Digital Commons Network^™

Intravital Microscopic Evidence That Polylactide-Polyglycolide (Plga) Delays Neo-Osteogenesis And Neo-Angiogenesis In Healing Bone, H. Winet, J. O. Hollinger

Cells and Materials

The bone chamber implant (BCI) has allowed monitoring a healing bone defect as well as the effect of an eroding implant on the healing process. The BCI is a useful tool and intravital microscopy a valuable technique for obtaining quantitative data chronicling osseous wound healing. The physiological parameters that form the initial data base documenting healing are neo-osteogenesis and neo-angiogenesis. This review compares and characterizes osseous wound healing in a BCI loaded with an erodible copolymer, PLGA (polylactide-polyglycolide). To determine if a statistically significant deviation from normal healing had occurred, the results were compared with present and historical controls. In …

Transport Of Co2+ In A Physically And Chemically Heterogeneous Porous Medium, Mark L. Brusseau, John M. Zachara

United States Department of Energy: Publications

The fate of radionuclides in the subsurface is of critical importance to the planning, siting, and evaluation of repositories for radioactive wastes. Mathematical models are an integral component of this process. An accurate understanding of radionuclide transport is required to successfully formulate and use these models. It is well-known that the subsurface is both physically and chemically heterogeneous. Recent research has shown that the resultant spatial variability of hydraulic conductivity and of sorption capacity can significantly affect solute transport in the subsurface. The impact of hydraulic conductivity variability and sorption capacity variability on the transport of radionuclides is, therefore, of …

Industrial Agricultural Products Center Review 1993

Industrial Agricultural Products Center: Publications and Information

Significant progress has been made toward the goals of the Center. Activities have centered on the identification of opportunities in terms of new industrial uses of agricultural commodities. Assistance has been provided to UNL faculty to procure funding research in the respective areas. In other cases, specific faculty positions have been identified. Subsequent hirings have built a strong group of faculty affiliates.

The main emphasis in the Center has been research on developing new processes and products. A fairly comprehensive list of projects funded and the faculty involved are listed in a subsequent section. Two strategic planning sessions have been …

The Removal Of Lead-Based Paint From Steel Bridges, Theodore Hopwood Ii, Christopher M. Oberst

Kentucky Transportation Center Research Report

The purpose of this study was to assist the Department of Highways in conducting bridge-painting operations involving removal of existing lead-based paint. Pertinent state and Federal regulations affecting generation of hazardous wastes, limiting environmental pollution and protecting public and worker safety were obtained and reviewed.State highway agendas were surveyed relative to how they conducted maintenance bridge painting involving lead-based. paints and comply with applicable regulations. Information from the painting industry related to sale removal of lead-based paints was also reviewed.

Based upon the reviews of applicable regulations, operations of other state highway agencies and painting industry practices, the best demonstrated …

Doctoral Program Computing Technology In Education 1993-1994, Nova Southeastern University

College of Engineering and Computing Course Catalogs

No abstract provided.

Real-Time Admission Control Algorithms With Delay And Loss Guarantees In Atm Networks, Apostolos Dailianas, Andreas D. Bovopoulos

All Computer Science and Engineering Research

A multimedia ATM network is shared by media streams with different performance requirements. For media streams such as file transfers, the preservation of bursts and the provision of guarantees for loss probability at the burst level is of primary importance, while, for media streams such as voice, loss guarantees at the cell level are sufficient. Continuous media have stringent delay jitter requirements. Finally, some applications require loss-free transmission. In this paper, the first complete traffic management scheme for multimedia ATM networks is introduced. The traffic management scheme supports four different classes of traffic, each of which has different performance requirements …

Large Capacity Missile Carrier (Cmx), C. N. Calvano, J. M. Berner, J. M. Bradley, K. A. Tosiello, D. T. Hooker, C. F. Merrill

