Digital Commons Network^™

Learning Evolution Modeling Of Multi-Cycle Nested Cloud Manufacturing Service Ecosystem, Fang Li, Deyu Zhou, Gang Wang, Guangjun Liu, Qi Hu

Journal of System Simulation

Abstract: In view of the lack of comprehensive consideration of the individual adaptability changes of enterprises caused by the collaborative governance mechanism among multiple manufacturing units and the overall evolution trend of the system in existing learning evolution models, this proposed a learning evolution model of multi-cycle nested cloud manufacturing service ecosystem. At the micro level, the adaptive linkage decision-making among multiple manufacturing units within the enterprise was achieved in the individual layer through the nesting of planning-readiness-execution-assessment (PREA) loops and OODA loops; at the macro level, the closed-loop simulation of the individual layer, organizational layer, and social layer was …

Study On Transient Electric Field Of Insulated Rail Joints In High-Speed Railway Stations Based On Dissado-Hill Model, Junli Li, Youpeng Zhang

Journal of System Simulation

Abstract: The transient electric field distribution of insulated rail joints in high-speed railway stations under lightning impulse voltages is critical to their normal operation. Under lightning impulse voltages, considering the relaxation polarization of the insulated rail joint material, a frequency-domain mathematical model of its transient electric field was established. Based on Dissado-Hill model, the measured frequency-domain dielectric spectra were fitted and analyzed to reveal the microstructural characteristics of insulated rail joints and the interaction characteristics between microscopic particles during the polarization process. The results indicate that the relative permittivity of insulated rail joints decreases with the increasing harmonic frequency of …

Intelligent Evaluation Method For Regional Air Superiority Based On Graph Convolutional Neural Network, Peng He, Yubo Tang, Jingde Liu, Yujia Tian

Journal of System Simulation

Abstract: To address the dual challenges of the lack of quantification standards and sparse air combat samples in the superiority evaluation of modern air combat, an intelligent evaluation method for regional air superiority based on a graph convolutional neural network was proposed. The spatial grid method was employed to encode the air situation of the entire battlefield airspace into a new data representation, namely the air superiority matrix. A novel air superiority quantification model was applied to quantify the air superiority label values of spatial grids, and four key operational capabilities closely related to air superiority contention were selected as …

Sensorless Control Of Pmsm Based On An Improved Super-Twisting Sliding-Mode Observer, Shiyu Chen, Xinmin Chen, Xionglong Hu, Heng Wang, Yepeng Han, Jiajie Chen

Journal of System Simulation

Abstract: To address the chattering in back electromotive force estimation and the gain mismatch across a wide speed range when using a conventional super-twisting sliding-mode observer in the sensorless control system of a permanent-magnet synchronous motor, this paper proposed an improved adaptive-gain super-twisting sliding-mode observer. A linear correction term was introduced into the super-twisting algorithm and integrated with a gain adaptation law based on speed feedback, enabling the system to achieve finite-time convergence and high-precision back electromotive force estimation over a wide speed range. A variable-gain adaptive complex-coefficient filter was constructed to effectively suppress the harmonic components in the observed …

Line Spectrum Enhancement Technology Based On Second-Order Vector Hydrophone, Zhengkai Wang, Yirong Yu, Qing Hu

Journal of System Simulation

Abstract: In view of the problem of limited detection of line spectrum signals in low signal-to-noise ratio underwater environments, a spatial-temporal cooperative line spectrum enhancement technology based on a two-dimensional second-order vector hydrophone was proposed. A receiving signal model of the two-dimensional second-order vector hydrophone was established to clarify the spatial characteristics of its output signals. For spatial signal processing, the signals from each channel of the vector hydrophone were fused to suppress noise, and a channel combination method with high spatial directivity gain was proposed to achieve spatial processing gain. For temporal signal processing, an adaptive line spectrum enhancer …

