Digital Commons Network^™

Consulting To Avoid Kessler, Madison Walker

Space and Defense

The consultation obligation of Article IX from the Outer Space Treaty may be used to create a framework for sharing space situational awareness data, globally, with the intention of facilitating enduring coordination agreements for collision avoidance.

Space And Defense Volume 15 No. 1 Spring 2024 (Whole Issue), Space And Defense

Space and Defense

No abstract provided.

Effect Of Flow Velocity On Clogging Induced By Coal Fines In Saturated Proppant Packs: A Transition From Surface Deposition To Bridging, Fansheng Huang, Fengbin Wang, Shuxun Sang, Shiqi Liu, Zhenjiang You

Research outputs 2022 to 2026

Hydraulic fracturing is a widely used technique to enhance the production of coalbed methane reservoirs. However, a common issue is the invasion of coal fines into proppant packs, leading to pore clogging and reduced conductivity. This study investigated the impact of flow velocity on clogging by coal fines in saturated proppant packs to optimize the flow velocity and alleviate clogging during dewatering. Clogging experiments induced by coal fines were conducted on saturated proppant packs with varying superficial velocities. Throughout each experiment, the permeability and effluent concentration were monitored, and the process of clogging was visually observed using an optical microscope. …

Deep Integration Of Technological Innovation And Industrial Innovation In Modern Industrial System: Inspiration From Global New Generation Lithography Systems, Jiang Yu, Feng Chen, Yue Guo

Bulletin of Chinese Academy of Sciences (Chinese Version)

Utilizing technological innovation to lead the construction of a modern industrial system is a strategic choice for seizing the opportunities of the new round of technological revolution and industrial transformation. It is also a necessary step for winning the strategic initiative towards high-level self-reliance and self-improvement. Technological innovation is the intrinsic driving force behind industrial innovation, and industrial innovation is the value embodiment of technological innovation. The deep integration of technological innovation and industrial innovation is the key to constructing and improving a modern industrial system. Taking the global extreme ultra-violet (EUV) lithography system as an example, based on the …

Developing And Testing Low-Cost Air Cleaners For Safer Spaces During Wildfires, Brett W. Stinson, Elliott T. Gall

Mechanical and Materials Engineering Faculty Publications and Presentations

Air cleaning reduces indoor exposure to fine particulate matter (PM2.5) during wildfire smoke events. However, resource and cost constraints may limit access to air cleaning during such an event, as both commercial devices and the higher-rated MERV filters that do-it-yourself (DIY) assemblies typically rely upon tend to be expensive and in short supply. With these constraints in mind, we developed and evaluated several configurations of a novel, DIY air cleaner that uses common household fabrics as filtration media. Clean air delivery rates (CADRs) of the devices were experimentally evaluated in two ways: first, with independent measurements of flowrates and single …

Energy Safety Management: A Training Model To Improve Flight Safety, Juan R. Merkt, Matthijs H. J. Amelink, David G. Sizoo

Journal of Aviation Technology and Engineering

Failing to properly manage an airplane’s energy state can be unforgiving. Mismanagement of mechanical energy (altitude and/or airspeed) is a contributing factor to three common types of fatal accidents in aviation: loss of control in flight, approach and landing accidents, and controlled flight into terrain. Recognizing the importance of energy management, the Federal Aviation Administration has incorporated new elements into the Airman Certification Standards, emphasizing knowledge of energy management concepts and the consequences of mishandling an airplane’s energy state. Unfortunately, no adequate guidance has been available in terms of defining key energy management concepts or suggesting how these should be …

Direct Evaporative Cooling For Sustainability And Environmental Conservation, Hesham Safwat, Iman El-Mahallawi

Mechanical Engineering

This work presents the results of experimental work on cellulose cooling pads with honeycomb structure to study their evaporative cooling effect which is one of the partial solutions for achieving the SDG goals 2030. The paper outlines vari ous types of evaporative cooling materials, highlighting their distinctions and potential applications. Furthermore, it offers a comparative analysis of the cooling effects between wide hole and narrow hole cellulose cooling pads, both individually and in combination. The experimental setup results are thoroughly examined to provide insights into the performance of the cooling pads. Results showed up that direct evaporative cooling have a …

