Digital Commons Network^™

Poly(Meta-Phenylene Isophthalamide) Nanofibers: Coating And Post Processing, Wenxia Liu, Mathew Graham, Edward A. Evans, Darrell Hyson Reneker

College of Polymer Science and Polymer Engineering

Electrospun nanofibers have applications in the areas of filtration, composites; biomaterials, and electronics. Controlling the surface properties of these nanofibers is important for many applications. Nanofibers can also be used as unique substrates for observing the growth of deposited films and creating nanoscale structures. In this work, electrospun poly(meta-phenylene isophthalamide) (MPD-I) nanofibers were used as substrates for creating nanoscale structures out of carbon-based materials and metals. MPD-I was used because it can be electrospun into nanofibers with diameters smaller than 10 nm and it has good thermal stability. MPD-I nanofibers were coated with carbon, copper, and aluminum using plasma enhanced …

Sensorless Super-High-Speed Switched Reluctance Generators, Chris S. Edrington, Babek Fahimi, Ray B. Sepe

Electrical and Computer Engineering Faculty Research & Creative Works

Operating at super high speeds emerges as a need in various sectors of industry including military, automotive and home appliances. Generation of electric power at such speeds has the inherent advantage of compactness and elimination of speed adaptation means. Switched Reluctance (SR) drives favor high-speed operation due to their inherent ruggedness and robust structure. In addition, they represent a very long constant power region allowing an efficient operation in a compact form. Moreover, SRM drives can tolerate structural and thermal conditions imposed by the application. Finally, they are inherently fault tolerant due to their modular configuration. To take steps towards …

Development Of Water-Based Ink System For Braille Printing, Saurabh Varma

Masters Theses

The most commonly used system of writing by and for blind persons is called Braille, named after its French inventor, Louis Braille (1809-1952). Braille is comprised of a rectangular six-dot cell on its end, with up to 63 possible combinations using one or more of the six dots. Braille is the only reliable method of literacy for blind persons, because it enables them to read and write by touch¹.

Currently, Braille is printed by special embossers that serve as a printing press. These embossers create Braille output when it is attached appropriately to computers. The speed of these …

Ccr4-Bearing T Cells Participate In Autoimmune Diabetes., Soon H. Kim, Mary M. Cleary, Howard S. Fox, Icos Coporation, Nora Sarvetnick

Journal Articles: Regenerative Medicine

Chemokine receptor expression is exquisitely regulated on T cell subsets during the course of their migration to inflammatory sites. In the present study we demonstrate that CCR4 expression marks a pathogenic population of autoimmune T cells. CCR4 was found exclusively on memory CD4(+) T cells during the progression of disease in NOD mice. Cells expressing the CCR4 ligand TARC (thymus- and activation-regulated chemokine) were detected within infiltrated islets from prediabetic mice. Interestingly, neutralization of macrophage-derived chemokine (MDC) with Ab caused a significant reduction of CCR4-positive T cells within the pancreatic infiltrates and inhibited the development of insulitis and diabetes. Furthermore, …

On Clustering And Retrieval Of Video Shots Through Temporal Slices Analysis, Chong-Wah Ngo, Ting-Chuen Pong, Hong-Jiang Zhang

Research Collection School Of Computing and Information Systems

Based on the analysis of temporal slices, we propose novel approaches for clustering and retrieval of video shots. Temporal slices are a set of two-dimensional (2-D) images extracted along the time dimension of an image volume. They encode rich set of visual patterns for similarity measure. In this paper, we first demonstrate that tensor histogram features extracted from temporal slices are suitable for motion retrieval. Subsequently, we integrate both tensor and color histograms for constructing a two-level hierarchical clustering structure. Each cluster in the top level contains shots with similar color while each cluster in bottom level consists of shots …

Mechanistic Study Of Oxidation Of Hypophosphite On Pt Electrodes By Sniftirs, Tai-Xiang Jiang, Hui-Huang Wu