Engineering Management & Systems Engineering Faculty Publications

A systems engineering approach to the development of a radically different kind of surface combatant ship is presented, followed by a preliminary design of the ship shown by the analysis to be most effective. The requirement for the project was the development of a ship which would provide a major increase in the missile firepower of a battlegroup. The study conducts an analysis of four warfare scenarios and evaluates the effectiveness of replacing some Aegis ships with the missile carrier (CMX) and examines the relative utility of varying missile loads for the CMX. An alternative is chosen for further development …

Design And Construction Of Maintainable Knowledge Bases Through Effective Use Of Entity-Relationship Modeling Techniques, William Yancey Pike

Retrospective Theses and Dissertations

The use of an accepted logical database design tool, Entity-Relationship Diagrams (E-RD), is explored as a method by which conceptual and pseudo-conceptual knowledge bases may be designed. Extensions to Peter Chen's classic E-RD method which can model knowledge structure used by knowledge-based applications are explored. The use of E-RDs to design knowledge bases is proposed as a two-stage process. In the first stage, and E-RD, termed the Essential E-RD, is developed of the realm of the problem or enterprise being modeled. The Essential E-RD is completely independent of any knowledge representation model (KRM) and is intended for the understanding of …

Decision-Support Tools For Transferring Am/Fm/Gis To Small Communities, Steven W. Mccrary, Colin Othniel Benjamin, Peter J. Schmidt

Engineering Management and Systems Engineering Faculty Research & Creative Works

This paper examines several decision-support tools for transferring AM/FM/GIS technology to small communities. The term Computer-Assisted Spatial Information Systems (CASIS) provides a basis for a systematic categorization and definition of AM/FM/GIS systems that will serve to enhance small communities' understanding of these technologies for future decisions. The acronym CASIS includes such areas as database-management systems, automated mapping/facilities management/geographic information systems (AM/FM/GIS), and computer-aided drafting (CAD). Further, this paper reports the highlights of a survey that assesses the theory-practice gap in AM/FM/GIS usage among very small local government agencies. The survey uncovered an existing theory-practice gap: A, slow rate of system …

Consumption And Loss Of Formaldehyde In Electroless Copper Plating, Peter John F. Sutch

Retrospective Theses and Dissertations

The objectives of this research were to quantify formaldehyde consumption due to plating and parasitic reactions and determine the magnitude and distribution of formaldehyde losses from the electroless copper plating process. Plating and rinse bath samples obtained from three electroless copper plating operations were analyzed for formaldehyde and copper in order to develop a mass balance analysis about the plating bath for periods of active production and no production. Fugitive air and stack releases of formaldehyde were estimated using emission factors developed from air sampling at the three facilities. It was determined that approximately 90% of the formaldehyde added to …

Weapon System Integration For The Afit Virtual Cockpit, William E. Gerhard Jr.

Theses and Dissertations

The Air Force Institute of Technology is continuing research in the Virtual Cockpit. The Virtual Cockpit makes use of high performance graphics workstations, Virtual Environment technology, and Distributed Interactive Simulation network protocols to create a flight simulator based on the capabilities of the McDonnell Douglas F-15E Strike Eagle. The work presented in this thesis focuses on the design and implementation issues for integrating a weapons delivery capability. Weapons simulated include: RADAR and IR guided air- to-air missiles, gravity and precision guided bombs, and a 20mm cannon. Virtual Environment displays used include: color NTSC and monochrome high resolution helmet mounted displays …

Pump And Signal Cross Saturation In Cw Dye Lasers, Lee W. Casperson, A. C. Wilson, W. J. Sandle

Electrical and Computer Engineering Faculty Publications and Presentations

It is well known that the signal output intensity from a dye laser oscillator depends directly on the pump intensity. The opposite effect, the dependence of the transmitted pump intensity on the signal intensity, is studied in detail. The theoretical results are compared with experimental data obtained using an argon‐laser‐pumped rhodamine 6G dye laser.

Surface Treatment For Mitigation Of Hydrogen Absorption And Penetration Into Aisi 4340 Steel, G. Zheng, Branko N. Popov, Ralph E. White

Faculty Publications

The effectiveness of underpotential deposition of Pb onto a membrane made of AISI 4340 steel on the reduction of the hydrogen evolution reaction on the membrane and the degree of hydrogen ingress into the membrane was determined. In the presence of a monolayer coverage of Pb on the membrane surface, the hydrogen evolution currents were reduced by a factor of two compared with the values obtained on bare steel, and the steady-state hydrogen permeation flux through the steel membranes was reduced by 71%.

