Digital Commons Network^™

The Development Of An Interactive Multimedia Based Professional Development, James New

Theses : Honours

The role of the teacher has changed over time such that teachers are asked to augment their own specialist knowledge with skills from other domains, for example information technology. This study has examined the perceptions and experiences of teachers and speech pathologists involved in the production of an instructive Interactive Multimedia (IMM) product to deliver Professional Development (PD). The individuals involved in this project were teachers from the High Valley Language School (HVLS) -a specialised primary school. The study used a social action research methodology, which allowed the researcher to build theories from emergent data. The data collection process consisted …

Wireless Local Area Network Security : An Investigation Into Security Tool Usage In Wireless Networks, Susan Webb

Theses : Honours

Many organisations and individuals installing wireless local area networks (WLANs), which are based on the IEEE 802.11 b standard, have little understanding of the security issues that surround this technology.

This study was initiated to determine how WLAN security issues affect organisations in Perth, Western Australia. The scope of the study was restricted to 802.llb WLANs operating in infrastructure mode, where all traffic is transmitted by wireless access points (APs). This study was conducted in two phases. The general aims of the first phase were to determine the number of detectable WLANs in the Perth Central Business District (CBD) and …

Imaging And Locating Buried Utilities, Hyung Seok Jeong, Carlos A. Arboleda, Dulcy M. Abraham, Daniel W. Halpin, Leonhard E. Bernold

JTRP Technical Reports

The urban underground has become a spider’s web of utility lines, including phones, electricity, gas, cable TV, fiber optics, traffic signals, street lighting circuits, drainage and sanitary sewers and water mains. Utility damages during construction are very significant and on the rise, resulting in construction delays, design changes, claims, property damages, service breakdowns, disruption of neighboring businesses and even injuries and lost lives. The American Institute of Constructors (AIC) reported that damage to utility lines is the third most significant crisis for contractors. The state-of-the-art and the state-of-the-practice imaging technologies that have potential for being applied in locating underground utilities …

Evaluation Of Safety Enforcement On Changing Driver Behavior - Runs On Red (1 Of 2 Volumes), Andrzej P. Tarko, Naredla Lakshmi Reddy

JTRP Technical Reports

Red light running (RLR) is a dangerous act. Approximately 22% of urban crashes at signalized intersections are caused nationwide by RLR. Nearly 1,036 deaths were caused nationwide by RLR in the year 2000. Indiana had no previous research conducted in this area; therefore, this research was aimed at estimating the RLR problem in Indiana. The other objectives of this research included: learning drivers’ opinions on the problem, studying the effectiveness of selected countermeasures, and studying the legal issues related to photo-enforcement. A crash statistics study, telephone survey, and extended monitoring of a selected intersection were the three major approaches chosen …

Evaluation Of Safety Enforcement On Changing Driver Behavior - Runs On Red (2 Of 2 Volumes), Robert C. Zahnke, Maria L. Drake, Jose E. Thomaz

JTRP Technical Reports

Red light running (RLR) is a dangerous act. Approximately 22% of urban crashes at signalized intersections are caused nationwide by RLR. Nearly 1,036 deaths were caused nationwide by RLR in the year 2000. Indiana had no previous research conducted in this area; therefore, this research was aimed at estimating the RLR problem in Indiana. The other objectives of this research included: learning drivers’ opinions on the problem, studying the effectiveness of selected countermeasures, and studying the legal issues related to photo-enforcement. A crash statistics study, telephone survey, and extended monitoring of a selected intersection were the three major approaches chosen …

Involving Engineering With In-Service K-4 Teachers, Theresa M. Swift, Steve Eugene Watkins, Kristine Swenson, Evalee Lasater, Robert Mitchell

Electrical and Computer Engineering Faculty Research & Creative Works

A strong workforce in science and engineering and literate citizens in a technology-based society depends on an educational system that prepares students in science, mathematics, and engineering. Unfortunately, many K-12 students lose interest in such topics early in their school years. Engineering applications can capture the imagination of students and illustrate the concepts in science and mathematics. Level-appropriate resources are as necessary for primary teachers and our young scholars as for teachers and students in higher grades. A model for interaction between engineers and K-4 teachers is proposed. The State of Missouri defines curriculum standards in each subject area and …

Power System Basics For Business Professionals In Our Industry, G. Gross, Peter W. Sauer, Mariesa Crow