Development And Evaluation Of An Expedited System For Creation Of Single Walled Carbon Nanotube Platforms, Ivon Acosta Ramirez, Omer Sadak, Wali Sohail, Xi Huang, Yongfeng Lu, Nicole M. Iverson

Department of Electrical and Computer Engineering: Faculty Publications

Single-walled carbon nanotubes (SWNT) have a strong and stable near-infrared (nIR) fluorescence that can be used to selectively detect target analytes, even at the single molecule level, through changes in either their fluorescence intensity or emission peak wavelength. SWNTs have been employed as NIR optical sensors for detecting a variety of analytes. However, high costs, long fabrication times, and poor distributions limit the current methods for immobilizing SWNT sensors on solid substrates. Recently, our group reported a protocol for SWNT immobilization with high fluorescence yield, longevity, fluorescence distribution, and sensor response, unfortunately this process takes 5 days to complete. Herein …

Examining The Oxidation States Of Metals In Aerosols Emitted By Electronic Cigarettes, Kashala Fabrice Kapiamba, Stephen Yaw Owusu, Yangtao Wu, Yue-Wern Huang, Yi Jiang, Yang Wang

Biological Sciences Faculty Research & Creative Works

Electronic cigarettes (ECs) emit many toxic substances, including metals, that can pose a threat to users and the environment. The toxicity of the emitted metals depends on their oxidation states. Hence, this study examines the oxidation states of metals observed in EC aerosols. X-ray photoelectron spectroscopy analysis of the filters that collected EC aerosols identified the oxidation states of five primary metals (based on surface sample analysis), including chromium(III) (close to 100%) under low power setting while a noticeable amount of chromium(VI) (15%) at higher power settings of the EC, and copper(II) (100%), zinc(II) (100%), nickel(II) (100%), lead(II) (65%), and …

Ready, Set, Grow: From Micelles To Giant Vesicles Via Biocatalytic Activation, Nicholas P. Bair, Qinyu Zhu, Bryon A. Staynings, Douglas R. Tree, Walter F. Paxton

Faculty Publications

Controlling physicochemical processes that drive changes in supramolecular aggregates is an important objective toward creating artificial soft micro- and nanomachines. Previous research explored the morphology control of membrane-based materials subjected to externally imposed chemical stimuli. Here, we modulate the microscale morphology of pH-responsive assemblies by using biocatalysis to internally generate changes in global pH. Catalytic reactions offer flexibility in the mechanism and rate at which stimuli are introduced to responsive assemblies, ultimately enabling precision and control over size and morphology. We observed, by dynamic light scattering and fluorescence microscopy, substantial microscale differences between assemblies subjected to manually titrated pH changes …

Green Facade Strategy To Mitigate Heat Islands, Arch. Aya Gamal Abdel Hamid Muhammad Prof. Mai Wahba Madkour... Dr. Rania Elghamry Ashmawy Tolba Elakab

Journal of Engineering Research

In the beginning of the twentieth century and the occurrence of the economic crisis that accompanied by a climate crisis, that one of its indicators the rise in temperatures and the formation of hot zones, especially in crowded cities, including Cairo in particular, as it is considered one of the crowded cities in the world, and this noticeable rise in temperatures in Some areas where hot zones form are called heat islands. This results because of the nature of the urban environment, which has a high building density, little natural landscape, and human and industrial activities that has a negative …

Light Structure Building Technology Towards Sustainable Environmental Design, Sally El-Sayed Prof. Dr. Mai Wahba Madkour2, Prof. Dr. Marwa Ahmed Kamer El-Dawla3

Journal of Engineering Research

The building and construction industry is one of the most important sectors globally , as it plays a vital role in providing housing and infrastructure that meets the needs of various communities , However , this industry is considered one of the largest contributors of negative environmental impacts in terms of consuming huge amounts of natural resources in an unsustainable manner and a subsequent increase in energy consumption .Therefore, it was necessary to find solutions and explore for new and sustainable construction methods to alleviate these problems .This research paper will focus on the use of light buildings and their …

Towards Green Cities As An Approach To Achieve Climate Change Adaptation, Noha H. Hefnawy Nouran M. Ibrahim