Impedance Analysis For Oxygen Reduction In A Lithium Carbonate Melt: Effects Of Partial Pressure Of Carbon Dioxide And Temperature, Bhasker B. Dave, Ralph E. White, Supramaniam Srinivasan, A. John Appleby

Faculty Publications

Effects of partial pressure of carbon dioxide and temperature on oxygen reduction kinetics on a gold electrode in a lithium carbonate melt were examined using electrochemical impedance spectroscopic (EIS) and linear sweep voltammetric techniques. The impedance spectra were analyzed by a complex nonlinear least squares method, using the Randles-Ershler equivalent circuit model, to determine the electrode-kinetic and the mass-transfer parameters such as the charge-transfer resistance and the Warburg coefficient. The cyclic voltammetric measurements indicated that the oxygen reduction process in lithium carbonate melt is "reversible" up to 200 mV/s. The product DC₀ determined by cyclic voltammetry agreed well …

Thermal Analysis Of Spirally Wound Li/Bcx And Li/Socl2 Cells, E. E. Kalu, Ralph E. White

Faculty Publications

A thermal analysis of Li/BCX and high rate Li/SOCl₂ cells is presented. The thermal model developed was used to study the effect of ambient temperature of discharge (0–40°C) on Li/BCX cells discharged at the same rate. The model predictions show that ambient temperature of discharge was critical in thermal management of the cell. For forced convection cooled cells, the model predicted that ambient temperature near room temperature (25°C) was required to achieve the lowest maximum temperature rise in the cell. Inclusion of the effects of reaction products to the model predictions showed that a constant composition assumption may be …

Ultrashort‐Pulse Propagation In Dye Laser Amplifiers, Shuanghua Jiang, Lee W. Casperson

Electrical and Computer Engineering Faculty Publications and Presentations

A semiclassical model is presented for ultrashort‐pulse dye laser amplifiers. The model permits a discussion of important aspects of short‐pulse amplification such as pulse shape, pulse energy, and gain saturation. Coherence effects are found to be important in characterizing the evolution of amplified pulses in the subpicosecond and femtosecond regimes. The results are compared with those obtained using the corresponding rate equation model.

Computer Methodology For Transportation Agencies To Screen Technologies For Hazardous Waste Remediation, William J. Grenney, Ravi Kumar Penmetsa

Reports

Executive Summary: Many pathways exist for transportation agencies and other public and private agencies to become responsible for sites contaminated by hazardous wastes. As a reult, agencies frequently face a multitude of lega, regulatory, financial, technical, and health risk problems. When transportation agencies become involved in the remediation of hazardous waste sites, the common practice is to hire consultants and contractors for the clean up process. Because the field of hazardous waste site remediation is changing so rapidly, agency personnel evaluating the consultant's recommendations need to ahve access to the most recent regulatory and remediation information. Early stages of the …

Interpretation Of Drill Log Data: Dlog3d - A Probabilistic Tool For Analyzing Subsurface Soil Variability, Alaa El-Din Ali, Upmanu Lall

Reports

Groundwater contamination potential is directly related to the location of zones of high hydraulic conductivity. Sedimentary depositional environments can be quite complex. Pockets of sand of varying thickness and orientation may be scattered over the aquifer. A contaminant pathway can esist where these pockets or lenses are interconnected. Aquifer pump tests do not provide useful information on the occurrence of such lenses. Drill log data directly sample the soil, but may represent very local sections of the aquifer, and are of relatively poor quality. Here we present a methodology (DLOG3D) that allows a probabilistic interpretation of drill log data that …

Symphony: A Hardware, Operating System, And Protocol Processing Architecture For Distributed Multimedia Applications, Andreas D. Bovopoulos, R. Gopalakrishnan, Saied Hosseini

