Digital Commons Network^™

Technology Transfer Between Developed And Developing Countries, Tenny Oghogho Ogbomo

Theses

The problems arising from technology transfer, in general, are not new. The problems of the East-West technology transfer, for example, are based on the risk that such transfers will enhance the military capability, or at least the military potential, of the trading partner. In the case of United States trade with the Soviet Union, it can be said that any accretion in the Soviet military capacity weighs against the United States in an overall world-wide balance of power. The restrictions and/or prohibition of such transfer of technology are problems themselves.

The North-South technology transfer, in other words, the technology transfer …

Thermal Energy Storage Using Phase Change Material With Multi - Melting Temperatures, Christakis Christodoulou

Theses

Three different models are developed in this investigation, for the study of thermal energy storage, using a phase change material with multi-melting temperatures. Using Model B as the basis, the developed partial differential equations are numerically solved by a finite difference method. Two computer programs were written based on that solution, one for the charging mode and one for discharging. Finally, using the computer programs, a set of results was obtained for both charging and discharging, utilizing calcium chloride hexahydrate as the phase change material with constant and multi-melting temperatures.

Replacement Of Surface Ducted Rays Near Caustics With Guassian Beams, Carlos Javier Ruiz

Theses

Conventional approach to a solution of a wave propagation problem in an inhomogeneous medium is to utilize either rays or modes to represent the wave field. Asymptotic ray theory (ART) starts to fail in the vicinity of caustics due to rays experiencing many reflections. Even uniform representations do not properly correct this deficiency of rays when caustics start to pile up in the far range. One possible alternative is to replace these rays with modal bundles and remainders [1]. A promising technique using Gaussian Beams has been used to represent the total field due to a point or a line …

Isoparametric Finite Elements For Axisymmetric Solids, Ramanand R. Shetty

Theses

The finite element formulation of axisymmetric plane stress analysis is used to develop a computer program for numerical implementation. The basic relations used to derive the finite element equations for a solid continum are reviewed in the thesis. The programming organization is summarized and program list is given in Appendix.

The program portion for isoparametric elements are borrowed from Numerical Methods in Finite Element Analysis by K. J. Bathe and E. L. Wilson, and various other subroutines are used from Mr. Huang's thesis on Micropolar elasticity analysis. Mr. Huang's computer program is based on the work done by Dr. Nakamura …

In Vitro Comparative Hydrodynamic Study Of Heart Valve Bioprostheses Under Accelerated Fatigue Conditions And Under Physiological Conditions, Mario Cincinat Iosif

Theses

The present study involves the use of an accelerated fatigue testing system*, and a pulse duplicator (heart simulator)*, to evaluate the hydrodynamic characteristics of cardiac bioprostheses.

The hydrodynamic performance of these prosthetic valves is compared when tested using each machine, in order to assess the determining conditions that exist for each case, and try to correlate them.

Pressure drop and pulsatile flow across valves are measured, using a real-time on-line data acquisition system, which includes, in addition to the fatigue tester and the pulse duplicator, a DC amplifier, an analog-to-digital converter and a digital microcomputer. Special acquisition software has been …

Microcomputer Local Area Network Interface, David W. Juan

Theses

A Microcomputer Local Area Network Interface system for use in the study of Local Area Network has been built and tested. The special feature of the system is data transmission/receiving and error detection/recovery. The system adapted the International Standards Organization (ISO) Open System Interconnection COSI) model. It used the star topology and implemented the physical layer, data link layer and network layer. The results of the system indicated the data communications and resources—sharing between microcomputers.

Laminar Flow In A Porous Pipe With One Plugged End, Pyne-Hwa Ku

Theses

A steady laminar flow through a co-cylinder porous pipe with one plugged end was investigated theoretically to obtain velocity, pressure and shear stress distributions.

An integral momentum equation and the Darcy's law for flow through the porous wall were solved numerically by the Runge-kutta method.