Journal of Engineering Research

Climate change is a complicated problem and there is an urgent need for climate change adaptation. Cities are the primary drivers of social, economic, and technical progress. Green Cities are cities that show high environmental performance relative to adapting risks derived from climate change while maximizing the economic and social co-benefits. The Authors adopted a data collection strategy to review the issues, and difficulties caused by climate change and how green cities could assist in addressing them, then adopted a case study analysis to analyze the strategies used by Sharm El Sheikh in the transition to green city. The study …

Improving Home Designs For Disease Prevention In Gated Communities And Satisfying Living Space Needs In Egypt: A Post-Pandemic Living Assessment, A. Moustafa Kamel Neveen Youssef Azmy, Shahira Sharaf Eldin

Journal of Engineering Research

Abstract Pandemics such as SARS and COVID-19 have highlighted the importance of preventing and controlling diseases. Virus transmission in residential buildings, especially multi-unit apartment complexes, has prompted calls for innovative housing designs. While Western countries prioritize physical and mental health in residential building design, China focuses on comfort, aesthetics, appearance, and lifestyle.

Optimized Gadolinium-Do3a Loading In Raftpolymerized Copolymers For Superior Mr Imaging Of Aging Blood–Brain Barrier, Hunter A. Miller, Aaron Priester, Evan T. Curtis, Krista Hilmas, Ashleigh Abbott, Forrest Kievit, Anthony J. Covertine

Department of Agricultural and Biological Systems Engineering: Faculty Publications

The development of gadolinium-based contrast agents (GBCAs) has been pivotal in advancing magnetic resonance imaging (MRI), offering enhanced soft tissue contrast without ionizing radiation exposure. Despite their widespread clinical use, the need for improved GBCAs has led to innovations in ligand chemistry and polymer science. We report a novel approach using methacrylate-functionalized DO3A ligands to synthesize a series of copolymers through direct reversible addition-fragmentation chain transfer (RAFT) polymerization. This technique enables precise control over the gadolinium content within the polymers, circumventing the need for subsequent conjugation and purification steps, and facilitates the addition of other components such as targeting ligands. …

Optical Responses Of Hybrid Electromagnetic Nanostructures, Dominic Bosomtwi

Optical Science and Engineering ETDs

Fano resonances result from the interference between a broad background and a narrow state, producing asymmetric scattering profiles. Under specific conditions, destructive interference collapses the Fano resonance width, leading to bound states in the continuum (BICs) that localize light within a nanostructure while maintaining an infinitely high-quality factor (Q-factor).

This dissertation explores the design of nanostructures with multilayer hybrid plasmonic-dielectric metasurfaces using full-wave numerical simulations, facilitating multiple Fano resonances and BICs. By adjusting nanoantenna dimensions, multiple modes are excited at plasmonic-dielectric interfaces, leading to strong interactions and hybridization of energy levels, manifested as Rabi splitting.

These findings enable advancements in …

Factors Influencing Bridge Inspection In Developing Countries, Challenges And Future Directions: A Systematic Literature Review, Tuba Arshad, Dr. Rully Andhika Karim, Ayomi Dita Rarasati

Smart City

Bridges are very important to promote economic growth, mitigate poverty, and address persistent environmental issues. With the construction of new bridges, it is crucial to have an effective bridge inspection procedure. But most developing countries are still struggling in this field. This review examines common factors affecting bridge inspection in developing countries and their impact on bridge condition and performance while exploring strategies to improve those factors in developing countries in a systematic review. A total of 172 articles were identified through an explorative search of Direct Scopus, Google Scholar, and hand-search with limitations of the years 2013 to 2024. …

Membrane Hinges For Deployable Systems, C. Mitchel Skinner

Theses and Dissertations

Origami-inspired and deployable technology has become increasingly common in a variety of applications including satellite and antenna designs for space applications. The drive to utilize ultra-thin materials in the design of these deployable space structures has led to the development of membrane hinges. Membrane hinges show promise as an effective surrogate fold because of their potential advantages including requiring minimal volume and mass, allowing for small bending radii, and functioning without lubricant. Two challenges associated with membrane hinges include reliability after repeated cyclic loading and predictability of a large deployable with radially-unconstrained membrane hinges. The research presented includes the cyclic …