Journal of Electrochemistry

The oxidation of hypophosphite on a polycrystalline platinum electrode was studied by SNIFTIRS and cyclic voltammetry, the in-situ IR spectra were analyzed as a function of Pt electrode potentials in the solution of 0.5 mol/L H₂SO₄+0.1 mol/L NaH₂PO₂. It was found that the dissociative adsorption of hypophosphite ions occurs on Pt surface, and the oxidation product is H₃PO₄, rather than H₂PO₃^- which was considered to produce on Ni electrodes, thereby a new insight into mechanism of hypophosphite oxidation on Pt in acidic media was …

Development And Design Of Constant-Force Mechanisms, Brent Lewis Weight

Theses and Dissertations

This thesis adds to the knowledge base of constant-force mechanisms (CFMs). It begins by reviewing past work done in the area of CFMs and then develops new nondimensionalized parameters that are used to simplify the calculations required to design a CFM. Comparison techniques are then developed that utilize these non-dimensionalized parameters to compare mechanisms based on stiffnesses, percent constant-force, actual lengths, normal displacements, and feasible design orientations. These comparison techniques are then combined with optimization to define new mechanisms with improved performance and range of capabilities. This thesis also outlines a design process, methods to identify mechanisms that are suitable …

A Comparison Of The Role Of Academic Dishonesty Policies Of Several Colleges On The Cheating Behavior Of Engineering And Pre-Engineering Students, Trevor S. Harding, Donald D. Carpenter, Susan M. Montgomery, Nicholas H. Steneck

Materials Engineering

While universities take a variety of approaches in dealing with academic dishonesty, current evidence suggests that institutions with honor codes have a significantly lower level of self-reported cheating as compared to nonhonor code institutions. This paper focuses on five institutions and their effectiveness in dealing with cheating, specifically among engineering or pre-engineering students. The authors' goal is to provide greater understanding of what institutional approaches appear to be most effective in minimizing cheating among this specific sub-group. The paper presents a predictive model of the extent of cheating among engineering students at these institutions using a variety of variables, including …

A Long-Term Hydrologically-Based Data Set Of Land Surface Fluxes And States For The Conterminous United States, Edwin P. Maurer, A. W. Wood, J. C. Adam, Dennis P. Lettenmaier, B. Nijssen

Civil, Environmental and Sustainable Engineering

A frequently encountered difficulty in assessing model-predicted land–atmosphere exchanges of moisture and energy is the absence of comprehensive observations to which model predictions can be compared at the spatial and temporal resolutions at which the models operate. Various methods have been used to evaluate the land surface schemes in coupled models, including comparisons of model-predicted evapotranspiration with values derived from atmospheric water balances, comparison of model-predicted energy and radiative fluxes with tower measurements during periods of intensive observations, comparison of model-predicted runoff with observed streamflow, and comparison of model predictions of soil moisture with spatial averages of point observations. While …

Focus On The Job In Hand: When Usb 2.0 Technology Is Employed In Test And Measurement Signal Analyzer Hardware, Life Can Become So Much More Simple, Charles Birdsong, Dave Galyardt, James Zhuge

Mechanical Engineering

No abstract provided.

Acuta Enews November 2002, Vol 31, No. 11

ACUTA Newsletters

In This Issue

Quality of Service: Different Strokes for Different Folks.................... Jeanne Jansenius, Univ,. of the South

Internet Telecommunications Relay Services........................ Dave Ostrom, Washington State University

Sailing the Seven "C"s.............................. Mick McKellar, Michigan Technological University

Thanks to Exhibitors for 2007

Tech Talk: Let's Get Shaking on SALT Applications................. Kevin Tanzillo, Dux Public Relations

DC Update....................... Whitney Johnson, Retired, Northern Michigan Univ.

Board Report........................ John Bradley, Rensselaer Polytechnic lnstitute

New ACUTA Web Site Benefits....................... Jeri Semer, CAE' Executive Director

Welcome New Members

A Semi-Infinite Interfacial Crack Between Two Bonded Dissimilar Elastic Strips, Xiang-Fa Wu, E. Lilla, W.-S. Zou

Department of Engineering Mechanics: Faculty Publications

This paper is concerned with a semi-infinite interfacial crack between two bonded dissimilar elastic strips with equal thickness. Solutions for the complex stress intensity factor (SIF) and energy release rate (ERR) are obtained in closed form under in-plane deformations. During the procedure, the mixed boundary-value problem is reduced by means of the conformal mapping technique to the standard Riemann–Hilbert problem. In some limiting cases, the present solutions can cover the results found in literature.