Electrical and Computer Engineering Faculty Research & Creative Works

The rapid changes in the business aspects of the electricity industry are making it necessary for engineers to communicate more frequently and more effectively with nontechnical people. With the heightened interest in electric power and energy systems, a broad range of "nonpower" people has expressed a need for a primer on power engineering fundamentals presented in a nontechnical manner. In response, the IEEE Power Engineering Society sponsored the preparation of such a course targeted towards the "business professional." The first offering of this course was in July 2002 as part of the IEEE PES Summer Meeting in Chicago. Power System …

Impedance Boundary Conditions In A Hybrid Fem/Mom Formulation, Hao Wang, Minjia Xu, Chen Wang, Todd H. Hubing

Electrical and Computer Engineering Faculty Research & Creative Works

When numerically modeling structures with imperfect conductors or conductors coated with a dielectric material, impedance boundary conditions (IBCs) can substantially reduce the amount of computation required. This paper incorporates the IBC in the finite-element method (FEM) part of a FEM/method of moments (FEM/MoM) modeling code. Properties of the new formulation are investigated and the formulation is used to model three practical electromagnetic problems. Results are compared to either measured data or other numerical results. The effect of the IBC on the condition number of hybrid FEM/MoM matrices is also discussed.

Treatment Of Chlorinated Volatile Organic Compounds Using Wetland Systems, Gabriel Roderick Kassenga

LSU Doctoral Dissertations

Bench-scale continuous vertical flow column and microcosm studies were conducted to investigate the attenuation potential of chlorinated volatile organic compounds (CVOCs) in constructed wetland soil mixtures prepared from peat, compost and sand and in a pristine natural freshwater wetland soil. The study also determined geotechnical properties of potential synthetic peat mixtures for construction of treatment wetlands for CVOCs. Trichloroethene (TCE), cis-1,2-dichloroethene (cis-1,2-DCE) and 1,2-dichloroethane (1,2-DCA) were the main test chemicals used during the studies. Based on geotechnical and sorption characteristics, two mixtures (one comprised of sand and peat and the other comprised of sand, peat and compost product) were selected …

Solute Transport In A Porous Medium: A Mass-Conserving Solution For The Convection-Dispersion Equation In A Finite Domain, William Golz

LSU Doctoral Dissertations

This dissertation considers the proper mathematical description for the physical problem of a miscible solute undergoing longitudinal convective-dispersive transport with constant production, first-order decay, and equilibrium sorption in a porous medium. Initial and input concentrations may be any continuously differentiable functions and the mathematical system is articulated for a finite domain. This domain yields a mass balance which requires Robin (i.e., third-type) boundaries, which describe a continuous flux but a discontinuous resident-concentration. The discontinuity in the resident concentration at the outflow boundary yields an underdetermined system when the exit concentration is not experimentally measured. This is resolved by defining the …

Rainfall-Runoff Control: Variably Saturated Transport For An Infiltration System Controlling Water Quality And Quantity, Zheng Teng

LSU Doctoral Dissertations

Rainfall-runoff impacted by anthropogenic activities transports significant quantities of particulate, aqueous and complexed constituents. These diffuse, unsteady and stochastic event-based loadings are unique challenges for water quality and quantity control. The design, water quality and quantity functions of a partial exfiltration reactor (PER) utilizing Fe-coated-sand and porous pavement (CPP) is examined specifically across three representative rainfall-runoff events. Total concentrations and mass for metals (Zn, Pb, Cu and Cd), suspended solids, and Chemical oxygen demand were reduced significantly. Rainfall-runoff volume and peak flow were reduced and time to peak was extended. Influent dm/dp ratios based on particle analyses suggest that the …

Electrodeposition Of Nickel-Copper Alloys And Nickel-Copper-Alumina Nanocomposites Into Deep Recesses For Mems, Amrit Panda

LSU Doctoral Dissertations

Electrodeposition is an important component in the fabrication of micro electro mechanical systems (MEMS). Nickel is the most commonly used material to produce three dimensional microstructures and few material alternatives have been demonstrated. In this dissertation, electrodeposited Ni-Cu alloys and nanocomposites are investigated as possible replacements for nickel in microsystems. Ni-Cu alloys are attractive for their corrosion resistance, magnetic and thermophysical properties. Alumina nanoparticulates included into metal matrices improve hardness and tribology of deposits. The Ni-Cu alloys and Ni-Cu-g-Al2O3 nanocomposites were electrodeposited from a citrate electrolyte, both at low and high pH. Electrodeposition experiments were performed in recessed microelectrodes 500 …

