Digital Commons Network^™

Recent Progress In The Research On Electrodeposition Of Composite Coatings, Xiao-Bing Liu, Xu-Cheng Wang, Yu Chen, Dan-Hong Cheng, Zu-Zhan Yu

Journal of Electrochemistry

Recent progress in the research on composite coatings prepared by electroplating technology is reviewed. The nanoscaled particles, electrocatalytic, photoactive composite coatings are emphatically discussed. The composite coatings prepared by dispersing nanoscaled particles could attain better hardness, wear resistance and corrosion resistance than those of composite coatings which prepared by adding micronscaled particles. As compared with pure metal electrode and alloy electrode, some electrocatalytic composite coatings electrode could markedly reduce the overvoltages of cathodic and anodic electrode reaction. In recent years, the electrocatalytic composite coatings which based on metal oxides and conductive polymer as matrix materials become a newest field of …

Study Of The Influence Of Bulk Properties And Surface Tension On The Deposition Process Of Calcium Phosphate On Modified Stainless Steel, R. Rosmaninho, G. Rizzo, H. Müller-Steinhagen, L. F. Melo

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

In order to reduce the fouling caused by milk during heat treatment, it is important to know more about the deposition process of calcium phosphate, one of the main components of milk fouling, on stainless steel surfaces. The fouling behaviour of calcium phosphate is controlled by several factors related to both the fouling solution properties and the surface characteristics. The present work is focused on the influence of two of these factors: 1) the size and size distribution of the calcium phosphate aggregates formed in solution upon heating and 2) the surface tension values of the deposition surface. It was …

The Practical Application And Innovation Of Cleaning Technology For Heat Exchangers, George E. Saxon Jr., Richard E. Putman

Heat Exchanger Fouling and Cleaning: Fundamentals and Applications

The fouling of heat exchangers not only has a negative impact on heat transfer efficiency but also may restrict the output or production capacity of the facility. Given the cooling medium and the process, heat exchangers may be lightly fouled with organic deposits or may be severely blocked from hardened process chemicals. The probability of success in cleaning the heat exchanger is dependent on the selection of the appropriate cleaning technology under the specific fouling conditions. Early identification of fouling characteristics and a fundamental knowledge of cleaning system capabilities are essential in determining the most effective cleaning technology and the …

Development Of A Systems Engineering Model Of The Chemical Separations Process, Yitung Chen, Darrell Pepper, Randy Clarksean

Separations Campaign (TRP)

Two activities are proposed: the development of a systems engineering model and the refinement of the Argonne code AMUSE (Argonne Model for Universal Solvent Extraction). The detailed systems engineering model will be continuously focusing on the integrated approach to the analysis of the materials separations associated with the TRP Program. A second portion of the project will streamline and improve an integral part of the overall systems model, which is the software package AMUSE. AMUSE analyzes the UREX process and other related solvent extraction processes and defines many of the process streams that are integral to the systems engineering model. …

Yscat Backscatter Distributions, Benjamin E. Barrowes

Theses and Dissertations

YSCAT is a unique ultrawideband microwave scatterometer developed to investigate the sea surface under a variety of environmental and radar parameters. The YSCAT94 experiment consisted of a six month deployment on the WAVES research tower operated by the Canada Center for inland Waters (CCIW). Over 3500 hours of data were collected at 2Γ 3.05Γ 5.3Γ 10.02Γ and 14 GHz and at a variety of wind speeds, relative azimuth angles, and incidence angle.

A low wind speed "rolloff" of the normalized radar cross section (σ°) in YSCAT94 data is found and quantified. The rolloff wind speedΓ γΓ is estimated through regression …

An Implementation Of Field-Wise Wind Retrieval For Seawinds On Quikscat, Andrew S. Fletcher

Theses and Dissertations

Field-wise wind estimation (also known as model-based wind estimation) is a sophisticated technique to derive wind estimates from radar backscatter measurements. In contrast to the more traditional method known as point-wise wind retrieval, field-wise techniques estimate wind field model parameters. In this way, neighboring wind vectors are jointly estimated, ensuring consistency. This work presents and implementation for field-wise wind retrieval for the SeaWinds scatterometer on the QuikSCAT satellite.

