Digital Commons Network^™

Microstructure Evolution Characteristics Of Coal Briquettes During Hot Pressing Carbonization And A Temperature Control Method, Gan Qingqing, Xu Jiang, Peng Shoujian, Cai Guoliang

Coal Geology & Exploration

Objective Coal briquettes used for physical simulations of gas disasters in coal mines generally exhibit low strength and high permeability. To address this challenge, this study developed a new hot pressing process and a temperature control method to optimize the mechanical and seepage performance of coal briquettes. Methods First, an optimal mixing ratio scheme was determined based on the Horsfield close-packing theory, and coal briquettes were prepared at different temperatures using an independently developed hot pressing system. Subsequently, the microstructure evolution patterns of the hot-pressed coal briquettes were characterized using an X-ray diffractometer (XRD), an X-ray photoelectron spectrometer (XPS), a …

Evolutionary Characteristics And Fine-Scale Zoning Of Overburden Fractures For Pressure-Relief Mining Of Soft Coal Seams, Wang Long, Deng Zhiliang, Zhang Zongxiang, Guo Baohua, Tan Hongchen, Zhao Pengtao, Hu Longsheng

Coal Geology & Exploration

Objective During the mining of coal seam groups, substantial gas is prone to rush into the mining face from adjacent coal seams through interconnected mining-induced fractures. This poses a threat to safe coal mining. Under pressure-relief mining of soft coal seams, their low permeability and high stress sensitivity present challenges to the successive mining of protective and protected coal seams. Specifically, mechanisms behind the overburden fracture evolution remain poorly understood, and it is difficult to identify preferential pathways for gas migration accurately. Methods This study investigated coal seam groups in the Jiahe mining area of Hunan Province as the engineering …

Spatial Topological Configurations Of Cleats And Geometrical Quantitative Characterization Of Matrix Blocks In Deep Coal Seams, Shen Jian, Li Wei, Tian Yongjing, Ma Tianyu, Zhang Hewei, Dong Jiying, Zhu Peipei

Coal Geology & Exploration

Objective Cleats in deep coal seams are characterized by strong heterogeneity, and their topological configurations, as well as their topological relationships with matrix blocks, remain poorly understood. On the other hand, the assumptions regarding the size and geometry of matrix blocks adopted in representative reservoir structure models and numerical simulations do not fully reflect actual reservoir conditions. Methods Deep coal cores collected from the northeastern Ordos Basin were investigated in this study. Using CT scanning and topological theory, a multi-dimensional topological parameter system was established to characterize cleats in deep coal seams. Furthermore, four topological configurations of cleats in deep …

Investigating Seepage In Rough Porous Media Fractures Using Fractional Brownian Motion Simulation, Liu Weitao, Kong Debin, Mao Qingfu, Zhao Jiyuan, Gu Yulong, Zhang Xiao

Coal Geology & Exploration

Background Natural rock fractures are often partially filled with permeable materials such as silt and minerals under long-term geological and hydraulic actions, forming complex structures containing unfilled voids. The seepage characteristics of such fractures significantly influence petroleum extraction, mine water prevention, and the stability of underground engineering projects. Methods To reveal the underlying seepage mechanisms, this study generated rough profiles of unfilled voids with different fractal dimensions based on Fractional Brownian Motion. A theoretical expression for the overall permeability of partially filled fractures was derived, and a coupled free flow–porous medium flow numerical model was established. This framework was used …

Key Technologies And Engineering Practices For Green Drainage Of The Jurassic Burnt Rock-Hosted Water In The Shenfu Mining Area, Ji Zhongkui, Mou Lin, Wang Hai, Zhu Kaipeng, Zhao Kaixing, Chen Pan, Xue Xiaoyuan, Han Qiang, He Bo, Wang Fuming

