Digital Commons Network^™

Technology Acceptance Of Virtual Reality For Aircraft Maintenance Training, Lusine Carlsson

Doctoral Dissertations and Master's Theses

A study was conducted to investigate Virtual Reality (VR) technology acceptance for aircraft maintenance training by student mechanics. The study employed a survey methodology using the extended Technology Acceptance Model (TAM) as the theoretical framework. Participants were student mechanics from Federal Aviation Administration (FAA) approved aircraft maintenance schools within the United States. The study attempted to address how the variables of perceived usefulness (PU) and perceived ease of use (PEU) influence the students' behavioral intention (BI) to use VR technology for aircraft maintenance training, and how external variables of self-efficacy (SE), perceived enjoyment (PE), perceived health risk (PHR), performance expectancy …

Virtual Engagement: Can Law Enforcement Benefit From Utilizing Extended Reality In Their Training Systems?, Jacob Maxwell Read

Electronic Theses and Dissertations

Introduction: Extended reality (XR) technologies offer innovative training solutions for various industries, including healthcare, manufacturing, aviation, sports, military, and law enforcement. XR can provide a solution for training where job tasks are difficult or near impossible to train in real-life. A human factors research and design approach could provide an effective, low-risk, and cost and time-efficient option for integrating the use of XR technology into training for many industries. To advance this goal, this research answered two main research questions: (1) What training needs/challenges are best suited for an XR training system designed for law enforcement officers (LEOs)? (2) …

Magnetic Sensor Compensation Utilizing Factor Graph Estimation, Frederic W. Lathrop, Clark N. Taylor, Aaron Nielsen

Faculty Publications

Recently, there has been significant interest in the ability to navigate without GPS using the magnetic anomaly field of the Earth (magnav). One of the key technical bottlenecks to achieving magnav is obtaining an accurate magnetic sensor calibration, taking into account own-ship and sensor effects. The Tolles-Lawson magnetic calibration method continues to be the industry standard and was developed when airborne magnetic survey aircraft were first employed over 70 years ago. In this paper, we present a magnetic calibration algorithm based on a factor graph optimization using inertial measurements as well as inputs from both a vector and scalar magnetometer. …

Ultrashort Pulsed Laser Treatment Is Effective At Sterilizing Metal Surfaces For Planetary Protection, Kaleb Mcquillan

Department of Electrical and Computer Engineering: Dissertations, Theses, and Student Research

To prevent forward contamination from microbes aboard spacecraft intended for exploration of solar system bodies there is a need for effective sterilization methods. However, current techniques are both time-consuming and expensive. For example, dry heat sterilization requires removal from the assembly site and several days of treatment. Furthermore, some components such as optics and electronics are not compatible with current sterilization techniques. In this thesis, a novel femtosecond laser surface processing technique for the rapid sterilization of spacecraft hardware is reported. Femtosecond lasers produce extremely high photon fluxes (10²⁹ photons/s*cm², ~0.03 J/cm²) in extremely short …

Crowdstrike Cyber Incident Vs. Past Major Cyber Incidents: Analysis And Solutions, Priyant Banerjee

Himalayan Research Papers Archive

On July 19, 2024, a technical malfunction in CrowdStrike’s Falcon sensor software led to a global ITdisruption, affecting millions of devices across multiple sectors. This incident, although not a direct cyber-attack, caused significant operational upheavals reminiscent of major past cyber incidents. This paperexplores the CrowdStrike incident in detail, compares it with previous major cyber events, and proposescomprehensive solutions to mitigate such risks in the future.The faulty update from CrowdStrike resulted in widespread system crashes, notably the "Blue Screen ofDeath," paralyzing operations in critical sectors such as healthcare, finance, and transportation. The paperexamines the immediate and cascading effects of the incident, …

Genetically-Encoded Optical Barcodes For Single-Cell Analysis, Daniel Pritko

All Theses

Cell barcodes are capable of being used to answer many different biological questions. They have been used to track the lineage of cells to identifying the function of a gene. While there are multiple different methods to creating cell barcodes, they are limited in their scalability and application. In a previous publication we propose and computationally prove an optical single-cell barcoding method that bridges fast and scalable readouts with the benefits of genetic encoding. In this approach fluorescent proteins (fps) are combined to form fluorescent barcodes that can then be analyzed using a spectral flow cytometer. Here, we test the …

Degradation Products And Microbial Communities Associated With The Conversion Of Five Long-Chain Fatty Acids Relevant For Anaerobic Co-Digestion Of Fog With Sludge, Claire Funk