As the fluid is injected from the outer wall into the porous tube, the fluid in the inner tube is accelerated from rest at the plugged end to a fully-developed velocity profile at the exit of the porous tube. It was found that the coefficient of the wall shear stress and the dimensionless pressure drop …

Preparation And Properties Of Monomers Derived From Hydroxyhexyl Methacrylate For Dental Adfesive, Ren-Dar Ku

Theses

Although methacrylic acid is the simplest unsaturated carboxylic acid and its hydroxyl ester polymerize readily, yielding useful resins, no adequate study of the preparation and application of the higher hydroxyl alkyl methacrylates has been published. The commercially important hydroxyethyl and hydroxypropyl methacrylates are manufactured from the appropriate alcohol in the presence of sulfuric acid, a method which appears to be less suitable for production of higher hydroxyl alkyl methacrylates. The purpose of the present work was to prepare the hydroxyhexyl methacrylate (HHMA) by a generally applicable method and determine its common physical properties. In addition, the urethane methacrylates were synthesized …

The Kinetics And Mechanism Studies Of A Polymer Powder Coating On Metal Surface By Cathodic Electrodeposition Process, Wen-Lin Wu

Theses

A polymer dispersion of fluorocarbon with solid constent in the range of 10-25% were prepared from white powder polytetrafluorethylene (PTFE), emulsifier combination of dodecylbenzyldimetlyl sulfonium chloride and Trition N-150, and other components or additives. Such a fluorocarbon dispersion is very stable against coagulation and has a pH in the range of 8-10, which is especially suitable for powder coating purpose.

A new electrocoating technique, which is called cathodic electrodeposition powder coating method, was conducted in this study. This new coating method includes four steps: pretreatment, electrocoating, drying and baking. Two kinds of degreased metal substrates, aluminum and steel plates, were …

The Design Of An Order Processing System, Michael Montrose

Theses

The writer of this thesis was once involved in the order processing function with the company studied and recognized that there is a need for a better method of processing customer orders that could be applicable to other companies.

The company studied is considered a "high tech" company, meaning that it is engaged in the design; manufacture, and sale of the latest state of the art products that employ modern computer technology. It is ironic that this company, on the leading edge in its field; is in great need of reform in the office methods used to order its products. …

A Study Of Hazardous Wastes Generated In New Jersey With Regard To The Siting Of Waste Disposal Facilities In The State, Shreerang Narayan Dharasker

Theses

The effective treatment and disposal of hazardous wastes is one of the most urgent problems facing the State of New Jersey today. New Jersey is the most densely populated state and is a leader in industry. Nearly every major industry in the nation is represented by one or many production units all of which generate copious amounts of hazardous and toxic wastes each year. Although the state has the toughest rules and regulations on the management of hazardous waste, there are very few options exercised or facilities cited for the effective treatment and disposal of wastes within the state boundaries. …

Osmotic And Mean Activity Coefficients Of Cacl2, Nai, Libr And Licl In Ethanol At 50 Degrees C, Gregory J. Czerwienski

Theses

Vapor pressure depression data for CaCl₂, NaI, LiBr, and LiCl were measured at a molality ranging between 0.2-7.5 depending on the solubility of the salt in ethanol. Data were also measured at 35° C for the LiCl. The apparatus used was a recirculation still of the Othmer type.

Osmotic coefficients were calculated from the total pressure of the system. The one parameter Bromley equation and the three parameter Pitzer equation were used to correlate the data. For all the systems, the Pitzer equation correlated the data better as one would expect. Mean activity coefficients were calculated graphically and …

A Closed Form Image Force Function For Deposition Of Particles In A Cylindrical Tube, Hsi-Chung Chiou

Theses

This study investigated the behavior of charged particles suspended in a laminar steady incompressible flow in a cylindrical tube under the influences of image , inertia , viscous and gravitational forces. A new expression for the image force was obtained by introducing an approximate potential energy function. The velocity profiles employed in the analysis were uniform and parabolic.

The governing equations derived were based on Newton's second law of motion and were solved by a Runge-Kutta numerical method. The results were obtained for different values of Q, a dimensionless inertia-charge parameter. For a value of Q equal to zero the …

A Research Study To Determine The Characteristics And Attitudes Shared By Entrepreneurs And Intrapreneurs And The Similarities And Differences Between Them, Miguel A. Vargas

Theses

The United States of America has been the mecca of many ventures for people with vision, goals and perseverance. The prosperity of our nation has been paved by individuals with great ambition, determination and insight, who have dared to take on a risk in owning a business enterprise.