Book Review: Credible: The Power Of Expert Leaders, Carl L. Tolbert

The Journal of Values-Based Leadership

Amanda Goodall’s (2023) book Credible: The Power of Expert Leaders argues why expert leaders are needed more now than ever across all organizational domains. Goodall describes the book as a chronicle of the “natural experiment” showcasing failures of nonexperts leading various sized groups and organizations, also citing parallel success by expert leaders (p. 1). The book is divided into eight chapters, starting with the introduction and examining the need for experts, the recruitment and development of experts, and finally, the organizational environment to sustain experts. The introduction begins as a corollary to Nichols’ (2024) work regarding how society no longer …

Vacuum Assisted Resin Transfer Method, Henry Allen

2024 Symposium

The vacuum assisted resin transfer method (VARTM) is a process used to make composite materials. This process is done using a mold or plate as a base and then building up the rest of the set up from there. On the base is the vacuum seal tape, spiral or percolated tubing, a connector for the tubing, the fiber plies in the center, separation layer, vacuum mesh, and the vacuum bag layer. This setup is then connected to the resin container. The other end is connected to a catch pot and vacuum pump. The purpose of the VARTM guided study was …

Characterizing And Manipulating Intra-Die Performance Variation Of Fpgas And Its Application In Security, Hayden C. Cook

Theses and Dissertations

Field Programmable Gate Arrays (FPGAs) are reconfigurable, high-performing devices that are often used in critical applications. However, like all semiconductors, FPGAs experience transistor aging that can lower performance and lead to device failures. Additionally, device aging also has several security implications. Therefore, understanding the aging mechanisms behind transistor aging is necessary to ensure the reliability of FPGAs. However, current aging studies either rely on simulation alone or are unable to isolate aging effects on specific elements within the FPGA. This dissertation uses the reconfigurability of FPGAs to develop novel aging techniques that allow for the targeted aging of specific areas …

Welcome To Cheney App, Timothy Nelson, Nolan Posey, Tanner Stephenson, Daniel Palmer, Matthew Matriciano

2024 Symposium

Welcome to Cheney is a non-profit organization committed to fostering communication, connection, and action within the city of Cheney. Their primary purpose is to provide timely and accurate information to the residents of Cheney. Welcome to Cheney has tried utilizing other forms of social media such as Facebook and Instagram to share information, but their presence is being overshadowed amidst the noise on those platforms. Therefore, the intention of this project is to develop a mobile app with the sole purpose of being a reliable means of sharing important information with the residents of Cheney.

The information being shared on …

Prediction Of Noise From A Construction Site, Amira Mostafa Ibrahim Miss, Nashwa Mohamed Yossef Prof, Adel Ibrahim Eldosouky Emeritus Professor

Journal of Engineering Research

Construction activities significantly contribute to environmental noise pollution, affecting workers' health and the surrounding community, posing significant challenges to human well-being and productivity. This paper presents a prediction method and a modelling technique used to assess construction site noise. Various factors influencing noise generation and propagation, such as equipment types, operational conditions, site characteristics, and environmental factors, are discussed. This paper explores the application of Monte Carlo technique as an effective method for predicting construction site noise and planning noise mitigation strategies.

Sscm: Self-Secured Cloud Model In Irrigation System, Tahani M. Allam Dr. Tahani Allam

Journal of Engineering Research

The safe installation and startup of irrigation system which linked to the Internet of Things (IoT) over the Internet is a challenging subject to address. This article addresses the safe Internet-based verified configuration of irrigation system in order to offer further value-added services. After reviewing the safe self-configuration constraints imposed on Cloud and IoT technologies, present a Cloud-based architecture that allows IoT devices to communicate with many federated Cloud services. Talk about two scenarios and how federated cloud architecture and one cloud environment interact with Internet of Things devices. The proposed self-secured cloud model of intelligent irrigation strategies for efficient …

Electrospun Ibuprofen-Loaded Blend Pcl/Peo Fibers For Topical Drug Delivery Applications, Diala Bani Mustafa, Tsuyoshi Sakai, Osamu Sato, Mitsuo Ikebe, Shih-Feng Chou