All Theses

Anaerobic digestion is a technology that allows wastewater treatment plants to convert sludge to energy by recovering the biogas produced during the breakdown of proteins, carbohydrates, and lipids. Furthermore, adding fats, oils, and greases (FOG) through co-digestion with wastewater sludge can increase energy production as lipids have a higher methane yield than proteins and carbohydrates. However, adding FOG can also lead to operational problems in the digester due to the potential accumulation of certain long-chain fatty acids (LCFAs). Current research is limiting in the degradation pathways of prominent LCFAs in FOG and the microbial communities responsible for their degradation

The …

Hands-On For Whom?, Isabella Stuopis, Avneet Hira

Journal of Pre-College Engineering Education Research (J-PEER)

Hands-on technology-enhanced pedagogies have been hailed as a panacea for engaging K–12 students in engineering. We unpack how the entanglement of the sociopolitical with the educational, namely how factors pertaining to resources and individual characteristics, impact engagement with such pedagogies. In particular, we expand upon how school funding, teacher preparation and support, access to out-of- school resources, and family background impact the in-and out-of- school resources students have access to. Further, we explain how characteristics such as a sense of belonging, pedagogical approaches, and assumptions and gatekeeping by adults impact students’ ability to engage with hands-on engineering education. In doing …

Foreword From Editor - 15th Edition, Yandi Andri Yatmo

ASEAN Journal of Community Engagement

In this edition, AJCE thoroughly explores the topic of community engagement programs and their impact, as well as innovative and integrative approaches that highlight their potential to improve the community’s livelihood. This issue features four research articles with unique perspectives on community engagement, one review article that critically evaluates existing approaches, and three case-based articles that explore various concepts further and offer practical insights. The contributors to this edition cover diverse expertise in business and economy, humanity and social sciences, communication, design, and education, presenting a comprehensive range of perspectives on community engagement and its practical implementations.

An Exploratory Single-Case Study Unveiling The Promise Of Artificial Intelligence In Aviation Education, Jorge L. D. Albelo, Stacey Mcintire

Journal of Aviation/Aerospace Education & Research

Higher education institutions continuously seek ways to improve teaching methods and enhance student learning experiences by leveraging emerging technologies in the classroom. One such technology is ChatGPT, an artificial intelligence (AI) application. The integration of this AI technology in aviation education has the potential to transform teaching and learning experiences. This study aims to investigate the acceptance and integration of ChatGPT in aviation education and understand the benefits and challenges associated with integrating such technology. The study employs a mixed methods approach, combining qualitative focus group discussions with aviation professors and a quantitative survey administered to students. The study included …

An Enhanced Deep Autoencoder For Flight Delay Prediction, Desmond B. Bisandu, Dan Andrei Soviani-Sitoiu, Irene Moulitsas

Journal of Aviation/Aerospace Education & Research

Accurate and timely flight delay prediction cannot be overemphasized because of the ever-increasing demand for air travel and its importance in deploying intelligent transportation systems. Nonetheless, there has not been a universal solution to the problem, as more intelligent flight decision systems are required for the aviation industry's future growth. Existing flight delay classification and prediction approaches are mainly shallow traffic models and do not satisfy many applications in the real world. Our motivation to rethink the deep architecture model for predicting flight delays emanates from the problem. In this research, we proposed a technique that modified stacked autoencoder architecture …

Sullivan, Frank Victor, Collection, 1924-2005, Special Collections, Leonard H. Axe Library

Finding Aids

This collection contains materials from the life and projects of Dr. Frank “Vic” Victor Sullivan. They document contributions to: the Sperry Galligher Audubon collection of documents; reports on the planning and construction of the Kansas Technology Center at Pittsburg State University; slides of university trips and family.

Industria 4.0. Internet De Las Cosas: Ciberseguridad Y Aplicaciones, Jairo Eduardo Márquez Díaz, Arles Prieto Moreno, Luz Jaddy Castañeda Rodríguez, Luis Gonzalo Benavides Ramírez

Ingeniería

Este libro explora cómo la Cuarta Revolución Industrial, también conocida como Industria 4.0, está transformando sectores industriales mediante tecnologías disruptivas como el internet de las cosas (IoT), la inteligencia artificial, el big data y la realidad aumentada, lo que ofrece una mayor eficiencia, productividad y seguridad. Aborda los riesgos de ciberseguridad asociados y propone soluciones basadas en la inteligencia artificial y el blockchain. Además, analiza el uso de drones y tecnologías como el LiDAR en la minería, lo que mejora la exploración, la seguridad y la sostenibilidad de operaciones complejas. Con un enfoque en la minería del carbón en Colombia, …