The Determination Of Appropriate Phosphogypsum: Class C Fly Ash : Portland Type Ii Cement Compositions For Use In Marine Applications, Pradyot Sudhakar Deshpande

LSU Master's Theses

Phosphogypsum (PG, CaSO₄·2H₂O) is a waste by-product produced during the wet manufacturing phosphoric acid process. Phosphoric acid is manufactured by processing phosphate rock that contains relatively high concentrations of naturally occurring radioactive impurities which makes PG a radioactive material. PG also contains certain trace metals including As, Ba, Cd, Cr and Pb and radioactive contaminants such as Radium²²⁶ and Uranium²³⁸ that pose potential hazard to human health and the environment. According to USEPA, the current allowable disposal method for PG is stack piling. This research was focused on stabilizing PG with Portland Type II …

Design Of Power Efficient Multicast Algorithms For Sparse Split Wdm Networks, Kavitha Devi Buddharaju

LSU Master's Theses

Recent years witnessed tremendous increase in data traffic as new Internet applications were launched. Optical networks employing recent technologies such as DWDM and EDFA`s emerged as the most prominent and most promising solutions in terms of their ability to keep with the demand on bandwidth. However for a class of applications bandwidth is not the only important requirement, These applications require efficient multicast operations. They include data bases, audio/video conferencing, distributed computing etc. Multicasting in the optical domain however has its own unique set of problems. First, an optical signal can be split among the outputs of a node but …

Immiscible And Miscible Gas-Oil Displacements In Porous Media, Madhav Mukund Kulkarni

LSU Master's Theses

Gas Injection is the second largest EOR process in U.S. To increase the extent of the reservoir contacted by displacing fluids, gas and water are injected intermittently - water-alternating-gas (WAG) process, is widely practiced. This experimental study is aimed at evaluating the WAG process performance in short and long cores as a function of gas-oil miscibility and brine composition. This performance evaluation has been carried out by comparing oil recoveries between WAG injection and continuous gas injection (CGI). Miscible (2500 psi) and immiscible (500 psi) floods were conducted using Berea cores, n-Decane and two different brines, namely the commonly used …

Treatment Of Mixtures Of Methyl Ethyl Ketone (Mek) And Toluene Using Continuous And Sequencing Batch Operated Biofilters, Jorge C. Atoche

LSU Master's Theses

During the past decade, biofiltration has increasingly been applied as an air pollution control technology to minimize or eliminate emissions of volatile organic compounds from industrial sources. Although of the ability of this technology to maintain high removal efficiency during relatively steady conditions has been well established for many waste streams, a limitation of this technology has been its inability to maintain high removal efficiency during transient loading conditions typical of industrial operations. In the research described herein, a conventional continuous-flow biofilter (CFB) and a sequencing batch biofilter (SBB) were operated for more than 295 days to treat a model …

Mathematical Modeling Analysis Of Floating Bead Biofilter Applications To Domestic Wastewater Treatment, Qiang Wu

LSU Master's Theses

Floating Bead Biofilters (FBFs) have been applied to aquacultural recirculating tanks and domestic wastewater treatment systems for controlling total ammonia nitrogen (TAN), biochemical oxygen demand (BOD), and total suspended solids (TSS). Support modified media in these FBFs provide a large surface area (1150~1475 m2/m3) so that the active biofilm can be retained in the FBF by attaching to the media surface. Understanding the theories involved in biofilm processes greatly helps in sizing, designing, and modeling of FBF systems. Fundamental biofilm processes like mass transport of various substrates into the biofilm and the substrate utilization within the biofilm were studied. A …

Evaluation Of Static Low Density Media Filters For Use In Domestic Wastewater Treatment, Cynthia Wagener

LSU Master's Theses

Static Low Density Media (SLDM) filters are submerged granular medium filters that contain a static matrix of floating media. These filters provide concurrent biological and physical treatment, and are therefore classified as bioclarifiers. Through different design and operation strategies, SLDM filters may be used for a variety of functions such as: solid-liquid separation alone, organic conversion and solids capture, nitrification and solids capture, and denitrification and solids capture. For operation as an aerobic unit, an external aeration strategy was developed to preserve the static nature of the bed. In this study, SLDM filters treated a highly variable flow domestic wastewater …

