Digital Commons Network^™

A Numerical Method For The Solution Of Cylindrical Shell Structures, Chen-Jow Hsiao

Masters Theses

"Many studies and analyses of shell structures to date have been either so complex and laborious as to preclude their application in practical design problems or so approximate, because of basic assumptions, as to limit their scope of application. Hence, a method of shell analysis which is convenient to use, reasonable in its results and general in its application is really needed. It is the purpose of this study to supply such a method of analysis.

In this investigation it is proposed to replace the shell structure which has an infinite number of degrees of indeterminancy with an analogous framework …

A Mathematical Study Of Voigt Viscoelastic Love Wave Propagation, David Nuse Peacock

Masters Theses

"This research is a mathematical investigation of the propagation of a Love wave in a Voigt viscoelastic medium. A solution to the partial differential equation of motion is assumed and is shown to satisfy the three necessary boundary conditions. Velocity restrictions on the wave and the media are developed and are shown to be of the same form as those governing the elastic Love wave"--Abstract, page ii.

Two-Dimensional Seismic Model Studies, Joong Hee Chun

Masters Theses

"The purpose of this research was to design and construct apparatus suitable for two-dimensional seismic model studies.

A new technique for two-dimensional seismic model testing was devised which allows wide application of the equipment. This enabled the author to place the source and receiver in any desired position on the model, thereby permitting the recording of seismic events as function of distance and depth at any position

Two simple geometric models were tested to demonstrate the experimental range of the apparatus designed. The recorded data were compared with theoretical predictions and were found to be in good agreement"--Abstract, page ii.

Proceedings Of A Summer Institute In Water Resources: Volume 1 - Philosophical, Institutional, And Legal Aspects Of Water Resources, Cleve H. Milligan, Charles E. Corker, Wayne D. Criddle

Reports

Foreward: Recognizing the need for training of individuals to meet the rapidly rising problems connected with water resources development, Utah State University, with National Science Foundation support, organized a Summer Institute in Water Resources for college teachers. it was hoped that participants carefully selected from all regions of the country would receive additional insight and stimulation to improve and enlarge water resources training programs at their own institutions. Thus, the accelerated dissemination of such knowledge on a national scale could be facilitated. Realizing further that the key to a successful institute of this nature lay in the excellence of its …

Hydrologic Instrumentation And Telemetering, Duane G. Chadwick

Reports

The following report discusses the various phases of work carried out by the Utah State University under a cooperative agreement contract with the Soil Conservation Service for the period extending from June 1965 to June1966.

The body of the report discusses instrumentation techniques employed for the remote telemetering of total precipitation and water content of snow. Discussion of performance of a new type pressure pillow is also given for measuring the water content of snow. Data taken during system evaluation is presented in the Appendix.

Catalytic Effects On Radiation-Induced Polymerization Of Methyl Methacryalate, David E. Bartine

Masters Theses

"A study has been made of the effect of Kaolin clay particle size and acidity on the degree of radiation-induced polymerization of methyl methacrylate. The results indicate that the degree of polymerization varies with the clay particle size, and that the amount of polymer produced is influenced by the pH of the clay"--Abstract, page ii.

Laboratory And Field Evaluation Of The Nuclear Moisture And Density Meters, T. G. Williamson, Matthew W. Witczak

JTRP Technical Reports

No abstract provided.

Evaluation Of Delays And Accidents At Intersections To Warrant Construction Of A Median Lane, Robert B. Shaw

JTRP Technical Reports

No abstract provided.

Effects Of A Change In The Control Device On Intersection Accidents, George W. Schoene

JTRP Technical Reports

No abstract provided.

Extension Of Road Test Performance Concepts, Milton Edward Harr, William Joseph Head

JTRP Technical Reports

No abstract provided.

Factors Influencing The Application Of Nuclear Techniques To Soil Compaction Control, T. G. Williamson

JTRP Technical Reports

No abstract provided.

Correlation Of Design Characteristics And Operational Controls With Accident Rates On Urban Arterials, Thomas Mulinazzi

JTRP Technical Reports

No abstract provided.

A Laboratory Investigation Of The Structural Design Of Bituminous Mixtures : Progress Report, Herbert William Busching, William Harner Goetz

JTRP Technical Reports

No abstract provided.

Evaluation Of Safety At Railroad-Highway Grade Crossings In Urban Areas, William D. Berg

JTRP Technical Reports

No abstract provided.

Scheduling Traffic Signal Maintenance: Technical Paper, Thorold G. Smith, Joseph C. Oppenlander

JTRP Technical Reports

No abstract provided.