Dodaf-Opm-Sd Cross-Layer Automated Mapping Method Based On A Unified Semantic Bridge, Lei Cheng, Gang Xiao, Binbin Wang, Siming Peng, Haozhe Liang, Xiangwu Gong

Journal of System Simulation

Abstract: To address the problems of the inability of DoDAF views to directly drive simulations and the insufficient cross-layer semantic alignment and consistency verification, a DoDAF-OPM-SD cross-layer semantic automated/semi-automated mapping and verification method was proposed in this paper. Targeting tactical/operational-level problems dominated by "conservation+feedback+time delay", the proposed method reduced manual mapping under expert adjudication based on a "minimal executable view set". The object-process methodology served as a semantic bridge to map architectural elements into the stock-flow-feedback structures of system dynamics; semantic embedding disambiguation, integer programming harmonization, and K-nearest neighbor parameter completion were integrated; end-to-end traceability was connected through traceability identifiers, …

Design And Implementation Of Hdrt Real-Time Simulation System, Huiji Zheng, Guangsen Wang, Qing Liu, Kang Wang, Zhiwei Wang, Zhenyu Zhang, Shuo Wang, Zhu Liu

Journal of System Simulation

Abstract: In view of the real-time simulation requirements of large-scale complex systems such as power electronics, a hidden dragon real-time(HDRT) simulation system was developed. The strict time constraints of simulation tasks were guaranteed based on a resource-dedicated real-time scheme, supporting fixed-step and multi-rate simulations from the second level to the hundred-nanosecond level. A hybrid CPU-field programmable gate array(FPGA) architecture was adopted to accelerate computation. The system could utilize multiple simulators for parallel simulation and realized microsecond-level real-time data interaction between simulators through a dedicated PCIe switch. A single simulator could be expanded through I/O interface equipment, supporting a maximum input …

Numerical Simulation Of Water Tank Solidification In A Firefighting Aircraft Under High-Altitude Cold-Soak Conditions, Guanmian Liu, Zhihang Cheng, Hejun Qin, Kangzhi Yang, Qing Wen, Kun Gao

Journal of System Simulation

Abstract: A systematic numerical simulation study was conducted to address the issue of internal water tank solidification in firefighting aircraft under high-altitude low-temperature conditions. Based on computational fluid dynamics methods, a solidification-melting model considering fluid-structure interaction heat transfer and phase change processes was adopted. Through reasonable simplification of the complex geometric model, a quasi-three-dimensional computational model suitable for engineering analysis was developed. The influence laws of key parameters, including high-altitude cold-soak temperature, ground initial water temperature, and cold-soak time, on the freezing characteristics of the water tank were investigated. Combining with the parameter influence laws, a safety criterion using the …

Combat Effectiveness Evaluation Of Anti-Ship Missiles For Intelligent Autonomous Recognition, Long Zhang, Xuanming Feng, Zhen Lei, Bo Yang, Ying Wang

Journal of System Simulation

Abstract: To address the core issues of poor adaptability of static fusion strategies in existing recognition models, as well as the simplistic evaluation system and its disconnection from dynamic confrontation requirements, a practical four-dimensional evaluation system encompassing "recognition accuracy, antijamming stability, decision timeliness, and modal complementarity" was constructed, and an operational effectiveness composite index (OECI) capable of dynamically adapting to tactical scenarios was proposed. A multimodal dynamic attention fusion network (MDA-Net) for anti-ship missiles in complex confrontation environments was designed. Through heterogeneous feature decoupling, dynamic weighting of cross-modal attention, and a hierarchical gating decision mechanism, the autonomous evaluation and adaptive …

Infrared Image Generation Method Based On Improved Cyclegan, Qiqi Jin, Xiang Zhang, Li Gao, Lin Zhang, Junliang Yan, Peiyao Li