Coal Geology & Exploration

Objective In the northern part of Shaanxi Province, coal mining has led to a pronounced contradiction between coal mining and water conservation, along with a serious threat to China’s ecological redline. These challenges necessitate transforming the mine water drainage pattern in coal mines. Green mine water drainage represents a key approach to achieving coordinated coal-water production in areas containing burnt rocks. Methods Focusing on the conservation-oriented utilization of the Jurassic burnt rock-hosted water in a coal mine within the Shenfu mining area, this study explored a solution to coordinated coal-water production in areas affected by burnt rock-hosted water from the …

Selection And Verification Of Optimal Key Parameters Of Ultra-Wideband Radars For Life Detection In Coal-Rock Shielding Environments In Coal Mines, Huang Yuan, Zheng Xuezhao, Wen Hu, Jin Feiyang, Xu Chengyu, Liu Yin, Ding Wen

Coal Geology & Exploration

Objective and Methods Ultra-wideband (UWB) radars can transmit electromagnetic waves that penetrate coal and rock media, thereby addressing the challenge of detecting and localizing personnel trapped in shielding environments during mine collapse. However, key parameters for UWB radar detection are difficult to determine due to complex mine environments, diverse media, and unclear dispersion characteristics. To deal with this issue, this study determined the frequency-dependent dielectric properties of various coal and rock media, as well as human tissues, through experiments and fitting. In combination with actual rescue scenarios, this study established the electromagnetic equivalent model of shielding environments in coal mines. …

A Method Of Reflected In-Seam Wave Imaging Based On The Structural Similarity Index Of Adjacent Gathers, Wang Ji, Wei Zhongli, Ye Hongxing, Wu Guoqing, Liu Shuo, Niu Huan, Su Xiaoyun

Coal Geology & Exploration

Background Reflected in-seam wave detection represents a major method for exploring geological anomalies in underground coal mines. This method is well suited to detecting concealed structures (e.g., faults and collapse columns) within coal seams in the tunneling direction of roadways or along their side walls. In recent years, to meet the safety requirements of green mine construction, explosive sources have been substituted with mechanical hammer impacts in increasing reflected in-seam wave detection. However, compared to conventional explosive sources, hammer impacts exhibit significantly lower instantaneous energy intensity and consistency. These limitations lead to reduced quality of reflected in-seam wave imaging, thus …

Probe Cytotoxic And Oxidative Stress Effects Of Nanoplastics On Caco-2 Cells: Insights From Raman Spectroscopy And Machine Learning, Bryan Gustafson, Negar Kosari, Emily Brothersen, Morgan Mosher, Anhong Zhou

Biological Engineering Student Research

Nanoplastics and microplastics have become an increasing ecological and health concern due to their widespread presence in the environment and food chain. In this study, Caco-2 cells were used as an in vitro model of the human intestinal epithelium to investigate the cytotoxic effects of polystyrene nanoparticles and microparticles of varying sizes, concentrations, and surface modification. Oxidative stress and apoptosis were evaluated following particle exposure. Raman spectroscopy, combined with machine learning analysis, was employed to detect and characterize biochemical alterations in the cells. Several peak ratios were selected to cluster data depending on size. A correlation between apoptosis and both …

Manufacturing Advances For Cost Effective, Large Aperture Monolithic Telescopes, T. Suratwala, R. Steele, G. Tham, J. Ross, J. Johnson, O. Herrera, M. Cahill, D. Bechtold, R. Bechtold, F. Ravizza, J. Cortes

Small Satellite Conference

Space has become increasingly more contested over the last decade, with the proliferation of satellites and space assets that require new levels of Space Domain Awareness (SDA). Space is often described by the US Government as the next warfighting domain. Control, understanding and dominance over this vast domain requires exquisite and complex optomechanical systems.

Lawrence Livermore National Lab’s Space Science and Security Program (SSSP) has developed unique monolithic optics, which are ground-aligned during manufacturing and are nearly athermal. These qualities greatly reduce the complexity of the optical payload when compared to legacy telescope designs. Monolithic optics deliver excellent imaging capabilities, …

Lego®-Based Cubesats For Space Outreach, Stefan Brandle, Joshua Brown, Evan Smith, Drew Nye, Sydney Reddy, Twidy Kwae, Kaiya Grzesiak, Matthew Roderer, John Hetz

Small Satellite Conference

Taylor University Computer Science and Engineering is building a satellite having a LEGO®-robotics-based payload.

