The 60 m optical fiber sensor was fabricated, with 20 m allocated for thermal measurement and 40 m used as lead-in fiber to isolate the interrogator from the furnace environment. The fiber was …

Self-Calibrating Uav Navigation: Reinforcement Learning Approaches For Horizontal Trajectory Estimation, Shirin Nasr-Esfahani, S. Jagannathan

Electrical and Computer Engineering Faculty Research & Creative Works

Accurate unmanned aerial vehicle (UAV) trajectory estimation is essential for autonomous navigation, particularly in GPS-denied environments. Visualodometry and simultaneous localization and mapping (SLAM) approaches require precise camera intrinsic parameters, which are typically obtained through predefined or offline calibration. Instead, in this work, we propose a reinforcement learning (RL)-based self-calibration framework that estimates camera intrinsic parameters directly from monocular video sequences, without requiring prior knowledge of the camera, environment, or calibration targets. This intrinsic parameter estimation is then leveraged to achieve robust UAV trajectory estimation using only video data. We formulate the problem as a sequential decision-making task, where an RL …

Digital Twin Technologies For Battery Systems: Advancements, Applications, And Future Directions, Seyed Saeed Madani, Yasmin Shabeer, Michael Fowler, Satyam Panchal, Carlos Ziebert, Hicham Chaoui, François Allard

Electrical & Computer Engineering Faculty Publications

The relationships among deep learning, edge computing, artificial intelligence (AI), and the most recent advancements in digital twin (DT) technology for battery energy storage systems are discussed in this paper. The study highlights the need for improved cloud-edge coordination, AI model development, and stronger cybersecurity features by demonstrating real-world applications of digital twin technology in electric vehicles (EVs), aircraft, and grid storage. It also described DT-based structures for fault detection, real-time monitoring, and optimization through standardization and battery management system (BMS) fusion. Because DT-based solutions for distributed energy resources (DERs) offer improved energy management systems, various studies have been conducted …

Pin-Plane Electrical Discharge Driven By A Mosfet Dc Current Source, Myles Perry, Sidmar Holoman, Daniel Wozniak, Shirshak Kumar Dhali

Electrical & Computer Engineering Faculty Publications

The generation of atmospheric pressure nonequilibrium plasma using electrical discharges is an active area of research due to its significance in a wide spectrum of applications including medicine, combustion, and manufacturing. In our attempt to create a helium plasma jet in a pin-plane discharge with a constant current source, we observed self-pulsating behavior. We present the results of the electrical, optical, and spectroscopic measurements carried out to characterize the discharge. The duration of the discharge is a few tens of nanoseconds, and the repetition rate is in the few tens of kHz. The effect of the gap distance and gas …

An Explainable Cs-Mitigation Triangular (Ecsmt) Framework To Secure Graph Neural Networks, Sabah Ettahri, Sergio Pallas Enguita, Chung-Hao Chen, Wen-Chao Yang

Electrical & Computer Engineering Faculty Publications

This research addresses cyber risk by defending against backdoor attacks on Graph Neural Networks (GNNs). We propose the Explainable Complex System-Mitigation Triangular (ECSMT) Framework, which integrates Robust Training, Graph Regularization, and Data Sanitization into a lightweight, hardware-efficient defense layer. To evaluate structural generalizability, we conducted empirical evaluations across three distinct benchmark domains (AIDS, MUTAG, and PROTEINS) using a Graph Isomorphism Network (GIN) backbone. Under a baseline 5% backdoor subgraph trigger injection ratio, ECSMT achieves excellent utility retention, securing a Clean Accuracy (CA) of 97.33% (±0.62%) while reducing the Attack Success Rate (ASR) from 97.00% down to 69.45% on the primary …

Dynamic Direct Voltage Control Under Maximum Torque Per Ampere For Interior Pmsms, Mohamad Alzayed, Hicham Chaoui, Alaref Elhaj

Electrical & Computer Engineering Faculty Publications

A novel method for controlling the speed of interior permanent magnet synchronous motors (IPMSMs), known as the current-sensing-based dynamic direct voltage control method under the maximum torque per ampere (MTPA) concept, is introduced. This technique achieves precise tracking of machine velocity by determining the optimal combination of voltage amplitude and angle for each specific motor velocity and current/load condition. Unlike previous studies, this approach takes into account the transient model of the machine, resulting in improved accuracy during dynamic operating conditions compared with existing methods in the literature. Moreover, a comparative analysis is conducted involving different direct voltage MTPA speed …

Statewide Corridor Evacuation Response And Re-Entry Behaviors In Florida During Hurricane Irma, Xin Wang, Yuan Zhu, Hong Yang, Kun Xie

Electrical & Computer Engineering Faculty Publications

Hurricane Irma stands as one of the most destructive tropical storms to make landfall in the United States, particularly impacting the State of Florida, where it prompted the largest evacuation in history with approximately 7 million residents. The profound consequences of mass evacuation underscore the critical need to understand travel behaviors during hurricane evacuation and the recovery process. This research analyzes statewide evacuation and re-entry patterns, leveraging diverse datasets, including TTMS data from main corridors and GIS data. A statewide corridor-based empirical analysis framework is constructed to characterize evacuation and re-entry response patterns using sensor-based traffic observations. The results show …

Affordable Course Content And Open Education Resources For Undergraduate Courses Teaching Fundamentals Of Wireless Communications And Networking, Dimitrie C. Popescu, Otilia Popescu

Electrical & Computer Engineering Faculty Publications

Wireless communication systems and networks along with the services they provide have become an essential component of the modern 21st century society, fueling job growth in the wireless industry and increasing the need for engineers specialized in wireless communication systems. As a consequence, over the past two decades, undergraduate courses teaching fundamentals of wireless communication systems and networks have become common in electrical and computer engineering and technology programs. At the same time, the number of textbooks dedicated to wireless systems and networks published by mainstream publishers has also grown, with availability in various formats and offerings and a significant …

Automated Writer And Acquisition-Condition Classification Of Digitally Captured Handwriting Using Statistical Dynamic Features And Support Vector Machines, Long-Huang Tsai, Hsiang-Ju Lai, Wen-Chao Yang, Jiajun Jiang, Chung-Hao Chen

Electrical & Computer Engineering Faculty Publications

Digitally captured handwriting preserves pen trajectories and dynamic signals, but it also records hardware- and input-dependent properties that can confound forensic interpretation. This study revises a support vector machine (SVM) screening framework using 16,500 samples from 30 writers, 11 writing-content categories, and five acquisition conditions spanning three tablets and stylus or finger input. Twenty-four raw and derived time-series variables were summarized by maximum, minimum, mean, median, and standard deviation, yielding 120 features; the mode statistic was removed. Writing direction and angular velocity were recalculated with atan2-based vector formulas. Unavailable device/API channels were encoded as zero, and Z-score parameters were estimated …