The Fate Of Nitrogen In The Marshland Upwelling System, Jeremy Fontenot

LSU Master's Theses

The Marshland Upwelling System (MUS) is an alternative method for coastal dwellers to treat their wastewater. Past studies have dealt with the removal of fecal pathogens from wastewater. However the objectives of this research were to: 1) evaluate the treatment capability of the MUS under high hydraulic loadings and cool temperatures with respect to CBOD₅, TKN, TAN, NO₂^--N, NO₃^--N, TP, and PO₄-P, and 2) determine the ideal flowrate and injection frequency to achieve satisfactory nitrogen removal without hydraulic failure. The artificial wastewater study was performed to evaluate the treatment of …

Evaluation Of Mechanical Fitness For Service Of High Temperature Hydrogen Attacked Steels, Brent Matthew Saba

LSU Master's Theses

A novel approach is introduced in evaluating one of industry’s most complex corrosion phenomena, high temperature hydrogen attack (HTHA). Limited efforts have been made by industry to address this degradation mechanism and even less data are available to properly utilize their evaluation techniques. The predominant fracture mechanics based analysis of HTHA relies on Charpy V-Notch (CVN) impact test data. In the face of limited CVN test data, accurate results are shaky at best. The HTHA evaluation set forth in this paper combines the analysis tools of plastic collapse and both static and dynamic fracture mechanics. The first condition addresses plastic …

Numerical Techniques For Excitation And Analysis Of Defect Modes In Photonic Crystals, Shangping Guo, Sacharia Albin

Electrical & Computer Engineering Faculty Publications

Two numerical techniques for analysis of defect modes in photonic crystals are presented. Based on the finite-difference time-domain method (FDTD), we use plane wave incidences and point sources for excitation and analysis. Using a total-field/scattered-field scheme, an ideal plane wave incident at different angles is implemented; defect modes are selectively excited and mode symmetries are probed. All modes can be excited by an incident plane wave along a non-symmetric direction of the crystal. Degenerate modes can also be differentiated using this method. A proper arrangement of point sources with positive and negative amplitudes in the cavity flexibly excites any chosen …

Simple Plane Wave Implementation For Photonic Crystal Calculations, Shangping Guo, Sacharia Albin

Electrical & Computer Engineering Faculty Publications

A simple implementation of plane wave method is presented for modeling photonic crystals with arbitrary shaped ‘atoms’. The Fourier transform for a single ‘atom’ is first calculated either by analytical Fourier transform or numerical FFT, then the shift property is used to obtain the Fourier transform for any arbitrary supercell consisting of a finite number of ‘atoms’. To ensure accurate results, generally, two iterating processes including the plane wave iteration and grid resolution iteration must converge. Analysis shows that using analytical Fourier transform when available can improve accuracy and avoid the grid resolution iteration. It converges to the accurate results …

A Disjoining Pressure For Small Contact Angles And Its Applications, Qingfang Wu

LSU Master's Theses

A thin liquid film experiences additional intermolecular forces when the film thickness h is less than roughly 100 nm. The effect of these intermolecular forces at the continuum level is captured by the disjoining pressure . Since dominates at small film thicknesses, it determines the stability and wettability of thin films. To leading order, a thin film can be treated as uniform and . This form, however, cannot be applied to films with non-zero contact angles. A recent ad-hoc derivation to include the slope leads to a that allows a contact line to move without slip. This work derives a …

Field Evaluation Of In-Situ Test Technology For Qc/Qa During Construction Of Pavement Layers And Embankments, Munir Darwish Nazzal

LSU Master's Theses

With the coming changes from an empirical to mechanistic-empirical pavement design, it becomes essential to move towards changing the quality control/quality assurance (QC/QA) procedures of compacted materials from a unit weight-based criterion to a stiffness/strength based criterion. The non-destructive in-situ tests such as Geogauge, Dynamic Cone Penetrometer (DCP), and Light Falling Weight Deflectometer (LFWD) can be used as effective tools in the assessment of subsurface conditions and in evaluating the stiffness of pavement materials and embankment. This thesis evaluates the potential use of these three devices to reliably measure the stiffness characteristics of highway materials for possible application in the …