Enhancing Traffic Safety And Connectivity: A Data-Driven Multi-Step-Ahead Vehicle Headway Prediction Leveraging High-Resolution Vehicular Trajectories, Mohamadhossein Noruzoliaee, Fatemeh Nazari, The University Of Texas Rio Grande Valley

Civil Engineering Faculty Publications

Vehicle headway, defined as the time elapsed between two successive vehicles passing a roadway point, is a key mesoscopic-scale measure in traffic flow theory with safety-critical transportation applications, such as preemptive collision avoidance warning systems as well as connected and autonomous vehicle (CAV) platoon control. Hence, it is crucial to accurately predict vehicle headway over sufficiently long future horizons (i.e., multi-step-ahead prediction) to be applicable for downstream safety-critical applications. This is a challenging task due to several random factors influencing headway, including inter- and intra-driver heterogeneity, asymmetric car-following driving behavior, and vehicle heterogeneity under mixed traffic of different vehicle classes. …

3d Printed Mounts For Liquid Microdroplet Resonators, Parker A. Awerkamp

Theses and Dissertations

Liquid microdroplet resonators provide an excellent tool for optical studies due to their innate smoothness and high quality factors, but they can be difficult to control. By using 3D printed mounts to support the droplets, we can obtain precise control over the droplet geometries and positions. We here present our work with oil, water, and ice microdroplets, as well as tools required to enable their study. We first present methods for creating 3D printed mounts for oil microdroplet resonators. The mounts enable precise positioning of the droplets relative to a tapered optical fiber. The oil microdroplet resonators exhibited quality factors …

Comparative Analysis Of The Effect Dual Spark Ignition And Single Spark Ignition On Performance And Exhaust Emissions In Bioethanol-Fueled Engines, Avita Ayu Permanasari, Ahmad Faizal Wahidin, Hasan Ismail, Erwin Komara, Poppy Puspitasari, Gina A. Lorenzo

Journal of Mechanical Engineering Science and Technology (JMEST)

Bioethanol is an alternative fuel that has a high octane value of around 100 to 110, making it difficult to be applied to spark ignition engines directly. So, it is necessary to make adjustments, including increasing combustion efficiency and thermal efficiency of the combustion chamber by increasing the compression ratio and adjusting the ignition system, both in single spark ignition (SSI) and dual spark ignition (DSI) types. The study aims to determine the effect of SSI and DSI applications on engine performance, specific fuel consumption (SFC), and exhaust emissions using 96% and 99% levels of bioethanol fuel. The results showed …

Study Of A Remote Wind Resource Assessment System Integrated With Internet Of Things, Filian Arbiyani, Filbert Filbert, Anthony Nathanael Theo

Journal of Mechanical Engineering Science and Technology (JMEST)

Wind energy is an emerging and popular source of clean energy due to its non-polluting nature and low cost. The efficient use of wind energy requires accurate and precise wind parameter measurements, which is where wind resource assessment (WRA) comes into play. The IoT and cloud-based systems have been applied to remote monitoring systems and provide crucial solutions for data acquisition, storage, and analytics in wind energy technology. This study aims to build a remote WRA system integrated with the Internet of Things. This study utilizes an Arduino Uno microcontroller, RK100-01 wind speed sensor, BMP280 temperature and pressure sensor, and …

Thermal Oxidative Degradation Of Polystyrene Plastics Used For Food Packaging During Incomplete Waste Incineration, Maycee Hurd

Civil Engineering ETDs

We identified the physical and chemical degradation of polystyrene (PS) plastic used for food packaging after thermal oxidative weathering. Open waste incineration is a widely used waste management practice in isolated and underserved communities. However, the generation of partially incinerated plastics and microplastics (MPs) from this practice is overlooked. Near surface XPS C 1s high resolution analyses show an increase in the intensity of peaks greater than 285 eV corresponding to C/O bonds after burning of PS. Bulk analyses using ATR-FTIR show that thermal oxidation decreased the alkene (3040-3000 cm-1) and alkane (3000-2850 cm-1) C-H stretch signals suggesting PS chain …

Understanding Longitudinal Top-Down Cracking To Enhance Asphalt Mix Design, Md Mehedi Hasan