Due to its sophistication, field-wise wind retrieval adds computational complexity and intensity. The tradeoffs necessary for practical implementations are examined and quantified. The Levenberg-Marquardt algorithm for minimizing the field-wise objective function is …

Multisensor Microwave Remote Sensing In The Cryosphere, Quinn P. Remund

Theses and Dissertations

Because the earth's cryosphere influences global weather patterns and climate, the scientific community has had great interest in monitoring this important region. Microwave remote sensing has proven to be a useful tool in estimating sea and glacial ice surface characteristics with both scatterometers and radiometers exhibiting high sensitivity to important ice properties. This dissertation presents an array of studies focused on extracting key surface features from multisensor microwave data sets. First, several enhanced resolution image reconstruction issues are addressed. Among these are the optimization of the scatterometer image reconstruction (SIR) algorithm for NASA scatterometer (NSCAT) data, an analysis of Ku-band …

A Field-Wise Retrieval Algorithm For Seawinds, Stephen L. Richards

Theses and Dissertations

In the spring of 1999 NASA will launch the scatterometer SeaWinds, beginning a 3 year mission to measure the ocean winds. SeaWinds is different from previous spaceborne scatterometers in that it employs a rotating pencil-beam antenna as opposed to fixed fan-beam antennas. The scanning beam provides greater coverage but causes the wind retrieval accuracy to vary across the swath. This thesis develops a filed-wise wind retrieval algorithm to improve the overall wind retrieval accuracy for use with SeaWinds data.

In order to test the field-wise wind retrieval algorithm, methods for simulating wind fields are developed. A realistic approach interpolates the …

Calibration Of And Attitude Error Estimation For A Spaceborne Scatterometer Using Measurements Over Land, Clarence J. Wilson Iii

Theses and Dissertations

The NASA Scatterometer (NSCAT) was launched August 20, 1996 aboard the National Space Development Agency of Japan's Advanced Earth Observing Spacecraft (ADEOS). NSCAT's primary mission was to measure radar backscatter over the world's oceans. These measurements are used to generate estimates of ocean wind speed and direction. Scatterometers must be calibrated before their measurements are scientifically useful. However, the calibration of NSCAT must be done in orbit. A new methodology for selecting land regions for use in extended target spaceborne scatterometer calibration is first developed. Next, a summary of the calibration technique used in this thesis is presented. While the …

Azimuth Modulation Of The Radar Backscatter At Near-Normal Incidence, Andrew D. Greenwood

Theses and Dissertations

Radar observations of the ocean surface are becoming increasingly important. Common applications are wind retrieval and global weather forecasting and characterization. Because of the common use of ocean radar measurements, it is important to understand the sensitivity of the backscatter to both radar parameters and surface parameters.

At near-normal incidence angles, it has been assumed that the radar backscatter exhibits little or no azimuth dependence (Colton, 1989). However, recent data taken by the BYU YSCAT radar system suggests that this is not the case. At an incidence angle of 10°, the YSCAT radar data shows from a fraction of a …

The Phase Gradient Autofocus Algorithm With Range Dependent Stripmap Sar, James S. Bates

Theses and Dissertations

The Phase Gradient Autofocus (PGA) algorithm is widely used in spotlight mode SAR for motion compensation. The Maximum Likelihood PGA (ML PGA) algorithm has been shown to be a superior autofocus method. The PGA is restricted to high altitude aircraft. Since lower altitude SARs have significant range dependencies that cannot be ignored, the PGA could not be used. This thesis eliminates the high altitude restriction and extends the PGA for use with all spotlight SARs. The new algorithm is tested with three images. Each image has a unique quality. A desert image provides a low signal to clutter ratio with …

Studies To Improve Estimation Of The Electromagnetic Bias In Radar Altimetry, Justin Dewitt Smith