All Computer Science and Engineering Research

This paper explores the architectural requirements for computers to be able to process multimedia data streams such as video and audio. The I/O subsystem is shown to be a bottleneck, and a network backplane approach is suggested to alleviate this. The need to provide end-to-end performance guarantees requires predictable performance of intra-machine communication, and a schedulable bus with reservation is proposed to achieve this. In addition this requires operating system (OS) mechanisms to negotiate and enforce QoS requirements of applications. A real-time microkernel executive is proposed for each autonomous unit. Requirements for real-time microkernel exeutive is proposed for each autonomous …

Analog Chips And Intelligent Vehicles, J. G. Harris

Electrical and Computer Engineering Faculty Research & Creative Works

Numerous digital-based sensor systems have been demonstrated on intelligent vehicles but only the most rudimentary experiments have been attempted with analog VLSI chips in real-world environments. The most significant factor in the choice between analog and digital approaches to sensory processing in intelligent vehicles will be the cost of mass production. If analog sensors can be designed with enough speed, resolution and accuracy to solve sensory processing tasks, then the low-cost of mass production ensures that analog circuits will be the technology of choice for future generations of smart sensors. Current analog VLSI sensors do not have enough resolution and …

Emc Applications Of Emap-2: A 3d Finite Element Modeling Code, Todd H. Hubing, M. Ali

Electrical and Computer Engineering Faculty Research & Creative Works

EMAP-2, a 3-D finite element modeling code that can be used to model simple printed circuit board configurations, is discussed. It is a true full-wave field solver designed to be used for education or research. EMAP-2 is written in the C programming language. The code, its capabilities, and its limitations are described. Two examples illustrate how the code can be applied to problems of particular interest to EMC (electromagnetic compatibility) engineers.

Galvanic Stripping Of Fe⁺³ And Pb⁺² Ions And Dissolution Of Metallic Fe, Zn, Pb And Cd Using Di(2-Ethylhexyl)Phosphoric Acid, Luis Miguel Chia Aquije

Doctoral Dissertations

"Two systems were evaluated using the principles of the galvanic stripping process. One of them, the removal of Pb⁺² ions from di-2(ethylhexyl) phosphoric acid (D2EHPA) was performed using metallic zinc. The other, the removal of Fe⁺³ ions from D2EHPA used metallic iron as reductant and was performed simultaneously with the organic phase using a slightly acidic aqueous solution of hydrochloric acid. In addition, the dissolution of metallic zinc, iron, lead, and cadmium in D2EHPA was studied in order to better understand the anodic step in the mechanism of the galvanic stripping process.

Increased temperature was found to dramatically …

Permeation Of Several Gases Through Elastomers, With Emphasis On The Deuterium/Hydrogen Pair, M. (Mark) W. Fitch, W. J. Koros, R. L. Nolen, J. R. Carnes

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Diffusion and Permeation Coefficients for He, H2, D2, O2, and N2 in a Variety of Elastomers Were Measured by Simple Manometric Methods. the Elastomers Studied Were Butyl Rubber; Hypalon® 40 and 45; Viton® E60 and GF; Hydrin® 100 and Filled Hydrin® 100; Kraton® G, FG, and KG VTEOS; EPDM; Epoxidized Natural Rubber; and Neoprene. Consistent with Earlier Studies, Elastomers with Higher Glass Transition Temperatures Exhibited Lower Diffusion Coefficients. the Ratio of Diffusion Coefficients of the Hydrogen Isotope Pair Differed from the Purely Molecular‐weight‐based Prediction. Deuterium's Slightly Smaller Size Relative to Hydrogen is Consistent with Observed Deviations from the Molecular‐weight‐based …

Mineralization And Uptake Of Triazine Pesticide In Soil-Plant Systems, Dhileepan R. Nair, Joel G. (Gerard) Burken, Louis A. Licht, Jerald L. Schnoor