A Theoretical Approach To The Problem Of Determining Ejecta Volumes In A Gravitational Vacuumed Half-Space, William J. Karwoski

Doctoral Dissertations

"The formation of an explosion crater is a highly complex process. All of the pertinent parameters governing the mechanisms of cratering are not clearly understood or known. Many cratering experiments were performed in desert alluvium in an effort to relate crater dimensions with charge weight and depth of burst. Various scaling laws were devised in an attempt to correlate the data gathered from these experiments. When cube-root scaling was used to correlate results of tests conducted at a constant scaled depth of burst, larger charge weights consistently gave smaller scaled results. This was particularly true of apparent crater volume. When …

Electrodialysis Of Tomato Juice, Raghunath R. Khetan

Masters Theses

"Thermal decarboxylation of carboxylic acids has been helpful in illustrating some fundamentals of reaction kinetics in solution. It has been important in formulation of the theory of unimolecular reactions. It is also used frequently in the synthetical methods of organic chemistry.

In a recent study of the anodic oxidation of malonic acid in sulfuric acid at 80⁰C using a platinum anode, the interpretation of some results was impossible due to the spontaneous decomposition of the malonic acid. As no information is available in the literature about decomposition rates of malonic acid in sulfuric acid at the concentrations used, it was …

Mass Transfer In Droplets With Turbulent Internal Circulation - Mathematical Description, Jayantilal Mohanbhai Patel

Masters Theses

"This investigation was carried out to check the accuracy of the eigenvalues, λ_n, calculated by Wellek and Skelland, using some method other than the Rayleigh-Ritz technique and also, to determine the coefficients, B_n in series solution, which were not calculated before.
The eigenvalues were obtained by trial and error procedure using the standard Runge-Kutta method. The coefficients B_n were obtained by using eigenvalues. By using this information the fractional extraction was calculated as a function of droplet contact time.

The Wellek-Skelland modification was also solved by finite difference technique to compute fraction extracted as a function …

The Effect Of Moisture On The Compressive And Tensile Strength On A Variety Of Rock Materials, Richard A. Martin

Masters Theses

"The effect of moisture on the strength characteristics of rock materials has been neglected in the study of rock mechanics. This study was undertaken to determine if there was any effect on the compressive and the tensile strength of rock by varying the moisture content from an oven-dried to a saturated condition.
It was found, by testing eight different rock materials that the compressive strength per unit area decreased with an increasing moisture content. The tensile strengths per unit area, with the exception of the quartzite and the porphyry samples, also decreased with an increase in moisture content. The tensile …

Analysis Of Time-Varying Linear Multipole Filters With Sampled Nonstationary Random Inputs, Ming-Chwan Chow

Masters Theses

"In this thesis an analytical method is developed to determine an optimum time-varying linear filter in order to satisfy the following specifications. The filters are of sampled data multipole form with n inputs and m outputs. The signal of each input is a member of a nonstationary random process, and the signal is corrupted by stationary noise.

The statistical optimization theory developed by Wiener is extended to a linear time- varying filter with nonstationary input. Correlation functions are defined for nonstationary ensembles. The mean- square error is calculated in terms of these correlation functions. By minimization of the mean-square error, …

A Periodic Dielectric Rod Antenna, Robert C. Peirson

Masters Theses

"The periodic dielectric rod antenna structure under consideration consists of identical dielectric rod sections of radius a meters situated on a common axis. These sections are of length 1₁ meters and are separated in free space by distance 1₂ meters.

Field analysis employing Floquet's theorem, in terms of the exemplary TM₀₁ circular mode, gives expressions for the various field components and an eigenvalue equation. Digital solution of this eigenvalue equation establishes the location of propagation bands as a function of frequency. Such bands are characteristic of any periodic wave guiding structure."--Abstract, page ii.

Modal Characteristics Of A Vibrating Truss, Edd Leighman Ghent Jr.

Masters Theses

"In this thesis, a complete technique is presented for the vibration analysis of any planar structure which can be classified in the broad category of trusses or frames. Although a theoretical backdrop is included for the' sake of completeness, the intent is to provide a technique that is readily adapted to computer usage and can be handled with a minimum of confusion or misunderstanding.