Mission Goals

• Have university students build a novel ELEO satellite
• Demonstrate viability of LEGO robotics electronics in space for short-term low-altitude missions
• Enhance space awareness by capturing the public's imagination through integral use of LEGO in an actual satellite
• Identify partners willing to provide advice and promote this project
• Create additional pathways for K-12 and university student participation in building satellites and satellite-related projects
• Support other space-education organizations through a high-visibility satellite project
• Continue space outreach efforts in the spirit of the ThinSat project
• ThinSat was …

Development Of Wavelength-Division-Multiplexed All-Optical Relays For Low-Earth Orbit Free-Space Optical Communication Networks, Travis Jones, Justin Cook, Chris Krush, Doruk Engin, Keith G. Petrillo

Small Satellite Conference

In this work, we designed, built, and tested an all-optical relay amplifier to enable a space-based all-optical backbone for laser communications networks. The design sought to optimize links for LEO-based networks incorporating appropriate span lengths and optical terminal specifications. We incorporate an add-drop multiplexer for rerouting signals and designed the system to be flexible over span lengths with a nominal range of 1,800 km. We performed several tests of the nominally 60 dB gain amplifier to assess link dynamics unique to free space optical communications (FSOC) including the impact of pointing jitter, nonlinearities, gain flattening, and wide-band filters on an …

Intel® Government Technologies Space Products: Leading Edge Compute For Space, Robert Ciccariello, Ricardo Ascazubi, Kyle Dobkins, Nitesh Melwani, Ed Mily, Mike Nassan, Sean O’Neill, Ruchika Singh, Dan Weinstein

Small Satellite Conference

Commercial off-the-shelf (COTS) components are unlikely to meet the environmental survivability and assurance requirements to accomplish mission objectives in the harsh space environment. On the opposite end of the spectrum, developing custom space components on leading-edge technologies will often require multiple contractors and lengthy R&D efforts that significantly increase development costs and timelines. Intel Government Technologies (IGT) is introducing a space product roadmap, focused on space grade systems-in-package (SiPs) designed to address the transition from bespoke legacy architectures to low-SWaP, high-performance processing platforms for on-orbit systems. IGT Space Products are derived from Intel’s latest commercial technology and are uniquely configured, …

The Genesis Of The Annual Usu Conference On Small Satellites, Rex Ridenoure, Alex Da Silva Curiel, Martin Sweeting

Small Satellite Conference

On this milestone of marking the 40^th SmallSat conference, this paper provides a capsule summary of how it all started in 1987, and why. 

By January 1986, Utah State University was actively involved with NASA’s Space Shuttle program, which from April 1981 through mid-January 1986 had notched 24 successful missions in a row, including nine in 1985. Missions were starting to appear routine, and the manifest was full for many dozens of future missions. 

The Shuttle’s Get Away Special (GAS) secondary payload program had become quite popular within academic, government and commercial sectors, and through 1985 six dozen separate …

Sailing To The Stars Iss Experiment: Results And Conclusions From Light Sail Deployments In Microgravity, Verena Padres, Parishee Bajaj, Venkata Chalamalasetty, Claire Kim, Joshua Umansky-Castro, Dionna Parina, Gabriella Elcsics-Gonzalez, Cameron Goddard, Ethan Francolla, Mason Peck, Andrew Filo, Alex Burke, Olivia Gámez Holzhaus, Heath Mills, Christopher Kelly

Small Satellite Conference

Sailing to the Stars is a mission to test the deployment of free-flying light sails on the International Space Station (ISS). The objective is to understand how different deployer designs affect the stability of both the CubeSat Deployer and the light sail during and after the deployment event. Data from the IMU onboard the deployer and video footage from wall-mounted cameras are used to analyze these dynamics. The findings shall inform the design of future missions that employ this free-flying ChipSat-sail architecture.