Journal of System Simulation

Abstract: To address the problems in current infrared image generation such as insufficient contrast between target and scene, excessively large discrepancies from real scenes, indistinct thermal source features, and great difficulty in constructing measured infrared image datasets, an improved CycleGAN-based infrared image generation method was proposed. By optimizing the network structure of the generator and adding a non-local module and a CBAM convolutional attention mechanism into the generator, the extraction capability of CycleGAN for infrared features was enhanced, enabling the network to capture the subtle features of targets more accurately; a perceptual loss function was introduced to improve the detail …

Evaluation Of General Voronoi Diagram Decomposition For Harmonic Fields In Navigation Of Dynamic Environments, Franco Abullarade

Master's Theses

Harmonic potential fields provide provably minimum-free navigation, but any change to the workspace geometry invalidates the field and forces a costly global recomputation, typically restricting them to static environments. This thesis extends the harmonic map framework of Vlantis et al., which maps the free workspace onto a unit disk and uses an atlas of per-region transformations, to dynamic indoor settings. First, we replace their manually annotated room partition with an automatic decomposition based on the Generalized Voronoi Diagram, allowing the atlas to be built from an arbitrary occupancy grid in an automated way. Second, we introduce a localized repair procedure …

Multidimensional Determinants Of Gait, Balance, And Softball Performance In Female Youth: Biomechanics, Resource Access, And Psychosocial Factors, Allie G. Mcauliffe

Master's Theses

Movement quality is a fundamental indicator of healthy childhood development and supports physical, emotional, psychosocial, and cognitive well-being. Movement quality is influenced by multiple biomechanical, environmental, and psychosocial factors, yet the relationships among them remain poorly understood in underrepresented populations such as female youth, particularly in softball. Previous studies have largely examined biomechanics, resource access, and psychosocial experience independently, and few have investigated how these factors interact in female youth softball players. To address this gap, this study compared gait and balance characteristics between softball (N = 34) and non-softball (N = 7) female youth, examined associations between resource access, …

Modulating Linear Frequency Modulated Pulses To Send Communications Data In A Bistatic Sar Scenario, Jarren T. Worthen

All Graduate Theses and Dissertations, Fall 2023 to Present

Synthetic aperture radar (SAR) is the technology that enables the creation of images using radar waves, allowing images to be formed regardless of weather. In bistatic SAR a radar platform uses a radar pulse from a separate platform to form an image. It is important that these radar systems are able to communicate with each other. Rather than wasting energy and space flying with a separate communication system, the radar systems could use the already existing SAR system to send data between each other while still forming SAR images. The work of this thesis is to show how very simple …

Evaluating Data Management Practices And Ontology Development For Transportation Safety Assets, Brig Dean Adams

All Graduate Theses and Dissertations, Fall 2023 to Present

Data has begun to permeate transportation agencies, with every process, asset, and event generating a great volume of data. This data helps engineers and decision makers determine maintenance schedules, devise infrastructure investment strategies, improve safety, and plan for future needs. Due to the size of transportation agencies and the diversity of the data they collect, their data is often stored in different systems, managed by different groups, and described using inconsistent terminology. These challenges make it difficult to locate information, combine data from multiple sources, and confidently use data to support important decisions.

This research examined how transportation safety asset …

Human-Centered Electric Vehicle Adoption Framework For Smart Mobility: Modeling Perceived Range And Charging Anxiety As A Psychological Barrier, Fatemeh Nazari, Abolfazl (Kouros) Mohammadian, Thomas Stephens

Civil Engineering Faculty Publications

Electric vehicles (EVs) offer a transformative pathway toward reducing the environmental, economic, and health-related externalities of internal combustion engine vehicles in urban settings. Despite substantial advances in battery technology, charging infrastructure expansion, and supportive policy incentives, EV penetration remains limited which poses challenges for smart and sustainable mobility planning. A critical yet insufficiently modeled barrier to adoption lies in the psychological perceptions surrounding electric driving range and charging reliability, which is commonly framed as “range anxiety,” but more broadly reflecting perceived range and charging anxiety. To address this gap, this study introduces a latent psychological construct capturing individuals’ perceived range …