Theses and Dissertations

In May of 2000 Jason-1, a joint project between NASA and the French space agency CNES, will be launched. Its mission is to continue the highly successful gathering of data which TOPEX/Poseidon has collected since August of 1992. The main goal of Jason-1 is to achieve higher accuracy in measuring the mean sea level (MSL). In order to do so, the electromagnetic (EM) bias must be estimated more accurately because it is the largest contributing error. This thesis presents two different studies which add to the knowledge and improve estimation of the EM bias, and thus assists Jason-1 in achieving …

Uncertainties In Oceanic Microwave Remote Sensing: The Radar Footprint, The Wind-Backscatter Relationship, And The Measurement Probability Density Function, Paul E. Johnson

Theses and Dissertations

Oceanic microwave remote sensing provides the data necessary for the estimation of significant geophysical parameters such as the near-surface vector wind. To obtain accurate estimates, a precise understanding of the measurements is critical. This work clarifies and quantifies specific uncertainties in the scattered power measured by an active radar instrument.

While there are many sources of uncertainty in remote sensing measurements, this work concentrates on three significant, yet largely unstudied effects. With a theoretical derivation of the backscatter from an ocean-like surface, results from this dissertation demonstrate that the backscatter decays with surface roughness with two distinct modes of behavior, …

A Methodology For The Design Of Spaceborne Pencil-Beam Scatterometer Systems, Michael W. Spencer

Theses and Dissertations

Spaceborne scatterometer instruments are important tools for the remote sensing of the Earth's environment. In addition to the primary goal of measuring ocean winds, data from scatterometers have proven useful in the study of a variety of land and cryopshere processes as well. Several satellites carrying scatterometers have flown in the last two decades. These previous systems have been "fan-beam" scatterometers, where multiple antennas placed in fixed positions are used. The fan-beam scatterometer approach, however, has disadvantages which limit its utility for future missions. An alternate approach, the conically-scanning "pencil-beam" scatterometer technique, alleviates many of the problems encountered with earlier …

Using Space Borne Microwave Sensors To Track Large Antarctic Icebergs, Jarom James Ballantyne

Theses and Dissertations

Studying Antarctic icebergs can provide insight into climatic changes of the Earth's frozen continent. Antarctic icebergs are regularly formed by the separations of massive sections of ice from ice shelves and glaciers.

The National Ice Center (NIC) is playing a major role in sea ice analysis and forecasts. As a part of its mission the NIC is using a variety of satellite sensors to track many large Antarctic icebergs. The NIC reports iceberg positions every 15-20 days. However, there are limitations in the NIC's iceberg tracking techniques. The areas covered by the images used by the NIC are limited to …

Ultrasonic Flowmeters In Determination Of Correlation Functions Of Velocity And Ultrasound Wave Fluctuations In Grid-Generated Turbulence, Tatiana A. Andreeva, William W. Durgin

Office of the Provost Scholarship

The paper is devoted to the experimental investigation of the statistical characteristics of the grid-generated turbulence produced in a wind tunnel. Ultrasonic time-of-flight method using dual transducers is utilized to develop a methodology for determination of the correlation functions of turbulent velocity and sound speed fluctuations. The ultrasonic flowmeter equation is considered in the form that includes effects of turbulent velocity and sound speed fluctuations. The influence of temperature inhomogeneities on ultrasonic wave propagation is investigated using a set of experiments with a heated grid. Utilization of high-speed digital data acquisition cards and LabView software for the experiments allows collecting …

Cpt-Based Probabilistic Assessment Of Seismic Soil Liquefaction Initiation., Robb E.S. Moss

Civil and Environmental Engineering

The correlation of seismic field performance with in situ index test results has been proven to be a reliable method for defining the threshold between liquefaction and non-liquefaction. The objective of this research was to define in the most accurate and unbiased manner possible the initiation of seismic soil liquefaction using the Cone Penetration Test (CPT). Case histories of occurrence and non-occurrence of soil liquefaction were collected from seismic events over the past three decades. These were processed to develop improved CPT-based correlations for prediction of the likelihood of “triggering” or initiation of soil liquefaction during earthquakes. Important advances over …

Designing Active Smart Features To Provide Nesting Forces In Exactly Constrained Assemblies, Eric Pearce

Theses and Dissertations

Ever since the design and manufacture of products moved from the craftsman era where individual craftsman designed and manufactured the entire product, to the mass production era, where skilled laborers were crafting interchangeable parts or in some cases single features on interchangeable parts, variation in assemblies has been a major concern to designers, manufacturers, and in a more subtle way, customers. Variation, in the end, affects quality, performance and the cost of products. One particular type of design that is particularly robust to variation is an exactly constrained design.