The hardware launched with Crew-11 on August 1^st, 2025. Nicole Ayers conducted the experiment on August …

Herding Cubecats: Challenges And Lessons Learned From A Student-Led Cubesat Organization, Matthew Verbryke, Samuel Kohls, Nathan Nguyen, Michael Carovillano, Donghoon Kim

Small Satellite Conference

1. What is CubeCats?

CubeCats is a student-led technical engineering organization founded in 2015 at the University of Cincinnati (UC) with the mission of providing its members with hands-on, educational experience in space systems engineering, primarily through the design, development, testing, launch, and operation of flight-worthy CubeSats and High Altitude Balloons.

CubeCats’ operating model differs significantly from many university-based satellite programs:

• The organization is entirely managed and run by students, the majority of whom are undergraduates (UC faculty and staff serve primarily in an advisory role)
• The organization is entirely volunteer-based, with no direct integration into coursework or on-campus research …

Development Of A Design Tool For 3d-Printable Cold Gas Thruster Systems For Nanosatellite Missions, Mikolaj Szyszka, Katherine Smith

Small Satellite Conference

Currently, there are 5219 Nanosatellites and CubeSats in orbit [1]. A decade ago, this number was only 800 [1], with forecasts predicting a total of 14,000 small satellites in orbit by 2033 [2]. However, out of the ones that are currently operational, only about 5% are equipped with a propulsion system. Omitting the electric and classified thrusters, cold gas systems are the most popular due to their simplicity and ease of operation. This shows a general lack of manoeuvrability and agility within small satellites in orbit. The proposed C.O.N.E tool aims to bridge the gap between nanosatellite manufacturers and simple …

Processor And Sensor Interfacing On Fpga For Stp-H12-Vantage Space Mission, Christopher Brubaker, Alan D. George

Small Satellite Conference

Previous SHREC Missions

• STP-H5-CSP – Demonstration of CSP and hybrid COTS + rad-hard architecture
• STP-H6-SSIVP – Parallel and distributed computing with multiple CSPs
• STP-H7-CASPR – Onboard processing with next-gen sensors and apps

STP-H12-VANTAGE

• Visual And Neuromorphic Tracking And Geosensing Experiment
• Correlation of neuromorphic and visual sensor data
• Advancing usage of COTS SoMs supplemented with rad-hard monitoring and watchdog circuitry

Rejection Of Fe (Iron) And Kmno4 (Organic Substance) Parameters In Peat Water Using Organic Membranes, Muhamad Rafli Sakti Mulia Gonera, Siti Umi Kalsum, Sarah Fiebrina Heraningsih

Journal of Materials Exploration and Findings

Peat water is a surface water source widely used by people in swampy and lowland areas, but it has poor quality characteristics such as high organic matter content, low pH, and dissolved metal levels such as iron that exceed the threshold. These conditions can cause health problems and reduce the quality of clean water so that effective treatment technology is needed. This study aims to analyze the effectiveness of ultrafiltration membranes made from chitosan from shrimp shell waste in rejecting iron (Fe) and organic substances in peat water, and to determine the effect of pressure on separation performance. This study …

Developing Field And Spaceflight Microscopy, Nikki Johnston

Dissertations and Theses

Designing for spaceflight favors the reduction of unnecessary features and cost-cutting, whether thisbe computation, hardware, or procedure. Resources are spent toward fortification and mission success over convenience. Such design goals paired with the relatively smaller budgets of academia lead us to do as much as we can in-house and use open-source as much as we can without compromising mission success. We also believe that thoroughly testing technology in extreme environments on earth is necessary for the success of a flight instrument. We focus on microscopy for life detection. I have spent my time here learning methods of hand-building microscopes to …

Assessment Of The Radionuclide Concentration Levels Of Water And Sediments Along The Mara River, Gasper Kachenge, Abubakary Salama, Abdalah Kileo, Furaha Chuma