Optimal Scheduling Of Virtual Power Plants Considering Photothermal Power Stations And Hydrogen Energy Utilization, Yousong Chen, Ruofa Cheng, Yi Liu, Yi Zhang, Zhihao Zuo

Journal of System Simulation

Abstract: To enhance the operational stability and low-carbon performance of virtual power plants (VPPs) with high shares of renewable energy, a coordinated dispatch model integrating concentrated solar power (CSP) plants with power-to-gas (P2G) and carbon capture is developed. An optimal VPP scheduling strategy is proposed, combining a stepped carbon trading mechanism with a compensation coefficient and dynamic hydrogen blending. To address multi-source uncertainties in wind power, CSP power, and loads, an envelope boundary model is used for simulation. Information gap decision theory (IGDT) is applied to provide customized solutions for decision-makers with different risk preferences. A bi-objective optimization model is …

Fault-Tolerant Control Method For All-Type Actuator Faults Of Evtol Aircraft, Juan Wang, Guorui Li, Zhiyong Fan, Huijie Chen

Journal of System Simulation

Abstract: To address all-type actuator faults, especially nonlinear distortion issues, in multi-rotor eVTOL aircraft, a novel fault-tolerant control method was proposed. A fault function was established at the rotor speed level, and a fault-tolerant control algorithm combining dynamic robust nonsingular fast integral terminal sliding mode with a high-order finite-time disturbance observer was designed to achieve fault-tolerant control through rotor redundancy allocation. The nonsingular fast integral terminal sliding mode algorithm was improved, and a dynamic system containing actuator faults and their derivatives was constructed via a dynamic surface to achieve system convergence within finite time, avoiding the singularity and chattering problems …

A Method For Assessing The Contribution Degree Of An Aviation Delivery System And Identifying Key Equipment, Xiaofeng Liu, Chengze Jiang, Xingyu Chen, Deyin Jiang, Bolin Shang, Bifeng Song

Journal of System Simulation

Abstract: Based on the delivery efficiency and delivery quality, a general aviation delivery system effectiveness evaluation model was constructed, and a calculation method of system contribution degree based on efficiency was given. By combining the system calculation experiment and simulation experiment based on agent-based modeling and simulation (ABMS), the design idea of the Monte Carlo simulation experiment for key equipment identification and equipment technology development trend analysis was sorted out, and the key equipment identification method based on ABMS and contribution evaluation was proposed. By taking the intercontinental long-range aviation delivery mission as an example, a variety of simulation experiments …

Optimization Of Node Deployment For Three-Dimensional Heterogeneous Wsn In Elongated Structural Space, Jiguang Yang, Jiuyuan Huo, Fang Cao, Cong Mu

Journal of System Simulation

Abstract: To achieve effective coverage of key monitoring points in an elongated structural space, a heterogeneous wireless sensor network(HWSN) deployment optimization method combining the virtual force algorithm(VFA) and multi-strategy improved whale optimization algorithm(MSIWOA), namely HVF-MSIWOA, was proposed. A dynamic adaptive weight mechanism and a t-distribution perturbation operator with heterogeneous degrees of freedom were designed, enabling the whale optimization algorithm(WOA) to balance global exploration and local exploitation and jump out of local optima; combining the topological characteristics of the elongated space and node density distribution, an adaptive virtual force distance threshold between heterogeneous nodes was constructed; the mapping relationship between network …

Three-Dimensional Gaussian Reconstruction Of Large-Scale Scenes Under Multi-View Geometry Constraints, Haohao Cui, Yanqiang Di, Qing Liu, Xianguo Meng