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Deep-Rooted Trees Planted as a Buffer Zone Can Intercept Runoff and Eroded Sediments, Thus Reducing Non-Point-Source Pollution Due to Agricultural Chemicals. in This Study, Populus Sp. Were Grown in Bioreactors with an Agricultural Soil (Silt-Loam) and in a Silica-Sand Media; Both Were Spiked with ¹⁴C Uniformly Ring-Labeled Atrazine. the Plants Took Up over 11% of the ¹⁴C Labeled Atrazine Applied to the Silt-Loam Soil and over 91% of that Applied to the Silica Sand Media, with the Majority of the ¹⁴C Accumulating as Nonphytotoxic Metabolites in the Leaves. Research Suggests that, in Addition to Nutrient Uptake, Poplar …

Assessment Of Environmental Implications Of Abandoned Oil And Gas Wells, Donald L. Warner, Cary L. Mcconnell

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

A detailed study was made of the potential for abandoned oil and gas wells in the Lower Tuscaloosa sand of Mississippi and Louisiana to act as conduits for movement of saline water from the Lower Tuscaloosa into underground sources of drinking water (USDW's). Finite-difference numerical modeling determined the extent that water might be forced from the Lower Tuscaloosa sand into a USDW as a result of injection into the Lower Tuscaloosa. Within the range of conditions modeled, water from the Lower Tuscaloosa never traveled into a USDW. On the basis of the modeling, we concluded that it is unlikely that …

Hysteresis And Anchoring Energy In Ferroelectric Liquid Crystals, Yuri Panarin

Articles

The frequency dispersion of the coercive force of Ferroelectric Liquid Crystals (FLC) cells has been detected and examined in the range of infralow (lower than 0.1 Hz) frequencies. To clarify the low-frequency dispersion, the model has been suggested, based on the arrangement of free charges and well describing the experimental curves. The method for determination of the energy of FLC anchoring at the surface, developed on the basis of the static hysteresis loop, has been proposed. The dependence of bistability and the anchoring energy upon the orientant layer thickness has experimentally been investigated.

A Comparison Of Minority And Non-Minority Engineering Students On Selected Personality And Program Variables, Thomas Mercer Collier Jr.

Theses and Dissertations in Urban Services - Urban Education

The purpose of this study was to investigate whether there are common characteristics associated with 226 Hispanic, African American, and White engineering students who persist at predominantly White colleges and universities. A personality profile of minority and non-minority engineering students was developed. Information regarding factors influencing choice of major, university, study, work and extracurricular involvement, possible reasons for withdrawal from college, awareness and satisfaction with student support services and selected academic courses was also compiled. Components of Minority Engineering Programs (MEPs) which are most used or valued by minority engineering students were identified.

Analysis of Variance identified four of the …

Lattice Boltzmann Thermohydrodynamics, F. J. Alexander, S. Chen, J. D. Sterling

Business and Information Technology Faculty Research & Creative Works

We introduce a lattice Boltzmann computational scheme capable of modeling thermohydrodynamic flows of monatomic gases. The parallel nature of this approach provides a numerically efficient alternative to traditional methods of computational fluid dynamics. The scheme uses a small number of discrete velocity states and a linear, single-time relaxation collision operator. Numerical simulations in two dimensions agree well with exact solutions for adiabatic sound propagation and Couette flow with heat transfer. © 1993 The American Physical Society.

Utilizing Instructional Design Constructs To Enhance Computer-Based Instruction In Air Traffic Controller Training, Theodore Scott Rhoads

Master's Theses - Daytona Beach

This study demonstrates that a computer-based instructional design format is appropriate for novice air traffic control (ATC) training. The computer presents the student with small amounts of information in tutorial and drill and practice sequences that necessitate student interactivity. The student is then periodically audit tested to ascertain mastery of the subject matter. The result of these mid-lesson evaluations serve as a self-check so that the student can assess his/her progress in the learning cycle. The systematic design of instruction and interactive approach to learning, enhances student motivation, improves learning and retention, while placing the responsibility of achieving specific learning …

Acuta Enews December 1992, Vol. 21, No. 12

ACUTA Newsletters

In This Issue

Regulatory update

President's column

Dual routing protects Duke

Talking clock "tells" time

Seminar ratings

Director's column