Tanzania Journal of Science

For many years, several factors have impacted the water quality of the Mara River, including population growth, agricultural expansion, livestock keeping, mining, and industrial activities. These factors have intensified water pollution and climate change effects around the river. While previous studies have mainly focused on assessing heavy metal pollution risks on the Mara River, this study evaluates the concentration levels of radionuclides in boreholes, water, and sediments along the river and its tributaries. Naturally occurring radioactive materials, including 226Ra, ²³²Th, and ⁴⁰K, were evaluated. A high-purity germanium radiation detector (HPGe) with a coaxial detector system coupled with Gamma Vision software …

The Self-Aware Room: A Framework For Operational Self-Awareness In Evolvable Blended Environments, David B. Smith

Publications and Research

The Self-Aware Room (SAR) is a room-scale research environment developed within the larger Balanced Blended Space and Blended Reality Performance System research trajectory. Rather than treating the room as a conventional “smart” environment composed of fixed automation technologies, SAR approaches it as an evolvable blended environment made from physical, virtual, conceptual, sensory, computational, and performative relationships. Its defining feature is not any particular sensor, model, or output device, but the set of transformations through which physical activity becomes structured observation, bounded representation, interpreted state, governed decision, and mediated response.

This paper develops the conceptual and methodological foundations of SAR as …

Engineering For Compromise, Ron Ross

Other Faculty Materials

Modern systems cannot credibly depend on every component, account, service, person, supplier, and supporting dependency remaining trustworthy secure throughout the system life cycle. Prevention-centered cybersecurity remains essential, but for mission-critical systems it is not a sufficient engineering strategy. This paper introduces the concept of Engineering for Compromise (EfC), a systems security engineering strategy that deliberately assumes selected system elements may fail, become malicious, lose integrity, or fall under adversary control and then asks whether the system can continue to prevent unacceptable loss. EfC separates component compromise, system compromise, and mission loss as distinct events and uses architecture to place barriers …

Plasma-Generated Ozone For Odor Removal, Jordan Marot

Seton Hall University Dissertations and Theses (ETDs)

Ozone (O₃) is gaining popularity for its use in industrial and environmental applications, including water treatment, air purification, disinfection, and odor remediation. As a powerful oxidizing agent, ozone is highly effective in destroying harmful bacteria and degrading hazardous gas pollutants such as hydrogen sulfide (H₂S). Dielectric barrier discharge (DBD) reactors are widely used for commercial ozone production under atmospheric-pressure conditions. However, ozone yield and selectivity are strongly influenced by operating parameters, particularly gas flow rate, which affects residence time, energy transfer, and competing byproduct chemistry.

This study explores the influence of the air flow rate on …

Enhancing Algae Biofilm Quantity And Value Through Controlled Light Intensity For Treatment Of Municipal Anaerobic Digestor Effluent, Joshua D. Wintch, Ronald C. Sims

Biological Engineering Student Research

Rotating algae biofilm reactors (RABRs) have been shown to remove nutrients from wastewater and to cultivate algae for bioproducts. Another key variable in RABR technology for cultivating microalgae biomass is light intensity. The goal of this study was to address a gap in the design and operation of algae biofilm reactors by analyzing the effects of light intensity on biomass quality and quantity, chemical precipitation of phosphorus, and phosphorus uptake into biomass. This study utilized a triplicate laboratory-scale experiment with PAR intensities from 10 to 2000 µmol m⁻²·s⁻¹. Municipal wastewater anaerobic digester effluent (ADE) was utilized …

Deciphering The Rules Of Odor-Driven Learning In The Fruit Fly Olfactory System, Cole B. Hanan