Journal of System Simulation

Abstract: To enhance the geometry reconstruction quality of the GS algorithm in large-scale scene reconstruction, an optimization method constrained by multi-view geometry reconstruction results was proposed. 2D Gaussian planes were used as geometric primitives to overcome depth anisotropy, and dense depth maps generated by DUSt3R and aligned by sparse point clouds were introduced as constraints. By designing a multi-stage optimization strategy that decouples geometry and rendering, the gradient conflict problem in multi-objective training was solved. Experiments on the MatrixCity dataset indicate that the method surpasses comparison methods in related indicators of geometry reconstruction quality and rendering quality in large-scale scenes. …

Parameter Dependent Chen-Fliess Series And Their Nonrecursive Interconnections, Natalie T. Pham

Electrical & Computer Engineering Theses & Dissertations

In control theory, a Chen-Fliess functional series is a weighted sum of iterated integrals constructed from a given set of input functions. Such series can be used to represent nonlinear input-output systems. In applications, they have been employed to characterize interconnected nonlinear systems, to solve system inversion and tracking problems, and to design predictive and adaptive controllers.

Distributed parameter systems exhibit spatial dependence along with temporal dependence. Such systems are typically represented in terms of partial differential equations. In control theory, there appears to be no existing method for representing the input-output map of a distributed system via a Chen-Fliess …

Enhancing Stem Education With Modeling, Simulation, And Ai Technologies: From Virtual Laboratories To Intelligent Teaching Assistants, Yiyang Li

Electrical & Computer Engineering Theses & Dissertations

Rapid advancements in modeling and simulation (M&S) and artificial intelligence (AI) present new opportunities to enhance various aspects of STEM education, from virtual laboratories that simulate physical lab environments in software to intelligent teaching assistants that provide on-demand, curriculum-aligned instructional support. Virtual laboratories offer a potential solution to the access and scalability challenges of laboratory courses by allowing students to conduct experiments without physical equipment or geographical constraints. AI-powered teaching assistants, particularly those grounded in course-specific materials, can help mitigate the instructional support gap that arises when students work independently in digital learning environments. This dissertation presents three-phase research into …

A Causal Inference Protocol For Root-Cause Diagnosis In Non-Stationary Industrial Time Series, Cansu Yalim

Engineering Management & Systems Engineering Theses & Dissertations

Industrial fault diagnosis increasingly relies on data-driven methods, yet most approaches assume process stationarity and treat association-based rankings as sufficient evidence for root-cause identification. Neither assumption holds when operating phases and fault progression create distinct behavioral regimes with shifting relationships among variables, and neither answers which feasible corrective action would alter a fault trajectory. The absence of a procedure addressing non-stationarity, causal identifiability, and decision-relevant effect estimation constitutes the gap this dissertation targets. In this context, a regime is a time period in which the process operates under a relatively consistent setting, so the relationships among variables are approximately stable …

Physics-Guided Deep Learning For Predictive Modeling Of Spatiotemporal Dynamical Systems, Niharika Deshpande

Engineering Management & Systems Engineering Theses & Dissertations

Many physical and networked systems evolve under continuously changing spatial and temporal conditions. Transportation networks respond to fluctuating demand, atmospheric fields reorganize as storms intensify, and coastal response depends on localized forcing pathways. Modeling such systems requires learning formulations that adapt to evolving structure, operate on irregular geometries, and provide interpretable measures of predictive uncertainty. This dissertation develops a physics-guided spatiotemporal learning framework designed for structured dynamical systems whose governing interactions are neither static nor Euclidean. The central premise is that spatial relationships in these systems are dynamic and geometry-dependent. To represent this behavior, system states are modeled on time-varying …

Residual Stress Informed Reconstruction And Failure Analysis Of Manufacturing Induced Composite Meso-Structure, Mohammad Nazmus Saquib