The Aeronautics Education, Research, And Industry Alliance (Aerial) 2002 Report, Brent D. Bowen, Mary M. Fink, Jocelyn S. Nickerson, Uno Aviation Institute

Faculty Books and Monographs

UNOAI Report 02-7

The NASA Nebraska Space Grant Consortium (NSGC) & EPSCoR programs at the University I of Nebraska at Omaha are involved in a variety of innovative research activities. Such research is supported through the Aeronautics Education, Research, and Industry Alliance (AERIAL) and collaborative seed funds. AERIAL is a comprehensive, mulch-faceted, five year NASA EPSCoR initiative that contributes substantially to the strategic research and technology priorities of NASA while intensifying Nebraska’s rapidly growing aeronautics research and development endeavors.

AERIAL includes three major collaborative research teams (CRTs) whose nexus is a common focus in aeronautics research. Each CRT - Small …

Numerical Simulation Of Partial Discharge Propagation In Cable Joints Using The Finite Difference Time Domain Method, David Pommerenke, R. Jobava, R. Heinrich

Electrical and Computer Engineering Faculty Research & Creative Works

In this second of a series of three papers, the authors investigate partial discharge (PD) detection and propagation in cable joints. The complex nature of cable joints leads to errors when PD analysis is carried out using conventional equivalent circuits. The authors use the finite difference time domain method to determine the transient electromagnetic fields caused by simulated PD in model cable joints.

Electromagnetic Scattering From A Gap In A Magneto-Dielectric Coating On An Infinite Ground Plane, George R. Simpson

Theses and Dissertations

The electromagnetic scattering from a gap in a magneto-dielectric coating on an infinite ground plane is analyzed. In this context, the gap forms a break only in the magneto-dielectric slab coating while the ground plane is continuous and unbroken. Volume equivalence is used to convert the gap region to one containing unknown volumetric equivalent electric and magnetic currents. The equivalent problem then is one of these currents radiating in the presence of an unbroken grounded magneto-dielectric slab. A Green's function for this geometry is developed consisting of two terms: a direct coupling term and correction term to account for the …

Screw Dislocation Interacting With An Interfacial Edge Crack Between Two Bonded Dissimilar Piezoelectric Wedges, Xiangfa Wu, Yuris A. Dzenis, Wen-Sheng Zou

Department of Engineering Mechanics: Faculty Publications

This letter is concerned with an interface edge crack interacting with a screw dislocation under antiplane mechanical and in-plane electric loading in a piezoelectric bimaterial wedge. In addition with a discontinuous electric potential across the slip plane, the dislocation is subjected to a line-force and a line-charge at the core. The out-of-plane displacement and electric potentials are obtained in closed-form on the basis of the conformal mapping technique and the solution for a screw dislocation in an infinite piezoelectric bimaterial with a semi-infinite interface crack. The intensity factors (IFs) and energy release rate (ERR) are obtained explicitly.

Acuta Enews October 2002, Vol 31, No. 10

ACUTA Newsletters

In This Issue

Convergence on Sewanee Campus.................... Jeanne Jansenius, Univ. of the South

Tech Talk Free Space Optics............................ Kevin Tanzillo, Dux Public Relations

Cabling: Asset or Liability?................... Diane Santarelli, wireville.com

DC Update.............................. Whitney Johnson, Retired, Northern Michigan Univ.

Higher Ed's Contribution to Cyberspace Security................. Jeri Semer, CAE, Executive Director

Board Report................... John Bradley, Rensselaer Polytechnic lnstitute

Welcome New Members

Recurring Beams In Hollow Metal Waveguides: Paraxial Approximation, Lee W. Casperson

Electrical and Computer Engineering Faculty Publications and Presentations

For optical and near-optical applications in electromagnetics, the directed propagation of waves in free space and in lenslike media is often in the Cartesian form of Gaussian or more general Hermite-sinusoidal-Gaussian beams. It has been shown that recurring (rather than continuing) forms of such beams are possible in the paraxial approximation for certain hollow metal waveguides, in which multiple reflections from the waveguide walls may occur. Limitations on this recurrence behavior implicit in use of the paraxial approximation are considered here, and estimates are obtained for the maximum propagation distance before the onset of significant distortion of the recurring beams.