Several researchers have recently explored the topic of exact constraint design. …

Risk Perception Regarding Energy Production: Factor Structure In A French Sample, Etienne Mullet, Anne Bertrand, Cécilia Lazreg, Sheila Rivière Shafighi

The University of New Hampshire Law Review

[Excerpt] "Considering that energy production is a key factor in the development of nations, it is important to have detailed information on the risks attributed by lay people to the different types of energy as well as the different stages of energy production. This study reports on the structure of risk perception with regard to energy production found among French participants. There have already been many investigations of risk perception related to energy production. . . .

The present study is a direct extension of the Mullet study. A similar, although more complete, set of items was used. These items …

Developing The Next Generation Of Technological Aids To Effective Public Involvement In Public Transportation Planning & Design, C. Anneta Arno Anneta, Keiron Bailey, Ted H. Grossardt

Kentucky Transportation Center Faculty and Researcher Publications

Problem

Public involvement in the design of complex public infrastructure solutions, such as a new light rail line, including stops, stations and transit centers, and associated Transit- Oriented Developments (TOD), often relies on lengthy public meetings during which the complexities and subtleties of design preferences, their articulation and communication is overwhelming to both participants and design professionals. Such gatherings can produce more confusion than clarity for the public and design professional alike, especially when strong personalities highlight differences and discourage compromise and consensus. More effective methods of discerning, developing and evaluating the nature of the public’s different preferences and perspectives, …

Inside Unlv, Gian Galassi, Richard Morgan, Carol C. Harter

Inside UNLV

No abstract provided.

Lumped-Circuit Model Extraction For Vias In Multilayer Substrates, Jun Fan, James L. Drewniak, James L. Knighten

Electrical and Computer Engineering Faculty Research & Creative Works

Via interconnects in multilayer substrates, such as chip scale packaging, ball grid arrays, multichip modules, and printed circuit boards (PCB) can critically impact system performance. Lumped-circuit models for vias are usually established from their geometries to better understand the physics. This paper presents a procedure to extract these element values from a partial element equivalent circuit type method, denoted by CEMPIE. With a known physics-based circuit prototype, this approach calculates the element values from an extensive circuit net extracted by the CEMPIE method. Via inductances in a PCB power bus, including mutual inductances if multiple vias are present, are extracted …

Comparison Of Water And Saltwater Movement In Mortar Based On A Semi-Empirical Electromagnetic Model, Shanup Peer, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

The presence of chloride ions in steel-reinforced structures leads to the corrosion of the reinforcement thus compromising the integrity and strength of the structure. Thus, it is of great importance to be able to non-destructively detect and evaluate the free chloride content in concrete. To that end, an investigation was initiated where two mortar cubes were soaked in distilled water and saltwater solutions, respectively. Their temporal microwave reflection properties were measured using open-ended rectangular waveguides on a daily basis for three cycles, each lasting 35 days. A semi-empirical electromagnetic model was then developed to simulate the reflection properties of the …

Dc Power-Bus Noise Isolation With Power-Plane Segmentation, Wei Cui, Jun Fan, Yong Ren, Hao Shi, James L. Drewniak, Richard E. Dubroff

Electrical and Computer Engineering Faculty Research & Creative Works

Power-plane segmentation is often used for DC power-bus noise isolation in multilayer printed circuit board (PCB) designs. To achieve a desirable noise isolation, different power-plane segmentations can be used. A suitable modeling approach, as well as measurements, were employed in this work to study the noise isolation with several power-plane segmentation designs. The geometries studied include power islands, and totally segmented power planes. The effects of the power-bus noise isolation with different types of power island connections, locations of segmentation, and shapes were analyzed, and compared. The modeled and measured results show that suitable power-plane segmentation can result in significant …