This research study was conducted to determine the characteristics and attitudes of both entrepreneurs and intrapreneurs, as well as the similarities and differences between them.

For this study, a survey of entrepreneurs.was conducted through the use of questionnaires distributed to business owners located in the counties of Essex, Passaic and Hudson, in …

Infiltration Into Decomposed Granite Soils; Numerical Modeling, Applications And Some Laboratory Observations, A. W. Jayawardena, Jagath J. Kaluarachchi

Civil and Environmental Engineering Faculty Publications

This paper describes the outcome of a study on rain infiltration into decoposed granite which is one of the two main types of soils found in Hong Kong. It consists of the development and verification of a finite element based numerical model which has general applicability for flow through unsaturated porous media, application of the model for predicting moisture movement in an artificial slope made out of reconstituted decomposed granite and some laboratory observations including the estimation of soil hydraulic parameters.

Comparison Of Four Infiltration Models In Characterizing Infiltration Through Surface Mine Profiles, Larry G. Wells, A. D. Ward, I. D. Moore, R. E. Phillips

Biosystems and Agricultural Engineering Faculty Publications

A laboratory infiltrometer system was used to evaluate the infiltration process through reconstructed surface mine profiles. Six different profiles were subjected to constant simulated rainfall intensities for selected test conditions. Surface runoff rates were monitored and transient soil moisture contents in the profiles were measured with a gamma density gauge. Unsaturated hydraulic conductivity relationships were determined using Campbelfs method and the "zero-flux" procedure. The infiltration process was modeled by the SCS curve number method, a form of Holtan's equation, the Green-Ampt model and Richards' equation. SCS curve numbers were determined by fitting the method to the observed results. Richards' equation …

Clostridium Perfringens: An Adjunctive Indicator In Nonpoint Pollution, Steven G. Eberl

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Clostridium perfringens (CP) was evaluated as an additional indicator in assessing impacts and sources of microbial pollution in the Idaho-Utah Cache Valley. Point, nonpoint, river water, and animal fecal samples were analyzed for CP, total coliforms, fecal collforms, and fecal streptococci.

Monthly river samples consistently contained < 20 CP/100 mL, but concentrations of the other indicators varied significantly by location and date. Two sample stations consistently had CP concentrations greater than 20/100 mL. One of these stations was influenced by an upstream wastewater discharge. Chlorinated effluent from this trickling filter plant contained greater than 10³ CP/100 mL, but met a 400 FC/100 mL discharge standard. A consistent decrease in CP concentrations in samples taken downstream from this wastewater source were found, despite significant impact from adjacent nonpoint pollution. Lagoon and oxidation ditch wastewater effluents sampled contained < 20 CP/100 mL.

Nonpoint sources sampled (e.g., cattle feedlot runoff) contained < 20 CP/100 mL and 10²-10⁴/100 …

The Vertical Distribution Of Salts In A Soil Profile During The Drainage Process, Adel Taha Yassin

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this study was to develop a model to predict water extraction patterns and therefore salt distribution patterns in a one dimensional homogeneous soil profile for a specified root distribution.

Water extraction was simulated as a function of the total potential and the root density at any level of the profile.

Salt redistribution caused by irrigation was simulated by assuming a partial and proportional displacement of the water in each soil layer.

A computer program was written for the model in Fortran language and implemented on the Vax. To evaluate the performance of the model, test studies were …

Irish H & V News

Building Services Engineering

No abstract provided.

Spring 1986, Wmpg 90.9 Fm

WMPG Program Guides

WMPG program guide for Spring 1986

Includes notes from Program Director, information on shows and events, and schedule.

Spring 1986, 90.9 Wmpg Fm

WMPG Program Guides

Trifold, light blue, Spring 1986

Two And Three-Dimensional Isoparametric Finite Elements For Axisymmetric Micropolar Elasticity, Fuang-Yuan Huang

Dissertations

Finite element analysis program for isotropic and orthotropic axisymmetric micropolar (Cosserat) elastic solids are developed in this thesis. Isoparametric elements of 8- and 20- node are used to solve general three-dimensional problems, arid both 4- and 8-node elements are used for two-dimensional cases. Three-dimensional finite element formulation for cylindrical coordinate system is derived. Corresponding Fortran programs are then developed. Patch tests are performed for two-dimensional cases to verify the applicability of the finite element method to non-rectangular geometries. Several two-dimensional and three- dimensional problems for micropolar elastic solids are solved to verify the formulations arid computer program.