The problem is solved by the use of a displacement technique wherein the inertia and stiffness properties of a structure are calculated by superimposing the contributions of each component of the structure. The calculation of these …

A Method For Approximating A Specified Impulsive Response, Charles A. Gross

Masters Theses

"Given a system's time response, y(t), to a unit impulse, a method is presented by which an approximating function y*(t) may be determined. It is inherent in the method that the transform function Y*(s) is rational. The poles of the approximating function are found from the coefficients of a difference equation, which is made to fit the given data in a least mean square error sense. The zeros are determined by a procedure based on the fact that at a given time the given function and its approximate derivatives are known. Accuracy and implementation of the method are investigated primarily …

The Effect Of Non-Linearity On A Frequency-Modulated Wave, Tzu-Tien Hung

Masters Theses

"A method is presented for finding the effect of a nonlinear characteristic of a device on a wave which is frequency modulated by only one sinusoidal modulating wave. The distortion in the output has been found by passing a frequency-modulated wave (which is represented by a summation expression for the spectrum components) through a non-linear circuit having a Fourier series represention of its Characteristic. Two cases have been considered: (1) a nonlinear output-input characteristic, and (2) a non-linear amplitude-frequency characteristic"--Abstract, page ii.

The Anodic Behavior Of Zinc In Aqueous Salt Solutions, Yun-Chung Sun

Doctoral Dissertations

"The increasing demand for protective metals as coatings and non-corrosive alloys has caused extensive research on the fundamental behavior of metals in corrosive media. The problem of controlling the destructive process of metallic corrosion still exists and becomes urgent in this space age. The desirablity of metals such as beryllium, magnesium, and zinc in air frame and space structural units, because of their high strength to weight ratio, has been responsible for the considerable progress in their technology in recent years.

The basic mechanism of the anodic dissolution of metals such as zinc, cadmium, and magnesium in salt solution is …

The Anodic Dissolution Of Cadmium In Aqueous Solutions, San-Cheng Lai

Doctoral Dissertations

"The purpose of this investigation was to study the effect of cadmium ions on the anodic dissolution of cadmium in salt solutions of ·constant ionic strength. The concentration of the cadmium ions was varied from 0.001 to 1 N and the current density ranged from 0.001 to 0.1 amp•cm^-2. The temperature was controlled at 25°C.

....A mathematical model was postulated expressing the anodic dissolution rate as the sum of electrochemical, local corrosion, and disintegration rates."--Abstract, page iii.

The Statistical Mechanics Of Kink Interactions, Michael Brewer Mcneil

Doctoral Dissertations

"Using a potential derived from continuum elasticity, the interactions between kinks on a dislocation line are studied as special cases of the problem of a one-dimensional system of interacting particles. By the use of constant pressure ensembles, the principal kink-interaction problems of physical interest are solved. The application of these solutions to the theoretical analyses of work hardening and internal friction is explored and comparisons made to previous work in which kink interactions were neglected; it is found that, as would be expected, variations of equilibrium kink populations with external stress cannot account for the Bordoni peak, which must therefore …

Numerical Solution Of Water Hammer Analysis Including Friction Losses, Lih Hsun Weng

Masters Theses

"The water hammer phenomena is a very important problem in pipe lines and gate operations. There are many analytical solutions tor water hammer problems including friction losses, but most of them use a linear approximation tor the friction effect that is different from the actual situation. Also the existing methods for solving water hammer problems involve difficult mathematical operations that are impractical and inaccurate.

In order to find a more rapid method for solving water hammer problems including friction losses and to obtain closer agreement with the actual condition, the problem is solved here using the basic partial differential equations …

An Investigation Of Failure Patterns Of Layered Specimens Loaded In Uniaxial Compression, Narendra Y. B. Choudary

Masters Theses

"Uniaxial compressive strength for two and three-layered specimens was obtained with different thicknesses of layers and also for different length to diameter ratios. The fracture and failure pattern was studied. Shear and extension fractures were observed in the layers. Geometry and end conditions of the specimen had a great influence in the failure and fracture pattern.

The uniaxial compressive strength of a layered specimen was found to be lower than the weighted average strength and either low or high when compared to the arithmetic average strength, depending on the ratio of the heights of the layers. The compressive strength of …

The Constant Impedance Tapered Lossless Transmission Line, Yu Kuo Chen

Masters Theses

"Considerable work has been done on the theory and development of the distributed RC network which is a special case of the general distributed network type of transmission line.

Sir William Thompson analyzed telegraph cables, assuming the RC line as a model. Oliver Heaviside made numerous contributions to transmission line theory. The solution of a two-wire transmission line with constant parameters R and C is obtainable by direct solution of the telegraphist's equations which are developed from the equivalent circuit of an incremental length of the network. The sinusoidal steady-state solutions of certain tapered RC lines have been exhibited. The …