Mechanical Engineering Faculty Publications and Presentations

Electrospun drug-eluting fibers have demonstrated potentials in topical drug delivery applications, where drug releases can be modulated by polymer fiber compositions. In this study, blend fibers of polycaprolactone (PCL) and polyethylene oxide (PEO) at various compositions were electrospun from 10 wt% of polymer solutions to encapsulate a model drug of ibuprofen (IBP). The results showed that the average polymer solution viscosities determined the electrospinning parameters and the resulting average fiber diameters. Increasing PEO contents in the blend PCL/PEO fibers decreased the average elastic moduli, the average tensile strength, and the average fracture strains, where IBP exhibited a plasticizing effect in …

Drop Dynamics And Heat Transfer During Dropwise Condensation On Superhydrophobic Surfaces, Shaur Humayun

Theses and Dissertations

As we seek to address the escalating demand for energy and water, superhydrophobic surfaces have gained the attention of researchers due to their potential to boost condensation heat transfer rates and improve efficiency across various applications. One way to significantly improve dropwise condensation heat transfer rate is to improve drop mobility. Water-repelling properties of superhydrophobic surfaces can help in reducing the size of condensed drops as they depart the surface, thus increasing drop refresh rates by increasing drop mobility. Accurate models of retention forces between drops and superhydrophobic surfaces are needed for predicting drop dynamics including drop mobility. Once drop …

Machine Learning-Guided Design Of Nanolubricants For Minimizing Energy Loss In Mechanical Systems, Kollol Sarker Jogesh, Md. Aliahsan Bappy

Mechanical Engineering Faculty Publications

This study explores the significant potential of machine learningguided design in optimizing nanolubricants, focusing on their application in reducing friction and wear in mechanical systems. Utilizing neural networks and genetic algorithms, the research demonstrates how advanced computational techniques can accurately predict and enhance the tribological properties of nanolubricants. The findings reveal that nanolubricants, particularly those containing graphene and carbon nanotubes, exhibit marked improvements in reducing friction coefficients and wear rates compared to traditional mineral oil-based lubricants. Additionally, the enhanced thermal stability and load-carrying capacity of these nanolubricants contribute to substantial energy savings and increased operational efficiency. The study underscores the …

Telematic Performance In Electronic Dance Music (Edm), Yongsi Wang

Journal of Network Music and Arts

This paper aims to discuss to what extent telematic performances within the framework of the “Beyond Time and Space - London Tokyo Online 2023” initiative serve as a comparative paradigm to physical live performances, particularly in the domains of technical exigencies, artistic expression, and audience engagement.

Central to this study is the “Beyond Time and Space - London Tokyo Online 2023” event, a simultaneous, interactive electronic live music performance connecting physical venues in London and Tokyo. Through JackTrip and Open Broadcaster Software (OBS), this event aspired to explore the applicability and limitations of telematic technology in live electronic music performance …

Kompost*Klang*Küche*: Telematic Worlding With Glitch, Hannah Vyborg Walter, Robert Torche, Cedric Spindler, Eric Larrieux, Patrick Muller

Journal of Network Music and Arts

This paper explores concepts and practices of telematic performances, particularly through the lens of the project kompost*klang*küche*. It emphasizes spatial discontinuity within networked artistic collaborations, as opposed to immersive continuity.

Telematic performance formats utilize network technologies to facilitate low latency artistic endeavors across geographical divides, creating a complex interplay between local, remote, and intermediary spaces. In this context, we interpret spatial configurations from a phenomenological point of view as telematic SPACE in which technical components are in place in three spaces (local, remote and intermediary space) while practiced, embodied and inhabited in an anthropological space, where the overlay and dynamics …

Design Of A Satellite Tracking Mobile App Using Flutter And Android Studio Ide, Audrey Tahwa

USF Tampa Graduate Theses and Dissertations

A pop-up free mobile application was developed utilizing one-minute intervals for positiontracking. Predictions are conducted off-line after the user has connected at least once. In In order to enhance data accuracy, the application includes a feature to download satellite data and update raw data to be used in prediction calculations. Additionally, users receive a notification when the application is ready for offline use.