Civil Engineering ETDs

This study focuses on developing a deformation rate-dependent bilinear constitutive equation for cohesive zone modeling of asphalt concrete's fracture process zone to accurately predict the longitudinal top-down crack initiation and propagation. A mathematical model has been developed for the AC materials' deformation rate-dependent cohesive zone fracture characteristics and incorporated into the ABAQUS software as a customized user element subroutine (UEL). The developed model has been validated by comparing the simulation results with the laboratory test results, which show good agreement with the results. In addition, an enhanced asphalt mix design approach, referred to as SP5, has been developed to mitigate …

Analysis Of Ballistic Capability In Making Bulletproof Multilayers Using Woven Ramie Fiber, Hardfacing Metal With Epoxy Matrix For Bulletproof Vests, Rizal Wahyu Permana, Syamsul Hadi, Bima Cahya Maula Dana

Journal of Mechanical Engineering Science and Technology (JMEST)

Bulletproof material in level III bulletproof vests must be created using hard and soft materials to prevent bullet penetration. Kevlar and SiC + PE are imported materials used as armor in bulletproof vests. The use of Kevlar and SiC is very dependent on foreign sources with high prices. An innovation was carried out by making bulletproof material using cheaper multilayer methods involving metal from hardfacing welding as a hard layer and ramie fiber as a soft layer with an epoxy matrix. To see the level of penetration and surface morphology structure in the specimens, 9 variations were made: 3 layers …

More Resilience, More Green Berets: A Quantitative Analysis Of The Effects Of Functional Imagery Training During British Army Commando Training, Emma S. J. Yates

The Plymouth Student Scientist

This study investigates the low completion rates of the British Army commando training course in 2018-2019, recorded at 20%, following concerns raised by course Directing Staff. It examines the relationship between resilience and performance in military contexts and evaluates whether resilience-building interventions can improve completion rates. To establish how completion rates could be improved, sixty-two candidates from three commando training cohorts were recruited and assigned to either a Functional Imagery Training (FIT) intervention or a control group. Interventions were delivered in week one of training with a booster in week five. FIT, a goal-centred imagery intervention, has previously improved resilience-related …

Generative Algorithms For Art And Architecture: A Collaborative Teaching Approach, Sam Keene, Benjamin Aranda

Tradition Innovations in Arts, Design, and Media Higher Education

We will present a course that we have been offering for the past few years that engages art, architecture and engineering students and challenges them to collaborate using generative methods to produce creative work. Our work contributes to the long-term understanding of AI in the arts and design in higher education because we have developed a successful course model focused on collaboration between creatives and technologists that can be replicated at other institutions. Feedback between creatives and technologists has been fundamental to opening new frontiers, giving students the tools to collaborate successfully is tremendously important. We will share example of …

Space Radiation Assessment And Mitigation: Meeting The Growing Demand For Shielding Solutions By Enhancing Models And Exploring Novel Shielding Opportunities, M. Laura Sorgi Johann

Doctoral Dissertations and Master's Theses

The rapid growth of satellite technology and the increasing presence of vulnerable technology and human life in space have highlighted the need for improved shielding materials. Industry standard protocols for shielding are being pushed to their limits as we gain a deeper understanding of the harsh space environment and as chip sizes approach the scale of radiation wavelengths. Furthermore, the commercialization of space is attracting interest from industries such as pharmaceuticals and semiconductor crystal growing, as they explore the potential benefits of zero-gravity production environments. However, the eagerness to develop lighter shielding and the lack of consideration for existing tools …

Series Reports From Professor Wei’S Group Of Chongqing University: Advancements In Electrochemical Energy Conversions (1/4): Report 1: High-Performance Oxygen Reduction Catalysts For Fuel Cells, Fa-Dong Chen, Zhuo-Yang Xie, Meng-Ting Li, Si-Guo Chen, Wei Ding, Li Li, Jing Li, Zi-Dong Wei

Journal of Electrochemistry

Two major challenges, high cost and short lifespan, have been hindering the commercialization process of low-temperature fuel cells. Professor Wei’s group has been focusing on decreasing cathode Pt loadings without losses of activity and durability, and their research advances in this area over the past three decades are briefly reviewed herein. Regarding the Pt-based catalysts and the low Pt usage, they have firstly tried to clarify the degradation mechanism of Pt/C catalysts, and then demonstrated that the activity and stability could be improved by three strategies: regulating the nanostructures of the active sites, enhancing the effects of support materials, and …

Spatiotemporal Distributions Of Typical Contaminants From The In-Situ Pyrolysis Of Tar-Rich Coals, Tian Hua, Zhang Ruolin, Wang Qianji, Wu Xiaoyu, Zhang Lei, Zhang Lingru, Fang Siyuan