Nato Code Of Best Practice For C2 Assessment, Dave Alberts, Tim Bailey, Paul Choinard, Andreas Tolk, Gary Wheatley, John Wilder

Computational Modeling & Simulation Engineering Books

This major revision to the Code of Best Practice (COBP) for C² Assessment is the product of a NATO Research and Technology Organisation (RTO) sponsored Research Group (SAS-026). It represents over a decade of work by many of the best analysts from the NATO countries. A symposium (SAS-039) was hosted by the NATO Consultation Command Control Agency (NC3A) that provided the venue for a rigorous peer review of the code. This new version of the COBP for C² assessment builds upon the initial version of the COBP produced by SAS-002. The earlier version focused on the analysis of …

An Intelligent System For Monitoring The Microgravity Environment Quality On-Board The International Space Station, Paul P. Lin, Kenol Jules

Mechanical Engineering Faculty Publications

An intelligent system for monitoring the microgravity environment quality on-board the International Space Station is presented. The monitoring system uses a new approach combining Kohonen's self-organizing feature map, learning vector quantization, and a back propagation neural network to recognize and classify the known and unknown patterns. Finally, fuzzy logic is used to assess the level of confidence associated with each vibrating source activation detected by the system.

Seat Belt Use Compliance In Kansas, Deogratias Eustace, Teresa M. C. Bartel

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

Passenger vehicle occupant restraints are regarded as the easiest and the most effective way of reducing the number of highway fatalities. Strong vehicle occupant protection enforcement laws are regarded as the most effective way to increase seat belt use. The increase in restraint use in the United States and other countries has been largely attributed to mandatory seat belt use legislation. Many fatalities and injuries in motor vehicle crashes could be avoided if more passengers used their seat belts. Studies have shown that primary laws have been more effective in seat belt use compliance than secondary laws. Also, legislation has …

A Lessons Learned Repository For Computer Forensics, Warren Harrison, George Heuston, Mark Morrissey, David Aucsmith, Sarah Mocas, Steve Russelle

Computer Science Faculty Publications and Presentations

The Law Enforcement community possesses a large, but informal, community memory with respect to digital forensics. Large, because the experiences of every forensics technician and investigator contribute to the whole. Informal because there is seldom an explicit mechanism for disseminating this wisdom except “over the water cooler”. As a consequence, the same problems and mistakes continue to resurface and the same solutions are re-invented. In order to better exploit this informal collection of wisdom, the key points of each experience can be placed into a Repository for later dissemination. We describe a web-based Lessons Learned Repository (LLR) that facilitates contribution …

Phase-Sensitive Detection Electronics For Wavelength Modulation Spectroscopy Experiments, Tyrone Pate

Electrical & Computer Engineering Theses & Dissertations

Wavelength modulation spectroscopy (WMS) is a non-intrusive detection technique, which enables the measurement of several parameters such as pressure, concentration, and temperature of a species of interest by analyzing the latter's absorption lineshape profile. The method employs a synchronous modulation and detection apparatus to increase the signal to noise ratio and hence the sensitivity of the measurement. Phase-sensitive detection and demodulation of the signal is performed at the modulation frequency and its harmonics. Research at ODU demonstrates that each particular measurement can be performed optimally at an appropriate harmonic of the modulation frequency. The most suitable harmonic depends on many …

Evaluation Of Kentucky’S You Drink And Drive. You Lose”, Kenneth R. Agent, Eric R. Green, Ronald E. Langley

Kentucky Transportation Center Research Report

Alcohol and drug related crashes continue to be one of the highest priority problem identification areas and considerable emphasis is being placed on programs to impact those types of crashes. Various types of campaigns have been used over the years in an attempt to reduce the number of alcohol-related crashes. Kentucky was selected within the Southeast Region of the United States by the National Highway Traffic Safety Administration to conduct a comprehensive impaired driving campaign entitled “You Drink & Drive. You Lose”. The campaign was conducted around the 2002 Labor Day holiday. The objective of this report was to document …

Methods Of Modifying Lignin In Plants By Transformation With A 4-Coumarate Coenzyme A Ligase Nucleic Acid, Vincent Lee C. Chiang, Chung-Jui Tsai, Wen-Jing Hu

Michigan Tech Patents

The invention pertains to methods of altering growth, lignin content, coniferyl and sinapyl alcohol units in the lignin structure, disease resistance and cellulose content in plants by transformation with a lignin pathway p-coumarate Co-enzyme A ligase (4CL) nucleic acid.