McKelvey School of Engineering Graduate Student Theses & Dissertations

Odorant identity is encoded by patterns of activity across olfactory receptor neurons (ORNs) and their corresponding glomeruli in the antennal lobe (AL). An odorant's valence can be modified by experience, allowing animals to associate previously neutral odors with appetitive or aversive outcomes. However, some odors appear resistant to such reassignment, and the factors determining whether an odor can acquire learned valence and whether that association generalizes to chemically related odors remain poorly understood. This thesis uses Drosophila melanogaster to address this question using a fully automated proboscis extension reflex (PER) conditioning assay. Odorants are presented via a computer-controlled olfactometer, reward …

Artificial Intelligence Decision Support And Pilot Performance, Aarohi Srivastava

Discovery Day - Daytona Beach

The integration of artificial intelligence (AI) into aviation decision support systems (DSS) introduces new opportunities for pilots. While these systems offer considerable benefits, ensuring safe and optimal human-AI interaction requires further research. In the case of student pilots, trust calibration, system transparency, and appropriate reliance are all factors that influence the operational success of an integrated AI system. The systems are designed with the goal of decreasing cognitive workload, increasing situational awareness (SA), and providing data-based recommendations to help the pilot make quick and accurate decisions. This study will evaluate the effects of disclosed vs undisclosed AI accuracy on student …

Assessing Safety Culture Among Airport Operators Through Stakeholder Perceptions, Bill Deng Pan

Discovery Day - Daytona Beach

The effective implementation of Safety Management Systems (SMS) at airports depends not only on compliance with regulatory requirements but also on the presence of a strong and measurable safety culture. While the Federal Aviation Administration (FAA)’s increasing emphasis on SMS has accelerated adoption across certificated airports, many airport operators, often coming from operational, engineering, or business backgrounds, lack practical methods to assess safety culture in a structured and actionable manner. Existing guidance highlights the importance of safety culture and safety climate. However, limited research exists on how airport stakeholders perceive and experience safety culture within the airport operating environment. This …

Vibration And Thermal-Vacuum Feasibility For Micro Carbon Fiber Filled Nylon Filament Lunar Applications, Andrew Murphy, Shannon O'Sullivan, Daniel Lopez

Discovery Day - Daytona Beach

The proposed work seeks to improve the fundamental understanding of the properties concerning 3-D printing filaments that have potential to be used for lunar applications. The associated properties in focus for the proposed study, vibration and thermal-vacuum-resistance, are fundamental aspects of spaceflight and are critical to mission success for objectives associated with the environmental factors in space. The successful outcome of the proposed work will answer questions relating to the feasibility of micro carbon fiber filled nylon 3-D printing filaments such as Markforged’s Onyx® for application for projects in the Space Technologies Laboratory, including for the development of structures relating …

Actionable Hydrologic Data To Information With National Water Model-Based Derived Dataset, Cutting-Edge Data Services, And Agentic Ai System, Sujan Chandra Mondol

Theses and Dissertations

Hydrologic data are the cornerstone of many complex hydrologic research and operational workflows that produce useful hydrologic information for water resources decision-making, flood risk communication, and water availability implications. The National Water Model (NWM) is a valuable source of hydrologic data, particularly for its extended coverage of unmonitored streams and the large-scale continuity of hydrologic processes. Precomputed secondary datasets derived from this simulated data, such as streamflow indices, can improve operational efficiency through thresholding. Disseminating the data through modern technologies, such as application programming interfaces, is required for ready integration into applications. However, if extraction requires an intermediate service, there …

Apical-Out Lung Organoids: A Platform For Spaceflight And Cf Research, Valeria Jimenez, Ally Schwennesen

Discovery Day - Daytona Beach

A genetic condition known as cystic fibrosis (CF) is brought on by mutations in the CFTR gene, which results in chronic lung inflammation and impaired chloride ion transport. CF bronchial epithelial cells enable direct comparison of disease pathology, while normal human bronchial epithelial (NHBE) cells offer an essential model for researching airway physiology. Realistic modeling of respiratory tissue and its reaction to environmental stressors like microgravity is made possible by the creation of 3D lung organoids from these cells. In this project, we developed apical-out organoids, which expose the apical surface of epithelial cells to the external environment. These organoids …