Coal Geology & Exploration

Objective and Methods Under high temperatures, oil and gas produced from the in situ pyrolysis of tar-rich coals will migrate toward and accumulate in the overburden strata after passing through the fracture zones on the coal seam roof, causing potential contamination risks for the underground environment. To understand the release and distribution characteristics of typical contaminants generated from the underground pyrolysis of tar-rich coals, this study investigated the typical tar-rich coals from the Shenfu mining area of the Jurassic coalfield in northern Shaanxi Province. Based on data on the stratigraphic structures and lithology and using the self-developed equipment for similarity …

Experimental Investigation Of Heat Transfer And Pressure Drop In Copper Manifold Microchannel Heat Sinks, Yue Qiu, Huigang Wang, Jennifer Carter, James Mcguffin-Cawley, Chirag R. Kharangate

Faculty Scholarship

Over the past decade, various two-phase cooling solutions have been implemented to dissipate power in high heat flux electronic components. The manifold microchannel heat sink is an efficient thermal management solution that reduces heat resistance while also limiting the pumping power. However, there is limited work available on small form factor manifold microchannels with traditional heat sinking materials like copper. In this study, an experimental investigation is conducted to evaluate the heat transfer and pressure drop performance of copper manifold microchannel heat sinks using an environmentally friendly refrigerant, R1233zd(E), as the working fluid. A microchannel plate and a manifold plate, …

Strategic Value And Scientific Exploration Of In-Situ Pyrolysis Of Tar-Rich Coals, Wang Shuangming, Shi Qingmin, Sun Qiang, Cui Shidong, Kou Bingyang, Qiao Junwei, Geng Jishi, Zhang Lei, Tian Hua, Jiang Pengfei, Cai Yue, Liu Lang

Coal Geology & Exploration

Background Given China's significant demand shortfall of oil and gas, numerous constraints on oil and gas supply, an arduous task of green and low-carbon energy transition of coals, tar-rich coals, a type of coal resource integrating the properties of coal, oil, and gas, have great potential for increasing the oil and gas supply of the country. Advances Despite the successful engineering test conducted in Yulin, Shaanxi Province, in-situ pyrolysis of tar-rich coals remains in its exploratory stage. This technology holds great strategic value in two aspects: (1) It enables reduced demand shortfall of oil and gas in China to enhance …

Impacts Of The Caking Property Of Tar-Rich Coals On Their Pore Structure Evolution And Seepage During Pyrolysis, Chang Zhibing, Wang Chuchu, Kuang Wenhao, Tang Ying, Wu Xiaodan, Liu Shuqin

Coal Geology & Exploration

Objective The in-situ pyrolysis of tar-rich coals stands as a technique whereby coal seams are heated underground to produce tar and gas products. During the in-situ pyrolysis, the injection of heating media and the production of tar and gas are affected by the pore structure and permeability of coal seams. Since pyrolysis of caking tar-rich coals is accompanied by the formation of colloids, the pore structure and permeability of caking tar-rich coals differ from those of non-caking tar-rich coals. Methods Caking tar-rich coals were pyrolyzed at 300, 400, 500, and 600 ℃. During the pyrolysis, the pore parameters of the …

Ultrasonic Cigarettes: Chemicals And Cytotoxicity Are Similar To Heated-Coil Pod-Style Electronic Cigarettes., Esther E. Omaiye, Wentai Luo, Kevin J. Mcwhirter, Prue Talbot

Civil and Environmental Engineering Faculty Publications and Presentations

Our purpose was to test the hypothesis that ultrasonic cigarettes (u-cigarettes), which operate at relatively low temperatures, produce aerosols that are less harmful than heated-coil pod-style electronic cigarettes (e-cigarettes). The major chemicals in SURGE u-cigarette fluids and aerosols were quantified, their cytotoxicity and cellular effects were assessed, and a Margin of Exposure risk assessment was performed on chemicals in SURGE fluids. Four SURGE u-cigarette flavor variants ("Blueberry Ice," "Watermelon Ice," "Green Mint," and "Polar Mint") were evaluated. Flavor chemicals were quantified in fluids and aerosols using gas chromatography/mass spectrometry. Cytotoxicity and cell dynamics were assessed using the MTT assay, live-cell …

Waging Peace On The Final Frontier 64th Academy Assembly Proceedings, Space And Defense, Madison Walker

Space and Defense

In October 2022, the 64th annual Academy Assembly at the U.S. Air Force Academy took up the theme of “Waging Peace on the Final Frontier.” The following are proceedings of roundtables held by select undergraduates from around the country on questions of space policy & strategy.