Good agreements were …

Irish H & V News

Building Services Engineering

No abstract provided.

Erosion Of Yellow Brass And Type 304 Stainless Steel In A Gas Blown Spark Gap, Rakasi Madhava Reddy

Mechanical & Aerospace Engineering Theses & Dissertations

Erosion rates of yellow brass and type 304 stainless steel electrodes were studied in air under pulse discharge conditions at a voltage of 100 kV, a current of 20 kA, and pulse durations of 70 ns. Anodes and cathodes, configured vertically, were fitted with removable hemispherical tips having a diameter of 0.95 cm and a mass of 3 gm. Tests were conducted inside a low speed, high pressure wind tunnel at pressures of 30 and 50 psig and air velocities ranging from 0 to 36 nm/s.

Erosion was studied gravimetrically for several flow velocities. As many as 60,000 discharges were …

Use Of Clay As A Landfill Liner, Mayur B. Desai

Theses

The purpose of this thesis is to study the factors affecting efficient functioning of clay material for containment of landfill materials. The study of liner-leacheate interaction is done from the consolidation and vane shear tests on various clays having different activities, and chemicals that are typically found in a municipal solid waste leachate and a leachate collected from an active landfill.

An effort was made to study the use of Atterberg limits to predict the suitability of a clay as a landfill liner for a given waste environment. The study indicates that there is a decrease in permeability of bentonite …

Identification Of Material Constants Of Human Bone Using Finite Element Method For Micropolar Elasticity, Sajid Mannan Sayed

Theses

Bone differs from most engineering materials in the composition of its structure. The classical theory of elasticity fails to correctly predict the stress concentration effects in bones with precracked or notched surfaces, and can be applied only to those materials which exhibit more homogeneity and isotropicity than bone. Therefore, generalized continuum theories, which have addditional degrees of freedom, must be used to determine the stress concentration effects in human bone, especially in regions of high strain gradient, such as a hole or an interface.

In this thesis, efforts have been made to identify the material constants of human bone since …

The Impact Of Fms On Batch Production Processes, Jan-Sheau Ho

Theses

A Flexible Manufacturing System (FMS) is an integrated system of combining metalcutting and other processes with materials handling under computer control. With computer control, FMS is capable of processing a variety of different types of workpieces simultaneously. FMS is an approach towards a balancing of high output on the one hand and great flexibility on the other hand. FMS stands as a new technology to improve the productivity of mid-volume, mid-variety production; therefore the manufacturing world will soon feel the impact of FMS.

This thesis attempts to specify what FMS is and how it works, the influence of FMS on …

Finite Element Analysis Of The Prosthetic Acetabular Region, Katkuri Venkat Rammanohar Reddy

Theses

Femoral component loosening and prosthetic stem fractures have renewed interest in conservative alternatives to conventional total hip replacements. The objective in this study is to get interfacial stresses of a acetabular surface replacement cup. This is done by performing finite element analysis of the model. A solid three - dimensional model with a grid of 3D isoparametric solid elements is generated using ANSYS, a powerful finite element analysis package. The stiffness is considered to be linearly proportional to the stress in the acetabular region. The stresses are determined by performing iterative finite element analysis. Stresses arp computed using two different …

Digital Signal Processing On Tms32010 Evaluation Module And Analog Interface Board, Jiming Sun

Theses

The TMS32010 Evaluation Module (EVM) and Analog Interface Board (AIB) have been used to implement a digital signal processing system. This new system will be the hardware basis for research and development in the DSP field at NJIT in the future. This thesis will serve as a user's guide and overall technical manual for the system.

TMS32010 Assembler, Linker and Simulator in VAX-11 are used to develop the system software, then we can down load the object codes to the EVM through the MODEM in order to test them. By using the A/D and D/A converter as input and output …

Summer 1986, 90.9 Wmpg Fm

WMPG Program Guides

"Alternative music to soothe the savage soul"