Determining The Effectiveness Of Deceptive Honeynets, Nirbhay Gupta

Theses: Doctorates and Masters

Over the last few years, incidents of network based intrusions have rapidly increased, due to the increase and popularity of various attack tools easily available for download from the Internet. Due to this increase in intrusions, the concept of a network defence known as Honeypots developed. These honeypots are designed to ensnare attackers and monitor their activities. Honeypots use the principles of deception such as masking, mimicry, decoying, inventing, repackaging and dazzling to deceive attackers. Deception exists in various forms. It is a tactic to survive and defeat the motives of attackers. Due to its presence in the nature, deception …

Sistem Penapisan Imej, Rahman Mariati

Student Works (2000-2009)

Sistem penapisan imej merupakan sebuah sistem yang melaksanakan proses penapisan imej iaitu suatu proses menyah-kebisingan yang terdapat pada imej. Pengguna boleh memasukkan imej yang mereka kehendaki ke dalam sistem. Pengguna boleh membuat pilihan samada ingin menggunakan penapisan ruang atau penapisan frekuensi. Proses penapisan imej akan dilaksanakan oleh sistem ini mengikut kemahuan pengguna, Imej akan dipaparkan selepas setiap proses penapisan dijalankan. Pengguna akan dapat melihat hasil setiap penapisan. Pengguna boleh mencetak hasil akhir imej seperti yang diingini. Pengguna boleh membuat pilihan samada inginkan gambar yang lebih jelas atau yang lebih kabur (gambar lebih realistik). Dengan adanya sistem ini proses membuang kebisingan …

Plasma Interaction With Microbes, M. Laroussi, D. A. Mendis, M. Rosenberg

Electrical & Computer Engineering Faculty Publications

The germicidal effects of a non-equilibrium atmospheric pressure plasma generated by a novel resistive barrier discharge on representatives of the two classes of bacteria (Gram-negative and Gram-positive) are discussed. The plasma exposure, while being lethal to both bacterial classes, also produced gross structural damage in the Gram-negative E. coli while none was observed in the more structurally robust Gram-positive Bacillus subtilis. An electrophysical process involving the role of the electrostatic tension on a charged body in a plasma is invoked to explain both observations. Since the efficacy of this electrophysical process depends not only on the tensile strength of …

Chaotic Free-Space Laser Communication Over Turbulent Channel, N. F. Rulkov, Mikhail Vorontsov, L. Illing

Electro-Optics and Photonics Faculty Publications

The dynamics of errors caused by atmospheric turbulence in a self-synchronizing chaos-based communication system that stably transmits information over a ∼5  km free-space laser link is studied experimentally. Binary information is transmitted using a chaotic sequence of short-term pulses as a carrier. The information signal slightly shifts the chaotic time position of each pulse depending on the information bit. We report the results of an experimental analysis of the atmospheric turbulence in the channel and the impact of turbulence on the bit-error-rate performance of this chaos-based communication system.

On The Permeability Inside The Granular Media, Chen-Yuan Chen, Chung-Pan Lee, Cheng-Wu Chen

Journal of Marine Science and Technology–Taiwan

The permeability and resistance characteristics in porous structures with different grain size and shape have been studied experimentally in the paper. Two materials used in the study are crushed gravels and spherical glass balls with four sizes of 5.2 mm, 7. 4 mm, 12.2 mm, and 31.7 mm for gravels and 13.0 mm, 16.0 mm, 25. 0 mm, and 35.0 mm for balls, respectively. The permeability determined from linear Darcy Law shows a strong dependence on flow velocity in addition to grain sizes and shapes. This is not consistent to the traditional definition of permeability that is only a function …

Iodat Analysis Content In Cooking Ingredients Using Iodometry And X-Ray Fluorescence Methods., Nelson Saksono

Makara Journal of Technology

Iodat Analysis Content in Cooking Ingredients Using Iodometry and X-ray Fluorescence Methods. Salt iodization program using iodine fortification into salt method is the best method that is effective and economical to overcome the problems caused by iodine deficiency. However in, its development there are some issues clamed that the use of iodized salt is ineffective since iodine content reduces, even disappear when the salt mix with other cooking ingredients. In order to investigated the existence of iodine in cooking ingredients, a research applying iodometry and X-ray fluorescence methods was carry out. The result obtained by iodometry method showed decreases in …