Mechanical & Aerospace Engineering Theses & Dissertations

A physics informed, AI-augmented framework is developed to enable digital twins of molded composite materials by linking manufacturing induced residual stresses to a local meso-structure. By reconstructing and explicitly modeling these architectures, the framework reveals how processing driven meso-structural variability governs stiffness, damage evolution, and failure. The work focuses on two technologically important systems: prepreg platelet molded composites (PPMC), characterized by inherently stochastic platelet architectures, and 2/2 twill glass fiber/PA6 organosheets, whose periodic but locally variable weave geometry influences mechanical response. For PPMC, the Residual Stress Informed Microstructure Reconstruction (ResIMiR) framework is introduced, combining thermoelastic strain fields with deep learning …

Computational And Ai Tools For Understanding Telomere-Associated Cancer Mechanisms, Eleni Adam

Computer Science Theses & Dissertations

Telomeres are the protective caps of the human chromosomes and are critical for genome stability. Dysfunctional telomeres caused by their erosion with age and cell proliferation as well as by defects in their maintenance is a major early event leading to genome changes and cancer. Subtelomeres possess the critical role of regulating adjacent telomeres. Due to their complex repeat structure and high variance from one person to another, these areas have not been analyzed in detail. We present a set of computational and machine learning tools to aid in the understanding of subtelomere structure and its rearrangements in cancer.

Initially, …

Reframing Soil Freezing As An Unsaturated Process, Antai Dong, Xiong Zhang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Soil freezing and frost heave are inherently unsaturated soil phenomena. However, most existing numerical models are based on saturated soil mechanics or assume full saturation. This simplification introduces conceptual inconsistencies, requires modifications that violate fundamentals in soil mechanics and fluid mechanics, and often leads to the use of self-conflicting soil properties. To overcome these limitations, this study develops a physically consistent, fully coupled thermohydraulic model for soil freezing grounded in modern unsaturated soil mechanics. A soil freezing characteristic surface (SFCS) is introduced to represent unfrozen water content in partially frozen soils as a function of both suction and temperature. Recognizing …

Thermal Rating And Prediction Of Roadway-Embedded Power Electronics For Dynamic Wireless Power Transfer, Forrest D. Nichols

All Graduate Theses and Dissertations, Fall 2023 to Present

Electric vehicles can be charged while driving through wireless charging coils buried in the road surface. To avoid running expensive cables from roadside equipment to each charging pad, the electronics that control the power transfer can also be buried in the road. However, burying these circuit boards removes the ability to cool them with fans or flowing air, so the heat generated during operation must escape naturally into the surrounding road material. If the boards get too hot, components fail—a problem that has already been observed in prototype systems.

Predicting how hot each component on a circuit board will get …

Sensitivity Analysis Of A Low-Power Wireless Capacitive Charging System To Inform Thermal Limitations And Battery Size Reduction Potential For Electric Passenger Vehicles, Karmen Teuscher

All Graduate Theses and Dissertations, Fall 2023 to Present

The purpose of using electric vehicles instead of internal combustion engine vehicles that burn gas is to reduce pollutants in the air and potential environmental impacts such as climate change. EVs produce much less air pollutants than ICEVs but manufacturing the EV batteries and the repeated recharging still contributes to the overall air pollution.

Capacitive power transfer systems can wirelessly charge vehicles through the road as they drive along highways or stop at traffic lights. If vehicles charge as they drive, an opportunity opens to reduce the size of the battery while maintaining the same driving range. Reducing the size …

Cadmium Biosorption By Fusarium Venenatum And Its Application In Functional Permeable Materials For Metal Removal, Bradley Lawson

All Graduate Theses and Dissertations, Fall 2023 to Present

Heavy metals are pollutants of increasing concern as continued industrialization and urbanization have escalated the discharge of these toxins into aquatic environments. Cadmium (Cd) is a metal of particular concern due to its acute toxicity and high mobility in aquatic ecosystems. Given these characteristics Cd poses significant health risks to both humans and aquatic ecosystems. The continued development of sustainable, low-cost remediation technology is imperative to manage metal pollution.

This research explores the use of fungal-based remediation systems to remove Cd from contaminated water. Living biomass of the filamentous fungus Fusarium venenatum was evaluated as a biosorbent material for Cd …