Method For Sintering Ceramic Tapes, Fatih Dogan, Jian-Huei Feng, Lucian G. Ferguson

Materials Science and Engineering Faculty Research & Creative Works

Flexible Setter powder deposition sheets containing Setter powders were developed for Sintering of ceramic articles including tapes by an economical, fast and Simple method. The sheets provide for deposition of a thin and uniform layer of Setter powders on a green ceramic article after burnout of a binder in the sheet. Because of high Strength and low burnout temperature, hydroxypropyl methylcellulose binder is preferred for production of these sheets. Tape cast sheets with low Solids loading can be obtained by optimizing the wetting behavior of aqueous slurries on tape carrier. Setter, powder deposition sheets are of particular benefit in processing …

A Mechanical System For Soil Reconstruction, John Patrick Fulton, Larry G. Wells, Timothy D. Smith

Biosystems and Agricultural Engineering Faculty Publications

One of the most perplexing problems associated with reclaiming surface–mined lands is excessive compaction of soil due to the heavy earthmoving equipment used during the reclamation process. Over the years, some innovative material handling schemes have been devised to limit vehicle traffic during reclamation on reconstructed soil. However, final grading operations can often create root–limiting bulk densities, which affect plant growth and yield. The purpose of this article is to describe a mechanism designed at the University of Kentucky whereby mine soil can be reconstructed without introducing compaction caused by surface traffic in order for the soil to sustain desirable …

Acuta Enews September 2002, Vol 31, No. 9

ACUTA Newsletters

In This Issue

One Year Later at BMCC

Meeting Demands of Tech-Savvy Students......................... Jeanne Jansenius, Univ. of the South

Tech Talk: An Emerging Acronym.................... Kevin Tanzillo, Dux Public Relations

10 Things that Could Influence Your IP-PBX Purchasing Decision Allan Sulking, TEQ Consult Group

Web Site of the Quater

DC Update..................... Whitney Johnson, Retired, Northern Michigan Univ.

Press Takes Note of Higher Ed Telecom Issues.................Jeri Semer, CAE, Executive Director

Board Report...................... John Bradley, Rensselaer Polytechnic Institute

Welcome New Members

Development Of A Finite-Element Stored Grain Ecosystem Model, Michael D. Montross, Dirk E. Maier, Kamyar Haghighi

Biosystems and Agricultural Engineering Faculty Publications

An axisymmetric finite–element model was developed that predicts the heat, mass, and momentum transfer that occurred in upright corrugated steel storage structures due to conduction, diffusion, and natural convection using realistic boundary conditions. Weather data that included hourly total solar radiation, wind speed, ambient temperature, and relative humidity were used to model the temperature, moisture content, dry matter loss, and maize weevil development during storage with no aeration, and with ambient and chilled aeration. Periods of aeration were simulated assuming a uniform airflow rate through the grain mass. Heat and mass balances were used to calculate the temperature and absolute …

Accurate Quantification Of Steady And Pulsatile Flow With Segmented K-Space Magnetic Resonance Velocimetry, Haosen Zhang, Sandra S. Halliburton, James R. Moore, Orlando P. Simonetti, Paulo R. Schvartzman, Richard D. White, George P. Chatzimavroudis

Chemical & Biomedical Engineering Faculty Publications

Conventional non-segmented magnetic resonance phase velocity mapping (MRPVM) is an accurate but relatively slow velocimetric technique. Therefore, the aim of this study was to evaluate the accuracy of the much faster segmented k-space MRPVM in quantifying flow. The axial velocity was measured in four straight tubes (inner diameter: 5.6–26.2 mm), using a segmented MRPVM sequence with seven lines of k-space per segment. The flow rate and flow volume were accurately quantified (errorssteady (r²=0.99) and pulsatile flow (r²=0.98), respectively. The measured velocity profiles and flow rates from the segmented sequence agreed …