Isomorphic Strategy For Processor Allocation In K-Ary N-Cube Systems, Moonsoo Kang, Chansu Yu, Hee Yong Youn, Ben Lee, Myungchul Kim

Electrical and Computer Engineering Faculty Publications

Due to its topological generality and flexibility, the k-ary n-cube architecture has been actively researched for various applications. However, the processor allocation problem has not been adequately addressed for the k-ary n-cube architecture, even though it has been studied extensively for hypercubes and meshes. The earlier k-ary n-cube allocation schemes based on conventional slice partitioning suffer from internal fragmentation of processors. In contrast, algorithms based on job-based partitioning alleviate the fragmentation problem but require higher time complexity. This paper proposes a new allocation scheme based on isomorphic partitioning, where the processor space is partitioned into higher dimensional isomorphic subcubes. The …

Controlling Lead Exposure During The Process Of Cleaning Aviation Spark Plugs, Curtis E. Beers

Doctoral Dissertations and Master's Theses

This study examines the process of removing lead bromide from aircraft spark plugs and the health hazards associated with the present method of cleaning the lead bromide accumulation from aviation spark plugs. Aviation maintenance technicians can be inadvertently exposed to lead while cleaning the lead bromide accumulation from the spark plug electrode during scheduled engine maintenance.

This study explores controlling the lead bromide particulate matter after it is removed from the spark plug electrode. Various control methods and/or procedural changes that may be employed to control the spread of lead bromide dust throughout the shop environment and the prevention of …

Electromagnetic Modeling Of Saltwater Ingress In Mortar At Microwave Frequencies, Shanup Peer, R. Zoughi, K. E. Kurtis

Electrical and Computer Engineering Faculty Research & Creative Works

Corrosion of reinforcing steel is a major cause of damage and deterioration in reinforced concrete structures. Therefore, as the presence of a sufficient concentration of chloride ions can lead to the onset of corrosion in embedded steel, it is of utmost importance to be able to determine the free salt content and its distribution in these materials. Moreover, it is important to obtain this information nondestructively. Previous investigations have shown the capability of near-field microwave nondestructive evaluation methods, using open-ended rectangular waveguide probes, to evaluate many important properties of cement-based materials. In this Investigation, the temporal microwave reflection properties of …

Bs News

Building Services Engineering

No abstract provided.

Calculation Of The Impedance Of A Rectangular Waveguide Aperture In The Presence Of A Loaded Dipole Antenna Embedded In A Generally Lossy Material, Dana M. Hughes, R. Zoughi

Electrical and Computer Engineering Faculty Research & Creative Works

The use of a combined embedded modulated scattering technique, utilizing a PIN diode-loaded dipole probe, and near-field microwave nondestructive testing technique, utilizing an open-ended rectangular waveguide, has been investigated as a means for determining the complex dielectric constant in which the MST probe is embedded. For this, the formulation of the forward problem of calculating the modulated reflection coefficient, measured at the aperture of the waveguide, is presented here, This formulation is based upon the reciprocity theorem for two antennae, and utilizes the near-field radiation pattern of a rectangular waveguide aperture and current distribution along the length of a dipole …

Short-Term Water Use Dynamics In Drainage Lysimeters, Musa V. Dlamini

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Turfgrass water use (seasonal turfET) and crop coefficients were determined and a mathematical soil-water balance model for non-weighing drainage lysimetcrs, which simulates the occurrence (timing and amount) of drainage, was developed. Pairs of non-weighing drainage lysimeters were used to determine crop coefficients for turfgrass in four locations in the state of Utah: Logan Golf and Country Club, Murray Golf Course, Brigham Young University (Spanish Fork) Experiment Farm, and Sunbrook Golf Course (St. George).

Daily weather data including air temperature, relative humidity, average wind travel, total solar radiation, precipitation, and average soil temperature were collected with an electronic weather station at …